Узнаю школьный токарный станок по дереву, классные были станки, на них мы учились что-то делать своими руками. Огромное спасибо советским школам, мы многому там научились, а главное быть людьми
@MrMAKC-pn3ip5 жыл бұрын
СТД 120м узнаю из тысячи!!!!! Красава автор
@ИванКрецу-д3ь4 жыл бұрын
Я свой тоже восстанавливал! Но выкинул всё лишнее, эл щит, кожух, т к от их вибрации лишний шум. Эл двигателя не было, установил от советской ст машины Эврика-3 на 650ватт. Работает отлично! Переднюю бабку, естественно обильно смазал а на заднюю приспособил враща,ющиеся центр! А теперь служит верой и правдой!
@Lynn.Lawson3 жыл бұрын
You are a talented man with many skills and I'm certainly impressed. I look forward to seeing your future projects.
@homemadeinlviv80413 жыл бұрын
Thank you! Cheers!
@georgespangler15174 жыл бұрын
Nice lathe,,someone loved it to put a vfd on it,,,I love to buy and restore vintage tools,,,have bought 3 wood lathes and 4 metal lathes in the past 4 months,, sold 3 I restored and it payed for all 7..
@brittanyazzopardi59194 жыл бұрын
The bug is inspecting your work. Well! Very good restoration on that lathe my friend. I,m a carpenter joiner and I do some restoration from time to time. Especially, when I buy a second hand woodworking machines. I,m very fussy on my machines. I love to see them nice and well maintained. Vincent la Valletta malta.
@DanKoning7774 жыл бұрын
*What you build always ends up well built and beautiful* which only proves you don't need the best of everything [like this old lathe] *to make an excellent product.*
@billsutherland21283 жыл бұрын
Very nice! Great job on the lathe and this video. More of the same, please.
@colinaskey97776 жыл бұрын
an absolutely superb restoration of an abused and no doubt badly used wood lathe,will give you year's of good useful return,well worth my thumbs up
@ЛарисаКопылова-с1х3 жыл бұрын
Вы и это можете делать!!! Разобрать пожалуй любой может. Но вот как всё на место поставить, да ещё и правильно! ТАЛАНТИЩЕ! 👍💝👏💮
@VadimReset2 жыл бұрын
Я, тоже, таким маслом пользуюсь. Нет конкурентов у него))
@dr.skipkazarian55565 жыл бұрын
Fine work not just in restoration but as well in beauty. This video would be very useful as a teaching aid. You are to be praised for your talent, patience, and eye for the intrinsic as well as the functional value of this tool.....excellent effort! Greetings from Kauai.
@dennisfahlstrom74225 жыл бұрын
A great rebuild. Any way of making it a variable speed? I took note of your electrical skills. That would be the icing on the cake. My first lathe was a Jet midi. You could change speeds with it by changing belt placement. Not great but better than nothing. I’m up to a great old Oliver now. It was made before me and will outlast me and my heirs. It was made in 1943. I was made a couple years later😁😁
@glassbottlelamp10996 жыл бұрын
Від усіх Ваших відео йде масса позитиву. Дякую , і щоб вистачало оптимізму і бажання.
@homemadeinlviv80416 жыл бұрын
Дуже дякую, за цей коментар! )
@ponkkaa6 жыл бұрын
Nice work. With all that power that machine will never bog down.
@yazdankhodabandehloo1429 Жыл бұрын
عالی درست کردی . آفرین ...
@niklar555 жыл бұрын
For ''hobbyist'' you have an amazingly well equipped workshop.!
@iamrichrocker6 жыл бұрын
and the video comes to a full circle..great editing......and really liked the electrical sorting...
@miguelrodrigo3233 Жыл бұрын
Buen trabajo y buen equipo de herramientas. Saludos.
@Cradley6846 жыл бұрын
Fantastic Job hope it does some great turning for you, have a nice day, Brian UK !!!
@raymondswarmer14334 жыл бұрын
Beautiful job. Looks like brand new. Wish I had it myself.
@kamelcross5 жыл бұрын
Amazing performance, i loved the military color, thanks.
@SilvioRSantosP135 жыл бұрын
Até o besouro foi conferir se o Serviço ficou ótimo. Parabéns pelo belo trabalho quê fez e ficou Nota 10.
@Hydrargyrum7.626 жыл бұрын
Отлично получилось! Имею такого же школьника, ждёт своего часа на восстановление, а тут такое отличное видео выложили. Обязательно учту при восстановлении своего
@homemadeinlviv80416 жыл бұрын
Спасибо!)
@e.stgo.79986 жыл бұрын
Sir, great work and thank you for sharing 🇵🇷👍👍👍👍👍🇵🇷
@furbarator6 жыл бұрын
Outstanding restoration.
@NickDV0076 жыл бұрын
Great restoration - as always 👍👍👍
@germenjoyce2536 жыл бұрын
Well done ,Greetings from Hong Kong
@homemadeinlviv80416 жыл бұрын
Thank you from Ukraine! :)
@desijatti14633 жыл бұрын
O
@desijatti14633 жыл бұрын
@@homemadeinlviv8041s
@finkelmp6 жыл бұрын
Beautiful work and tool.
