WLtoys 144001 Brushless Motor Upgrade Install

Upgrading my WLToys 144001 RC buggy to a brushless system.
Thank you so much for watching! Stay safe everyone!
I hope you enjoyed this video. If so, please hit LIKE, and please subscribe to my channel and hit the notification bell so that you will not miss out on my upcoming videos.
Components installed:
GOOLRC 3650 4 POLE 4300KV Brushless motor
DumboRC X6A Transmitter with X6FG Receiver
JXSERVO Digital Servo Metal Steering Gear PDI-1181MG 17G 3.5Kg
120A ESC 2.1 (Hobbywing Xerun replica)
===========
Affiliate Links
===========
WLTOYS 104001 (NEW)
===================
Banggood: www.banggood.c...
10% Discount code: BG10OFFAFF
Makerfire: shop.makerfire...
7% Discount code: MickoRC
WLTOYS 124018
=============
Banggood: www.banggood.c... 10%
Discount code: BG10OFFAFF
Makerfire: shop.makerfire...
7% Discount code: MickoRC
WLTOYS 124019
=============
Banggood: www.banggood.c...
10% Discount code: BG10OFFAFF
Makerfire: shop.makerfire...
7% Discount code: MickoRC
WLTOYS 144001
=============
Banggood: www.banggood.c...
10% Discount code: BG10OFFAFF
Makerfire: shop.makerfire...
7% Discount code: MickoRC
Hobbywing EZRUN MAX10 60A ESC from Hobby King: hobbyking.com/...
JX Digital Servo 17g Metal Gear PDI-1181MG: hwww.banggood.c...
10% Discount code: BG10OFFAFF
XF POWER 2600mAh battery from Banggood: www.banggood.c...
10% Discount code: BG10OFFAFF
DumboRC Transmitter and 6CH Receiver w/ gyro from Banggood: www.banggood.c...
10% Discount code: BG10OFFAFF
SKYRC GSM-015 GNSS GPS Speed Meter from Banggood: www.banggood.c...
10% Discount code: BG10OFFAFF
120A 1/10 1/8 6v ESC Sensorless Brushless from Banggood: www.banggood.c...
10% Discount code: BG10OFFAFF
FS Racing Wheels 1/10 from Banggood: www.banggood.c...
10% Discount code: BG10OFFAFF
GoolRC S3650 Brushless Motor from eBay Australia.
Music: www.bensound.com
#wltoys #rccars #mickorc

[@RollyMagpayo]

This is one of the hobbies that I never got into because I knew I’d go broke. I used to do airbrush art for some of my friend’s RCs.

[@Funcentric]

Prices for RC's have really come down these days. This one is under $100 stock. Not a lot of runtime from the stock battery and setup. If you're looking for an all around good one that doesn't need much modification, you may want to look at the HBX 16889. I find the 1/16 is a the perfect size, run time is excellent and it's $77-85 USD ready to run. No clear bodies from what I've seen for you to airbrush unfortunately, but maybe you can find something.

[@2themaxrc71]

Thanks for the lessons. I’m new to rc, I’m starting a club for the youth in my community and your videos are very helpful.❤

[@Funcentric]

Solid setup. Thanks for putting this together.

[@MickoRC]

You're welcome. thanks very much for watching. I've been meaning to make my own ramp after watching your DIY ramp video ;)

[@JugecYz85]

@@MickoRCcan i use that esc on my wl toys 144010 you said its for 1/10 1/8 but u use it in 1/14car so will it fit?

[@mehimrc1314]

Really nice build, that gyro had you confused but got there in the end haha. Keep it coming dude 1k subs blown away congratulations

[@MickoRC]

Yeah, got it in the end. That was back when I was a new noob. Now I'm just a seasoned noob. Lol. Thanks for watching. I like your tips regarding X6F. DumboRC radios are full of Easter eggs

[@blgaming6717]

@@MickoRC can you turn off the gyro

[@joshherrman3201]

So in the gyro the button on the receiver hit it 3 times it make it work. If it's going rhe wrong way hit it 2 more times. Its the same receiver as the radio link. I've had to learn all this stuff on my own in a short time. Nice job on the build.

[@joshherrman3201]

@@MickoRC wltoys are what I learned on. I just built a 144001 and used lc racing parts on it sway bars shock springs. They are fun cars.

