WLToys 284131 (V2) RC Review VS K969 VS K989

[@kuikmix]

📹Related Video: ►Convert 284131 / K989 to RWD in 5 Minutes: kzbin.info/www/bejne/gJ7WdKuJnKp9pLc ►How to Install a $9 Gyro on WL Toys 1/28: kzbin.info/www/bejne/b2iwo6GAeK6eqsU ►Servo Upgrade for K989: kzbin.info/www/bejne/jmnPpaCZZ7l-e6c

[@brianoliveira698]

10:36 Great video. I heard those mode buttons were for a 4 wheel steer crawler wltoys 1/24. Adjustable crap 4 wheel steer. I used thermal paste to add a heat sink as well. Really helped.

[@kuikmix]

Thanks for the info!

[@TheBod76]

The excessive heat of the motor is solely caused by the sticky gears/differentials! That's why you should really disassemble them and clean them up. I am talking specifically about the 284131 since I don't own the other tweo versions.

[@kuikmix]

I know, I already mention about this in the video :)

[@DxeNvtsukii]

wltoys, and mini z's are the future of mini rc's at the moment. For those wanting a lil bit bigger u can go with LDRC and Haiboxing those r great.

[@sheesh2231]

I have LDRC and the swing arm always pops off☠️ kevin Talbot has same problem (if you know him)

[@Yimaj]

Just got mine this morning. it has brake light mode and also turn signals when turning... also came with heatsink on motor. extreme fun with 3 to 4 friends on a carpet track

[@kuikmix]

Wow, that's cool. Thanks for the info

[@xtyano440]

thank you sir!! very informative!

[@kuikmix]

Glad it was helpful!

[@beardedxj]

Thanka for the awesome video. I just received mine today. I already got a few hop-ups ready to install. Metal nuckles, servo horn, drift wheels, and metal ball differentials. Want to set up for drifting (or power sliding 😅)

[@kuikmix]

Have fun bro!

[@RumblePirate]

Nice information mate , thanks 👍🏼

[@kuikmix]

Happy to help

[@comrade2620]

I just bought one! interesting alteration for 2wd and drift

[@kuikmix]

Yup, we can do many things with this micro RC

[@edisonchow4107]

This is a good video! I can feel you put a lot of effort in it. And I bought a 284010 which is similar with the 284131.

[@kuikmix]

Cool, thanks!

[@rhedendeleon]

Thanks for the info. Already bought mine ❤

[@kuikmix]

Have fun!

[@mashedpotatoes5323]

I just got one of these recently and the gears were definitely very sticky. I took it apart to apply grease and clean anything up but I noticed that the differential pinion gears were metal and for the most part there wasn't anything to sand besides a few suspension pieces. After putting it back together and breaking it the gearing by running it in my hand and then taking it back apart again and repeating the process I have it running very smoothly now. I bought this under the assumption that it had plastic differential pinion gears and have saw online that they have a tendency to strip out so hopefully it is pretty much indestructible now with the metal ones.

[@kuikmix]

Thank's for the update!

[@azkanand5832]

what do you mean by breaking it by running on your hand?

[@mashedpotatoes5323]

@@azkanand5832 breaking in/ letting the parts wear in. I held the car in my hand and kept modulating the speed while feeling if the motor would get too hot. If you were to run one of these out of the box the motor gets extremely hot because of the load from the sticky drivetrain. I think the best way to break one of these RC cars in is to first just completely rebuild it and add plastic safe lithium grease and then let it run in your hand for a couple battery charges.

[@azkanand5832]

@@mashedpotatoes5323 yesss, the motor is very veryyy hot. This is my first RC, i thought this is normal 😄 ok so i just need to rebuild drivetrain, apply grease, breaking in, and repeat?

[@mashedpotatoes5323]

@@azkanand5832 yeah that's what worked for me, I have 3 different models and they all run very nicely now.

[@cheese-burger-enjoyer]

Amazing video keep up the good work and also I have a question, do they all have same speed?

[@kuikmix]

more or less they have same speed (it also written on their box).

[@greenones8754]

The mystery number switch is for if you have 3 more receivers install them in 3 more RCs and thsy button will switch the chamnel or receiver you wanna control mate,!✌️

[@kuikmix]

Wow. Thanks mate! But I think I prefer to change the TX / Transmitter than buying anothe WLToys Receiver 😅

[@timb-f9u]

It's a great car ! Love mine .!

[@kuikmix]

And it's fun to modify too!

[@OppositePengui]

the purpose of the modes button is for the rc's that have a capability to crab and have a controlled differential

[@kuikmix]

Thanks for the info. May I know which WL Toys car (that use same transmitter as 284131) that have a capability to crab and have a controlled differential?

