WLTOYS 144001 FULL METAL UPGRADE | DISSASEMBLY | WLTOYS 144001 FULL TEARDOWN REVIEW | WHAT'S INSIDE

[@R-EVLMNKY]

Plastic arms and ball links are better, just buy spares…less weight, better fit and give some flexibility to prevent more severe damage😊

[@oicu81y]

Yes, this is an instructional video on how to build a paperweight...lol

[@fiercetatsu6782]

@@thehomefront1905 he’s right most of the metal parts won’t do you any good depending on what you’re doing with these buggies, only metal parts I really recommend and find are a need would be the front transmission box (maybe the rear too) and then the steering assembly and cups but leave the arms alone

[@takoza5396]

@@thehomefront1905 you don't know sht bro

[@thehomefront1905]

@@fiercetatsu6782 yes agree

[@TechyFertler]

Couldn't agree more, I have done the same with my 124017. Went all metal due to excitement then realised how much of a weight disadvantage was added. I also noticed too much play in metal turnbuckles and steering assembly. The extra weight adds much more stress to motor ESC and drive train and made the car under steer alot.

[@avarmauk]

Thanks for sharing. Concise and accurate with great camera angles of what you’re doing.

[@HMGCreative]

Glad it was helpful!

[@JabeArcade]

I bought one of these kits and put it together this exact way. Within 3 minutes of the first run post upgrade, two screws backed out and fell off in a grass field and the pull rods won't stay the correct length. Back to the original parts we go.

[@Coyote.five.0]

i did a full metal conversion of the 124007 1/12 scale and the upgraded parts fit super good in this newer version so dont be afraid to order go ahead the arms are thicker less gaps and now come with 2 extra needed bearings for the rear to have 3 in total for each side for clearance so overall perfect upgrade for me.

[@DailyDarsh]

Hi, I did the same thing but whenever I got my tires fit, it either looses and rolls off, or gets too tight and doesn’t rotate. I thought there was a washer or something.

[@Rek_Rc]

I went full metal on a wltoys and it was a mistake. Rods would just break from driving at high speed even without hitting anything. When a crash did happen, pretty much every single metal piece broke or bent. I put it all back to stock. It's better I think. Metal looks cooler but there is a place for it on an RC, and the entire car isn't the place for it. Swing arms? sure. gearing?...depends on the metal quality but sure. Chassis? Depends on what the car is for, racing yes, but for bashing metal probably is not the best. I actually prefer plastic Chassis generally.

[@jajbear10]

You should get carbon chasis

[@Rek_Rc]

@@jajbear10 that's an idea. Sounds good

[@DuskyLark]

@@jajbear10 so you'd get an unofficial part ? how ?

[@jajbear10]

@@DuskyLarksearch up 144001 carbon chassis

[@jajbear10]

@@DuskyLarksearch up 144001 carbon chassis

[@fettahcankan8973]

7:28 which grease did you used ?

[@TheAdimel]

I do this metal upgrade and its just worthed for me , the problem with them only if you play extreme like you hit anything in front of you, but if you play it well the metal gave more stability, if you can't control your rc dont hit full throttle

[@thai_spirit]

yes this is common problem with any faster RC car even profi grade

[@devidtheyfar686]

Las horquillas serán compatibles para un Tamiya TL-01 B ?

[@RomainGaultier-h5q]

Pour quel prix cette modification ?

[@hxshir_m3436]

does it come with tools or not. if it doesnt what size tools do u need thanks

[@HMGCreative]

you need 1.5 and 2.0 hex hand screw driver

[@jmac3693]

Will these parts fit on a helion animus 18mt? They look a lot alike. Helion went out of business and I can't find parts that I need. There are some but not much. I'm hoping someone on here will know.

[@rodolfovaliati]

What is the name of this key to remove the wheel ??

[@yunusdesai2429]

Great informative video. Have you bashed the all metal Wltoys in a skate park? How did it hold up?