[@PtsdRC]

How did you get it to work? I couldn't get it to for crap

[@roadstar499]

i just ordered this setup...i plan on just running 2s stock battery and hopefully getting 40 mph top speed using stock gearing.. thanks for sharing

[@_Za_Unknown]

Just use one 2s lipo or a 3s but that might make you crash cause 3s is too much for this car

[@ukaszrugaa104]

How much it costs for U?

[@B.D.B.]

You probably could have cut slots in the pad so you wouldn't have to remove the reinforcing ribs. I do have to say you removed them so cleanly it looks original, I'm genuinely impressed.

[@MickoRC]

oh yeah, haha! shoulda, coulda, woulda 😄

[@B.D.B.]

@@MickoRC After posting that comment I saw all your speed run attempts. Not to spoil the ending, but it really doesn't matter.

[@billy3650]

Good luck. You'll get better handling with the gyro receiver. Good luck on that esc, I went through 3 of them catching on fire with only 2s.

[@MickoRC]

Thanks for watcching. Yeah, it's the X6FG receiver which has gyro built in. ESC lasted 6 months. I expected a few days. LOL. Reached 90km/h on 2s. I stacked it on 3s.. I'm hopeless at speed runs! BTW.. have you seen my giveaway video? In case you're interested, submit your entry for a chance to win a WLTOYS car, your choice of a 144001 124018 124019. cheers

[@billy3650]

@@MickoRC Sounds interesting, how to enter ?

[@MickoRC]

Sorry Billy. The competition ended a month ago and a winner was drawn. Stay tuned for our next giveaway hopefully in the near future.

[@billy3650]

@@MickoRC ok no problem, I'll keep an eye out, thank you

[@camrowdrone6497]

Been blasting mine on brushless and on the plastic spur takes it, also have a metal for back up, your giro antenna is sticking out from the side move it so facing the rear then you won’t have any problems 👍🏻

[@qw0wp2]

You mentioned you were new to the hobby..... I thought okay I'll give this video a like THEN you bring out the blowtorch! Well, naturally I had to sub

[@MickoRC]

LOL 🤣😂 ah man too funny! cheers bro! 👍

[@RobertGercia]

Cool video. Keep us inspired!

[@MickoRC]

Hello Hazwan. Thank you so much for your kind words. Very much appreciated. 😀

[@juniordadsrc9607]

That's a awesome upgrade mate

[@MickoRC]

Thanks very much. It was quite fun to do. Thanks for watching!

[@MicroTonTech]

nice..thanks for sharing! i really love RC cars! stays safe and connected. new friend here. god bless!

[@MickoRC]

Thanks for watching! cheers

[@idjc2621]

I got a similar setup exactly KV, 60amp esc same transmitter and receiver though at time I didn’t know rebranded flies absolutely flies crazy to attempt full throttle, on 2s Lipo 45c

[@MickoRC]

Hi ID JC, Yeah definitely need a decent stretch of open road to be able to hit full throttle, even more so on 3s. Thanks for stopping by, and have a nice day!

[@adamdavis5961]

Oh yea! Lots of road for sure.ad I get older, I would like to do these runs fpv, drivers view, and I believe I could get some mighty runs. I really do like the Dumbo tx/rx. Look close, not every one has Gyro. And, yes, it's in the receiver, not the Transmitter, so all the Dumbo's do gyro, just get the rx! You think 4300kv is fast... I dropped in a 3250kv I had lying around... WOW! Had to double check I didn't set the pavement on fire! So much power from these things, I believe we can do great speed runs with the 2XXX size motors. I've got a 2968 2200kv on wishlist now to try. a.aliexpress.com/_mKS7wX5 I figure 6s on the 2200kv will hit sweet spot rpms. Build the buggy right, think I might be breaking 100mph....

[@sethh.3518]

Thanks for the video bro. I think im going to buy one 144001. Im a nitro guy and dont own any E (electric) words! Now i do want one of these though.

[@jeromeurbain1978]

Thanx a lot for your vid mate. It is really helpful. Ordered all my parts : ) Take care down under

[@MickoRC]

Thank you so much for watching and stopping by. All the best with your build. It will be a lot of fun! Have a nice day. 🙂

[@Rhoedision]

well done..and awesome setup..very nice..

[@MickoRC]

Thank you! Cheers!

[@rcflashcars]

happy to see 10 k views but sad about not reaching the 1 k subs...