@geoffcraggs15966 жыл бұрын
Brilliant work mate, well done.
@BUILDNIGHT6 жыл бұрын
beautiful machine, bud! very nicely done.
@antionio77db6 жыл бұрын
Wow a lot of pieces.
@nikolayvoytovich46585 жыл бұрын
Awesome job !!! Great videos.
@WoodBrothersNDS6 жыл бұрын
Beautiful work!!! Greetings from Italy 👍 👍 👍
@homemadeinlviv80416 жыл бұрын
Thanks from Ukraine! :)
@georgespangler15174 жыл бұрын
I put treadmill motors on all my lathes,,unbelievable power and so smooth and quiet, and the soft start is so much easier on the lathe
@VENKOwood6 жыл бұрын
Отличная работа, вторая жизнь
@homemadeinlviv80416 жыл бұрын
Спасибо! )
@billyring46 жыл бұрын
Great job keep those videos coming love learning new things
@joem14136 жыл бұрын
Great job, and the video was excellent also...
@huacheng86 жыл бұрын
so much satisfied to watch this
@АлексейЧезганов6 жыл бұрын
Отличная работа)))
@HotRod126673 жыл бұрын
The beetle approves!
@baorozzo6 жыл бұрын
Very nice job!
@Larry1942Will5 жыл бұрын
Very nice up grade on the wiring. That is an unusual drive center, for my part of the world. I'm offering this as help, not criticism! All the dowels you put in, did provide alignment but did not add strength. So you could have used a lot fewer. A proper glue joint is stronger than the wood. The mitered frame around a solid wood center will likely fail in the corners if the moisture content changes. The batten on the bottom side would have been better had you provided slots & washers to allow for the inevitable wood movement. I hope they don't split the nicely done wood. The reason is that wood moves very little in length but quite a lot in width, with changes in moisture. Winter to summer conditions will cause the changes in moisture, even if you put finish on the wood. Happy turning.
@mariotoro4605 жыл бұрын
Very good.
@lacaver646 жыл бұрын
very nice video
@ابوعمر-ذ2ع5 жыл бұрын
great job
@farny55576 жыл бұрын
superb dude it would be a shame to get it dirty brilliant
@plasma32114 жыл бұрын
Can you tell us some details about the Lathe? Like the swing and bed dimension. Is the motor single or three phase, what HP the motor is? Also can you tell us something about the the pulleys and motor/pulley shaft diameter? I am restoring an older unknown model small wood lathe that was given to me for free. It has no motor needs new bearings in the pulley shaft and the tubular bed rod assembly is missing. Most of the lathe is aluminum except for parts like the tool rest etc. Thanks! Great resto-job BTW.
@user-xg7yo3tm7k2 жыл бұрын
Это станок из России, производился для учебных завидений, школ в СССР. СТД120.
@okhmaniuk6 жыл бұрын
Круто! Став як новий! Молодець👍
@kostyakrykun16136 жыл бұрын
Очень круто. Золотые руки
@АртемСимонов-ц4е6 жыл бұрын
Одни словом "красавчик"!!!
@homemadeinlviv80416 жыл бұрын
Simonov Artem Russia Спасибо!)
@user-xg7yo3tm7k2 жыл бұрын
👍 Это русский станок стд 120 школьник👍👍👍👍👍
@daemonsin39526 жыл бұрын
Если судить по пускателю, то станок из СССР. Удачи!!!
@homemadeinlviv80416 жыл бұрын
Спасибо, так и есть, ето школьний станок.
@aspirina7886 жыл бұрын
Hermoso trabajo !!
@thebabylon29336 жыл бұрын
nice job
@АндрейКущик-м6щ4 жыл бұрын
КЛАСС! Станок,наверное и с новья таким не был крассивым!
@aaauxilia34603 жыл бұрын
Magnifique !
@eloyelwawero6 жыл бұрын
Muy buen trabajo
@glennmoreland64576 жыл бұрын
Well done
@tagiti6 жыл бұрын
nice job.
@antionio77db6 жыл бұрын
Love ot doing a good job mate.
@ViajerodelTiempo3.06 жыл бұрын
Awesome👋👋👋💪💪💪
@kazarinovnikolai6 жыл бұрын
Супер , осталось потренироваться в использовании резцов )
@kaycox55556 жыл бұрын
Simply beautiful job - best wishes, from the center of California & congratulations.
@hectorjalil42396 жыл бұрын
Kayinfso Here Ah
@lyntoncox78805 жыл бұрын
Great job and thanks to the military for the paint eh? Rather you than me tackling the electrics. Always wise to have circuit breakers specially if you have none in the house!😉😁
@louisdale71156 жыл бұрын
A nice Job !!!!!
@BobsTwoCarGarage5 жыл бұрын
I'm restoring an old Delta wood lathe. the motor mounts below on a hinge. Do you think the weight of the motor is enough to make the belts work or does the motor need to be locked in position?
