Thanks for the tour and the advice on whether a plane is really needed helps in planning. Being retired I have to watch pennies and make the most with my money
@gregsarsons12213 жыл бұрын
James you are a brave man. I would never admit to my wife I don’t really need all the planes I have lol 😂
@chadjazeera99603 жыл бұрын
My first thought was "I hope my family doesn't see this..." 😬
@James_T_Kirk_17013 жыл бұрын
Lmao. This is so true.
@robertdavis1715 ай бұрын
Excellent video. This explains to me how to choose a plane. I never had heard of a compass plane. I'd like to see how they work.
@jerrystark35873 жыл бұрын
Nice review. Thank you. A plane is not a vise, but planes can be vices. 😎
@michaelmcdermott2178 Жыл бұрын
Enjoyed spending the morning with you.
@jbtallullah70097 ай бұрын
5 1/4" is awesome if you plane lower grade lumber. Never considered it until i had to plane a ton of 2 common white oak. You can maneuver around knots much better than a 5 or 5 1/2"
@Humbik3 жыл бұрын
I’m looking forward to the file video!
@stufarnham3 жыл бұрын
I love my 5 1/2.I was recently given a Dunlap #3. Dunlap was sear’s second string plane brand, and this one look like it was probably made by Stanley. I did a fair amount of work getting machining marks off of the mating surfaces. It lacks a frog adjusting screw, but that’s not a big deal as I keep it set up as a smoother. Right no I am in love with this plane. It is light in the hand and a joy to use. There are times I want the additional width of my number 4 but at the moment it is a joy to use. My 5 1/2 is a Stanley made Kleen Kutter, also a great user and a fine choice for a shooting board. If you a liking for a good user plane and not afraid to do a little work these rebranded planes can be a great value.
@robinalexander57723 жыл бұрын
Nothing like a hand plane fetish. I Know I have one. lol cheers from Tasmania
@JamesSmith-su3oz3 жыл бұрын
James, Starting by no. #3, I have found it to be a starter block plane and a smother. #4 I have 3, one is setup for scrube work. #5,#5 1/4, 5 1/2. All still need work but the 5 is a keen kuter K5. #6 is my shooting bord only. #8 my fave. It makes smothing withe a #4 easy. Most of my planes are sargent brand or made by sargent for craftman, trustworthy, etc. Cheepest one so far was for $10.
@andyhastings59502 жыл бұрын
I use my number 8 for large panels. But the one use I really to use it for in on my shooting board. Sure it takes extra effort to get moving, then it slides right through end grain.
@tonyborzumato85102 жыл бұрын
Hi James. I'd always wondered what use you have for such an extensive plane collection. After watching this video, it makes sense, and, (with the exception of the Veritas) most of the planes you actually like and use are also in my collection. I just got a new Sweetheart low angle jack and I too am impressed, especially given its reasonable price. I also really like my 71 and 45. I'm a little surprised you don't have a 112; it's great for figured or wacky-grained work. I also added a low angle block plane to complement my dad's old 9-1/4. (my #5, type 12 was also his). My #4 is a type 17 (WWII vintage, w/ bakelite depth adjustment knob) set up for smoothing, and it really shines at that task. Anyway, thanks for the walk through of your collection. Great stuff.
@petewollman5502 жыл бұрын
Very interesting video, I always learn something new, I love your down to earth approach on things, also your quick to the point ,and no nonsense opinions. Thanks 😊
@davidwood37513 жыл бұрын
Great video. I really enjoy using my mew luban no 6 for removing a ton of stock quickly I already had a no 4 and wanted a larger plane and felt the 6 was a nice compromise between the 5 and the 7.
@vasky22 Жыл бұрын
I know this is a year old, but would love to hear your thoughts on skewed planes, like the 140, the 46, 289, etc. What they are for, why you may need one, or why you don't and what you use in lieu of one.
@WoodByWrightHowTo Жыл бұрын
they are great when making rabbits as the skew pulls the plane to the side keeping it tight to the wall. they can also lower the affective angle o the cut which is why a lot of shooting board planes use them for end grain.
