Big thanks to Keeps for supporting the channel! Here’s the site if you want to check them out! keeps.com/woby
@caribguy2007 Жыл бұрын
Where did you get the curtain? These seem to fold up nice.
@geoffrylamotte-zw2le8 ай бұрын
The book provides clear illustrations kzbin.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO diagrams that cover many of the essential topics. The projects at the end of the book are valuable for enhancing your skills and creating your own furniture. A digital platform linked to the book that could offer the plans for other woodworking projects with the cut sheets would have been a nice addition, but overall, the book is excellent.
@geoffreygriffiths14873 жыл бұрын
For sanding the fan should be evacuating the booth through a filter, and for spray finishing the fan should be pressurizing the booth through a filter. When you are spraying a finish that you do not want contaminated with dust, the area must be free of dust in the air, so by pressurizing the booth with clean air it keeps dust out of the booth. It will take some trial and error to get you booth working well for both tasks. The box fan will not be powerful enough with the filter attached to do the job. Look for an old 3 speed furnace blower (from a scrap furnace), that is what I have used from time to time. Also be mindful of the type of solvents involved, your box fan's switch is not explosion proof and can spark off flammable solvents found in glues and paints that are not water soluble.
@brennangoodson33673 жыл бұрын
Dude….just….dude….you inspire me to keep improving my craft, thank you sir!!!
@kenmaira3 жыл бұрын
Heyyy We had the same idea, but with a different execution! I love your new space. Keep building and inspiring!
@veepsgarage3 жыл бұрын
Dude this is exactly what I need in my new shop!!!!!. Finally a folding spray booth that is easy to setup and take down.
@rganpat7413 жыл бұрын
You're a lovely energetic Craftsman. Thank you for your always positive content. It's much appreciated❤️🤗🙏🏽
@jcpettit10282 жыл бұрын
Bang up job on the booth, my good sir. And a very, very slick shop you've manufactured. Thanks for the free ideas
@anthonygianacopoulos99182 жыл бұрын
Officially my favorite woodworking Channell! Love this guy! Wooooo!
@daddyspooge13 жыл бұрын
Your new shop is shaping up into something really cool! Can't wait to see what you will be making in it.
@PillowFilledWithSpiders2 жыл бұрын
probably everything but made from recycled skateboards
@kellymedia994 ай бұрын
Just found my solution for making a in-garage spray booth. Thanks for making this awesome video, can't wait to build it.
@andrewbrown8148 Жыл бұрын
Wow, that's a really cool paint booth~! I love the portability without it having to be lugged around the shop. I'm definitely putting this on my build list. Thank for sharing this idea~!!
@SirMikeB3 жыл бұрын
Really liked this project. Great idea and execution!
@troykatt053 жыл бұрын
Positive and encouraging vibes coming your way.
@ZoliMusic3 жыл бұрын
Great solution for a small workspace. Love it!
@chrissetter3 жыл бұрын
Good job, this is amazing! I’ve been using the box fan filter method for 3 years on 3 machines, so far so good! I would recommend getting a filter with most pleats, which gives you the most surface area. This means more air flow, more time between filter changes, and more filtration. I’ve found that 3M (Filtrete 1900) usually has the most pleats (almost triple of the cheap brands on Amazon!).
@IMEEMADE3 жыл бұрын
Literally the smartest man on the internet. It's such a great solution!
@halterify43463 жыл бұрын
Intro had a massive 80's vibe. Love it
@elliottrogers-cline62463 жыл бұрын
Certified Banger Truly an inspiring project for someone working towards a shop and likely not having tons of space to use.
@JimG315473 жыл бұрын
That is a great idea and goes well with your folding stairwell. Thanks for sharing and looking forward to the next build.
@dekayscrafts3 жыл бұрын
Nice idea!! Woooooooo!!
@BunderChowed3 жыл бұрын
You have cool chanel too! #Subscribed
@matthewgoecks33693 жыл бұрын
Love all the work you've done despite all the stress you still knock it out of the park everytime!
@brianmaietta3 жыл бұрын
Keep doing you man! great spirit, great craftsmanship and great creativity!