@WeirdHarold496 жыл бұрын
Very nice. I think I would have shimmed the head-stock rather than mill the tail-stock -- but then I don't have a mill or know what all you checked before milling.
@MrAlexales5 жыл бұрын
В ел.шкафу коли купував станок таки була пуста чекушка чи ні?))) Лайк за відео, ще один апарат став у стрій, респект!!!
@azadkhan7796 жыл бұрын
Nice
@MrLukealbanese6 жыл бұрын
Lovely
@anatolijlee78334 жыл бұрын
Хороша робота .
@soulbrothers77896 жыл бұрын
Very good keep it up man :)
@timmermans636 жыл бұрын
fijn job,grtn uit schoten
@hennysriwahyuni8255 жыл бұрын
Mantep pak de
@gedym54436 жыл бұрын
On the 17th minute where you take all the old contactors and terminals out, there was what I believe a rectifier on the bottom right corner. Which is a diode, so the power can't travel back when shutting off the lathe. Or if it is more than one of these - it could be used to convert AC to DC or act as a soft start of sorts. You did not put it back. Do you think it is not needed or maybe you had a schematics to see what circuit was it in? Anyway, beautiful work. Privet iz Litvi.
@ТакАлександрович5 жыл бұрын
На старых контакторах была реализована схема электродинамического тормоза. Это быстрый останов двигателя после отключения.
@ВиталийШмаков-ц3ч5 жыл бұрын
Класс! Молодець!
@iuriikryvoberets2886 жыл бұрын
SUPER!!!!!!
@ferreiramotos44163 жыл бұрын
Muito bom 👍, forte abraço de nós do CANAL FERREIRA MOTOS
@woodworkingmachine32965 жыл бұрын
nice
@ilmondodimassi6 жыл бұрын
Very nice
@thiggy12496 жыл бұрын
How is it that the tail stock was hitting high in relation to the head stock? I would think that wear would cause the tail stock to register low, and not high.
@wrkshop714 жыл бұрын
Headstock from a different lathe is my guess.
@СергійВасильєв-б4и5 жыл бұрын
Станочок вийшов добрий,як для себе... а жук першим прилетів обісрати(жарт) :)
@jagdeeshuiekyuieky97814 жыл бұрын
Sir ye मशीन कितने की बनेगी mujhe bhi banbana h me mp se hu
@arturciubotaru69656 жыл бұрын
В конец появился майский жук, принять работу.
@yasarmevlut83766 жыл бұрын
Artur Ciubotaru да проверил все размеры
@thiggy12496 жыл бұрын
Great restoration of that old lathe (and good turning demonstration). Does the lathe have a noisy bearing, or is the sound from the belt drive? I like the insect at the end!
@sfeddie14 жыл бұрын
Stanley Thigpen. I agree. Sumpin ain’t right. That lathe is way too noisy. He never showed taking the headstock apart, so we don’t know if it has ball bearings or plain bushings. If ball bearings, they are really worn or need lube. If bushings they need replacing. Maybe it’s the motor bearings? Also, all of that sheet metal around the pulley assembly amplifies any noise. Remember this is a low end Russian lathe.
@marcosmendespontevedra6 жыл бұрын
THE BEST!
@alglezvin726 жыл бұрын
Awesome job...! I will like to know where can I get the stamp than you are using to put you brand ? Thank you
@homemadeinlviv80416 жыл бұрын
Thank you. This hot stamp was made for me at one of the factories in my city.
@randynovick79726 жыл бұрын
That was great! It reminded me of Hand Tool Rescue! (Nice beetle, too.) Question: were you worried at all about lead in the paint you were stripping? Thanks very much for sharing this.
@homemadeinlviv80416 жыл бұрын
Thank you sir, I didn't know about lead in the paint.I wore a mask. Next time I'll better think about safety.
@toddbowles5 жыл бұрын
Inspiration
@heru-deshet3596 жыл бұрын
Beautiful! How do you pay your Q.A. inspector?
@murrayanderson94116 жыл бұрын
very nice. does it only run at 1 speed?
@homemadeinlviv80416 жыл бұрын
Thanks, there are two speeds
@VadimReset2 жыл бұрын
И станок такой делаю, только ТСД-120. А у Вас СТД-120М
@kopriva0076 жыл бұрын
Great work, bravo. The bug was helping you this whole time? :)
@homemadeinlviv80416 жыл бұрын
Thank you. I had couple of them, I like these bugs, these weeks they are everywere and they bring me nice mood! :)
@seckinuygur89284 жыл бұрын
very good but your motor driver must be...for motor velocity.
@MrFabel156 жыл бұрын
центр в передней бабке болгаркой на максимальных оборотах станка выправить можно, заготовку бить перестанет.
@tixonok6 жыл бұрын
У нас в школе такие были
@TheTagirbeg10 ай бұрын
Красиво. Но функционал что до, что после.
@kengeman19766 жыл бұрын
super
@maryanstefanishin29596 жыл бұрын
шкільний токарник із трудового навчання, а підшипники ніби гудуть, або сухі, а можливо і замінити потрібно