Woodturning - 3D Patterned Plywood!

[@christineg8151]

Beautiful! I love the fact that you kept the edge of the patterned plywood, rather than levelling everything off.

[@JackMackWoodturning]

Thanks C, are you an art deco fan?

[@christineg8151]

@@JackMackWoodturning Absolutely!

[@Foofgoose]

sammeee

[@konradsiwiec6262]

😊​@@christineg8151

[@3DPDK]

The light refraction within the darker wood even before the gloss coating was applied makes it look like cat's eye quartz. Spectacular piece!

[@JackMackWoodturning]

This is called chatoyance. Thanks man. Art deco fan?

[@3DPDK]

@@JackMackWoodturning Not exclusively, some art deco can be gaudy but this is elegant and warm.

[@veneraberens2547]

THE BEST PART OF THESE KIND OF VIDEOS IS ACTUALLY GETTING TO SEE THE PROCESS 😃💚💯

[@JackMackWoodturning]

Thanks V. Art deco fan?

[@haroldmickle9909]

Very nice it is

[@frankbonura5710]

Gorgeous, the vase evokes Egyptian papyrus styles of the pharaohs. The wood speaks to you with clarity and you are a good listener.

[@OohMax]

This is magic to me.... take a straight line, set it into a cube, knock off the corners and, abracadabra!, the straight line becomes curved. Such a beautiful piece.

[@JackMackWoodturning]

Thanks Max. Much appreciated man 👍🏻😊

[@calvinwendland8373]

you should see the steps behind a Celtic knot, it just looks like intersecting x's with straight lines over the top before it is turned and the rounded pattern is revealed.

[@Linuxdirk]

The strength of wood glue never fails to amaze me!

[@patriciaitalia]

Watching this video was like being a kid again and trying not to tear into a Christmas present, but to slowly imagine what could be inside, peeling back the layers, and finally seeing that what was inside was better than anything I could have imagined, and knowing that I it was something I had always wanted. Thank you! That was wonderful!!!

[@mikekellyjcmo1]

Very nice piece!

[@Hal_T]

I don't know which I admire more, your patience or your creativity. But, without both, this beautiful piece would never have happened.

[@JackMackWoodturning]

Thanks H. Agreed. What breed of dog is that?

[@Hal_T]

@@JackMackWoodturning - I don't know. She came from the streets of Los Angeles. About 6 people who have seen her traveling around the country with me have commented that she looks like she is part Akita. In the picture she is about 10 months old (estimate). The morning after the picture she saw and played in her first snow in northern Arizona. She lived with rescue fosters from the estimated age of 5 months. I got her at 8 months. She is now an old lady of 9.5 years. Excellent friend.

[@JackMackWoodturning]

Nice looking dog man. We have been thinking of getting an Akita funnily enough. 😊👍🏻

[@Hal_T]

@@JackMackWoodturning - Have you seen the movie Hachi: A Dog's Tale? It is a 2009 American film that is an adaptation of a 1987 Japanese film. The original film told the true story of an Akita dog who lived in Japan in the 1920s. What the film demonstrates is the incredible loyalty of Akita dogs. en.m.wikipedia.org/wiki/Hachi:_A_Dog%27s_Tale en.m.wikipedia.org/wiki/Akita_(dog)

[@JackMackWoodturning]

Nice one man. I will most absolutely check it out. Much appreciated 😊👍🏻🙏

[@killeL9980]

Gabungan antara genius dan seniman sukses for you.......

[@simplelifelost]

I make something out of ply it’s a box screwed together. This is something made out of ply on a different level, stunningly beautiful.

[@JackMackWoodturning]

Thanks man. Will you give it a try?

[@terrywhite9017]

Good morning Jack, this is really something how the pattern turned out. 🎉🎉🎉

[@5thearth]

Honestly one of my favorite turned pieces I've ever seen.

[@JackMackWoodturning]

Thanks Ian. An art deco fan?

[@ralphgraler4223]

Wow... the combination of plywood and Sapalo is stunning... amazing!!! The pattern is breathtaking and the shape of the vase is great!!! 10 of 10!!! 🎩👍👍🇩🇪🔨

[@СветланаРябова-ф6ф]

Восхитительно! Все восхитительно с начала и до самого шедевра! Великолепное зрелище смотреть как из чурочек рождается такая красота, что просто глаз не оторвать! Вы кудесник!!! Спасибо за прекрасное видео!