@samaedo53413 жыл бұрын
This is great! I want to make one now. I had a really bad one that hardly worked, but the box fan with the filter worked GREAT! Never exploded.
@meaznet Жыл бұрын
Nice Job. I got a Laguna dust collector, this freed up my original Dust Right collector. I built my paint booth using the Dust Right. The ideal thing about that is, like the concerns you pointed out with the box fan, the motor for the dust right doesn't come in contact with any fumes that pass through the air movement. I don't think it would work to mount it to your sanding booth but the input could be mounted to the roof and a hose over to the wall with the Dust Right mounted there. Just an idea.
@jas121823 жыл бұрын
Nice Job! :) A friend and I were talking about your idea the other day and now we know how you did it. thanks for sharing.
@petenelson81362 жыл бұрын
Great looking spray booth, another item to add to my shop build. Building a one garage shop so space is important.
@ceetee35133 жыл бұрын
Try hanging a really small winch on the ceiling so when your going to use the paint booth you bring down the cable and hook it on the end of the booth to hold up the other end that’s just hanging in the air..it will help also incase those gas shocks ever fail..once your done u unhook the winch cable and wind up the cable and bring down your paint booth👍🏻
@MakerGray3 жыл бұрын
You inspire me so much! Bang bang bang. Nice job. Woooooo!
@williammoore41013 жыл бұрын
Dude, you're so positive and creative. Just stay awesome and I'll watch everything you put out there. Thanks for the great content.
@sgsax3 жыл бұрын
Another genius Woby Design. Seeing the evolution of this on IG was a great study on adaptation and problem solving. Seeing it all put together here was just fun. Always enjoy your attitude and humor. Bang, bang, bang, already done. Thanks for sharing!
@countsd13 жыл бұрын
Dude, that fact that you add your ads to the video itself will get sponsored lined up... Congrats. GENIUS!!!
@franklord78043 жыл бұрын
Great job on a space saving design for a paint booth. (positive and encouraging comment made).
@build.make.create.81543 жыл бұрын
great concept. I love seeing what you are doing with your small shop space. It gives me lot's of ideas
@nickbirdseye12733 жыл бұрын
hell yeah, going to use this as inspiration for a surf board shaping room.
Bang. Bang. Bang. Nice job! WOOOOO! Love it. From content to your enthusiasm. I have been wanting to do something similar in my garage as I have a 6'x8' fully enclosed booth taking up some significant space in my garage. Thanks so much for greasing my gears!
@120Livi3 жыл бұрын
It's freaking awesome! So simple and so clever!
@stillstanding843 жыл бұрын
King of making a small space work
@ludboya3 жыл бұрын
Positive and encouraging. Keep on building.
@SchysCraftCo.3 жыл бұрын
Very nice job Ben. It turned out very well. Hopefully you get great use out of it my friend. Can't wait to see what you do in your next video. Keep up the great craftsmanship and hard work my friend Ben. Keep making. God bless. Woo
@loft-schoolofblackjack5253 жыл бұрын
Positive and encouraging thoughts for you Woby.
@Worldsbestname2 жыл бұрын
Great stuff mate, love your enthusiasm lol esp at the end. I appreciate your work!
@EvanDunville3 жыл бұрын
Nice project. The polycarbonate is a great idea for the top.
@sksnormand Жыл бұрын
I love watching your videos and I think you’re very creative. Keep up the nice creations.
@WobyDesign Жыл бұрын
Thank you!
@sksnormand Жыл бұрын
@@WobyDesign you’re welcome
@TheBlueMuzzy3 жыл бұрын
Nice shoutout on Dekay! His creations are pretty rad. Great setup, my dude. Glad to see your new shop is treating you well!
@pedrouthurriaga82683 жыл бұрын
Great idea, and really well executed!
@MrDanyoumell3 жыл бұрын
GREAT JOB WOBY - love it. Nice work.
@Spleen_Alpsen3 жыл бұрын
This is a really cool and unique idea
@chefgoldielocs3 жыл бұрын
I tip my hat to content creators. They're are so nice and respectful to the haters and know-it-alls in the comment section.