[@MickoRC]

Maybe one day! 😊 Thanks very much for stopping by. Have a nice day

[@yanivnahum1756]

Hello @Michael Vergara really nice setup , I wanted to ask can I replace just motor ? leave all the other parts with the stock one ?

[@MickoRC]

Hello Yaniv Nahum, Thanks for watching and commenting. Yes, you certainly can replace only the motor, as long as the replacement is a *BRUSHED* motor, not brushless. Let me know if you have any other questions. Have a nice day!

[@sgm5509]

Creo que mi motor dejó de funcionar. Es posible cambiar solo el motor y que todo siga funcionando correctamente?. Thanks

[@rc-diy7864]

Wow good video 🤩

[@dayzps4143]

Thanks 👍

[@WestDesertRc]

Where u get the programming settings

[@nathankanter7967]

Funny that your controller order messed up, my 144001 order had the same issue.

[@MickoRC]

hehe. did they end up giving you an X6A instead too? 😀

[@eriktower1648]

Good work

[@MickoRC]

Thank you so much 😀

[@MickoRC]

...and thanks for watching, Erik! 😊😊

[@tugrasarchive]

Great Video!

[@MickoRC]

Thanks for the visit. Have a nice day!

[@tugrasarchive]

@@MickoRC you Too !

[@faisalrahmat9114]

is that motor fit perfectly on original motor mount? and is that new servo can fit too? without any modification

[@niccomaniatty9421]

Were you able to fit the shell on ok with that esc with the fan?

[@MickoRC]

yes bro. it's a pretty small ESC. Though it ended up frying after 6 months. cheers for watching! 👍😎

[@niccomaniatty9421]

@@MickoRC oh 6 months?! Hmm ok thanks for the info.

[@RCDRIVERSTUDIO]

Graet video :)

[@ismailajtira8632]

Como se llama receptor estabilidad ? ? Gracias

[@arek-nx8sr]

Hi, did you Have a problem with this brushless upgrade? I did everything ok, but when i put some throttle It has a lot of lag and after two seconds goes really fast. When i Give a little throttle it moves everything a little bit like Vibrating.

[@adrianoyuremanu5148]

Vc ja utilizar bateria 3s

[@붉은호랑이-t3s]

where is the lipo alarm?

[@MickoRC]

Don't have one. Relying on the ESC's LVC which is set at 3.4V. Thanks for watching, and for your support. By the way... have you seen my giveaway video? kzbin.info/www/bejne/kImmnZ6Zd5x8bKM Submit an entry for a chance to win your choice of 144001 or 124018 or 124019, in case you're interested. thanks

[@붉은호랑이-t3s]

@@MickoRC The RTR ESC that I am using does not have such a function, so I should use the lipo alarm.

[@붉은호랑이-t3s]

@@MickoRC I don't know English very well, so I don't know what it means even if I watch the video about the link.

[@eriktower1648]

Please, Where do you buy front bump? It Is very nice...

[@MickoRC]

Hi Erik, The bumper was taken from a very old el cheapo RC crawler. It isn't really a good one. 😀

[@blgaming6717]

can you turn the gyro off and on

[@MickoRC]

Hi mate. Yes by pressing the program button on the receiver. Or you can leave it on and then control the gyro sensitivity by adjusting the CH6 dial on the transmitter -- putting the dial at 0 effectively turns off the gyro.

[@roadstar499]

so did this 120 amp come with programing instructions? i do have an old hobbywing programing card from 12 years ago...i used it from my boats and planes...i wonder if it will work on this esc??? thanks...

[@MickoRC]

No programming instructions were included. But you can check out my video where I program it if you want. kzbin.info/www/bejne/fJ-coZyCbcdmrdU

[@MickoRC]

The manual I use in my programming video is for a hobbywing xerun 120a ESC and it worked on this blue ESC

[@roadstar499]

@@MickoRC it must be a clone.. thanks

[@mojezabawki4628]

I already know what will be next. So far we have Wltoys 12428, moreover, we show it on our channel.

[@Petrolheadz1]

What is the gyro functionality?

[@MickoRC]

Basically it self-corrects oversteer.

[@Daniel-fe3iv]

Do you need a new transmitter for a new brushless motor?

[@MickoRC]

Yes. Because the stock radio receiver is combined in the stock brushed ESC.

[@krisennadasen9558]

Thanks for sharing

[@MickoRC]

Thanks for watching!

