WoodMizer LX250 Wide Slab Sawmill In Action - 55" wide cut

[@lenhilger1876]

That was fun to watch!

[@KnottHeadCustomSawingFabWorx]

Thanks Len, glad you enjoyed it! We have lots more to upload once we get them edited up! Stay tuned!

[@roberthamilton9730]

Now that’s a great machine. Looking forwards to what you can do with it.

[@KnottHeadCustomSawingFabWorx]

Thanks Robert! it's doing pretty good so far! More to come soon!!!

[@WorkshopatTheGardens]

nice saw... they seem to be working very well... wish the would add an additional bed option for longer logs. thanks for sharing.

[@KnottHeadCustomSawingFabWorx]

These machines can be made longer, ours is longer than it came 😎

[@anooseholay]

I have an lt40hd and I love it as well as Woodmizer. I know the LX250 would be exactly what I expect but I just can’t get beyond the price point. I feel like WM is taking advantage of people because of the strong slab market right now.

[@KnottHeadCustomSawingFabWorx]

in the grand scheme of things i really didn't think the price was all too bad for the LX250... Ours has paid for itself already and some!

[@jeffmc686]

Glad to hear it is working well!! I figure if the blade is sharp, it should do fine regardless of size. Thanks for the video.

[@KnottHeadCustomSawingFabWorx]

+J M Thank you and you are very welcome! 😁

[@BigNicky77]

Congrats on your new machine! That is really impressive

[@KnottHeadCustomSawingFabWorx]

+Nick Klaich Thanks Nick, it should be a nice addition to the line up we have here and the extra width should make things a little easier for us sometimes for sure 👍🏼

[@BlackDevill9]

Hey thanks for your video! Hows the tracking on the 250? Im presuming being so wide, does it dive more then normal mills thanks in advance!

[@robintaylor-mockingeemill8223]

very nice

[@KnottHeadCustomSawingFabWorx]

+Robin Taylor - Mockingee Mill Thanks Robin, seems like a pretty nice machine so far!

[@graysquirreltreeservice7299]

Putting mine together this week, what are the measurements on your skid logs u used for the bases??ty

[@KnottHeadCustomSawingFabWorx]

8"x14" timbers on the bottom, it was just some timbers we had laying around here at the mill 👍

[@ronaldplecker8776]

Are the feed motors on the lx 250 water proof

[@jeffmc686]

Looks nicely built!! Would you know how it performs on smaller logs? 16”-20” diameter??

[@KnottHeadCustomSawingFabWorx]

It has been working out well for us so far!!! as far as smaller logs go, it should work out just fine on smaller ones but we have not put anything on it under 36" or so, we have other mills we use for the smaller stuff...

[@graysquirreltreeservice7299]

Have beautiful big stuff being a arborist ,how do you like the New 250 should I buy one 😁

[@KnottHeadCustomSawingFabWorx]

+Gray squirrel tree service It’s a pretty decent machine! As for getting one for yourself, it would be hard to say what model is best for an individual, they all have their strong points and we have a few different mills with different intended purpose’s... If you have larger logs this 250 is definately good at slabbing them up! 👍🏼

[@حسانمتعب-ذ6ث]

كم طول المسافة بين العجلات

[@ronaldplecker8776]

Where are you located, I like to call someone, I have one, motors locked up after a rain and freeze

[@Logjam5]

Is this going to replace the lt15 wide? If so is it up for grabs?

[@KnottHeadCustomSawingFabWorx]

This did replace the LT15 Wide for us at this time, but we may end up with another LT15W in the future... Only time will tell...

[@almonjacob3496]

The LX250 is advertised as a "slab mill" does that mean it can't do conventional lumber production?

[@KnottHeadCustomSawingFabWorx]

I'm sure one could cut some dimensional lumber on it if needed much like an LT15, but we will not be using this mill for that purpose, we have other mills better suited for cutting dimensional 👍

[@graysquirreltreeservice7299]

I have a deposit on a 250 what do think of it so far

[@KnottHeadCustomSawingFabWorx]

The LX250 has been working out really well for us so far! we have logged in a quite a few hours with it so if you have specific questions about it let me know, I'm sure we can answer them for you! Just let me know, I'm always happy to help! What are you planning to mill mostly?

[@graysquirreltreeservice7299]

@@KnottHeadCustomSawingFabWorx big logs

[@MONNIEHOLT]

I like my LT-35 but! There is no way wide logs are possible with mine, you have an awesome machine

[@KnottHeadCustomSawingFabWorx]

Thanks Monnie, I bet big logs are a handful on your LT35... Hopefully this machine will be a nice addition to our LT40 Super and out Lucas mills... It definately seems to cut pretty good so far! stay tuned for more videos of this machine from us for sure...

[@shivamsharmasharma9197]

I want rate's of LT15,LT250,LT450 and all technical deatal

[@KnottHeadCustomSawingFabWorx]

+Shivam Sharma Sharma Your best bet for info on all the machines is to go to WoodMizers website...

[@rickmedlen5813]

Want to sell it?

[@KnottHeadCustomSawingFabWorx]

Want to sell what?

[@BlackDevill9]

Hey thanks for your video! Hows the tracking on the 250? Im presuming being so wide, does it dive more then normal mills thanks in advance!