Wood Turning a Big Vase

[@suzetteedwards7956]

Beautiful wood. Love the vase. What kind of wood is it? How thick is your base? I'm wondering if it will crack when drying.

[@CookWoodworks]

Thanks Suzette! It jacaranda. I have a big stash drying now haha. The base was maybe 3/4" thick, and very surprisingly it hasn't cracked in the 2 weeks since I made it

[@makelikeatree1696]

Cook Woodworks - not familiar with that kind of wood. It looks like alabaster. Quite lovely.

[@JericRoblox]

@@CookWoodworks I love wood turnings. I want to be a professional like you!

[@matthewkelly-barnett4480]

@@CookWoodworks I want to get into wood turning but I don't know watch lathe to buy what would you recommend and what wood do you recommend and where would I get the chisel for woodturning

[@rudinakapexhiu6784]

@@matthewkelly-barnett4480 tr

[@ritalowrie1296]

Beautiful vase. My brother who is a carpenter, uses jacaranda quite a lot for furniture. It’s a beautiful wood 👏👏👏

[@seanthompson6720]

It's really cool how you can actually see the wood changing colors from oxidizing as you cut it.

[@CookWoodworks]

Yeah I was a little mesmerized a few times in the middle of turning it haha

[@1Igster1]

Sean, it's not oxidizing... it's drying.

[@egparis18]

That's a beautiful outline you gave to your vase and the grain's gorgeous. Thank you very much for sharing.

[@CookWoodworks]

Thank you!

[@Noone-hk1vf]

All those wood chippings and dust spewing out is almost just as satisfying as the wood cutting to me haha

[@imimpostor3225]

This woodworking is so satisfying! I love woodworking so much!♡

[@mmills7012]

Beautiful wood and graceful vase. Nice

[@Secondlifeofwoodturning]

Looks like antique vase. Good job Drew and nice practice with bowl gouge 👍

[@Idahoborn66]

Thanks for throwing in some parts that were not sped up!

[@fionam3554]

When you do a log... I worry about the pith ... did it stay intact and not crack as you dried? I do like the wood too.

[@denislavdochev3783]

Looks like the surface of Jupiter. I would leave the bottom that you cut in the end but it is not a big deal. Very precise work, though. I like it.

[@CookWoodworks]

Thanks very much

[@mouradaldow3997]

That smells so good

[@SiamWoodShop]

Nice work, turned out great, cheers John

[@CookWoodworks]

Thanks John!

[@DennisDolan-fl3mw]

Looks real top heavy

[@SilverBack.]

Great first try 👍👍👍👍

[@GRIZZ357]

Came out, sweet Lil brother.

[@johnmalan6802]

Is that a green log? If so how do you keep it from cracking after it is turned? Thanks

[@mountainviewturning5319]

Great looking vase

[@jamiesorensen7575]

Jupiter Vase. Awesome stuff.

[@Secondlifeofwoodturning]

I thought the same about jupiter 😁👍

[@CruzesLouisianaOutdoors]

Another great project buddy....looks awesome! Have a great weekend

[@CruzesLouisianaOutdoors]

I see the KZbin safety police are on your case 😝

[@stuartb9323]

Watching you do this is so relaxing. You make it look so easy, but I'm sure you have a lot of experience under your belt. Just curious, how much do these pieces sell for? Do you have an online store? So impressive....stay well

[@CookWoodworks]

Thanks for the kinds words! I do have an Etsy shop: etsy.me/2y07CO6

[@romankolar4676]

Krásná práce

[@marcelrey9533]

Like the unusual colour, looks like marble. 👍🏼

[@donaldtrabeaux1305]

Stunning vase

[@jf6720]

I love turning green wood, I could almost smell it :)

[@xandervanijzendoorn]

Beatiful!!

[@JonasDieltiens]

What tool do you use for hollowing? And please let us know how it dries, with that pith in the middle! :D

[@CookWoodworks]

This is the tool I use: amzn.to/2SMDnl6 I made this vase about 2 weeks ago, and shockingly there have been no cracks. I totally assumed it would

[@zachariah-binyisrayl5570]

You're not big on conversation are u ??? LOL I understand...u let the craftsmanship do all the talking. I can dig that. OUTSTANDING work !!

[@mitchgingrich2619]

Looks great btw

[@AllenOxendine]

Thanks for sharing, nice Piece. Full View and Like

[@CookWoodworks]

Thank you!

[@nycdotguy]

Good Job 👍👍👍

[@gaylewilliams7353]

Great video! You got good fast with that gouge!!! I need lots more practice. Good job!!!

[@CookWoodworks]

Thanks Gayle! I still make plenty of mistakes, but the practice does help

[@damarcastro768]

Muito bom seu trabalho abraço fique com deus que abençoa

[@mohmmadjadugar1111]

good job

[@Mark-xs6uz]

I love the big vase. I went to Workbench this week and got motivated. I am ready to buy my first lathe. Do you have any suggestion on which brand or size to purchase? Thanks, Mark

[@CookWoodworks]

Mine is a Jet, and it's a good combo of quality and affordability. I'd start with a medium size lathe. A mini lathe is too small, and I'd only get a full size if you've tried it a few times and know for sure it's a long term hobby. But it's impossible not to get hooked!

[@michaeljasmin6630]

I own a nova comet II and love it the combo kit is a good value, but you'll want/need to buy more chisels shortly after.

[@jayelwin]

I really like my 70-1420 Rikon. It’s a little bigger than midi.

[@stevenjobbins2600]

Looks cool Drew you and that bowl gouge seem to have made friends

[@negicraft7700]

Amazing 👌👌👌👍 great job

[@huh3427]

*splinters have entered the chat*

[@CookWoodworks]

🤣🤣🤣

[@joshblumenthal4873]

Nicely proportioned piece. What are the overall height & width?

