Wood Spirit Power Wood Carving

kutzall.com/?aff=37
USE CODE: CARVINGAS to save 5% on burs and disks
Extreme bit: kutzall.com/collections/burrs...
Taper-burr: kutzall.com/collections/burrs...
Taper-burr: kutzall.com/collections/burrs...
Taper-burr: kutzall.com/collections/burrs...
Sphere-burr: kutzall.com/collections/burrs...
Cylinder-burr: kutzall.com/collections/burrs...
BenQ LED Desk Lamp with Swing Arm: amzn.to/2NwLySP
Diamond bit set https: amzn.to/3fy4USn
amzn.to/2WXwMZS
Rz Dust mask:kutzall.com/collections/gear/...
Keyless Chuck for Dremel: amzn.to/3Cekj45
Dremel Flex Shaft amzn.to/2DmcFKQ
Dremel 3000: amzn.to/357n5tW
Dremel 4000: amzn.to/3rXpgZS
Foredom tx: amzn.to/3bxVMdh
Foredom Speed controll: amzn.to/2GnaPLl
Handpiece, No.28, Tapered, w/ 1/8in. & 3/32in. Collets - H-28: amzn.to/3qKmAOI
Central Machinery 2 HP Industrial 5 Micron Dust Collector: amzn.to/2DwfRnT
Dremel High Speed Steel Cutter : amzn.to/3veVSQE
Carbide Burr Set : amzn.to/38bqPfm
Abrasive 4 Roll Multi Pack : amzn.to/3b7EoxL
Painting Brushes, 20pcs : amzn.to/392Zb32
Watco Rust-Oleum Danish Oil Wood Finish: amzn.to/35gWY2J
Watco Danish Oil Wood Finish Black Walnut: amzn.to/38lQK3S
Undrilled Imitated Pearl Acrylic Beads: amzn.to/3s2Iopk
Minwax Tung Oil: amzn.to/3tuq2OY
Rit DyeMore Liquid Dye, Racing Red: amzn.to/3rVDuKb
Colwood Woodburner: amzn.to/2P3EhXU
#CarvingandSuch
Wood: Cedar
If You Like To Support My Channel. 👇
www.paypal.com/donate?busines...

[@lauriemcconnell4172]

Really nice wood spirit. I do like the way you create the nose. Very lifelike. Thank you!

[@Soupcan13]

Super cool! Nice music selection to go along with your work 😊

[@carvingandsuch]

Soupcan13 Thanks 👍

[@budirwin9825]

Agree

[@ianwood8223]

I haven’t seen a bad carving yet,keep up the good work from Ian in the Uk

[@diydarkmatter]

turned out real nice buddy like it alot . did a great job with the detail with them big ole bits . holy man . i use little itty bitty bits to get that detail . i really dint think you was going to get that kinda detail . great job .

[@carvingandsuch]

diy dark matter Thank you sir appreciate it.👍

[@diydarkmatter]

@@carvingandsuch no problem buddy you really do have a lot of talent . i know how much time these wood carvings take even with a power carver . hand carving them takes a little longer ive done both i prefer the power carver . but you do have to be more careful .

[@dwardo6160]

Awesome sprit !

[@carvingandsuch]

Thank’s

[@georged7680]

So nice , thank you

[@carvingandsuch]

Thank you

[@lenhowl]

Dandy, well done. Just subbed, cheers from Newfoundland

[@carvingandsuch]

Len Howl Hello from Florida 👋

[@wood4nothing284]

Excellent work that turned out great. Cheers Tim from Wood4nothing

[@carvingandsuch]

wood 4 nothing Thanks a lot Tim. Any projects you working on? 👍

[@wood4nothing284]

@@carvingandsuch Hi not at moment I'm without a workshop at moment but need to get back into it it's been a while since I've been on youtube and I need to get sorted. Cheers Tim from wood4nothing

[@efrenleon4313]

Excelente su trabajo felicidades

[@jrmynewcomer]

Ide love to know what rotary tips you are using if you could list in desciption. Really nice carving!!

[@tittyrino]

Kutzall has the bits.Flame bur for most of the work then detail it out.I make 3 foot oak,cherry and poplar log carvings.