@BWreSlippySlope2 жыл бұрын
Wow, I eventually was able to quit the Plane buying addition but got up to about 1/2 of what you got, but do have a combination plane. That shows real dedication.
@mrwashburn19643 жыл бұрын
Great video - thanks James. I find myself using my 5 1/4 a lot, though, even more so than my 5. Not sure if it’s b/c it’s the first Stanley I got, or because it’s a smooth bottom and my 5 is corrugated. Other than the tote being a little small for my hand, I like the feel and the lower weight. And being more narrow, it tears through the grain easily (I put a decent camber on it). I’m tempted, though, to take most of the camber out of my 5 (it has about the same amount as the 5 1/4, so it’s somewhat superfluous) and start using it more like the jack it’s supposed to be.
@MattKnowsThat10 ай бұрын
Coulda shoulda mentioned why your planes are painted blue. Think you mentioned it in a previous video but I’ve forgotten.
@WoodByWrightHowTo10 ай бұрын
Here you go. kzbin.infoZkLW-FWjGAg?si=O7-2rBQo9dgtCqmp
@justplanebob1053 жыл бұрын
This was a fun video. Now that I am healing up, I'm looking forward to making some curls this weekend just for fun. It's been 9 weeks. Whew! I have my Grandpa's Stanley No. 18 Type 1 that still works great. However I wish I could find some new or original rivets that hold the cap iron lock together. :)
@upsidedowndog12563 жыл бұрын
Very cool collection and display rack! I am now inspired to build my own rack!
@kent54003 жыл бұрын
I haven't regretted buying any of my planes, even the losers of the bunch. They've all helped me to learn what features I prefer and which ones don't work well for me. For example, I prefer the depth adjusters of Stanley 60 1/2 block planes to the ones on the 9 1/2s. I also find the size and weight of the 60 1/2 feels better for me. Some of the specialty planes have taught me which ones work well for me and which ones I could do without. Others are just exceptionally good in their niche, and I'll use them whenever I have the place for that. I also don't mind having more than one of any given size. For example, I have several #4 and #5 size planes all set up differently: course cut, fine smoother, lots of camber, etc. The hard part is to thin the herd once you've found what works well for you, and hence the collection grows... As I'm approaching 50 planes the rate of growth has slowed down.
@jerrygillette8543 жыл бұрын
Hello, James. Another very informative video. I use my 100 year old Stanley No. 6 as my main shooting plane. It works great for most applications. The weight is just right to power thru medium to large pieces. Maybe someday, I'll luck into a No. 500 shooter.
@JamesSmith-su3oz3 жыл бұрын
Yes, sombody ealse who found out a no. 6 is the best shouting bord plane.
@davidozab27532 жыл бұрын
I want to try mine as a shooting plane. Need to make a shooting board first 😄
@razerface353 жыл бұрын
its awesome to hear such high praise of the Lee Valley Custom planes. i currently have the standard config #5 on back order and cant wait to get my hands on it. Feels good to buy and use high quality tools made in Canada. if the #5 is as good as i hope, the #4 will be my next buy!
@steh8217 Жыл бұрын
Dont know of ive missed it, but id love to see you repair the crack on the 10 1/2. Im just about to my first repair... wish me luck 👍🤞
@WoodByWrightHowTo Жыл бұрын
I haven't yet gotten up the courage to fix that one. Brazing is not an easy thing to do.
@carsonwells17859 ай бұрын
Noting that your Veritas custom is your favorite plane, what are your feelings, opinions etc. regarding the PMV-11 iron. I have that iron in my shooting plane and have never experienced such an incredibly sharp and durable edge as that one. And one more question. What is the purpose of recommended use of the cam on the Stanley 45s and 55s. I have both and use them infrequently. I want to change that. Love your show. Keep em comin'.
@WoodByWrightHowTo9 ай бұрын
PMV11 is one of the best steels out there. I have a few tests showing it's durability if you want to compare it to others. The cam on the 45 I'd to hold up the rails near the fence when cutting deep onto a board so that the cutter does not go in at an angle. It is very fairly used. I have only used it once.
