Wireless Power Cube

Photonicinduction has a few moments to do the seemingly impossible.

[@Photonicinduction]

I know...It's been too long, life is busy and complicated, women are more complicated than electrics! I should have more time to devote to you tube soon. Thanks for being patient but you tube is not my full time job but soon it might be a part time job :) Best regards to all of you. Andy

[@gregaluise5727]

Glad to see you back! I hope all is well with your life and health!

[@KaienSander10Official]

Welkome back! :D

[@slikrx]

+Photonicinduction - Welcome back! I hope all is well, and glad to see new content. :)

[@therealjammit]

+Photonicinduction Meh. Never thought this channel was your job. I've just like the randomness of it.

[@zaprodk]

+Photonicinduction Glad to see you back. I've missed you!

[@colinfurze]

I'm at home mucking about haha.

[@voltare2amstereo]

+colinfurze thats naughty LOL - mad bunker

[@Photonicinduction]

+colinfurze lol, the man himself, good to see you here mate, you are just s mad, you do know that :)

[@gtaivmostwanted]

You two are what i spend most of my time watching altho colin i cant make half your stuff And photon id probably die lmao keep up the good work

[@gskaloyan]

So glad to see another video from you, it was your videos and your crazy approach to playing with electricity that got me interesting in electricity to begin with. Thanks for sticking around on youtube and mucking about with electricity, and especially for filming it so we can see.

[@voltare2amstereo]

colinfurze and ***** Collaborative vid would be maad!!

[@leokimvideo]

It's amazing what tightly wound rubber bands can do

[@Photonicinduction]

+leokimvideo lol

[@nitro_rc_dude8158]

+Hydravolt Well he hasnt up loaded for a while now and i thought he was recording some thing then he got electracuted during a video

[@nitro_rc_dude8158]

+Hydravolt Lol i didnt see it XD

[@leokimvideo]

Very nice to see you back impressing the internet. Your knowledge is awesome

[@MrEeeaddict]

sick comeback!

[@RingingResonance]

its obviously full of solar roadways.

[@resneptacle]

Or batterizers

[@bennygozz1220]

or it could be powered by Thorium

[@JorgenLePoulpe]

It generates plastic out of thin air and turns it into electricity

[@RingingResonance]

I'm waiting for him to do a followup video only for him to tell us its powered by quantum looping entangled dark matter energy generators.

[@bman12three43]

it is a combination motor and battery, and because the motor spins 400% faster, it generates more power than it receives.

[@arcadeuk]

I love how your living room has gone full mancave since the breakup :)

[@GamerTheTurtle]

looks like a bedroom, but I'd doubt he'd move his transformer downstairs refurbished attic? he's been gone a long time

[@Noodleude]

A fuckton of button cells

[@themaritimegirl]

Nah man 300 potato slices wired in series

[@deathbiscuit2234]

+themaritimeman lol

[@foureyedchick]

Eat your french fries then.

[@vextechnet5865]

😂😂😂😂😂

[@nameistunbekannt7896]

Easy, he used Photonicinduction.

[@ddostesting]

Yup, I'd say a tuned coil via induction.

[@ElectronicsForFun]

photonicinduction would be light via induction. if he was doing this through induction, there would enough static electricity to make him light up. although this is just my theory based off of "photonicinduction"

[@nameistunbekannt7896]

electronics for fun "Photonicinduction" is his channel name. I was refering to his brilliancy.

[@ElectronicsForFun]

NameIst Unbekannt sorry it was the way you phrased it.

[@xjet]

A hamster with a dynamo inside? :-) Nice to have you back Andy.

[@colemanadamson5943]

How I wish this was Tesla's wireless energy transmission.

[@crh231]

You know we have that? It wireless charging, becoming more common in mobile devices

[@housemonkeychill]

that's a good idea

[@pierreuntel1970]

if this was real then you will broke your watches, HDD or anything magnetic sensitive near it because the coil will generate a huge magnetic field

[@cobaltnightmare5920]

+Coleman Adamson In 2020 their will be a charger that will be wireless up to 70 feet that also comes with its own AA and AAA batteries that it that it charges they have prototypes of it that work their just trying to get it down to a reasonable price

[@crh231]

SandPox Wireless charging uses a much lower strength of magnetic field than full on wireless power transmission.

[@slovokia]

Well I guess the options are: battery + inverter, near field magnetic coupling, far field RF coupling. Option 1 is most probable followed by 3 and then option 2 unless you have made your house a giant primary winding for an air coupled transformer. Options 2 and 3 would also have effects on your protoplasm.

