Wiring,Bully’s Brother , the Wicked RSX !

In this episode Shawn dives into the Fueltech ft600 wiring, He starts with a ft450 series 4cyl harness and depins and installs into the ft600 plugs. This episode is full of great tech tips and a good time with friends

[@AndersonDick]

Man, this is the best video I've seen explaining real life wiring step by step, thank you guys, so glad to have you enjoying the FuelTech!

[@Gunlover36]

Its awesome to see such a cool and innovative product come to fruition!!

[@davidsimpson9849]

Shaun is one cool dude man I could watch & listen to him all day love the whole Pfi team ❤

[@FishingWithVasquez]

They literally all have something unique about them!

[@escondidonative2903]

Yep. No jibber jabber. Dude gets straight to it.

[@nocoasthero1204]

I’ve been saying they need a camera on Shawn and Jaime all day every day. What a team!

[@KWC0]

Yea shawn always gots a huge smile on his face too... Always brings the good energy vibe!

[@tufgriz8917]

These are what i really like watching. Tips and tricks on the stand alone side and tuning tips

[@arcadiagreen150]

Shawn is the teacher I wish I had, but never got.

[@sideshow45]

We have him now. 😁

[@stevenmcc2119]

For real I learn though now and retain knowledge better watching then applying and rewatching

[@03treefitty]

Built wire harnesses and cables for almost 8 years in the medical field. Shit is fun to do i know that i just didnt enjoy my place of employment. But the skills i learned will keep for life thats why when you do a job even if you dont stay in it for life give it your all and learn the new skill to the best of your ability.

[@802Garage]

I'm so happy Shawn didn't start by saying "Everyone hates wiring." or "Wiring is such a pain." Or something like that. We need to teach everyone wiring is logical, procedural, and even fun. Nice demonstrations!

[@VintageTechRepairs]

I love Wiring ;)

[@DashnCars]

Exactly! Shouldn't be afraid to hop in and get to it. If it's done correctly, it's a lot of fun! Just need the right tools.

[@tetracontrol]

@@VintageTechRepairs You psychopath don't ever come close to my neighborhood

[@larry2978]

@@VintageTechRepairs ⁸9

[@larry2978]

@@VintageTechRepairs ⁸9

[@NGaHermit]

Shawn should do a weekly tech/fabrication tip video, always great in front of the camera

[@danchesterfield4709]

Please make more videos like this one!! I could watch these tips and tricks videos ALL day!! Love you guys, you are amazing! Thank you for being so cool and down to earth and for everything you do! So awesome, can't get enough! Thank you!

[@Csc6z]

One of the best channels on youtube!

[@wolfparty4234]

What’s better then PFI??

[@rileyjames9922]

They’re so unprofessional in “KZbinr” terms and I somewhat wish they were more BUT I absolutely love watching these style videos too. Especially when they’re doing h series shit. I love it

[@stevenplaskett7728]

Too bad his dyno is a piece of shit and none of his numbers are close to accurate. Seen 3 cars fall off from breaking straps

[@jeffandrews7335]

@@stevenplaskett7728 straps break all the time. As far as inaccurate, Brent has 2 dynos, and he put a single car, back to back, on both of them, and had the exact same numbers. Also, with Kyle’s hatch, and Odyssey, had almost the same numbers in Florida on Jeremy’s dyno. Stop the hate bro!

[@jeanperez6901]

Agree with ya

[@nojabjonny]

I have never been one for listening at school BUT the simple way ol shauno explains stuff makes me wanna listen ... Must be his carefree nature.. Good job Shauno!!!

[@tylerhall4399]

This is easily my favorite channel on KZbin! You guys are awesome

[@kushlaxin]

No cares what the internet could say. The passion and enthusiasm you guys have for this is unmatched in every direction. I appreciate these videos bro. Way deeper than just a car video or automotive youtuber's. You guys. All of you. Are inspiring guys. 👏🏆

[@DashnCars]

Mannn this consistency is awesome! Killer job all! This is the content we love seeing, PFI is on that moon tune!

[@cworden07]

That Goofy Built cover is legit!! Goofy gettin his name out there, can’t wait to see the kid rippin his own car soon

[@colinbissett5308]

Love Shawn's honesty, so nervous when you've done a big project weather it's wiring engine etc. That first fire up. But when you've done a good job it's a good buzz

[@tomthumb1322]

This channel is the "This Old House" for racecars. That's why it's my fav :)

[@DIYracing454]

Awesome job guys! I would recommend adding a relay to the vtec noid to be safe.As wired if the noid ever fails it will hurt the ecu driver. Just my 2 cents. Keep up the good work 💪.