@peterwilliams89223 жыл бұрын
5 1/4, well I've never heard of one of those, certainly not seen one here in the UK. I watched a Rex video recently where he said Stanley made 11 planes, I got 1 - 8 plus 4 1/2 & 5 1/2 but that was it, so the 5 1/4 must be the elusive beast he was talking about? Thanks for this video, it has been very educational and aspirational, I've never seen a No 8 over here either, but it's on my 'want' list and I even made a place for one on my till - another thing you inspired me to make. Don't think you're showing off, use your Veritas, it's your trade and I imagine we're mostly hobbyists watching. It's always good to aspire to something,
@-Benedict3 жыл бұрын
Interesting to see. We're all different, as you say. I'm really skinny, so I like lighter planes first and foremost. No. 3 rather than a No. 4 for smoothing, for example. My very favourite plane in terms of sheer enjoyment is my Record 044 plough plane. Only use it sometimes, for drawer bottoms and suchlike, but it's a joy in the hands.
@josephhaddakin70953 жыл бұрын
Good call because 3's are a lot cheaper than 4's & 4½'s.
@whittysworkshop9823 жыл бұрын
My favourite is an old Marples MA44, same as the Record. Theres somethin extremely enjoyable about ploughing grooves 😁
@robohippy Жыл бұрын
I do like the nose/toe or heel clips you made for your hand planes. Just starting to make my plane till. More planning ahead.
@kreech683 жыл бұрын
GREAT video! What is part of your "collection" (and video backdrop, and fodder for how-to-use videos), and what do you actually USE when you build stuff (i.e., we see you using the Lee Valley in some of your actual "build" videos, like the new oak shelf videos).
@ElijahAtchley2 жыл бұрын
I have a 4, 4 1/2 and a 5 1/2 and I do EVERYTHING with those. Wish I had a larger selection.
@rojerjula5824 Жыл бұрын
I have 3 planes that I frequently use; a #5, a low angle block and a Japanese Kanna (wooden block). #5 is an all around for most situations while the low angle is for small portion of parts. The Kanna is perfect for fine shaving. Do I really need more planes? Perhaps some specialty plane like rebate plane or router plane would be nice.
@alvinmacbrien65005 ай бұрын
😊😊
@alvinmacbrien65005 ай бұрын
😊😊😊
@ryanallthewiser3 жыл бұрын
Great overview of your planes ! Love your collection. When will Sarah make her own plane till?
@WoodByWrightHowTo3 жыл бұрын
what are you talking about? this is her plane till!
@MCsCreations3 жыл бұрын
Awesome, James! Thanks a lot! 😃 Well... You didn't talk about planes used with shooting boards, so... Is there coming a video about it? 🤔 Anyway, stay safe there with your family! 🖖😊
@WoodByWrightHowTo3 жыл бұрын
Ya that was one Missed oops. But I had a dedicated video on the Stanley 51.
@HomesteadingNorthernMichigan3 жыл бұрын
Oh yeah... This topic is right up my alley 😆😆😆
@WoodByWrightHowTo3 жыл бұрын
And once more congrats on first!
@HomesteadingNorthernMichigan3 жыл бұрын
I love my no 62sw but I pulled the front knob off... I am going to reach out to Stanley to see if they'll send me one
@peterides95683 жыл бұрын
What's with the blue strobe light over your bench? Great video Will, thanks. Sounds like. A 4, 5, and 7, 71, and a decent block plane will suit most people for most tasks.
@WoodByWrightHowTo3 жыл бұрын
The blue light is for superchats during lives. Sounds like a great list to me.
@frankbraun99729 ай бұрын
Love your content! But…. The blue on your planes, is like color painting historical fine furniture… oefff
@BladeforgerKLX3 жыл бұрын
That No 6 would be a good plane for your shooting board. Have you tried it? The support attachment on the No. 71 is cool! Mine didn't come with one of those. Thanks, again, for all of the videos!!!!! Love your two main youtube channels!!!
@WoodByWrightHowTo3 жыл бұрын
Ya I tried it for the shooting board but I prefer the 5.5 or the 4 for that.