@mikeh49243 жыл бұрын
Positive and encouraging to make your wife proud... Hi Ben's wife, Ben is so awesome and we all love his great work! He inspires us in our mission to create cool things as well. Thank you for sharing him with all of us!
@soleil63432 жыл бұрын
I'm a new subscriber getting ready to finally set up my first (tbh very tiny) shop, and wanted to say that you wanting to teach people how to put stuff together instead of just selling people plans is super refreshing. I am actually considering buying the camera jig plans soon though for ease of setting stuff up. Your energy and enthusiasm for this stuff shines right through, and I'm loving every video I've seen so far. Thank you for all the work you put into this!!
@avenuex37313 жыл бұрын
Box fans and AC filters are a great way to go. I made a bank of nine for my booth. Years and no complaints. Better average CFM than a commercial unit for short runs, even if it loads up faster in longer use.
@ksross083 жыл бұрын
I love it ... "Bang, Bang, Bang, and Nice Job"!!! Sounds like a T-Shirt idea :).
@dannysantos12663 жыл бұрын
All nice touches - mostly glad to see you out of that crazy situation. ✌🏾
@BunderChowed3 жыл бұрын
Good job bro! Have you considered the use of a pulley system to open it up or keep it up. ie rope attached to the handle at the end, running through pulley wheels on the ceiling / wall etc. Then a few small weights evenly spaced out attached to the curtains to keep it down. Or if you have a super high ceiling, you can reverse it to have the pistons bring the whole frame down upon opening.
@twoidiotsoneship3 жыл бұрын
I came to the comments to suggest the same thing. If you have the unit swing down from the wall/ceiling you can still utilize the wall space and if you decide to have a bench or work surface, you don’t need to move everything out of the way to swing up the booth.
@BunderChowed3 жыл бұрын
@@twoidiotsoneship Yea a bench is a good idea
@chiunah3 жыл бұрын
i know nothing about woodwork but your videos are very enjoyable...woooooo
@curtismills3033 жыл бұрын
Love the innovation. You could hook up a dust collection line to the top side of the fan body and therefore would have little to no dust and crap flying around the outside of your spray booth. Just a thought. Still love it still and the folding stairs are my favorite.
@RestoredChannel3 жыл бұрын
Really nice build. Thanks for sharing🤙
@michaellitewski23523 жыл бұрын
BRAVO to you and the shop!
@ClintonCaraway-CNC3 жыл бұрын
Fantastic idea and great execution on the design and build!!!
@Mrlxpumaxl3 жыл бұрын
This gives me so many ideas for things to do in my shop! Great job, keep it up! I have had similar issues with gas struts.
@bilbobagginstwo3 жыл бұрын
Power sanding on a downdraft table would help you, cool build video too. Downdraft table has many holes in tabletop with filters and fan in the base
@nicolaspardo96903 жыл бұрын
It looking good the shop! It is great that you can start again to do stuff with skateboard!!!
@bruce-le-smith3 жыл бұрын
awesome, exactly the amount of design I might need, nice that it's not over engineered
@danlynch11543 жыл бұрын
Really like this. Very cool and handy! Nice job.
@frankierzucekjr2 жыл бұрын
You're a freakin genius. Love the new shop and how you did everything. Just awesome. As a carpenter myself I love all of this and the stairs are one of my favorite parts.
@andrewlorigan18223 жыл бұрын
Sending good vibes! Also, we’ll played with positive punishment 👏 1:15
@brycemariano59553 жыл бұрын
Awesome work! Seems like it will make a huge difference. Can't wait to see your first skateboard project in the new shop!
@andrewadams96862 жыл бұрын
I totally love this and I'm so gonna make one! thank you for this!
@brentfrench7523 жыл бұрын
I’ve been toying around with figuring how best to put a sanding/spray booth in my garage shop and this is a great idea! Great job!