[@waterlubber]

+slovokia >effects on your protoplasm Literally microwaving yourself

[@MadPatter66]

I'm going to guess option 2. 60 Hz I don't think will denature your protoplasm. I would think that's his style, and he can summon up the Amps, and the Volts. Don't wear metal near it, or even a clicky pen.

[@slovokia]

+MadPatter66 I don't think an air coupled transformer would transmit enough energy at 60hz - one would probably have to use significantly higher frequency AC to get things to work. I have not done the math myself but I think somewhere in the equations the power coupling is a function of frequency.

[@foureyedchick]

It's 50 Hz rather than 60 Hz. Remember, this is England, not the United States.

[@luaking84]

What if you walk over there with it? xD

[@JFinne9]

99% on LiPo, (or LiFePo or Li-Ion). So the question is, Inverter? Or a Boost converter? The light doesn't care AC or DC obviously. But I don't know that mixer so that motor may be brushed, and also very happy with DC.

[@JFinne9]

+JB Offroad Oh, And welcome back! About time!!!!

[@ElySky95]

I think that, that universal motor is cappable to run on DC power

[@JFinne9]

Yes, if it's a brushed universal motor. Have seen small appliances with brushless A/C motors though, also.

[@JFinne9]

Mixer would have a rectifier, not an inverter, if anything. And you can put DC into an AC to DC rectifier, it just won't change anything. It would be if the Mixer has a transformer and/or an AC brushless motor that it wouldn't work at all.

[@JFinne9]

sailentxx Um... Of course. IF it does have a rectifier, that won't be the only thing in that case....

[@davej6312]

I only recently discovered your videos and find them extremely interesting, entertaining and humorous. Glad you're back!!

[@stanleycarter6275]

Andy great video, glad to see your back with us. 😀

[@electronicsNmore]

You're alive! :-) Great to see you back again.

[@johnlinkman7760]

Thanks for coming back I appreciate your videos.

[@travisheck5979]

thank you for coming back to us!!!!!!!!! one of my favorite channels ever!!! not to mention you are one of the coolest people ever. also the best sense of humor ever

[@travisheck5979]

please keep the videos coming!!!! your fans need your crazy electrical insanity!!!

[@louisturner8842]

Ever?

[@mrclucker1969]

You have bought a cube of compact electricity from National Grid!

[@Heimbasteln]

YESS HES BACK!

[@Zylenxx]

WHOOOOOOOOOOO!!!SMASHBANG COMEBACK! !!!

[@JoshuaSDRitchie]

So great having you back Photon!!! I missed your awesome vids.

[@benkerr9051]

welcome back, only recently found your vids, great fun, nice to see you back making more bangs i hope

[@muh1h1]

i am guessing there is a 3S lipo pack in there and a 230V inverter?

[@depressobbq404]

+WookSlurm yup same here, I cant wait to see him pop it though

[@SamzaNemesis]

+muh1h1 Seems like a supercap in my opinion, also could make him charge it very quickly for another take

[@willyhoogs]

The inverter would need to be huge to run the induction motor in the blender.

[@jackwhite3820]

+willyhoogs It's not an induction motor.

[@therealjammit]

+muh1h1 Why an inverter? All those objects can run off of DC quite well. 160 "AA" will give you 240 DC and be able to run a few amps for about 30 minutes, and 160 "AAA" should be good for a few minutes. The universal motor will run at full speed with less voltage at DC (may need only 80 "AA" to get 120V), and the incandescent lights might be bright enough to look full bright on a sensitive camera.

[@chikenchasa]

You're plugged into the mains and you power it through your hand. Nailed it.

[@cmaylo]

Glad to see you back! Love your videos mate, hope to see more in the future.

[@romansidler]

Great to have you back, Andy.

[@Growveguk]

Great to see you back! My guess is pure DC without any DC-AC Inverter as there is no flicker when you turn on the mixer. The mixer must have a universal motor in it as you can heat the brushes and will fire fine on DC...........

[@Growveguk]

+Andy Mahoney Also as a side note I doubt there is a MSW Inverter in there or you would hear it chopping on the camera when the 150W lamp gets close to the camera ;-)

[@DeoMachina]

GUYS I'VE GOT IT POWER OVER WI-FI

[@TheTwister3000]

+DeoMachina PoE :D

[@SproutyPottedPlant]

+DeoMachina guess this means data over chunky volts is no longer needed.

[@TankCrusher210]

+DeoMachina Power over Fiberglass. Genius. Should've thought of this 20 years ago.