@MrConminer3 жыл бұрын
Hey james, I've spotted the Ulmia Ott Mark on one of the tools, minute 13:25 under your cabinet spoke shaves, what is that tool? Thank you in advance
@WoodByWrightHowTo3 жыл бұрын
That is a card scraper burnisher they make. It works well but it is just not my style.
@michaelthompson58752 жыл бұрын
Hi James! I was glad to hear your opinion on the modern Stanley Sweetheart 62. I have one as well and could never understand why people seem so opposed. When its sharp it works well and its actually a great plane for a shooting board. Question: I've never given Veritas bench planes much consideration because I don't care much for the Sweetheart Norris adjuster as well as the Bailey style adjuster. Is the Veritas similar? I'd hate to not consider them because of an assumption. Great overview thanks!
@WoodByWrightHowTo2 жыл бұрын
I personally love the Norris adjusters on the Veritas custom plans.
@michaelthompson58752 жыл бұрын
@@WoodByWrightHowTo Thank you James I appreciate the response! Merry Christmas to you and your family!
@anpr53093 жыл бұрын
Would like to see some shows on using molding planes.
@gregchannell19833 жыл бұрын
Check out Stavros Gakos channel. He makes and uses all his own planes. Pretty cool channel.
@jway55803 жыл бұрын
Informative as always. Don't you have a Stanley 78?
@WoodByWrightHowTo3 жыл бұрын
I have the miller falls version. It is up on the shelf next to the shoulder plane.
@robertberger86429 ай бұрын
Great info!
@Anilm33 жыл бұрын
Great video! So many planes... It would be great if you could make a video about making mouldings without moulding planes or a Stanley 55.
@WoodByWrightHowTo3 жыл бұрын
I actually have a few videos on that. I did a detailed live series a few years ago showing how to go about it.
@Anilm33 жыл бұрын
@@WoodByWrightHowTo Fantastic, I will have a look, thanks!!
@criswilson11403 жыл бұрын
Look up Woodwright's Shop on PBS. Episode number 449 or Season 33 episode 7 - Combination Planes. He compares the wood molding planes with the Stanley 45 and 55. Conclusion was that there was little difference, but he preferred a plane with a sole (or maybe soul!).
@jimcarroll10053 жыл бұрын
Thank you for the great video. Can you tell me what the Veritas plane actually is as I googled Veritas custom plane and got lots of versions
@WoodByWrightHowTo3 жыл бұрын
Here you go. www.leevalley.com/en-us/shop/tools/hand-tools/planes/bench/72531-veritas-custom-number-4-and-number-4-1-2-smooth-planes
@jimcarroll10053 жыл бұрын
@@WoodByWrightHowTo Thank you, looks like it will be a special order with our local supplier, as not one they normally stock
@James_T_Kirk_17013 жыл бұрын
I have to say I use my no 6 a good bit.
@bradleymack57193 жыл бұрын
Hey James, you said that you don’t use the 10 1/2 because you haven’t fixed the crack yet. I have a 605 Bedrock with a crack in that same region. How does one go about fixing this kind of fracture?
@WoodByWrightHowTo3 жыл бұрын
Brazing is the most common method. I think I want to show that here soon.
@timort22603 жыл бұрын
James might not be a fan of the #6 but it's the best plane for jointing if it's your biggest plane. Lol one day I hope to have a collection like james. I'm about 4% my way there! Would like to see a video on repairing a cracked plane.
@WoodByWrightHowTo3 жыл бұрын
So true. It's always best to use what you have.
@dpmeyer48673 жыл бұрын
Thank you
@drawlele3 жыл бұрын
For the wooden low angle jack, I think I watched the video of carving out the escapement about 30 times or more while I was making a wooden low angle block so I could do small end grain cheese boards. Very informative, I for one would like more videos like that, but I know it’s not gonna happen due to your metal plane preference
@WoodByWrightHowTo3 жыл бұрын
They are on my list, and I have made 8 or so in the past. But once you make one the rest are the same. It is just the langth of the wood you need.
@marcclarke012 жыл бұрын
Thanks!
@jimmcnett3 жыл бұрын
What is the Veritas Custom plane? I see a plane # 4 1/2 for $309. Is that what you are using?