[@MarkNorman_NXTLVL]

Love watching the productivity of the whole squad here - you all are true assets

[@davidblanck4131]

I love that the entirety of the class are helping each other with their builds. If you ever wanted to see why everyone calls the racing community a family..... This is it. The best of memories are built off this kind of support.

[@revredbeard3289]

Just got done rewatching Rocky Mountain Race Week 1 & 2 this weekend. I don’t think there’s a better antidepressant than binge watching a days worth of you, Cleetus and crue going on your adventures.

[@paulterhaar4862]

All the technical details, PFI Speed knows what petrolheads want to see! Way more interesting than watching rich kids and their new toys... 👍👍👍

[@Rafase]

I'm starting to think that KZbin has an algorithm to automatically include some "Dislikes" in every video and that those dislikes are not real....I mean, who would dislike a PFI Speed moment? Some of us wish were part of that team but here we are at the other end supporting our brothers who share their daily's with us. Thank you Brent for these PFI Speed moments. Blessings upon you brothers.

[@NitroUnion]

Heck yeah! Can't wait to see Wicked RSX and the Bully lined up!

[@harry4303]

Brent and the Boyz!!! By far my fav Channel on KZbin you guys are the bomb generally just seem like a down-to-earth cool guys. Keep on keeping on fellas

[@nbklife5952]

Most underrated channel road to 1 mill

[@JasonAJames]

Y'all got a hell of an outfit running down there. Can't wait till y'all can make it back to the dragstrip! Especially with these projects being so close to ready!

[@sketchy__chris]

Nothing better than PFI over a cup of coffee

[@terroristcam]

Phong and a beer 😎🍻

[@ronaldgraham5685]

As always, Sean kills it. Sean makes it sound so "easy".

[@SuperOMARKO]

Jeez Shawn gets all the easy work! Always killing it in the back ground, great to see a master at work.

[@castmaster84]

Shaun is one of the cleverest fabricators I have come across. Clever=intelligent

[@Friend_of_the_One-Eyed_Ladies]

Nice to see somebody who actually knows wiring, and what they're talking about. Guys who thoroughly understand electronics and electricity are few and far between.

[@MrChris106gti]

The content is gunna be nuts when everyones builds are finished

[@Nek167]

It's never finished 😅

[@llamacebu216]

@@Nek167 they have a life. Life first then fun later. It takes time & a lot of money when you're a normal person just trying to get by One little piece could be $200 or it could be multiple thousands

[@andrewferris8226]

One of my favorite videos to date. Really enjoy the technical information. Heck YA!

[@billypayne1030]

Brent is such a positive dude no matter what he's going thru. That's the type of friend you want, the true definition of he will give you the shirt off his his back type of guy. Has a great team too. I wish we see more of Sean's work and his Fab work. From the little vit that has been on video already you can can tell he is super talented. Brents consistent too with his content uploads almost ever day if not there's no more than three days in between his videos and keeps them all at least twenty mins. Lets make some jam! Been here since fifty thousand subs watching all the way from upstate NY.

[@axelleaxl.5315]

Very nice tutorial from Shawn ! PFI 'got talent ;-)

[@stevebeavers3754]

Shawn is both a fabrication and wiring guy. Really enjoying the nuts and bolts of the shop content.

[@wolfparty4234]

Shawn knows welding/fabrication and electrical wiring!!! What else does Shawn NOT know!!!❤️❤️❤️👍🏻👍🏻🤣

[@dmnsawshop8160]

Yeah buddy! Love watching you guys living your dream and spreading positivity and pure joy! It’s a special thing when you find your true calling and An awesome group of brothers to build and grow with!!

[@speeddemon2262]

Love the Shaun wiring content. Gonna be a sick car

[@tomkeppler1717]

Your shop and the guys are one of the best on KZbin right now. Good job

[@campingwithhomer7371]

I had no doubt it was going to work for Shawn the first time. His skill is totally obvious just watching him.

