Wood Shredder Blade Maintenance

[@djaffarsadat2885]

Good work Mr.

[@damirdze]

I would request the engine turned off first before stepping close to these blades 😁

[@Jimo225]

that screen seems most ingenious to me. it looks like its designed so that each layer is raised on one another to create a new anvil at each level. or am i wrong in thinking that's the purpose of the design>?

[@rich.trails]

Serious machine

[@MAXIPlywoodLilydale]

How come not all blades are being used, there are several pockets empty?

[@bodders1029]

i would imagine the video was edited in such a way that it looked like he left them out but in fact probably didnt?

[@verteup]

Don't need em all. Some are spares.

[@samkom33]

@@verteup its not just spares. if you add all the knifes thats possible you cut shorter-smaller chips but use more fuel on same logs

[@RODALCO2007]

Expensive exercise when rebar hits the blades. Nice machine.

[@bodders1029]

re bars are not that bad...100mm bar is very different!

[@alexanderdraws6593]

Warum ????? Der Kumpel fährt halbe Belegung und hat statt der Abdeckplatten bzw auch Blindmesser genannt , die Messerhaler für volle Belegung drinnen. Ist doch rausgeschmissenes Geld ! Der Verschleiß an den Haltern is doch Wahnsinn !

[@skuresture]

Is that a jenz chipper? I am pretty sure we manufacture those exact knifeholders at my shop. If you want good price on spare parts contact me

[@Віталій-з3ю3с]

Цікаво з якої сталі ножі були зроблені..?

[@ЕвгенийИгоревичПотапов]

Жаль нет магнитного датчика... :(

[@cditzler6313]

thats awesome easy fix very little down time looks like can be replaced with cut blades from motor grader

[@aperson9456]

No maintenance needed. That shit should remain that way.

[@cantororeidagambiarra]

Top de Mai's essay markina

[@NorthEastFool]

A titanium implanted human hip could do similar damage if the engine is not turned off while doing the repair. Be safe!

[@michalkotulak4948]

Hello,where i can buy this impact wrench?

[@bodders1029]

Ingersol Rand i think was the brand

[@onedayagogo]

aha! so this is where rebar comes from. i knew it...

[@MC-pg2ko]

No way would I be near that drum with the motor still running! 😱☠

[@juergen07091973]

Tja, jetzt stelle man sich mal vor, da wäre richtig Eisen reingekommen und nicht so Puddingeisen.... Mal so ne 200mm Schraubenwelle zwischen die Stämme schmuggeln....

[@ИгорьДьяченко-м5б]

Belarus 2020 Zabudova

[@ВасяИванов-р4б]

Если б это случилось в России-я бы не удивился.)

[@realstrannik]

Святой валежник уничтожают ироды.

[@ЕлизаветаМеньшова-л2н]

@@realstrannik 😄😄😄😄

[@mattseymour8637]

Those blades are quite chewed up

[@craigschiller1599]

Doppstadt AK430 eats metal all day long.

[@bodders1029]

yes because its a shredder not a chipper!

[@oleksiy.tryfonov8]

The fittings, not good for scrap metal shredders too)

[@anniehegon9470]

Oleksiy Tryfonov faire un faut plafond avec poutre apparante

[@leonardomigot4165]

hell what a mess on the chipper

[@scottpecora371]

Ok perhaps I'm naive and ignorant but for the obvious cost of this machine not even factoring in the cost of repair and down time I think it's absolutely redictculess there isn't a metal detector to detect and stop this very thing from happening. I would think it's a given that you're going to encounter metal bars, brackets, spikes and God knows what else when shredding this type of mixed material. To not have some form of metal detection that will automatically stop the machines feed mechanism and alert the operator so that the shredder can be stopped and the feeder reversed so the operator can then wand the material to find the metal is stupid. Theres no reason you can either create a non ferrous passage, or utilize xrays, or other options where any metal will stop the feed and alert the operator. Hell, the first couple times it alarms it will have paid for its self. Oh an you might want to consider editing out the idiot with the cigarette dangling from his mouth yelling "Rebar!" Great company image, probably the founder!

[@bodders1029]

there will be a reason. those blades are only a fiver and takes about 30mins to do whats hes just done. i have a very similar Jenz machine myself. on a forage harvester the area before the knifes is stainless steel. i wouldn't want my machine stopping for a nail if it did it would be creating exactly what you are trying outline above. just a thought

[@blondewoman1]

Scott you are right, you are naive and ignorant

[@henrikaki5883]

Steel is really not that big of an issue. I mean most of the time you hit rocks or any kind of unclean wood, which the metal detector cant get anyway.

[@Jimo225]

i been saying the same thing for years. These guys will spend a half mil on a machine but wont' spend an extra 20,000 for some sort of metal prevention.

[@blondewoman1]

Une barre à mine se cachait parmis les bouts de bois.

[@MrJeff832000]

BBBBZzzzzzzzzzzzzzzzzzzzz in he goes lol

[@zorantesic]

ach du scheise....🤮😪🤮