[@David-wh8zs]

+Jeremy Carl I've got the idea: what if someone invents a device which picks up the light from that big lightbulb in the sky and converts it into electricity

[@mr.mandudeguy5389]

+David's Music the sun?

[@Achangedlife2008]

So glad you're back! Cant wait to see what you have next for us Cheers!

[@TailsFurse]

My guess is a small lead acid battery, and a small inverter. Beautifully packaged whatever it is. Can't wait for an update! Good to have ya back! Love the new setup!

[@onesimpleclik]

You're on a list now mate. The men in black suits are watching.

[@Photonicinduction]

+onesimpleclik I've been on that list a while now lol

[@Gunbudder]

ever since you shined that green laser in the air....

[@DanielRenardAnimation]

+Gunhaver -And carved his name into the surface of the moon with dangerous Hospital equipment. ...what? You mean he hasn't yet?!

[@71dembonesTV]

+Photonicinduction LOL. right, that's not something that happened recently

[@MinecraftAndMoreRandomness]

Wow we thought you were gone!

[@Xpp.]

That's pretty insane ! Great to have you back 👍🏻

[@JamesMossR33]

Great to see you back again, been too long. Thanks for this intriguing video. Hope you're good.

[@Natsukashii-Records]

I thought you went in jail for speeding on that scooter.

[@waterlubber]

1:19 The blender is glowing red hot. Someone is really using induction here ;)

[@dimitar4y]

+waterlubber Nah, red light in the background.

[@waterlubber]

Alucard Pawpad aw :(

[@jam9297]

+Alucard Pawpad I think it was a joke lol

[@terawattyear]

Great to see ya alive and well Andy. We appreciate you mate!

[@wysiwyg2006]

great to see you back! life can be tough and complicated! thanks for another good video

[@LazerLord10]

Lithium Polymer batteries can be pretty powerful. I got one that can (apparently) deliver 2.6kW continuous at 18 volts.

[@imsmart.]

How?!

[@imsmart.]

Where?

[@DanceySteveYNWA]

@@imsmart. 18650 lithium ion batteries. Aliexpress? 😂

[@radbot1]

Photon's back! YEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEY! I am almost positive that it runs on some form of electricamity.

[@JohnG1988]

Welcome back Andy. Great to see you on KZbin again.

[@brancarr1]

Glad your back Andy! Looking forward to some videos!!

[@IncroyablesExperiences]

If it is a wireless power transmission you are a genius but obviously it is not ;-) I bet for a 12 V and about 2 Ah Li-Po pack linked to a tiny 200 W inverter. Whatever, the result is quite surprising. Bulb is supplied for minutes and conspirationists are "supplied" for years !

[@Sovereign272]

Thanks for the video see you next year :)

[@ericjx]

Glad to see you back around :) Last video being over 7 months ago you had many of us worried.

[@mancebratton5853]

Resonant inductive coupling, perhaps? It's entirely doable. Interesting vid. It's really great to see you're still doing what you love, Andy, and I hope you never stop. I love your videos, here's looking forward to more high-volts, high-amps mayhem. Take care and good to see you again!

[@justPFILcoffin]

You're still alive!! 😺

[@justPFILcoffin]

I look forward to more videos, Mr. Tesla. 😂

[@azrym.]

I know a squirrel on a hamster wheel when I see one

[@dawn1berlitz]

Andy ive missed your madness and your little crazy madman experiments good to see your still alive

[@awyeh1234]

You're back!!!! I got so excited when I saw this video

[@thetimelords911]

"What about light bulb, AND food mixer?" Me: THIS HAS NEVER BEEN DONE BEFORE :O WHAT IS THIS SORCERY???

[@kingkaza]

The sorcery is a lightbulb and a blender

[@Veikra]

Simple, the cube uses a Self-filling-Thorium-bottle-powered-batterisers over a solar roadways inductance

[@portabuddy]

you forgot about how it uses the inverse reactive current in unilateral phase detraction of the Rockwell Retro Encabulator...

[@mcpheonixx]

Great to see you again Andy. Me and my son were talking about you the other day. Both of us are big fans especially my son who loves to " muck about " with electronics at home. Being a husband and a dad of two ruffian boys I know how life can keep you busy. Anyway we look forward to seeing more of your super cool vids. Take care and cheers from GA. USA.

[@RODALCO2007]

Great to see that you are back again. Cool experiment.