[@woodturningvideo4180]

I like you assemble wood lath nice color

[@JackMackWoodturning]

Thanks man. Do you do a lot of carving?

[@kyleeames8229]

It’s beautiful! You’ve won my subscription. I sense a missed opportunity though: the pattern you made is an extrusion of a 2D pattern into 3 dimensions, resulting in the final form being bilaterally symmetrical. If you instead constructed a tessellating 3D pattern, you would create a beautiful, elaborate radially symmetrical design. The result is beautiful regardless.

[@JackMackWoodturning]

Kyle… I can’t wait to watch you construct this blank in a radial pattern.. you must be an absolute wizard at cutting compound angles on the table saw.. and I’d love to see you glue up techniques too.. send me a link to your channel.. Thanks for this kind words buddy.. I personally like the effects created by the side of the extruded 2D pattern as it rounds the edge of the piece. 👍🏻

[@Ondanatch]

@@JackMackWoodturning yo this reply was mad passive aggressive. He was giving you information that you could potentially use in the design process and evolution of this tech and you respond with -Cant wait to see you do it better. Weak Ego. Wack response.

[@arcadiagreen150]

@@Ondanatch x2

[@montauta]

@@JackMackWoodturning is easier said: "man i can't, could you teach me?". SMF.

[@beantea5592]

I'll take that advice and make something dope if he won't.

[@HotrodsnRock]

I have never made anything but I have watched a lot of turning videos and this is the coolest pattern yet.

[@JackMackWoodturning]

Thanks man. You a guitarist?

[@callmeneutrino7136]

I want it. And more, I want to make one! Amazing!!

[@danniellebrown8996]

The objects you make are so beautiful. You are incredibly patient and have an eye for detail.

[@JackMackWoodturning]

Thanks D. Many thanks. Art deco fan?

[@Son0565]

❤ oh wow .look at the grain of the wood ,,your a master jack .

[@JackMackWoodturning]

Blush 😆.. thank you. Would you have this piece in your home ?

[@Son0565]

@@JackMackWoodturning yes ,it’s beautiful jack ,, your talent is beyond words

[@JackMackWoodturning]

Thank you 😊

[@eriklarsen6131]

I have seen this video several times now, and every time I am so impressed by the precision you execute, how the pieces fit together perfectly. That is a kind of beauty in itself, apart from the end result, which also is beautiful.

[@JackMackWoodturning]

Thanks Eric. Would you like to see more art deco pieces?

[@eriklarsen6131]

@@JackMackWoodturning Yes, please, and I watch all of your videos.

[@stevesyncox9893]

Hey Jack, FANTASTIC!

[@MrHankster49]

Stunning. The construction, turning and finishing, A true piece of artwork. Thank you.

[@JackMackWoodturning]

Thanks Hank. Art Deco fan?

[@MrHankster49]

@@JackMackWoodturning Just someone that appreciates proper planning and execution resulting in beautiful art

[@Mad9977]

a legit piece of art 👍

[@JackMackWoodturning]

Thanks M. Did you take that moon image?

[@Mad9977]

@@JackMackWoodturning sorry for the late response, yes i took it from the balcony =)

[@Lee-qp6gf]

You're making turning plywood popular. Great idea, I wonder if you lost sleep on this one. Great turn, Lee

[@JackMackWoodturning]

😊👍🏻. Why would I loose sleep over it? I’ve got two little boys.. sleep is never a difficult state to reach 😆😆

[@cindyweiland3929]

you are a true craftsman my friend that looks amazing

[@beson5663]

Not sure what I've been looking at lately but it looks like something that could be forearm armor. Very beautiful.

[@JackMackWoodturning]

Ooh, I know what you mean. Like on a samurai’s armour?

[@beson5663]

Yes

[@lilmisstrixie]

I already thought it was a beautiful piece by the time you finished all the cutting and gluing, and each step after made it better and better. I love the shape of the rim, is almost tulip-like.

[@robynrider4657]

I am forever amazed at your ability! Absolutely stunning piece.

[@MusketeerGweneth]

You have some really steady hands. I would not be able to make straight perfect lines like that without a ruler or something. 😅

[@TheBuckStopsHere480]

Really one of the nicest of these layered wood projects I've seen. Very pretty. very well done sir.