@WoodByWrightHowTo3 жыл бұрын
Here you go. www.leevalley.com/en-us/shop/tools/hand-tools/planes/bench/72531-veritas-custom-number-4-and-number-4-1-2-smooth-planes
@HomesteadingNorthernMichigan3 жыл бұрын
Well sir I'd love to buy a WW scraper...
@jimpowell61022 жыл бұрын
I have a small shop, and try to minimize the number of tools that I keep. For bench planes I have a 4, 4-1/2, 5-1/2, LAJ, 6, and 7. I really like the big half planes, the weight and cut is just super satisfyingly. I bought my 6, before I got a 7, now with both of these I don't know that I have a use for the 6. Unless I can justify keeping it I will probably be looking for a new home for this one soon. If someone knows a good purpose for the 6, please let me know.
@dwainlambrigger37692 жыл бұрын
Jim, I think a really great use for a 6 is in a shooting plane. I see you have a LAJ, which, other than purpose made planes is probably the best for shooting work, but I loved my 6 as a shooter for a long time. Another use would be as a fore plane for panels. It is an efficient alternative to a 5 as the larger footprint and blade with are very useful Again, The length helps over a 5 1/2. It's all how you use it. I know I use the 6 alot simply because I think it needs to be loved. I like it because I WANT to like it. Good Luck!
@RaaghavWoodWorks3 жыл бұрын
Yaaayyyy awesome video!!!
@anpr53093 жыл бұрын
Would like to see hlw to set up and use a compass plane.
@WoodByWrightHowTo3 жыл бұрын
I actually have two videos on that. They are a lot of fun to play with.
@mickythreee46403 жыл бұрын
That custom veritas is a number 4 right?
@WoodByWrightHowTo3 жыл бұрын
Yes it is.
@tonyennis1787 Жыл бұрын
Paul Sellers uses a #4 almost exclusively, while Rob Cosman uses a #5 1/2 the most. Matter of taste, I think.
@WoodByWrightHowTo Жыл бұрын
Bingo.
@tonyennis1787 Жыл бұрын
I love my #8c
@robertlagrange63883 жыл бұрын
is blue your favorite color?
@WoodByWrightHowTo3 жыл бұрын
How did you know? Lol
@HomesteadingNorthernMichigan3 жыл бұрын
That veritas is awesome..I don't own any of Thier tools.... Yet lol
@skoomasteve61443 жыл бұрын
I just got the Veritas router plane... It's absolutely lovely.
@HomesteadingNorthernMichigan3 жыл бұрын
@@skoomasteve6144 very nice... I need a router plane still... I will get an early Stanley first I'm sure... I love my vintage tools... I love thinking about the projects they previously made and who used them... If only they could talk
@-Benedict3 жыл бұрын
The only Veritas tool I have is a wheel marking gauge. Like yourself, I love vintage tools first and foremost, but Veritas wheel gauges are just vastly superior to old fashioned gauges with a wooden stock and pin, in my admittedly subjective opinion.
@HomesteadingNorthernMichigan3 жыл бұрын
@@-Benedict I'll look into that... My marker is an old SW and I'm not a fan but it works 😆
@marksexton13402 жыл бұрын
Ok....how did you hang that big wooden plane in your till.... I almost bought one, but couldn't figure out how to hang it in the till... And yes I built your till...
@WoodByWrightHowTo2 жыл бұрын
Sorry. I'm not quite sure what you're asking. It is held on to the plane till the same way. All the other ones are. There's a cleat at the top that it locks into. If you want to send me pictures or specific question feel free to send me an email. I probably won't be able to see replies to this. jameswright@woodbywright.com
@jamesmhall2 жыл бұрын
You should make the 5 1/4 into a scrub.
@r.m.peters663610 ай бұрын
why did you not paint your the 5-1/4, 6 and 8 your now infamous blue?...
@WoodByWrightHowTo10 ай бұрын
They didn't need a full restoration. The ones that are painted blue or rusted and missing almost all the japaning
@kz.irudimen3 жыл бұрын
So .. if your grab your n°6, it means you should have a sharpening session instead ? ^^
@WoodByWrightHowTo3 жыл бұрын
At that point I should have had several. 😂
@thewalnutwoodworker61363 жыл бұрын
I will gladly accept those planes that you want to give away! :)
@lourias Жыл бұрын
Hand Tool Rescue can fix that #10... he can fix anything! Besides, y'all are buddies....