[@naerarbern3932]

I commented below that have the same problem that Dennis with part 1525, the rear seat wheel. I watched the full video in the link you provide in your reply to Dennis and that part is not dissasembled there. My problem is that I broke it and had to replace it. That part is joined to the arm with a very tight metal bar that I do not know how to take out. I do not know what took can be used for that. If you could give me a clue I would appreciate it. Thanks a lot for the video.

[@naerarbern3932]

I would also appreciate if you can give me a hint of how to take out the bearings which are very tightly fit to part 1525 without damaging them. Thanks a lot.

[@naerarbern3932]

I would also appreciate if you can give me a hint of how to take out the bearings which are very tightly fit to part 1525 without damaging them. Thanks a lot.

[@naerarbern3932]

I fount it. The guy in the link below explains it in minute. 3:30. He is all "learning by doing", quite funny but usefull. Now I just have to find out how to take out the bearing. This is the link: kzbin.info/www/bejne/foDOfn1nlLJmd9E

[@tripyramidpictures9224]

Why did you keep the plastic drive shaft and gear?

[@stevelampard]

This is a very handy video as I just bought a 144010.

[@HMGCreative]

good luck and have fun

[@MsSheik-s4e]

Why would the pull bar rub the arms and construct the tires from fully turning!?

[@cho0322]

I did a full metal upgrade with a different but very similar set. On the front wheel assembly, I had a major issue with the screws that secure the steering arms. The steering arms extend inside of the body of the wheel, and the screws that keep them in place for the full metal upgrade have a large rounded head. Those screw heads rub against the inside of the wheel when you're driving. You can *almost* see the same issue in this video at around 12:03, behind the "B" of the Banggood logo. I ended up just reinstalling the ball that the plastic arms use and using some pliers to force the ball & the metal arm together. Not great. Did you run into this too?

[@HMGCreative]

I didn't have the same problem as yours, but you can try to fix it by grinding the head of the screw a bit, i think it should be fine.

[@conandude76]

@@HMGCreative was just going to suggest doing either that or sourcing a machined hex top screw of same size. Normally what, 10 bucks or less for a big kit of screws / ect for these things?

[@haajee1]

Than you mounted it upside down. The brass sleeve doesn't need on the same side as the screw head... made the same mistake...

[@rodolfovaliati]

Hi. I loved your video. Can you help me ? I've lost This rod that connects the engine to the wheel, making it spin. How do I buy a new one? What term do I use in the search? I also lost a clamp that holds the bodywork.

[@DuskyLark]

My bad, it's for the 10 version (brushless), but you can find the 01 on the website still, and most of the parts are the same

[@johnellefa]

Nice video I was literally wondering if these full metal kits are worth it. I think I'll just do the wheel hubs Also where did you get that tool mat. It looks really nice

[@ttpvlog2740]

Mình mua sao các mặt đạn không dính cố định dù đã đóng nó vẩn lõng le à bạn

[@HMGCreative]

Nó lỏng mà bạn, quan trọng nó ko chạy ra chạy vào là được.

[@DennisdeWeerd]

The only part i needed to know how to disassemble wasn't disassembled! I need to replace item 1252 as can be seen in the video at 5:16. That's the part most close to his finger in the top of the screen. Has anybody any idea how to remove this?

[@HMGCreative]

check this video kzbin.info/www/bejne/pqfKZapqeZ57eJY

[@naerarbern3932]

​@@HMGCreative I have the same problem that Dennis. I watched the full video in the link you provide and 1252 is not dissasembled there. Part 1252 is the rear wheel seat. My problem, and perhaps Dennis is that that pat is joined to the arms with a very tight metal bar that I do not know how to take out. I broke that part and need to repair it if you could give me a clue I would appreciate it. Thans a lot.

[@naerarbern3932]

I have the same problem. The guy in the link below explains it in minute. 3:30. He is all "learning by doing" and its quite funny but usefull. Now I just have to find out how to take out the bearing without dammaging it. This is the link: kzbin.info/www/bejne/foDOfn1nlLJmd9E

[@HMGCreative]

@@naerarbern3932 you can watch this video, more details on dissasembly kzbin.info/www/bejne/pqfKZapqeZ57eJY

[@andribakho]

can this part be installed on wl144010?