[@JackMackWoodturning]

Thanks M. Art deco fan?

[@jesseomcdermott]

@@JackMackWoodturning It IS very Art Deco! It's one of my favorite art movements. Your creation is so beautiful and well crafted. 👏🏻👏🏻

[@rebeccaloader4111]

I cannot get over what you can do with wood!!

[@JackMackWoodturning]

😊 just wait till I start putting some effort into these things 😆

[@rebeccaloader4111]

@@JackMackWoodturning I can't wait!!!

[@JackMackWoodturning]

😉

[@davidbuchan2224]

WOW. So this makes me want to get into woodturning! The design of that thing and the optical illusions are just beautiful. I am going to jump on line and look for wood turning classes - this is so much more interesting than the usual 'bowls' I see at craft fairs - my mind is racing! Thank you so much.

[@JackMackWoodturning]

Thanks D. Always here if you have any questions! 😊👍🏻

[@davidbuchan2224]

@@JackMackWoodturning Just showed my son (22) he said 'that's sick'... which I think Is very high praise indeed! He then said 'can you make a guitar that looks like that?' I said no. 😆 So I have looked at woodturning courses here in London - an intro course is £190 a day - I'm going to book it! I'll show you my mind bending vase in about... 8 years? Have you ever thought of turning a guitar blank? Huge shallow elipse in profile then cut the guitar shape from it. Mix that with your geometric madness and I think you'd have a very valuable guitar on your hands? I am planning to make one but just out of birch play end grain as that dick Putin has made my bin of offcuts very valuable!!! Anyway, thanks for the reply Jack - I'm going to grab some beers and make my way through the rest of your portfolio.

[@will.scotnativeingreece]

Hi Jack, "Magnifique", getting better and better, the build up is super, new favourite....ooooooooft! Cheers Will.

[@JackMackWoodturning]

Merci Will. Are you still in Greece?

[@will.scotnativeingreece]

@@JackMackWoodturning Yes Jack still here but have a few viewings think the heatwave is putting them off😎

[@neilchisholm8376]

Utterly amazing. It has a very Art Deco vibe to it.

[@JackMackWoodturning]

Thanks Neil. Are you an art deco fan?

[@alocin110]

Wow! Beautiful Artistic Piece. But this is not for drinking Tea or Juice because the top is pointy. The pattern is amazingly striking. Thank you for sharing.

[@Maritza-z4j]

I love watching your work. Never ceases to amaze me

[@sandyrolandcloutier1512]

Artistry! Your creativity is incredible. I learn something new about turning with every one of your videos I watch. Thank you so much.

[@JackMackWoodturning]

Thanks. I’m glad I can teach you something 👍🏻

[@pablojavierfontana9735]

Hermoso trabajo!,felicitaciones!,gracias por compartirlo!.Saludos desde Argentina!🤗

[@stuarttanner9953]

Absolutely stunning. Most enjoyable to see it's creation. I could easily have one of those in my house. It would blend with the antiques and modern. Wonderful. Thanks for sharing. Stuart

[@JackMackWoodturning]

Hi S. An art deco fan then?

[@stuarttanner9953]

@@JackMackWoodturning indeed I am. I had a 20s car, I live in 30s house and enjoy many items from the period.

[@GianbrunoPirona]

Sei un artista. Complimenti per il bel disegno e per la tua abilità.

[@nirmalya28]

An unique blend of hard work and smart work. You're amazing

[@JackMackWoodturning]

Thanks for the kind words. Will you try this ?

[@mikenearing7775]

A larger, rainbow ply would be mind blowing. This was so rad to watch!

[@motog4-75]

Wow I'm lost for words this time. That is one truly beautiful piece of craftsmanship 👌👍 🌟🌟🌟🌟🌟

[@JackMackWoodturning]

Thanks Moto. Art deco fan?

[@motog4-75]

@@JackMackWoodturning not especially, it's just a really really nice piece you created there.

[@derektrips]

How do you even think of this stuff? Amazing!

[@OzarkArtsandCrafts]

A stunning piece of Art.

[@JackMackWoodturning]

Thanks D. Art deco fan?

[@barbannco]

another beautiful creation...you are so clever

[@JackMackWoodturning]

Thanks B. Art deco fan?

[@justjulee9135]

Who knew plywood could turn out so beautifully? Apparently you did lol. This is a lovely piece!