[@auzzierocks]

high capacity battery with a boost converter in it

[@auzzierocks]

bulbs and motors like them can run conpletely fine on DC, no need for an inverter

[@Mikej1592]

Tesla would be proud of you m8

[@Liam-ir6xm]

AHHHH Photon, Its good to see ya back mate, and doing the same crazy stuff as usual ;P haha

[@LCdrDerrick]

You're alive! God bless! All the Best and Greetings from Germany!

[@Chriva]

Huge amount of LiPo packs and a step up converter. Dc, modified sinewave or pure sinewave though.. I place my bet on DC :P

[@Chriva]

Revise that! -Holy crap I just saw it glow :O Be careful with that inductance :D

[@AintBigAintClever]

Pause the video and step through it bit by bit, the glow is from the lamp behind.

[@Joshua543215]

Wow. The source must have a low internal resistant - the density of the light doesn't decrease as he turned the mixer on. The source definetly must have alternating current, because of the mixer. I would say it have to be something chemical - like a fuel cell but so small with that power? Instead of that, it have to be induction current - however. Now i notice the huge coils, and the 63A CEE power plug in background! and no noise of them, something strange goes on there.

[@Humza]

+Josh Muhl The mixer's plug can be wired directly to the motor and accept DC. It's very likely a high voltage DC battery, both the universal motor and lamps can run on high enough DC. If I had to guess it would be some LiPo batteries.

[@Codster]

+Josh Muhl The coils are variable AC transformers attached to one of Photon's power supplies for variable output. They allow for monstrous power but most likely not capable of creating an electromagnetic field strong enough to power this box. If that was the case, the field would be so strong his camera probably would not be capable of recording. Definitely a (few) low internal resistance, high discharge batteries with an inverter. These batteries must have a high C rating to have the capability of drawing so many amps (or they're paralleled).

[@3dprint-tech787]

Glad to see that you're back, I ain't having the fact you didn't upload for a while ;-)

[@OliverHirstsLife]

Welcome back, Andy! Great to see you back on the scene mate!

[@Barrybados]

Boost converter with some 18650s : ) .

[@FrozenHaxor]

Lithium battery and inverter is my bet.

[@MrMilarepa108]

YEEEEEEAH PHOTONICINDUCTION! You rock, dude!

[@JonWhitton]

Glad you are back blowing things up, we have all missed you! Even Colin Furze says so!

[@rajr110]

Giant high power RF emitter in the room ? Thats a lot of power dude

[@manuelminutello3027]

+Lucretius an RF transmitter witch can handle that power is a radio station so i don't think... :)

[@matsv201]

+Lucretius Intel built one that could transfer 100W for over a meter.. but it was quite a bit larger.. but.. well i would guess this is not it

[@viermidebutura]

+Lucretius i don't see a giant receiver coil so nop

[@Benjamin_S.]

Microwave power transmission? /s

[@S.ASmith]

+callum barbra depends on the microwave frequency. If it is ~2.4GHz then yes, interference maybe high. It would be classed as an ISM device as well, so anything it would interfere with would have to accept the interference. Wifi, mobile phone networks and things like baby monitors are not ISM devices. It is also fairly efficient with over 70% of the original energy being transferred from source to rectenna.

[@Doctorbasss]

awsome LIPO powered inverter!!

[@MarcKulhavy]

You are back! That REALLY made my day!

[@blargblarghonk]

I was just showing my friend this the other day and here you are with a new video! Awesome!

[@OnlyNotes]

It's powered by a hamster running on a wheel. Obviously people, smh

[@jonjohnson3372]

hi mate you gotta tell us how you did it please!!!!!

[@Photonicinduction]

+jon johnson Open it up very carefully soon :)

[@Blinkwing]

+Photonicinduction Which definitely means that you have charged supercapacitors in there. ;) Be careful dude.

[@WTGamingHD]

+Blinkwing doubt it, that much power, it says wireless so it must be some kind of coil inside, and a coil on the other side of the room

[@jonjohnson3372]

Cool be interesting to see

[@WTGamingHD]

+jon johnson me too :)

[@Alkaris]

I'm surprised to see you back and made a new video again, all good stuff!

[@KingTurkeySub]

Glad to see you back, Photon.

[@Squiffilect]

Chroma-Keyed out the extension lead?

[@tenwierdufos]

You don't need perfect lighting for an edit, live you would (hah, live) That just isn't his style though. Capacitor shenanigans I recon!

[@reeceevmez4208]

How ? There are no holes for the cable to go in to ?

[@Squiffilect]

May not seem like it but there was an element of jest when I said that.

[@tncorgi92]

My theory is that the leads are purely for show. The mixer has a battery inside and he's altered the motor to run off that. The bulbs can easily be reconfigured likewise to use batteries lika a magician's prop. The rating printed on that bulb doesn't mean he has not tampered with it.

