Рет қаралды 37,228
Watch me turn this massive piece of Birch! It took me over 12 months to make this piece due to a long drying period in the middle; what do you think?
The piece was sanded to 1000 grit and finished with 5 coats of Danish oil.
I couldn't do it without all of my wonderful tools, I have linked the most important ones below, check Axminster out if you're interested in using the best woodturning equipment:
My SK100 Lathe Chuck:
www.tagserve.c...
The Best Bandsaw in the business:
www.tagserve.c...
My most important tool (AP508WL Lathe):
www.tagserve.c...
________________________________________________________________
Social Media:
Instagram: harrysmith_woodturning
TikTok: @harrysmithwoodturning
Second Channel: / harrysmithshorts
Designed By HS Channel: / @designedbyhs
Email for quotes and queries: harrysmithwoodturning@gmail.com
__________________________________________________________________________
Starbond:
Use the code: HarrySmith , for 10% OFF Site-Wide - starbond.com/
__________________________________________________________________________
Axminster:
This channel is supported by Axminster. Use this link to support the channel, and buy your own Axminster equipment. www.tagserve.c...
__________________________________________________________________________
This video was edited by Meemoo edits
__________________________________________________________________________
For the custom coins used in the bottom of my pieces head to vonHanke on etsy: www.etsy.com/u...
__________________________________________________________________________
Disclaimer:
My videos are for entertainment purposes only. Some of my techniques might not be the "best" or safest, so when using any tool or machinery always read and understand safety/manufacturers guidelines first.
And Yes, I'm aware that wearing gloves while woodturning is considered an unsafe practice. The gloves I wear are tight-fitting and don’t have any loose threads. I wear them for the protection of my skin. This is a risk that I am willing to take, however I am still very conscious of the potential danger and I do not touch any spinning parts of the lathe. DO NOT copy my actions if you feel unsafe doing so.