WONDOM JAB5 ADAU1701 DSP Audio Amplifier Board for DIY aptX HD High Power Bluetooth 2.1 Speakers

[@Toid]

This looks amazing! Love that it works with Sigma Studios and the multiple configurations. If you want someone to test one, feel free to reach out. Looks very powerful. 👏

[@lio1234234]

Haha, I knew you'd jump on something like this Nick.

[@stonersloth4208]

Is it possible to control the I2S output with the Dsp? So for examaple using the Jab5 in the 2x200watt mode with a high Pass and a Subwoofer on a second amplifier with a low pass via the I2S output?

[@WONDOMAudio]

Yes, we cascade 2 JAB5, now it is by default firmware, we provide firmware for download.

[@fabiuh991]

I still cant save a new program into the eeprom... It loads, i can hear the difference in sound but after removing power it goes back to the default program

[@scottaberdonian7374]

Hi. I have JAB4 . downloaded software for it. Tried opening with Sigma Studio and make 4.0 crossover BUT crossover area is such a mess there! Could you make a video tutorial for it please?

[@WONDOMAudio]

Hello. We have made a video on building an audio 4.2 system with 3-way digital crossover with JAB4. Maybe you will be interested in it. Here is the video link. kzbin.info/www/bejne/f5TRgKuVoqhpr68 You can download the demo program for reference. BTW, PC UI for JAB4 has been released. If you find SigmaStudio too complicated, you can try the PC UI control. Here is the download link. store.sure-electronics.com/images/documents/Miumax%20for%20JAB4-1.0.5.zip

[@mstar501]

Hi, I just purchased a complete set(waiting to receive it). But I didn't find the app(android) to control it yet! Did I miss it somewhere? Thank you.

[@WONDOMAudio]

Hello, thank you for your watching. Please note that for now, the JAB5 supports PC UI control and SigmaStudio programming. The APP is under development. The download link for the PC UI is as follows: files.sure-electronics.com/download/Miumax_for_JAB5-1.0.5.zip. Wish this could help you. Have a fantastic day~

[@JohnDoe_333]

whats the minimum impedance in bridged config?

[@JeradBenge]

Is there a thermal pad, or TIM under that heatsink? I don't see any mention of it, and it's always something I take into account when planning a build.

[@SeatFX]

Hello, I'm planning to use the JAB5 in my car. Is there an easy way to get it to go into standby with +12V, REM (ignition) and GND?

[@WONDOMAudio]

Hello. JAB5 is not designed for car audio applications. It requires a lot modifications if you want to use it for car audio. We will release audio amplifier for car audio in near feature. Please kindly stay tuned.

[@SeatFX]

@@WONDOMAudio Too late, I ordered it already xD. I will use it with relays, it should be fine.

[@venanss5270]

using jab5 in 2.1 system do i need 3 cables to connect each speaker? or is only the two speaker cables that come with the amplifier enough to assemble the 2.1 system?

[@fabiuh991]

2.1 uses both negative togeather and both positive togeather for the subwoofer and the jumper open. For the other two speakers each on one uses 1 positive and one negative with the jumper shorted.

Would you have a card with linkplay (WiFi)

[@patzn123]

Would the JAB5 also work with 4ohm Speaker? In the datasheet it only lists 6ohm. How is the Powerrating at 4 or 8 Ohms?

[@WONDOMAudio]

Hello. JAB5 can work with 4Ohm speaker. With a 36V power supply, the output power is around 100W per channel into a 4Ohm load, and about 81W per channel into an 8Ohm load. Wish this could help you. Have a nice day~

[@patzn123]

@@WONDOMAudio Thank you for the answer. Will the jab5 also work with 41v because i would like power it by 2 batteries?

[@WONDOMAudio]

​@@patzn123 The recommended power supply range for JAB5 is DC10-39V. It's not suggested to apply voltage exceeding this range, which may cause damage. Have a nice day~

[@trydoingsomething7156]

Is there a wondom amp that can drive a 1*500wrms 4ohm subwoofer?

[@WONDOMAudio]

Hi. You can take a look at the 1x1500W IRS2092 or 1x1200W Brick DBKL3 audio amplifier board. Here are the links for your reference. store.sure-electronics.com/product/151 store.sure-electronics.com/product/636

[@liminalsunset]

I just bought this board. It appears that there is some idle hiss/noise from it, even if the DSP is muted. The noise appears to go away after a few seconds (amplifier turning off?) What's the best way to troubleshoot what stage this noise is coming from? Thanks!

[@fabiuh991]

I bet it comes from the BT module

[@fredbartram8707]

Looks great! Is 1x400w also possible?

[@WONDOMAudio]

Actually not, JAB5 series use TDA749x, so maximum supply voltage is 36V, so maximum output is about 150W per channel at 4 ohm.

[@CoquiAudio]

the version Bluetooth 5.1 would be later?

[@lucastonoli3256]

Well, other than a very minor reduction on battery consumption, 5.1 doesn't bring any significant improvement in terms of performance (it does for convenience maybe, but for this application, you won't get better audio quality, range or anything like that).