[@klumreilly-lawrence3781]

can i put an 5000kv motor

[@jaapdewaard830]

Light shoud be purple for gyro to work 3x press button

[@MickoRC]

Jaap De Waard thanks for the tip! I eventually worked it out in the end, so all good. Thanks for stopping by. Have a nice day!

[@siutinchen986]

why this esc looks so small . what brand it is

[@MickoRC]

Just is mate. No-name brand

[@sjoer]

Isnt the gyro supposed to be active with throttle up?

[@MickoRC]

It's active whenever the car is in any motion (e.g. by throttle, by momentum, by any force in any direction)

[@Andym1159]

Good video 😎, what size metal spur gear do I need pls? I’m new aswell and on my 4th build doing a 144001 brushless conversion with exactly the same motor and then screws need some heat eh....thanks for sharing an excellent build 🙏👍

[@MickoRC]

Thanks very much for your kind words! The metal spur is same as the stock size but I don't know the specifics. It's the exact same one at www.banggood.com/custlink/3GDRIqUYzJ. I hope this help!

[@Andym1159]

@@MickoRC thankyou for the link I’m just waiting for a little butane blowtorch to get the screws n mount off I want to use the original as it was made for the car. It’s mad though, the bugger unscrews on my old 144001 and I’ve just bought a brand new 144001 to do a good build?🤞🏼And I’ve never seen so much lock-tight on the new one!! 🤣🙈 Eh and the diffs were greased but not enough 🤷‍♂️ no way? Still a job to do b4 you even turn the engine!! Great vid cheers 👍😎

[@MickoRC]

@@Andym1159 If you have a good soldering iron that gets hot enough you can use that to heat up the scree to melt the loctite. I've seen others do it that way. All the best with your build! 👍

[@jedsadakornpluemjai916]

I want to get together Wltoys 144001 Where can I buy?

[@MickoRC]

Hi mate.. Check the links in the description where to buy this car. Thanks for watching bro!

[@Petrolheadz1]

Did you need to buy the programming card also?

[@MickoRC]

No, because this ESC has a program button for manual programming. Some ESCs have a program button while other don't. Cheers for watching bro!

[@anjel5267]

@@MickoRC

[@anjel5267]

so if i change brush to Brussels i have to get a new remote i am new on this 😅

[@MickoRC]

@@anjel5267 yes.. u need to replace the radio (remote control transmitter and receiver) because the stock radio receiver is built-in the stock brushed ESC.

[@anjel5267]

@@MickoRC thanks so much im going to try to make a Wltoys 12423 brushless

[@teambeans23]

hi great video,its very helpful, can you tell me what battery you are using please

[@MickoRC]

Hi lance young, thanks for watching mate. Battery is XF POWER 2600mAh 60C 2S LiPo. got it from banggood 6 months ago

[@dauntlessfpv]

Where did you get the metal spur?

[@MickoRC]

Dauntless H I got it from wltoysrc.com as they were the only one's selling it at the time, but there may be other places selling it now like banggood.com or aliexpress.com. thanks for watching! have a nice day

[@rchobbiesuk9492]

hi great video I want to make mine brushless do u have a link to any motors which would go well in this?? thanks for the video 👍👍

[@MickoRC]

Hi mate. Thanks alot. Links to the components are in the description except for the motor. I've used a 4300kV 3650 size brushless motor from ebay but the item isn't listed anymore. Note that the components I used are mainly for speed not for bashing. Good luck bro!

[@erikarnawan3308]

Where did you find the front bumper?

[@MickoRC]

ohh.. it came off an old cheapo rc car and has since broken off. Was too brittle and shattered. Hey thanks for stopping by and watching! Much appreciated ☺️👍

[@erikarnawan3308]

@@MickoRC love your mods!!!

[@jtsn667]

This the eBay kit?

[@MickoRC]

no, parts were putchased separately mostly from banggood. Motor was from ebay

[@dylanhooks1700]

Awsome

[@MickoRC]

Thanks bro! 😄😎👍 Are you doing a 144001 build too?

[@justinturner4067]

Just a quick question....do you need to upgrade the transmitter, if you upgrade the motor and go for a brushless 1 ? Cheers 👍🏻✌🏻

[@MickoRC]

Yes bro. Need to replace the stock receiver and hence the transmitter as well. Also the servo because the stock one has 5 wires whereas the new receiver will have a 3 wire socket

[@justinturner4067]

@@MickoRC ok nice 1 cheers..... what transmitter do you recommend ? 👍🏻

[@MickoRC]

@@justinturner4067 I love DumboRC radios. They're relatively cheap and function very great.