[@maxiumgolf1]

Fueltech and PFI. Awesome video Shawn, coming in hot with those ohm’s! It would be really cool to see a partnership 😉😉. That setup though! Looks great guys! Keep it up

[@slverbuet1791]

BRENT I ABSOLUTELY LOVE EVERYTHING YOU DO NO MATTER WHO IS BEHIND THE CAMERA NO MATTER WHOS DOING THE WORK ITS SO INSPIRATIONAL AN MAKES ME FEEL LIKE REAL FAMILY JUST LIKE WE ARE BROTHERS AND I HAVE BEEN DOING ALOT OF RESEARCH AND IM CURRENTLY RUNNING A VERY GOOD TUNING SOFTWARE BUT AFTER DOING MY RESEARCH AND WATCHING HOW EVERYTHING AT PFI IS GOING FUEL TECH I CAN HONESTLY SAY I HAVE EVERY INTENTION TO GET A FUEL TECH FT450 ASAP WELL SOON AS I CAN AFFORD IT AND I KNOW IT WILL ALLOW ME TO GET TO THE NEXT LEVEL ON MY BUILD SO I WANT TO PERSONALLY JUST TELL YOU THANK YOU FROM THE BOTTOM OF MY HEART AND I CAN'T WAIT TO FINALLY GET TO A POINT WHERE I CAN SAVE ENOUGH MONEY TO COME HANGOUT WITH YOU AN THE PFI/ BOOSTEDBOIZ FAMILY ONE DAY ITS A DREAM OF MINE AND ITS GOING TO BE EXTREMELY HARD TO GET MONEY SAVED UP TO ACTUALLY BE ABLE TO GET THERE BUT NO MATTER WHAT HAPPENS I WILL LITERALLY STOP AT NOTHING TO MAKE MY DREAM COME TRUE WEATHER YOU ARE IN FLORIDA OR COLORADO ITS FAR FROM ME IN NJ BUT IM GOING TO DO ANYTHING I CAN BECAUSE IT WILL BE A ONCE IN A LIFETIME EXPERIENCE THAT WILL CHANGE MY LIFE AN ALLOW ME TO MAKE MY OWN DREAMS COME TRUE...SORRY IM LONG WINDED BUT I HAVE TO TELL YOU WHAT YOU DO FOR MY LIFE MY FAMILY AND HOW INSPIRED I TRULY AM BY YOU THANK YOU BROTHER WITH NOTHING BUT LOVE AND RESPECT MAY YOU RECEIVE ALL THE BLESSINGS

[@pFbSpecV]

That fuel tech is sick!!! One day I will afford cool parts like that!

[@morganweast4228]

Welder, fabricator, wiring. Every shop needs a Shwan

[@theotherbrent]

I understand that moment of being anxious when powering up something after a complete rewire. Thinking over every connection 14 times but at some point you just gotta do it. Happy Happy when it is perfect. Sucks when it goes bad cause ya can't put the smoke back in once it burns.

[@k20edef1]

Make sure u check resistance in the spark plug wires after making. Big cause for misfires especially when u have to make ur own.

[@LordFarrquaad]

so simple but yet so complicated for the wiring, only at PFI do you learn this type of stuff with no censorship. But overall everyone at PFI is awesome, i genuinely love watching these videos

[@TCJerzy]

Shawn is the best man....Such a smart dude

[@anthonyestevez118]

So awesome! Keep up the great work. Thanks for sharing!

[@Ratwagonz]

I have a fully functional stock wiring harness and stock computer powering my stock engine in my car, but dang I want to upgrade to fuel tech anyway. Their stuff is awesome I love it!

[@michaelblacktree]

The GoofyBuilt logo on top is a nice touch. 👍

[@rwright_sk8031]

Shawn is awesome!!! Pfi has such great ppl with true passion!!!

[@acame]

You guys are killing it. Always look forward to your videos !!

[@jdmculture3224]

I have a built H2B I wish I could do some remote tuning to see what power Brent could make her have. 208whp 158tq currently

[@chrisgolding1259]

Everyone has their strengths at PFI. Great stuff Shawn!! The hardest part IMO. Wiring .

[@davids5080]

18:21 "please dont smoke, please dont smoke, please dont smoke." Lol this is me every damn time I rewire something... although occasionally there's a "please dont explode" thrown in haha

[@ZubairKhan-jd5op]

Last couple days weren't feeling right" I think i was getting withdrawal symptoms waiting for a new PFI video🙈😁🤘 top stuff as always" and always learning something new👌 wish fuel tech was cheaper and more commonly used here in south africa" I would have loved to run a fuel tech system on my ABF 2L 16V turbo golf mk1👍

[@SlothCharging]

Love these videos, brings so much joy to my day. Thanks for putting the effort in! Cheers

[@m7cruz]

Complete shop everything is done there I love it, good things is the all work together. 🏁🏎

[@hotwrenchauto9223]

So awesome to see these cars coming back!!