[@carvinlambert6899]

very nice, to look real, is to be a good Carver.

[@carvingandsuch]

Thank You

[@jefflien2599]

Awesomeness!!!

[@carvingandsuch]

Thank you

[@almacendavinci8768]

Mucho talento, felicitaciones Un abrazo desde Colombia

[@carvingandsuch]

ALMACEN DAVINCI hello from Florida 👋

[@ThaiRoosters2019]

Thanks a lot sir❤👏 Can you make a detailed video regarding tools? And where to get?🙏

[@carvingandsuch]

I use dremel 3000 and 4000 Plus i have a foredom tx for heavy work. Also all the links to the bits in the description. Hope this helps How I Use My Favorite Bits with Dremel kzbin.info/www/bejne/qmOvnZyneNiMiKM

[@humorinpolitics56]

Looks great. Fantastic craftsmanship. I used my dremel to make a handful of carvings but went back to my knives. People weren't as interested in them when I told them which ones were carved with a dremel and which ones I carved with a knife. The ones I sold, people would pay 3 times the price if it was carved with knives and chisels.

[@Wingman115]

Very nice.

[@carvingandsuch]

Wingman115 Thank You

[@williamkaiser8490]

I nick name him The mad carver!✌👍👍

[@alfioingiulla122]

Complimenti sei molto bravo

[@michaelrioux7696]

very nice tanks for sharing ;)

[@carvingandsuch]

Michael Rioux Welcome 👍

[@jkraft2652]

What is the background music ??? Nice vid !!!

[@glenmckelvey5952]

Nice one subscriber .

[@carvingandsuch]

Thank You

[@ideamakerdominik4355]

Your super good video

[@carvingandsuch]

idea maker Dominik Köszönöm 😉

[@AutodidactEngineer]

I find it very hard to do the eyes also, I leave them hollow just like you did🙂

[@carvingandsuch]

I like to do eyes but sometimes I just live it like that 😉

[@davideilers3176]

I’m curious as to which bits you use for the detailing in the hair and eyes? They look like something I have but I’m not sure. As usual, any help that you can give is greatly appreciated. Thank you so much

[@carvingandsuch]

I think that’s a diamond bit tear drop shaped. That’s in that set what you can find in the description. I using that all the time 😃 hope this helped

[@davideilers3176]

Thank you. It helps a lot!!

[@pabitramohangayan1482]

Finger itself tapped on like button.

[@carvingandsuch]

Pabitra Mohan Gayan Thanks a lot 👍👋

[@jayc3110]

Nice Video and a fine little wood spirit... But you don't say what wood species this was! - Also it would be useful to know the 'specific' Kutzall bits / burrs you used on the Dremel.- And the final finish coat you used... If you could link them it would be nice to learn. Thanks!

[@carvingandsuch]

Jay C Hi the wood i was using is eastern red cedar, and i see you find the video of the bits i using 👍

[@rowerylezajsk4875]

great job. what kind of drill, cutter is it?

[@carvingandsuch]

Foredom and Dremel and mostly Kutzall bits

[@user-dee123]

Like 👍👍👍

[@susanolson3611]

🙂

[@carvinlambert6899]

Nice job bro. Subscribing now.

[@carvingandsuch]

Carvin Lambert 👍

[@WillPreston3D]

how are you staining the wood after carving?

[@carvingandsuch]

I use a small brush and tung oil mostly.

[@zannolin]

What type of wood is that?

[@carvingandsuch]

Eastern red cedar

[@user-qk1su5yx9s]

مغربي مر من هنا 🇲🇦🇲🇦🇲🇦🇲🇦🇲🇦🇲🇦

[@londs2k]

cottonwood root?

[@carvingandsuch]

londs2k Cedar branch 👍

[@londs2k]

@@carvingandsuch Nice!!!

[@danyferreira325]

Que tipo de madeira vc usa?...pode ser qualquer micro retifica pra fazer??

[@carvingandsuch]

Hi this one i believe is eastern red cedar

[@tlnewnham]

but then you miss out on the nice sounds of shaved wood when traditionally carving :(

[@carvingandsuch]

Not really because I do both 😉😂