[@JackMackWoodturning]

Thanks J. Very much appreciated. Are you a fan of Art Deco pieces?

[@justjulee9135]

@@JackMackWoodturning I'm a fan of everything you do lol. My style is very eclectic.

[@DavidLindes]

I was going to ask almost the exact same question. :) What's wonderful to me is that it doesn't appear to have gotten spoiled by any voids. Just luck? High grade of plywood? Patched them off-camera? Anyway, very very cool... gorgeous, even. And I don't especially single out Art Deco, but stuff like this? Yeah, I'm a fan. :)

[@MetalPipeGamingOfficial]

Lathes are probs one of the most satisfying working tools, noice video!

[@JackMackWoodturning]

Thanks man. What does BOFN Stand for?

[@MetalPipeGamingOfficial]

@@JackMackWoodturning its short for breath of Fresh Nature

[@kingmatthewa]

Stunning! Another beautiful specimen.

[@JackMackWoodturning]

Cheers buddy.

[@bentleyparish1226]

That is a beautiful piece

[@younglamb4396]

Juat subbed. Seriously man. Absolutely amazing art.

[@JackMackWoodturning]

Thanks man. Are you an art deco fan?

[@younglamb4396]

@@JackMackWoodturning I just had to googled exactly what art deco is!!! LoL!!! I would say probably not particularly. But I am a fan of your wood turning and that's for sure!!!

[@christianstahl4099]

Sehr schön geworden! Fast schon als Weißbierstutzen geeignet…

[@JackMackWoodturning]

I’m sorry I can not translate this comment

[@christianstahl4099]

@@JackMackWoodturning: Well done! It nearly could serve as a mug for Bavarian Wheat Beer. [Which is a compliment...]

[@MOLLIMEDIA]

So Art Deco! I love the optical illusion. This is a pretty sweet piece. 👍🏻☺️

[@JackMackWoodturning]

Thanks molly

[@bethcorey6022]

Ok. Oh myyyyy….. that’s gorgeous. You all are talking too technical for me but there is a quilt pattern that is similar, it’s called flying geese. Just stunning Jack

[@مالكوكريم-ص6ث]

Bien hecho, eres un gran artista.

[@JackMackWoodturning]

Sorry I have no way of translating this comment 😕

[@madeleinegombert661]

I know Nick Zametti from You Tube only. Really like his humor and projects. You are also do amazing work.

[@mark-ut8ft]

What a beautiful piece another masterpiece, great work and I love this one.

[@JackMackWoodturning]

Thanks mark

[@cindyraulerson8747]

Thats impressive to me WOW!

[@RainbowSkyDancer]

A-maz-ing! :) I love it when wood gets that iridescent sheen with oil, it's just mindblowingly beautiful. Really good combo of austere precision and welcoming curves. High contrast stuff like that is just too cool. Thanks so much for sharing

[@JackMackWoodturning]

No probs E! Are you a clown?

[@trollhunterii6314]

@@JackMackWoodturning Okay, you should know better by now. It's possible. I could have been a pickle. But I kind of doubt it. Though it is possible. God is the one that uses us. For his purpose We just be along for the ride. But some of us learned how to fly. And that's what's worrying Uncle Sam.

[@peaceworld5393]

O my goodness! Absolutely Stunning!

[@JackMackWoodturning]

Thanks P. Is that a tattoo?

[@peaceworld5393]

@@JackMackWoodturning Yes on my right arm 😁. And yes I’m a female lol 😂

[@HepauDK]

Nice. :) I love when creators use the plies as a feature instead of hiding them. I have made 2 table tops so far, where I have used staves of plywood glued together, so the plies are visible from the top, bottom and ends. The real challenge is getting 2 staves with perfect sides from one end to another to use for the sides of the table top. I coated the first one for my assembly table with water based floor laquer, but it has virtually no resistance to water, so the second one I made recently gets a couple of coats of ship laquer.

[@JackMackWoodturning]

Sounds like a big job! Would love to see 👍🏻😉👀

[@HepauDK]

@@JackMackWoodturning The first one took me a couple of weeks to make, as I only had a narrow European style workbench at my disposal, and had to glue in small batches (lack of clamps). The second one was made in a weekend. :)

[@Maninawig]

It is amazing to see what seems like intricately cuved and stitched wood come from something so different. And how you keep the thickness so consistent.