[@MrLarsgren]

if that little honda 2 wheeler in background is the old model without cdi then you can tune it with 2 zipties or some welding wire. it got self adjust ignition timing built into flywheel. you take it off rotate innerpart so the 2 wings move to other side. then you fixate them there with the wire or zipties.. this usually give atleast 50% more topspeed because it now pulls in last gear too. also a easy thing to remove if pulled over by cops to make it legal again. you cust cut and hand him the zipties and you get a weird look in return :)

[@marcuscooke4033]

This is one KZbin channel that needs a TV slot i could watch this for hour every day 😀 love pfi best youtube out Brent's a live legend

[@n01z3]

18:19 is a moment i live everyday in my field. burning electronics is best way to describe the smell of death. good job shawn.

[@andrewschuepfer6523]

You guys are rocking out! I can't wait to see everything running. #Talknerdytome

[@bryduhbikeguy]

Shaun;The magician of "fabrimagification"!

[@gunnargaming8584]

I love going In Depth with Shawn from PFI Speed. So much knowledge going into my brain I hope something sticks

[@Ricks408]

Could almost taste the jealousy when Brent sat in it and saw it all light up haha jk guys! Awesome job getting it all in and lookin as CLEAN as it does. Always amazing things happening at PFIspeed!

[@mauricedavis2905]

So much talent in one place 🙌

[@groschefbandit995]

Hi ! Good job guys ! But you forgot to put your lock on the deutz connector for te cam/crank sensor ! ;)

[@jamesjohnstone9378]

When Shawn put togather the 4 pin deutsch for the crank sensor and the cam sensor I did not see him put in the lock I saw it setting there after he plugged in the plug on the video important step for people who have not built deutsch plugs

[@MrBurndan]

Great Pin-out lesson!

[@Wildboi420]

Clean peel on that fuel tech 600.

[@rickscott6239]

Always learning something new on this channel and find it rather exciting even though I hate wiring. lol 😎👍💯

[@christopherkeegan2826]

I want to do this exactly for my street car... My question is - is there a starter wire and alternator plug ??

[@mcgirtICreality]

SIIIIIICK! LOVE THE PROGRESS YOU GUYS MAKE!

[@shanehaws3828]

I was just using the same crimper's to rewire some relays

[@chicagovasko]

You got Phong and Shaun working of the same car, its gonna be a good show. Thanks for posting #pfispeed

[@tonyross7376]

Sean is the man. Any update on the rehab s2k

[@thomasmeade4490]

Thats the one thing thats nice about the doen season you get to work on "wicked" projects not just jaming to keep things going

[@Danger-Dave]

Lol... Please no smoke...please no smoke.....Ha haaa!! Shawn didn't let the magic smoke out... I live that life every day & I feel ya bro. : )

[@jaksonpalmore3567]

Keep up the good work I would like to come get my car tuned soon

[@HunterAtheist]

"This is awesome." This should be the shop's motto.

[@Gunlover36]

The big half hour of power!!! Send that 4 banger to the moon!!

[@jsnider25]

You guys are crushin it nice work

[@nandor3596]

Shawn did a awesome job

[@imports145]

Loving the content the information you guys put out is awesome 👌 am learning a lot Thank you guys

[@willpierson5861]

Who’s neon is that with the white front end? That’s been in the background for a while now

[@PopVtecZ]

Congrats on 300k!!!

[@That1E_K1129]

You know what I wanna see??!!! IS A BULLY/WICKED RSX/PHEONIX 3-WAY FACE OFF!!!!!!! THAT WOULD BE ONE EPIC RACE DUDE 🤟🤙🤙🤙🤙

[@UnifiedRacingChannel]

So many cool things happening at once! Good work boys!

[@VinnieC262]

I had an 85' el camino ChooChoo custom edition and been a 8cyl. guy all my life but Brent, Jamie, Tom & Fong have some bad a$$ vehicle builds brother...🚗

[@codyallen9188]

What size pins are those and are they good for ecu re pinning?

[@bgdavid228]

being in the pc world.. peels from a new part is priceless

[@dominicbustamante1600]

Wicked Racing use to be a racing crew out of California Ron Bergenholtz is one of the members of that crew.

[@oldfart43311]

Nice job!!

[@danielfmyers]

That plug is some nice engineering

[@the-THORNSPAWN]

You need to be careful using resistance readings on coils and inductors as their impedance can change. With a simple switched solenoid it should be fine but with coils operated with pwm or frequency inputs the impedance will change with frequency and can drop quite low at resonant frequencies.

[@geedawgzzz]

That was a Co€k tease. Can’t wait for tomorrow. Hopefully they start it.

[@Motors84]

Love the content!!!!