Wireless audio system [Pt. 7] - Sennheiser ASA 1 & AC3

[@BrookValentine]

Even though I don't speak Italian, the flow chart style of the diagrams helped me a lot. Thanks for the graphics.

[@davideeriococchi4961]

Brook Valentine You're welcolme Man!

[@ReneAstorga]

this is actually hilarious. hahahaha. I feel the same way. the graphics really helped out. way to go.

[@Crib5]

I have to build the cascade today, this was the first tutorial I saw in youtube. Grazzie mille from finland

[@potatoman1302]

Dude, best video, thanks!

[@hotung4602]

TQ FOR YOU INFORM..

[@francescosk9606]

Gran bel tutorial!

[@hrtube23]

Thanks so much!

[@harrywilcock2030]

Legend thanks. Great subtitles and flow charts! The only bit I didnt quite understand, is where it says 14 antennas less than the normal settings. Can someone explain this, cheers

[@harrywilcock2030]

I think another thing to note here is Davide has numbered this left to right which is standard way to work, but the left connector on the RX unit is actually Ant 2 and the right connector is Ant 1, not sure if this makes any difference, maybe not, maybe on any internal settings, but im going to send the A connections from the left hand ASA to the right hand connector on the receiver to keep it the same.

[@saiprashanth1749]

How Can I casecade the Senn .iem transmitter I need to use 32 iem body packs I have ac 3200 antenna combiner

[@sangtran6146]

Dear Davide Erio Cocchi, I would like to ask a question: How many maximum receiver and transmitter ew 100 G4 can i set-up for one single room (with antena, booster, splitter, combiner,receiver,..) ? Please help me out and teach me more detail about it. as i read document on sennheiser website it said that: it have 20 frequency banks, each with up to 12 factory-preset channels, inter-modulation free, 1 frequency bank with up to 12 user-programmable channels. (So as I understood this mean i can set-up maximum to 12 channel x 20 frequency bank = amount receiver. Am I correct or wrong?) Thank in advance.

[@davideeriococchi4961]

HI Sang Tran. There are many types of ew 100 G4-x, and I can show to you an example on order to simplify the answer: - ew 100-G4 A-band work on A-band (516-558MHz): with 20 ew A-band in the same room you are at the product's maximum possibility. You have 42MHz/20ch=21KHz (the audio frequency that you can heard). If you need to add other ew, you have to change the band of the G4, in order to have other 20 channels (on other 20 frequency). Example: if you need 63 transmitter, you have to buy 20 G4-A, 20 G4-E, 20 G4-F, 3 G4-G Excuse me for my english mistake, i hope that you have understood everything, otherwise reply at my comment! Davide

[@sangtran6146]

Dear @@davideeriococchi4961 , From bottom of my heart, I woud like to thank you so much for your answering. But i'm still struggle with some question, could you please help me out? 1. As you said with Ew- 100-G4 we can have maximum 20 Ew-100-G4 in the same room. So how about Ew-300 G4 and Ew-500 G4 How many maximum can we put in same room? please teach me more detail about it. 2. And from your example if i wanna have 63 transmitter in same room i have to buy 20 G4-A, 20 G4-E, 20 G4-F, 3 G4-G. Beside it i have a question: All 63 transmitter will use the same antena, splitter, combiner in the same room OR each band A, E, F, G have to have separate antena, splitter, combiner ? Thank and Best regards

[@davideeriococchi4961]

@@sangtran6146 1) Remember that both ew-300 and ew-500 work on a determined band frequency, and for this reason it doesn't matter which Sennheiser's product you chose (300/500) because if ew300/500 have the same frequency band, it is as if you were thinking about the same product, so the limit of transmitters is always the limit of channels available on the receiver. 2) I recommend to split every single frequency band on a different receiver antenna.

[@vaqiftahmazov6359]

Hello Can we use this splitter for AKG wireless microphones?

[@davideeriococchi4961]

Yea, sure. But even AKG have the same product!

[@vaqiftahmazov6359]

Thank you and one more question i have 3 Asa splitter can use 12 recievers with Asa?if yes How can i set up them?

[@franknavarro8870]

Hola, como puedo hacer cascada con dos AC41 para usar una sola antena? 🙏

[@NovaNDirman]

How long maximum cable (coaxial 50 ohm) can be used??

[@davideeriococchi4961]

NovaN Dirman It depends from the power of the RF amplifier and the power of the amplitude of the signal.

[@xiiibog472]

OMG