@toddbrightly84603 жыл бұрын
Honestly I had the varitas custom 4 and 7 planes, and I found them to be very fiddly to set up. Do t get me wrong they were definitely well done tools. I'm just not a fan of the Norris style adjuster. While I'm able to get the low angle smoother and jointer set up I wasn't able to have the same success with the custom planes. If I had to choose 3, I'd say my LN 4 1/2, 5 1/2, and 7. But I use my jack/scrub and 6 heavily for milling lumber, my 5 1/2 and 605 1/2 get by far the most use, my 605 1/5 is set up as one would be typically set, and 5 1/2 is set a little finer. But damn man don't go making one choose. That would leave out my 3,4 low angle smoother with a 40° blade and my low angle jointer out in the cold. Oh wait those are my kit for work. I do agree with the shoulder plane being a more machine based tool. I have had one for years but only recently have I started using it for work. I've had no need for it with being primarily a hand tool builder. Great video and glad to see how we all have different tool likes.
@josephhaddakin70953 жыл бұрын
They're ALL for show. You make videos. You use the show tools too.
@danielnilsson50803 жыл бұрын
You forgot your 51 shooting plane ;-)
@WoodByWrightHowTo3 жыл бұрын
I did. There were a few others That I keep on other places that I missed. Oh well.
@Craftsman198418 күн бұрын
Oh almost forgot to comment about the comment =)
@wolf98953 жыл бұрын
Ok stupid question what does the number actually refer to What is the difference between a 4 & 4.5 etc Again sorry if this is a stupid question Thank you
@thepigmeat95533 жыл бұрын
A no. 4 and no. 4.5 are the same length. the No. 4.5 is just wider than the No. 4
@WoodByWrightHowTo3 жыл бұрын
Here's a full video talking about the Stanley numbering system. kzbin.info/www/bejne/j4fZmGBqiZaGi8k
@jimmydesouza4375 Жыл бұрын
Why is the 5 and a quarter smaller than the 5's? That doesn't make sense.
@WoodByWrightHowTo Жыл бұрын
That's just the way Stanley decided to make it.
@martinmeasures66313 жыл бұрын
The only reason to have a 100 planes when one is so dull you have 99 more
@Tensquaremetreworkshop4 ай бұрын
'The knock-off spoke-shaves work just as well' - not when they are so badly made that the adjusting screws do not engage with the blade. Yes, really. But you are right about Stanleys - the latest ones are probably made in the same factory- the Stanley logo is a paper sticker. And quality control is cursory at best.
@sjlarue13 жыл бұрын
How To Make A Meteorologist?? :-D
@WoodByWrightHowTo3 жыл бұрын
I am glad someone saw that. Oops!
@sjlarue13 жыл бұрын
@@WoodByWrightHowTo The subtitles are one of the things that set you apart from other woodworking channels. They are always punny.😁
@Xgecko663 жыл бұрын
You need a Lie Neilson 102…..the best low angle block plane ever
@WoodByWrightHowTo3 жыл бұрын
Maybe some day.
@kennethnielsen38643 жыл бұрын
29th.
@janetcoursey67569 ай бұрын
What ? No #1?.
@WoodByWrightHowTo9 ай бұрын
Someday. Maybe after I win the lottery LOL
@catmeme79453 жыл бұрын
In reality, you just only need one smoother, one jack and one jointer,,, that's it.
@WoodByWrightHowTo3 жыл бұрын
Really all you need is a number four or number five and you can do it all with that. The rest of them just make it a little easier for you.
@criswilson11403 жыл бұрын
Blasphemy! I need more tools! :-)
@ericcommarato7727 Жыл бұрын
It appears you have snubbed Lie Nielsen...
@WoodByWrightHowTo Жыл бұрын
No, I just generally don't have the money. Most all of my planes are restored. Antiques with purchased for 5 to 10 bucks