[@JackMackWoodturning]

Thanks V. What do you do?

[@Maninawig]

@@JackMackWoodturning I once started to get into wood working, trying to find my niche, but then my health took a turn for the worse and some days 2 screws is the max I can take, but I am finally in a spot where I can start a hobby again. For now, I sorta took over a porcelain pouring business (dolls, dishes, ornaments) as the person who used to do it got too old, but I am hoping one day to find a way to get back into wood working (even if it is hand carving) and make my own molds to sell.

[@harryvandevorst1812]

Wow Jack, a great new piece. The ideas you have to make something like this, using the type of wood to get this lines is extraordinary, you have the creativity of someone who can show us a lot more I guess. I wish you a fine weekend!

[@JackMackWoodturning]

Cheers buddy. A fine weekend to you also. Thank you very much for your kind words 👍🏻

[@trollhunterii6314]

@@JackMackWoodturning Good morning to you Patriot. I appreciate it sentiment. Being a long week. Somebody wants me to play a game again. I thought somebody told me we don't have time for games and they want me to write the book. Well, the book is already written. The clues are already begun. But if that's what we got to do in order to get something done. So be it. I left another clue. Now I had to start labeling them because nobody wants to listen. Which kind of means I can't leave any more Trail? But if that's what the Lord wants I be His.

[@trollhunterii6314]

Y

[@IrmaBard]

Здорово! У Вас всегда крутые идеи и великолепное исполнение! Браво!

[@kevingeaney7741]

An inspiring piece of work! Thank you for sharing it!

[@JackMackWoodturning]

Thanks K. Art deco fan?

[@ربحيجبر]

ماشاء الله تبارك الرحمن تسلم ايدك عمل فني جميل تحياتي لك من فلسطين غزه

[@JackMackWoodturning]

I’m sorry I can not translate this comment

[@SiamWoodShop]

Brilliant piece Jack. I always love how the pattern emerges once turned. Great work, take care, John

[@JackMackWoodturning]

Cheers John.

[@yakubpatel1403]

that's called art of wood. amazing and beautiful art piece.

[@JackMackWoodturning]

Thanks Y. How’s it going?

[@yakubpatel1403]

@@JackMackWoodturning all well.

[@leisongivangomo4478]

That’s gorgeous!

[@JackMackWoodturning]

Thanks L. A fan of art deco?

[@leisongivangomo4478]

I am a fan of exquisite art from all around the world!

[@JackMackWoodturning]

Great! So glad you like mine. Thanks for watching buddy 👍🏻😊

[@160RAlmeida]

It looks like a cup, better than some we can see in F1 championship. Congrats

[@JackMackWoodturning]

Nice one. Would you fill it with beer 🍺

[@160RAlmeida]

@@JackMackWoodturning i'll like it

[@Passionsimracing]

Wow just amazing work mate. Really enjoy watching your videos. I am in the middle of building my workshop and I hope to oneday emulate some of the amazing pieces you make.

[@JackMackWoodturning]

Thanks man. I’m sure you will. Art deco fan?

[@Umberto.Goglia]

Genius...what else? Incredible job! Bravo bravissimo!

[@JackMackWoodturning]

Thanks buddy

[@Woodturning-woods-for-soul]

This is a masterpiece!

[@JackMackWoodturning]

Thanks P. Much appreciated 👍🏻😊

[@ScorchedEarthView]

Your table saw sings a beautiful tone when cutting that °45

[@JackMackWoodturning]

Thanks man. Are you a woodworker?

[@kathymoser9750]

So impressed by your patterned plywood designs. Do you have the results pictured when you start?

[@JackMackWoodturning]

Thanks. Yes I drew the plan for this piece before I built it and designed it so that the pattern would be the pattern that emerged.

[@jusitnaltman3544]

Amazing superb marvelous breathtaking piece Jack Mack

[@JackMackWoodturning]

Much appreciated J. Thanks for watching 😊👍🏻😉

[@yota4x405]

I love the look of plywood pieces like this and I’ve tried to replicate some of them but even the cabinet grade plywood I get from a high end supplier has holes throughout the layers. It’s frustrating

[@JackMackWoodturning]

Yeah, just have to use the best pieces you can find. Fill the gaps with wood dust and glue if needs be 👍🏻👍🏻

[@BrokenOakWoodShop]

What finish do you use? Thank you. I love it​@@JackMackWoodturning

[@mr.modern4419]

Fantastic Art Deco style vase. Absolutely amazing work!!!!!!!