[@KLLRWLF-bx5rw]

Can you do other materials like plastic or sommin, that would be cool!

[@uniqko]

Nice vase....

[@Vin_projectt]

Nice brother👍

[@zackb6045]

Are you a wizard?

[@bhimpapu]

I wonder if you can help someone in Nepal who uses their legs to roll the wood to make vase. Can you please share what kinds of motor and equipment needed to roll the vase?

[@frankiearmstrong2777]

Very nice!

[@CookWoodworks]

Thanks!

Dạ cho em hỏi gỗ đó gỗ gì mà thấy tiện mềm vậy

[@vik_body_beld7294]

All that saw dust , what is used for? Does it go to waste? Hope they don't pack it and sell it as kous kous.

[@wolfgangmetcalf9557]

Why did you cut off the bottom at the end? I thought it looked nice with the foot attached

[@klienianlibrando2817]

Satisfying

[@WOODTURNINGBYBRANDSTRUP]

Great looking vase :-)

[@asepyuliansyah9610]

Can i know how you can made it ? Because i really want to learning about wood ... with college in university or from what you can do that ? Please share ... thankyou

[@farookqureshi893]

nice

[@farookqureshi893]

👌👌👌👌👌

[@kc696969]

Show us what it looked like one week later after it dried out.

[@СарварШодиев-л3д]

Вот ты дойош мужик. Классно спасибо за видео

[@hasinibolli3407]

It's satisifying

[@mpart_woodlathe-stuff]

Nice practice piece Drew. Your gouge work looks ready for the big time👍 The shape is pretty too🎨 Thanks for showing to us🙏 -Mike So how did you make the self-adjusting tool rest seen at 1:40 ? Gotta get me one too 😁

[@CookWoodworks]

It's a long process to make that tool rest, but the final step is called "Don't tighten." 🤣

[@mpart_woodlathe-stuff]

@@CookWoodworks gotcha 😁😁😁

[@alcinolima2776]

Belo trabalho friend.

[@Ургеня]

Ну почему не оставить ту часть, которую обрезал. Ведь устойчивость вазы была бы лучше, да и вид, по мне лучше. Лайк.

[@snipera1314]

I have experience in this business and I hope to have a machine like this one 😓

[@waynehillmannakapenncrafte9587]

What did you use for a finish?? The vase looks GREAT

[@CookWoodworks]

This one I used danish oil, thanks for watching!

[@arcarc7229]

What tool did you use to core the vase

[@tomasdufka389]

Very good work What kind of wood is it ? Sycamore ? Maple ?

[@CookWoodworks]

It's called jacaranda

[@zackb6045]

How’s you get that chuck to hold that vase without the tail stock? My G3 was notorious for letting it go.

[@CookWoodworks]

Yeah I have a few videos where that happens haha. Now I’m very slow and delicate hollowing vases

[@andreahansile8904]

That just look like jupiter 9:40

[@romlirido6238]

God is coming

[@lucylola138]

What size forsner bit is that?

[@evasusanti8474]

Like a jupiter

[@fighter3120]

Очень круто👍

[@caintfindme4735]

Little late to ask but what brand lathe you have?

[@CC-gv6us]

looks like my Jet 1221SP

[@sethbrettell5952]

What lathe speed do you run whilst using forstner drill bits

[@CookWoodworks]

As slow as my lathe goes, 320 I think

[@palestineViper]

what is the name of this machine?

[@Jook11785]

Waow

[@serhatozkan2315]

Jüpiter ??

[@maverikfulfer2601]

why are is one nail painted, 5:28

[@Nuhzar]

Красиво, но только дно неустойчивое.

[@hoowarkhiro3237]

Thats easy

[@soltanmyradow8736]

👍

[@عابد-ر8ص]

😍😍😍😍😍😍😍

[@jurgenei8702]

The base looks very small.....it's a tumble vase.....

[@ЕвгенийГрищенко-я4к]

Кто Русский лайк

[@wonderfularjosari1093]

Generasi +62 mana suaranya😂

[@shreyas4142]

Is this a satisfying video

[@agudecar]

why so many steps

[@suzanneaufang4976]

Besides the real fact the base is far too small for its size!!!!!

[@sarathecat7163]

!!! Прелесть)

[@user-pd8zb5ul2g]

광고제거 10:43

[@harrypapageorge9735]

You are a good person to me I am not a good friend and a person I am not even sure that I can do this to myself you just want me to be a good person and I am not sure that the app does it to be

[@mhmdhdadi9086]

لا

[@prof.swapnilwakadevideo8085]

I won't learn this

[@diditganteng3674]

My name

[@خسرو-ط1ز]

یه تنه درخت نابود کرد یه گلدان فسقلی ساخت

[@amoopooya2671]

این کاره نبود طرف اخرش هم کلا لق میزد از همون اولم بد بست

[@youngdrastictheb4119]

[@JericRoblox]

Sorry. But my ear is hurting after seeing the video, the sound was too loud. Needs improvement but the video was still good. Like it 👍

[@donotcheckmychannel5110]

Aww some broda Sub from me❤

[@НесторМахно-б9с]

Неустойчивый.

[@عبوسيحومدي]

تنل🦓🦓🦓🦓🦓🦓🦓🦓🦓

[@JelajahTani]

Not excellent

[@mitchgingrich2619]

Your so unsafe. You need to be more safe. Why can’t you be safer. Safety is important. Safe safe safe safe safe!!!!

[@suzanneaufang4976]

Why must you waste so much wood?????

[@CookWoodworks]

I didn't