[@lio1234234]

Yeah as Lucas said. 5 is good enough :)

[@strofeldmanufaktur-einziga5417]

I am currently trying to run a JAB5 via 7s3p Li-Ion Battery (24V nominal, 29.4V @100%) but after a couple of minutes the Standby-circuit seems to fail. Thats now the second board with this failure so it seems to be a consistent problem. The Amp is still muting when switching to Standby Mode, but the BT-Module and DSP stays active all the time and can NOT be switched off anymore. Since the Battery has a 20A BMS and a 30A fuse and is also well under the 36V voltage rating of your device i have no clue what could cause this issue. Please help me to find a proper solution for this issue as soon as possible.

[@WONDOMAudio]

Hi Strofeld, we found your email and will reply today. Thank you for choosing our products.

[@jortpeters6419]

Is there a difference with Sure Electronics AA-JA33286 and this one? Same company, and seems the same. Except price and name?

[@WONDOMAudio]

We are same company, Sure Electronics is the company name while WONDOM is our brand.

[@HistoricalJourneys.]

Hi sir my order stuck in line hual last 5 days how much time take to reales and Deliver to my door step please help I don't understand because I am order frist time

[@WONDOMAudio]

Hello, please contact our aftersales customer service at [e-mail] with your order number. We will promptly assist you and reply as soon as we receive your email. Have a fantastic day~

[@ritasingleton6730]

I'd like to use this as a stereo subwoofer amp, but I see that in stereo (highpass filter) mode, bass output is cut off below 250hz, can I get output down as far as 30hz ?

[@fabiuh991]

you can change the filter parameters on sigma studio

[@frankcollins4743]

Can two of these be used in a three way active speakers, one per box obviously?

[@WONDOMAudio]

We are releasing a product for 3 way crossover, and this one also fine for three way, configured as 1+1+PBTL, or use external digital amplifier to get better audio performance, plus 2xPBTL for woofer.

[@frankcollins4743]

@@WONDOMAudio Thank you for the response. As a suggestion, I would like to see the following; Input options of analogue, I2S, and SPDIF coax and Toslink One input with four outputs, also providing for four way speakers (if this isn't already the case) with an extra (fifth) inverted signal only output for bridging for the bass Two channels bridgeable for the woofer to compensate for baffle diffraction loss, that is, one output to be selectable for normal or inverted signal For a three way, two of the four outputs could be used to drive woofers in parallel to compensate for baffle diffraction loss, or two woofers in unison to halve the size of the bass enclosure I think I covered my wish list and I think it also enhances the potential sales since it covers so many options DIYers would like to use. I have a question too, please; how is 2xPBTL done? Regards.

[@dennissinger7880]

Why the old chip tda7498?? Tda7498e have more Power or the new tpa3255d2 ist verry nice and need same voltage

[@WONDOMAudio]

If you try to open the heatsink, you will find it is TDA7498E:)

[@dennissinger7880]

@@WONDOMAudio thank you, i thinking many time why not 7498e .. 🙈 i looking now for my project. But i have one question. Why 6 ohm minimum ? Can make a big 4 ohm subwoofer?

[@anandshah71]

Would like to try this board for a powerful boombox 2.1 or 2.2 config Does Wondom have any such boards with airplay

[@WONDOMAudio]

Our airplay board will be released soon, they will be JAB6 till JAB9, all support external airplay modules.

[@TELO228]

Is there a board based on TPA3255?

[@WONDOMAudio]

Hello, you can take a look at the BRU5, BDM8 and BDM9 on our Ali-Express shop, which are based on TPA3255. BRU5 link: www.aliexpress.com/item/1005004895645420.html BDM9 link: www.aliexpress.us/item/1005005148992816.html BDM8 link: www.aliexpress.com/item/1005004831588228.html

[@TELO228]

@@WONDOMAudio No, no, you probably didn't understand me, I'm interested in TPA3255+ DSP ADAU1701 on the same board

[@cortexdb]

Can the I2S output of JAB5 be connected to your I2S to analog audio conversion board (CS4334)?

[@WONDOMAudio]

Yes, but we will suggest to use DAC without MCLK and maybe better performance, or maybe an ADAU1701 as DAC is a good idea too.

[@jh4781]

Se puede usa con un subwoofer de ( 2 Ohm ) 200rms a 24v?. Ví la conexión para el subwoofer y dos parlantes. La conexión para el subwoofer serian los dos positivos juntos y los dos negativos juntos para sacar los 200w? Estoy muy interesado en esta placa pero tengo mis dudas. por favor me pueden responder. Can be used with a (2 Ohm) 200rms 24v subwoofer. I saw the connection for the subwoofer and two speakers. The connection for the subwoofer would be the two positive together and the two negative together to get the 200w? I am very interested in this plate but I have my doubts. please can you answer me.

[@fabiuh991]

Parallel bridge ++ / -- -- Shunt off. But i dont know the minimum impedance since its parallel..

[@nkstudioofficial]

I need this asap :) , what parcel are you deliver in Europe? Thanks!

[@WONDOMAudio]

Hi mate, we use DHL and TNT to ship to Europe. Takes about 5 days.

[@charliesheasby1934]

Would I be able to power this with a 10s 36v (42v max charge) 18650 battery pack? Thanks

[@lio1234234]

Yes you would but you would still need a charging board and something to tell you when you've reached minimum safe battery voltage. I'm surprised they hadn't replied to you by now.

[@amirfakhri7296]

Hi dayton amp using your copies right as reserved purpose.

[@Anri81]

where to get ICP5?

[@niklassundgren5993]

How many watts @8ohm?

I would also like to know

[@HistoricalJourneys.]

Hi

[@WONDOMAudio]

Hi, thank you for your watching. May I help you?