[@rohanbansal2324]

Yep same base.

[@Thomasbest2876]

DO the alloy upgrades make the car heavier?

[@tcjnr82]

Wish I could get mine back together as easy as that 😢

[@HMGCreative]

just follow my video and you can do it, another video show detail in dissasembly, check it.

[@robertpawlusiak]

Keep on looking at the video if I can do it with one hand paralyzed ! And not bull shitting ! had a stroke in 2013 You can do it also !!!!! I assembled this left handed !!!!!

[@Nagelsmann123]

I think just upgrade the Arm and Poll Rod parts to metal, for safety.

[@fugitive011]

OMFG I've been struggling with those C clamps for like over a hour. Didnt even think to take the other piece off first. LMAO thank you.

[@filipefpvrccar421]

Great upgrade Amazing buggy 😲👌👍

[@HMGCreative]

Thanks 👍

[@mpahriyadi6469]

Link order ?

[@loga_912]

You using it all stock right ? I didn't know this will be still this fast with metal parts. Nice!

[@HMGCreative]

yes, only upgrade metal part.

[@ricardorolhas7919]

Excellent video, excellent work! But putting lubricating paste on the reels?!? In plastic?! It will roll better, and make less noise, but it will create the effect of slipping, and the plastic will lose all its teeth!

[@Revdonlee74]

Hello. Does the 144001 and 124017 have the same gearbox? Thanks.

[@HMGCreative]

I dont own 124017 guy.

[@davidmellish3295]

Yes,I had a bad crash in my 124017 and I snapped part of the front gearbox housing straight of where it attached to the metal plate for the shock towers. Looking for a metal replacement ( I'm surprised he put the plastic ones back on ) they were selling on banggood and aliexpress and they all said they fitted 144001/124016/124017 /124019 etc etc I ordered it and it fits mine and they were advertised for this as well

[@KevinBooth8]

Sorry about your COVID lockdown bro 😢 keep your head high I hope the world improves! 🙏

[@jhorich1068]

Why you didn't use the new pinion gear and spur gear..

[@HMGCreative]

I mentioned in the video

[@kidsgamer915]

Brother from Pakistan the axle and universal joint are not available ,,i export from china but it is too much price.plz suggest me tips of home-made

[@HMGCreative]

It's not easy to made it yourself.

[@TheSphongleface]

No diff case / tower upgrade 🤔

[@raphiseth6942]

does anyone else have the problem that der Servosaver doesnt come off like that?

[@amilcarmoncada1801]

Excelente actualizacion realizada a este WLTOYS 144001, respetos desde Venezuela.💯👍🤜🔥🤛🙏💯💯👍👍👍

[@HMGCreative]

THANK YOU 😁😁😁😁

[@amilcarmoncada1801]

@@HMGCreative 💯👍

[@FreejackTS]

Thank you, helps a lot

[@VuaizakuMedia]

Is it me or does that dog bone look longer?

[@filipefpvrccar421]

I loved watching your video, everything organized Everything clean and well explained, count on my support 👍👌😉

[@HMGCreative]

Yes, thank guy

[@BuzzBuggiesRC]

I've got even more metal on mine I did suspension and wheels it's ace innit ❤

[@adamaulia8864]

Can this part for upgrade wltoys124016?

[@HMGCreative]

I dont own 124016, so I dont known.

[@Larrypint]

Which tools, glues and oil do I need to donitnlike you? Watching this is like meditation, as long as nothing is broken. Then it gets a little stressful 😁

[@HMGCreative]

I only need super glue and hex driver tools set (1.5mm 2.0mm 2.5mm)

[@cho0322]

He doesn't mention the grease he's using, but in case you're looking for a recommendation there too, I'm using Lucas Oil Red "N" Tacky Grease #2. It's widely available and from what I've read, it's very commonly used in the RC crowd. I got a 1 pound tub of it on Walmart. Way overkill for maintaining 1 car but there are other things it can be used for

[@rdn1273]

can i get this thing in amazon or ali?