[@OppositePengui]

@@kuikmix I believe the wltoys 24438b has that function, it is quite difficult to get anywhere but aliexpress now.

[@flat-out]

Whaaat? I don't get it, what is it? Can you please explain further dumb it down for me. Thanks.

[@OppositePengui]

@@flat-out Depending on terrain some differentials are better than others, with the 24438b you can change the differential mode, by pressing a button.

[@ВячеславСидоренков]

Thank you, it's cool!

[@roadstar499]

If you extend wheel base the wheel wells on body wont match correctly...not sure why anyone would do that...😢

[@kuikmix]

Of course we don't need it if we use stock body. But we need it if we use longer body, for example using 1/24 scale body

[@Bumblerocco]

I tried cleqning the differetials.but when i put it back the throttle is reversed.how do inget it back to default controls.help please

[@kuikmix]

Maybe you accidentally flipped the right and left sides of the differential. For the rear, watch at 00:42 and ensure the differential gear is on the right side of the shaft.

[@oggarage9388]

Thanks brother 💪👀👊

[@kuikmix]

No problem 👍

[@rc_chan8572]

So many details ! thank you for this review , can we put a little fan above the motor ?

[@kuikmix]

I never found a fan that small enough for 130 size motor. And I don't think it's necessary, heat sink is enough. Also, if you can find a small fan for 130 motor, the fan needs to rotate really fast or it won't effective to cooling down the motor

[@rc_chan8572]

@@kuikmix yeah I agree with you i though about to put a fan like 3d print but airflow is not enough. I will order heat sink copper then you paste on the top or on the side motor ( i do not found any heat sink as you can fix with screw or fit the form of the type motor)

[@kuikmix]

You can use thermal tape to attach the heat sink. Thermal tape is like double sided tape but it transfer heat better than normal double tape.

[@antolopez9705]

Anyone knows how i can plug and play with 284131 new stock electronics a gyro? The one i got has different pin connectors that it's physically impossible to connect... I dont want to cut and soldering servo wire and gyro to receiver wire to change from 284131 type to more standard type, help me please!!

[@jeavenstubin5112]

You can probably find an adapter cable I think they use them on mini z

[@kuikmix]

I have a plan to make a video about this matter. I still wait for the cable adapter to arrive

[@vanthitran2800]

HI IS THE REAR DIFFERENCIAL IS LOCK OR OPEN ?

[@kuikmix]

Which model? For the 281431 is open diff. For the other models, watch the video, I already explain it,

[@vanthitran2800]

@@kuikmix ok thanks for the answer, my question was about the 284131.

[@ausgewogen]

Which one of the three cars has the lowest "whining" ?

[@kjetilpedersen583]

Same I think 💬 What Car is the best and oopgrad and loot's of different stuff to small Rc cars Drifting 😊 That's what I want to do of course I want to see how fast I can get it🙏😇

[@BBBB-re6ug]

Hi Heat sinks must be in direct contact with the motor, they won't do their job the way you put them, actually, it could even get hotter

[@mashedpotatoes5323]

That's really the best you can do. It's in direct contact with the motor casing which acts like a heatsink for the armature anyways. Adding heatsinks like that definitely help, even if there is no airflow it will increase the thermal mass.

[@kuikmix]

It's a thermal double tape, not normal double tape. But Yes, it's more effective if it's direct contact with the motor, which is impossible or at least hard to do because of placement. Don't ever think to solder it since it will damage the motor magnet (unless you remove the magnet first). So, it's better to use thermal tape than none.

[@vaulter2k18]

You didn’t talk on the tires. What are the other tires used for?

[@Cookie.x.monsterr]

Drifting

[@kuikmix]

I talk about tires at 00:50 Hard plastic tires: for drift Rubber tires: not for drift (on road or off road)

[@azkanand5832]

bang, bedain 284131 v1 dan v2 gimana ya?

[@kuikmix]

Bedanya yang V1 itu kabel servonya masih yang model normal. Yang V2 kabel servonya udah pakai yang kecil

[@TheJoshRed]

Any idea why these cars come with a 3mm center driveshaft but all I see available online is a 2mm one? Anyone else notice this?

[@mashedpotatoes5323]

I believe it's because they have been updated a few times and they slightly upgraded it. I just got my 284131 and it has metal differential pinion gears and I believe the 3mm driveshaft. Looking on AE I found a replacement motor with the same driveshaft attached already for about $8.

[@vincentwilcox1704]

Promo-SM 😚

[@ieatchickens]

This is a bot comment