[@tncorgi92]

You may notice that the only time you see the "filament" in the bulb glow is at the beginning, when he's standing close to the camera and you can't see the power cord. Then the video cuts and it's a DIFFERENT bulb after that, a super bright LED type that uses battery. He stands far enough away that you cant't tell there is no filament. Clever editing.

[@travis4798]

Both devices can run off dc, give them 36v (for 120 operation) or around 70v for 240 via a high voltage battery pack and bam, wireless power busted!

[@Photonicinduction]

+Travis Piper both were actually running on 260v

[@travis4798]

+Photonicinduction Oh? I'll have to see the next vid then. ;)

[@fiesta_vr]

+Photonicinduction can u do a vid how to make one I need one for the garage at be so Andy as I dnt have power out there

[@bardrick4220]

Um you are aware of Wi-Tricity: the brand name for wireless electricity? Also I've never seen Photon do anything sudo-scientific! This can be easily accomplished with a powerful tuned transmitter & receiver.

[@asskicker6557]

Welcome back sir,Missed your vids!!!!

[@grantmoorlag]

Glad you're back, photon.

[@Xenon777_]

I think its a joule thief circuit.

[@letsnotplaywithelectricity9346]

Agreed

[@GamerTheTurtle]

No he needs zero friction continous motion alternator in there! By no friction, I mean none! Even the friction of electrons is unacceptable!!!1!!! He needs thorium for that too

[@MrBeanbones]

This is real? looks like tesla wireless transmission, i think that was a mith.

[@donkyleone]

Myth

[@MrBeanbones]

+Kyle Dunstan yes myth, =p

[@manuelminutello3027]

+ArcanHage tesla's wireless energy was confirmed by MIT students in 2006 so again a scientist known as mad reconfirmed as genuous as my opinion (aologize my english i am italian)

[@Zylenxx]

HAAAAAAAAAX! nah idk maybe he hired magicans xD

[@Pip45]

+ArcanHage myths can turn into truths

[@thewiLik]

Great work, glad to see you back. Guessing you're playing with some good induction power kit... something I've wanted to try for a while ;)

[@switchcode]

You're back. This makes us happy.

[@princenw1]

put a bit of weight on

[@Photonicinduction]

+princenw1 lol yes I have, I gave up smoking over a year ago :)

[@princenw1]

+king of vape he said he quit smoking a year ago why are you trying to get him to vape?

[@123qwe321ify]

+princenw1 theses dam vape nation kids running around stealing our lungs

[@97SEMTEX]

+Photonicinduction you look healthier for it. you look in pretty good shape tbf.

[@paulsnroccchoppers591]

+king of vape whats a good vapor kit

[@sparkybluefox]

Andy! Good to see you back my friend! I'm looking forward to more awesome video's from your home lab ! SBF

[@jonwilson7078]

Great to see you again on KZbin, missed your vids!!. look forward for more stuff, keep it up kid ;-)

[@kisskissg60]

Keep the updates coming mate,best thing on youtube!👍

[@SayWhatNow92]

What a return, welcome back, missed ya

[@av6966]

I thank you for the upload you never cease to entertain ... please keep innovating Sir!

[@pikaonyoutube2139]

so glad u are back mate we all missed ya

[@shaundolphin]

Awsome to see you back, FINALLY !!!!! 7 Long agonising months is too long mate !!!!!

[@Twist3rOffical]

Thank you for coming back

[@spokehedz]

Welcome back, and looking good! Also, love a video that can stir up the comments section like this!

[@rfburns5601]

Good to see you back. I can't help but wonder about the long term health effects of being enveloped in such a high power magnetic field, but hey, you're a big boy! I noticed how you stepped backwards towards the source of the field each time you operated the higher powered loads. Cool!

[@jorgga]

Great to have you back

[@tvpredicta8756]

Great to have you back Andy, you have been missed.

[@NickssciencesuppliesUk]

Glad to see you back!!

[@winstondidit5843]

keep em coming dude! love your videos

[@gutsngorrrr]

It's great to see you back 😃

[@poptartmcjelly7054]

You're back !!!! i've been waiting for soo long, mate. Glad you're alive to be honest.

[@ehrenkrause9861]

the power cube would be good party toy. good to see you're back.

[@therealseb7536]

Nice to see you back!! Me and my mates have been waiting for your next video!! But this is making my head hurt evening thinking about it.... come on show us haha!

[@coombsfh]

So so so pleased you are back.