@joshuamick11673 жыл бұрын
You could try adding legs to the far corners that latch to the sides when stored. it would allow for more weight and still easy to store
@alexhogenson17993 жыл бұрын
Just ordered the struts for my new shop! Can't wait to get something similar put together. Love the video!
@BradyTTube3 жыл бұрын
Bang, bang, bang! Nice Job! Keep up the amazing work, my man!
@heyitsthatdude173 жыл бұрын
Positive and encouraging comment to make your wife proud Nice job
@tysinschaugaard27853 жыл бұрын
Already started making my own, freaking loved the idea when I saw it on your Instagram!!!
3 жыл бұрын
Muchas gracias por el vídeo. Una gran idea! Un saludo desde Asturias (España)
@danyo415 ай бұрын
Great idea with the gas pistons. Definitely giving that a go. However, the polycarbonate is pretty expensive in Canada. Can't find anything like that under $200. May have to use some 1/8 meranti board or thin foam board. Nice build though!
@PattySherinEntrepreneur3 жыл бұрын
Love your builds and process! Keep up the great work!
@seventytwo10010003 жыл бұрын
Great work love the idea and how you went about it.
@baboon7th3 жыл бұрын
Build a box/bench with perforated table top and tapering bottom, then hook up the vacuum on the bottom. Basically a downdraft sanding table.
@sprayaholic Жыл бұрын
looking to do something like this myself. nice job
@zijdzijd3 жыл бұрын
Ben, love the new shop, keep up the great work it's awesome!
@allanlam35753 жыл бұрын
Love the progress and creativity! Keep it up homie!
@1arctos3 жыл бұрын
Looks Great. Good job, I may do this in my shop!!
@ryannichols732 Жыл бұрын
Love the design. I’m definitely going to borrow it! Do you think another fan would be helpful or too much weight?
@chrisgenovese81883 жыл бұрын
This is so sick! Definitely some Dekay vibes.
@RLLWoodworks3 жыл бұрын
Always awesome Ben! I just got my first shipment from Rockler earlier this week.
@Mark_Dee3 жыл бұрын
Hi Ben, cool booth. If I had your shop I would swivel it up not down that would keep the wall free for other things, or you could leave a bench there. Swivel it up could be done with a rope system so no gas struts needed. Cheers Mark
@jholmessiedle3 жыл бұрын
Love this Love how positive you are Informative, and fun!
@scottdebruyn70383 жыл бұрын
Very Cool (in my generations vernacular... 62 :) I'd like to make something similar to make a painting booth for painting my car. I'll likely rent this out, or sell it, as a portable booth to other back yard car guys like myself when I'm done with it. Thanks for the ideas and tips!
@nachtdiertje19723 жыл бұрын
Great job you've done, but why don't you make a vacuumtable? This way you get rid of dust, before it can escape outside. In combination with the funnel you already have, you should be safe and use your dustcollector at max.
@OficinadoArthur3 жыл бұрын
Your workshop is amazing! I live in Brazil and things seens to be a bit harder to acquire but Someday i will get mine
@CodyKhaoz3 жыл бұрын
Thank you!!! This is dope and really ha and thinking of some kool ideas and projects!
@bjk123853 жыл бұрын
I like the plugs...i follow both those channels...subscribed!
@5.12designlab43 жыл бұрын
I've been using a box fan with furnace filter as an air cleaner in my (small) shop for years. No explosions here yet. If it blows, I'll be sure to let you know so you can retire it sometime in the following 3 years.
@fernandodelaparranicolassa52673 жыл бұрын
Nice job, Ben!
@ederorellana99193 жыл бұрын
Maybe it’s time for you to upgrade to the festool sanding system. It will definitely help with the dust collection and the RO150 will make sanding a breeze in geared mode.
@orion77413 жыл бұрын
festool....... lol, yeah right. what, do you think he is a millionaire or something??? their products are only made for the rich people. plus they are not that much better honestly. head down to lowes or home depot and get standard tools, they work just as good and sometimes better than the uber high priced tools like festool!
@CrudeButEfficient3 жыл бұрын
Nicely done! Would be interesting to see how much dust that will escape the dust collector and stick to the ceiling fan after a month of use.