Wireless DMX Install Tutorial - Simply Frank Da Mad Scientist

Wireless DMX Install Tutorial by Simply Frank Da Mad Scientist
(Credit to my Boy Johnny Black and Jason Garcia for coming up with the idea for that name)
This video is an overview of how to add the wireless DMX capabilities to your lights.
I've done this ALL my moving heads and all my older Up Lights that came with out the wireless DMX option.
How to Repair Bad LEDs on Uplights
• How to Fix your Wirele...
.............................................................................................................
Simply Frank Da Mad Scientist
Bilingual Wedding DJ in Houston
www.fhpentertainmet.com
.............................................................................................................
Disclaimer: All lights are different so only intent doing this to your lights at your own risk.
.............................................................................................................

[@fpvzone8522]

If there is a transmitting light can it be wired with DMX Out to other Lights at the same time while it sends the signal? Good tutorial👍

[@DJFrancisco]

Yes, I do this all the time... I actually hook up my led uplight inside my truss so it can receive DMX, and send it up to the top of my truss to the moving head

[@visualmakersproducciones3418]

Hi! nice video I have a query, the transmitter is a console with the wireless dmx integrated? or did you adapt an antenna of these? could you explain how you transmit? Thank you

[@djfred24]

the dmxcart cna transmit and receive itself

[@DJFrancisco]

Yes

[@user-zk2yu3vd5j]

Hello, thanks for the tutorial. Do you think it's possible to add a rechargeable battery to it ? If so what is the voltage needed for this light fixture ?

[@DJFrancisco]

I have never tried that, I would probably need to know where the voltage converts from AC to DJ and then measure it... That's a little more complicated than I can do

[@DHL2002]

i want to make wireless DMX balls where thes 8 double a battiers suppling power to a DMX to led strip decoder, how would i power one of these boards with this.

[@DJFrancisco]

You can use a rechargeable battery such as the Lithium Ion 18650s or 3 AA Batteries in Series to get you to 4.5v

[@abo7uson]

im thinking of doing this project.. what type of moving head did u convert to wireless?

[@DJFrancisco]

chinese 90 watt generics

[@djaerox7574]

Is the also a Video Converting moving Heads? What is, if i want to go one time with dmx cable but installed the wifi module at Same time (e.g. In case my transmitter Crashs) Great Job& Video.

[@DJFrancisco]

Yes

[@chaliHustles]

I have a ADJ tripar profile. how did you find 5 volts what were you looking for?

[@DJFrancisco]

I don't have an ADJ Tripar, or else I would check for you, but there are some IC chips on the broads... some will have $5v going through one of the pin... Either that or look for a 7805 transistor and that one for sure will have 5v

[@djfred24]

on the 8 feet chip you will get the 5v i have the picture i can send you for the 5v

[@chaliHustles]

also what type transmitter will pick up these receivers and type lighting program do you use for computer

[@DJFrancisco]

For the program on this video, that one is called Q+ Light show (something along the lines) I loved it but it's not 100% working with my moving heads. The other program I use now is freestyler. Most Wireless DMX receivers are transmitters as well, They are smart... if they detect a dmx signal present on the pins... they automatically transmit... if they detect a dmx signal that is already being transmitted wireless, they become receivers..

[@nelsonpollard4435]

Charlie Valenzuela

[@djdnewworld]

Can you post a link for the light on where you purchase it from?

[@DJFrancisco]

I would not suggest you buy these lights.. They are from ebay.. 4in1 RGBW led Lights..

[@erickc2589]

Hi, what kind of led controller is that one on this video? looks like a sony psp

[@DJFrancisco]

It's Called the Numark Orbit Controller... wireless midi device, it was really cool... www.numark.com/product/orbit

[@DJBazza1968]

do you have a link to the dmx board please?

[@DJFrancisco]

I purchased directly from china, but I can show you something similar on amazon... www.amazon.com/Wireless-Transmitter-Receiver-Modules-Controller/dp/B093FXH6W6/ref=sr_1_2?dchild=1&keywords=wireless+dmx+board&qid=1622851322&sr=8-2

[@fpvzone8522]

Can they run with Master Slave Mode?

[@DJFrancisco]

Hi FPV Zone, that depends on the light. Most lights do not run wireless dmx on master/slave. Master/Slave is not a DMX signal, but a proprietary signal. I have one company that does run Master/Slave DMX and they can control other wireless lights. But the majority do not run a dmx signal on master slave.

[@nelsonpollard4435]

The DMX pcb has a place for wire connections

[@DJFrancisco]

How do you mean?

[@nelsonpollard4435]

DJ Francisco Perez the pcb board that is attached to the DMX connectors has 3 solder pads with holes for the wire to pass through for soldering.

[@DJFrancisco]

You mean the ones pictured at 6:05 right?

[@nelsonpollard4435]

DJ Francisco Perez Yes sir

[@DJFrancisco]

Yes, you are right, I still prefer to solder to an existing contact.

[@Ensoniqdude]

You need better lighting.

[@DJFrancisco]

Video Is 6 Years old, I needed better Lighting, better camera, and better video editor... :)