[@HMGCreative]

ali or taobao, banggood ...

[@gabrielecohors6391]

Le sospensioni arrivano già con l' olio all'interno?

[@HMGCreative]

sì

[@sternygeorge2638]

Great vid

[@giangpham9204]

Bộ kit đó mua bn v bạn

[@HMGCreative]

8 trăm mấy chục nghìn đó bạn, thích con này mình bán luôn cho ^_^

[@giangpham9204]

@@HMGCreative bao nhiu bạn để coi hợp lý ko mình mua 😆

[@HMGCreative]

@@giangpham9204 1tr3, ship bạn chịu, part nhựa upgrade dư ra có đủ, xe y mới 😁😁

[@cesariumix5602]

Joli travail

[@karufx3792]

are u from vietnam ? i has see the plate of the black car is 47A,... Its from vietnam buon ma thuot and i am from that city too

[@HMGCreative]

Không phải Việt Nam bác êi, kaka

[@karufx3792]

@@HMGCreative Buôn ma thuột rõ ràng nha bác

[@HMGCreative]

@@karufx3792 bạn ở đường nào đấy.

[@karufx3792]

@@HMGCreative 137/12 Nguyễn Thái Bình

[@HMGCreative]

bác chơi xe gì ko

[@Isaac_Senpai]

Legend 🔥🔥

[@HMGCreative]

Welcome

[@takoza5396]

although cool .... it's not rly an upgrade it's actually making the car more fragile

[@DuskyLark]

how is that ? metal parts in strategic positions will prevent them from breaking ?

[@takoza5396]

​@@DuskyLark yea, same for plastic parts.

[@jameswisecarver]

You should run it for a month and a half and then try this also you didnt show how you got the glued screws loose ain't no way you undone them by hand.

[@xod7861]

Look great .. but the vehicle performance suffers

[@bunkh4458]

សួរស្តី

[@smarc1325]

my upgrade kit is ordered... juhu

[@HMGCreative]

Follow my instructions carefully, good luck.

[@rctopcar]

Top mano

[@rckomuniti]

Veri nice 👍😅

[@HMGCreative]

nice as always 😍

[@bxnxjff5968]

OwO hé lô rôm việt nam vết lốt ❤️😁

[@HMGCreative]

Are you Vietnamese? I'm from ú 😁😁

[@fredbienvenue7920]

nice

[@rctopcar]

Muito top

[@KhangNguyen-we6xy]

Bạn là người Việt Nam à

[@HMGCreative]

uhm bác

[@rohanahana2188]

Power full

[@HMGCreative]

Now it's a monster 🤣🤣🤣

[@nageshmancherla4517]

Super

[@HMGCreative]

THANK YOU

[@bunkh4458]

Hi

[@r_gamer8762]

عالی

[@HMGCreative]

با تشکر ، به کانال من خوش آمدید

[@r_gamer8762]

تو فارسی بلدی؟

[@HMGCreative]

نه من از مترجم گوگل استفاده می کنم 😁😁😁

[@r_gamer8762]

آها چه هستی داری علان داری با یه ایرانی حرف می زنی

[@HMGCreative]

@@r_gamer8762 I reply all comments in my channel, I'm Vietnamese. Welcome to my channel.

[@davidmartin499]

muy mal ni as cambiado la electronica ni el piñon de plastico

[@ImaYam]

😊

[@nageshmancherla4517]

👍😊

[@HMGCreative]

THANK YOU

[@minhthuannguyen3102]

Hởm ngày coi mà tưởng người nước ngoài

[@HMGCreative]

Người đi ngoài ra nước 🤣🤣🤣

[@bunkh4458]

Hi

[@bunkh4458]

Hi

[@bunkh4458]

Hi

[@bunkh4458]

Hi

[@bunkh4458]

Hi

[@bunkh4458]

Hi

[@bunkh4458]

Hi

[@bunkh4458]

Hi

[@bunkh4458]

Hi

[@bunkh4458]

Hi

[@HMGCreative]

hi