[@justinturner4067]

@@MickoRC Ok just bought 1 😬 Thanks again, appreciate it 👍🏻✌🏻

[@stekeel6993]

How did you solder the esc to the motor

[@MickoRC]

Hi there Ste Keel, I soldered 4mm banana plug ends to the ESC wires. Then just plugs straight to wires from the motor. I hope this helps. Have a nice day.

[@deaf.dumb.blinded]

Most importantly which front bumper is that does it fit directly or are mods required? Also I love the lights.. links?

[@MickoRC]

Hi rmalik84s3, thanks for watching. I ripped the front bumper off a cheapo 1/18 crawler. I screwed it in with longer screws into the existing screw holes that secure the original bumper. You can grab the lights from ebay, banggood, wish, aliexpress, etc. they're all pretty much the same. www.aliexpress.com/item/32972912975.html www.wish.com/product/5c26efd52e4f5b11f0a2cdab

[@tugrasarchive]

can i use the servo for any receiver?

[@MickoRC]

Yes as long as the receiver supports 3-pin plug for the channel, which all common receivers do

[@tugrasarchive]

@@MickoRC nice, i need one for my 124019 brushless upgrade. I offered one but it was too big, so it didnt fit in there. Can you say me one thats small and fits and is a waterproof one? Would be amazing! :)

[@314Ryno]

Hey my guy I was wondering if you can help me out, I keep ordering batteries that's to big, could give me the specs on the biggest size battery for these buggies, I would appreciate it 🏎️

[@MickoRC]

Hi bro. I measured the battery bay L x W x H as 102 x 38 x 22mm.

[@jamesfletcher9722]

What size Hex did you use?

[@MickoRC]

hi James. For the pinion grub screw I used a 1/16th inch allen key. Thanks for dropping by. Don't forget to sub! 👍

[@HippoDrones]

Nice build, what is the gyro for exactly? (I'm a noob too)

[@MickoRC]

Thanks Hippo-Drones. The gyro in RC cars is a sensor which adjusts the steering to provide you with a more stable and controlled driving experience by managing steering (counter-steering) output automatically to keep the car's tires aligned in the direction you choose. thanks for watching!

[@HippoDrones]

@@MickoRC ooo that sounds pretty gucci

[@jtsn667]

How'd the esc hold up?

[@MickoRC]

Held up for 6 months. Got a HW ezrun max 10 in it now

[@MudMonsterRacing4]

How fast did it go? I'd like to do this to mine eventually . My rear diff broke straight out of the box on the stock 2s :( What 3s battery and charger are you using?

[@everythingispose-able2543]

@@MickoRC So that means the upgrade does little for 2S, as I got about 51 KM/hr fully stock. However, now you can do 3S without worrying about frying anything. That should get you at about 65 km/r range.

[@MickoRC]

@TJMill3r I tried measuring the speed on 2s (in one of my other videos) using GPS app on a phone, but I don't think it was accurate at all. I'm still waiting for a proper gps speed reader to arrive. 2s lipo is an XF POWER 2600mAh 60C. I have a 3s ZOP power 1500mAh 30C but haven't done any testing with it yet. waiting for the speed reader to arrive! thanks for watching!

[@MickoRC]

@@everythingispose-able2543 i guess it depends on the specs of the motor you upgrade to. there's many out there with higher RPMs but with less torque. I hope to receive my speed reader soon so I can test properly on 2S as well as do 3S test. thanks!

[@MudMonsterRacing4]

@@MickoRC I have 1500mah 120c batteries now and its insane.

[@عمرمحمد-ذ1ت6ظ]

What is the name of the servo

[@MickoRC]

Hi عمر محمد, thanks for watching! JXSERVO Digital Servo Metal Steering Gear PDI-1181MG 17G 3.5Kg

[@gabehills2489]

Is the 120a ESC overkill for this car even with the upgrade?

[@MickoRC]

Yes, probably. But it was the cheapest ESC I could find. thanks for watching and have a good day

[@gabehills2489]

@@MickoRC OK. Thanks for sharing the video. I just got my buggy and will switch to brushless when I wear out the current setup.