[@mohben968]

Great

[@JackMackWoodturning]

Thanks Mo. Art deco fan?

[@Tesnopesno]

I remember loving woodturning in school. these videos make me hate the thing that I didn't do anything about it :D like I'd be so much happier doing that stuff now for 20+ years than what I've been doing.

[@DarthVictive]

Woodturners before supply chain breakdown: Let's turn this awesome exotic hardwood burl! Woodturners in 2022: You know what's great? Plywood!

[@JackMackWoodturning]

You clearly don’t know much about the supply chain issues 😆 we can’t buy sheet material for love nor money either. I have mountains of wood. It all come from my local area but I can’t buy ply. Luckily I can turn pieces from all my saved off it’s 😊😊😉😉 Thanks for watching buddy

[@morpheon_xyz]

Lmao, this is actually a funny way of looking at it, even if it's the opposite as per Jack's statement, but damn it goes to show how things can change in today's life 🙈😅

[@ScorchedEarthView]

I appreciate you recording the sounds. It's a necessary part of the learning curve for me around machines. Always listening. Worked with metal a whole lot. Wood is my new fascination

[@JackMackWoodturning]

Have you turned much metal?

[@warehouseman6325]

Beautiful patterns

[@edhardy1764]

Amazing stuff!! Hypnotizing to watch and every piece truly a work of art. That is TALENT!!

[@garybeasley4885]

I like how you left that “natural” top edge to it, really accents the pattern you built.

[@JackMackWoodturning]

Nice one Gaz. You reckon I should try it without?

[@garybeasley4885]

@@JackMackWoodturning nah, I think you nailed it this time.

[@ierc6532]

Es tan difícil apreciar el arte, sin criticar al artista? Gracias por compartir. Excelente trabajo.

[@JackMackWoodturning]

Sorry I have no way of translating this comment 😕

[@c2thamax246]

“Is it so difficult to appreciate the art, without criticizing the artist? Thanks for sharing. Excellent work.”

[@CanyonWanderer]

Amazing piece!

[@MrKawasKai]

Eine wundervolle Arbeit, werde versuchen es auch so gut hin zu bekommen. Danke für Ihre tollen KZbin Videos. Beste Grüße Kai Dossmann

[@JackMackWoodturning]

Thank you my friend. I’d love to see how your version comes out. 👍🏻

[@murraycatto1]

I like it.Gets the creative juices flowing. Well thought out and handled. Plywood is difficult to deal with.

[@JackMackWoodturning]

You gonna give it a go?

[@christineosullivan3140]

This looks amazing

[@SirHeinzbond]

11:38 or so when the drill stand still and the wood is turning is always a bit of whooo for me.... a great work never thought it would look that beautiful...

[@JackMackWoodturning]

When what happens sorry? I’m not sure I follow. Really glad you enjoyed it 👍🏻

[@SirHeinzbond]

@@JackMackWoodturning when you install the drill i always expecting to be the drill turning and the wood to stand still... this part is for me always like apples falling to sky...

[@JackMackWoodturning]

Hahaha. Of course.

[@SpyderSavino]

Amazing piece! Great video too. Thanks for posting this.

[@digimikek]

Wow is that nice!!! There's no stopping your creativity!

[@JackMackWoodturning]

Haha thanks. What would you use this for ?

[@digimikek]

@@JackMackWoodturning That's a magnificent vase in my. book!

[@mushfiqurrahman2515]

I thought this was gonna be another typical rundown, but this is amazing

[@JackMackWoodturning]

What’s a rundown ?

[@mushfiqurrahman2515]

@@JackMackWoodturning u know, same type of video with the same old wood turning, just making a vase. some of them actually turns out good bcoz of the technics, crafting, creativity, etc. i think this one looked really great in the end.

[@ClintsHobbiesDIY]

Way out of the box. Even the bottom is beautiful.

[@JackMackWoodturning]

Cheers Clint. You going to give this a go ?

[@grannieannie1371]

I'm speechless. That's stunning.

[@JackMackWoodturning]

Thanks G. Art deco fan?

[@1classcarrier]

Wow! Plywood eh? who would think? got to try this soon thank you!