[@adamdavis5961]

NOOOOO! I have a few of these for projects, and they do work. As long as you don't actually treat them as they're rated. Got some as burnt & melted parts too.. Just keep an eye on them. But I've run 3650 3200kv and 4300kv on this buggy with 3s, but I don't run 3s back to back, and let them cool off between runs. I will NOT. Be running them on my HSR 144001. Then again.... I'm getting a 3674 2260kv to run on 1:1 mod 1 gears! I recommend to get them as far under $20 as you can, they are"disposable" the same way tires are, worn out, burnt out, reaplaced. No hard feelings...

[@MickoRC]

Hi @@adamdavis5961 I will keep an eye on it. I would like to replace it though. Can you recommend a better cheap ESC? Thanks for the advice. It is much appreciated. Have a good day.

[@adamdavis5961]

That's my big battle right now too. I'm looking at the HOBBYWING WP- Max8-RTR 150A right now. "Cheep" for a speedrun car. Ha Ha. And boat or 2 way flight esc's for my basher. I will be able to use the left, or v battery" side in my HSR, as I will be using saddlebag batteries on it. But with limited space for a clean build for regular use, I am going to try out some bargin 2 way esc's from Ali Express. I had gotten a while back for just that reason. Cheep, small, and should be fairly tough. It's been awhile since I got em, and I kinda forgot I did! I. Got a 30a, amd a 40a "ZMA Bidirectional esc". It was an experiment that didn't really take off. Ha Ha.. I crack myself up... I just did a search, "bidirectional ESC Flight" sorted by price, and run down till I got what I guessed would work. EBay, Banggood, Ali Express... I thought it would be nice to have multi cell support, small durable, and hopefully reliable esc's. I figured flight has to be pretty darn tough. And the 30a does 2-4, and the 40a does 2-6s. Forward, reverse, and who knows about brakes... Deal with it.. Ya know... I'm looking in to some vids on KZbin about it now. Seems promising. Yea, just did an Ali search, doesn't sort well.. Have to pick through em... Forgot what I paid, really cheep comparatively. $8 for the 40a and $6 for the 30a. Just found em. 1PCS 12A 20A 30A 40A 50A 60A 80A ZMR Bidirectional Brushless ESC for Remote Control Ship Pneumatic Underwater Propelle a.aliexpress.com/_mPEB2Ax I can't verify yet, haven't tried em, so.. Searching vids... But I think it's a promising route.

[@juanrengel9709]

the kit brushles is for 1/10??? o for 1/14??

[@johnmcook1]

We call them set screws

[@jacksampson7711]

So I have an old stock 144001 that seems to have died. Radio is not transmitting and the motor doesn't turn. Would love to do this but it doesn't seem worth. Might as well just buy a different model.

[@ArrowLooper]

You can get a brushless kit with a motor servo and new controller for 60

[@stevenpowers9761]

Pisses me off, new to the hobby and plastering adds!

[@MickoRC]

The ads help me produce more videos with intention to help and/or entertain viewers/RC enthusiasts. An option for you may be to get a KZbin Premium subscription if the ads bother you so much. Have a nice day!

[@guidelineuk]

Pillion gear remover eBay 4 Bucks..😎

[@guidelineuk]

114008585779 item no: ebay 😎

[@MickoRC]

Thanks. But I had no problems removing the pinion gear from the shaft. Problem was with the grub screw in the pinion which appeared to have been secured with super-glue (as opposed to threadlocker).

[@guidelineuk]

@@MickoRC I take it all back I tried to remove the screws I think you're right about the super glue... new parts on the Way Lol

[@JKTV101]

your meant to tilt 😶far out

[@kylesteele7590]

Too many ummms

[@chalietaylor2554]

I can’t get my controller to link to the server right the controller came with my brushless motor I’ve been trying for months to figure it out. My trigger steers it an u have 3 plugins on urs mine only came with two has anyone else had this problem

[@MickoRC]

Are you sure you've plugged the ESC into port 2 of your receiver and the servo into port 1 of your receiver?

[@chalietaylor2554]

@@MickoRC yes it never came with instructions that explains how to sink the controller properly I’m away from home until Saturday due to work I would be grateful. If ya could keep in touch until I get home than I can send ya video of it but I’m still all ears as well. Explore every option their could be on how to fix it

[@boi9532]

What size do you use to open the grub screw