Woodturning | Walnut Platter

[@daviddeadman8455]

Great turning. Great music.

[@jpwoodwork]

Thanks buddy

[@johndauphinais953]

Sorry but I disagree completely- music is far too loud and the only reason I stopped watching one minute in

[@jpwoodwork]

@@johndauphinais953 you dont like the video because of the music which you can quite easily turn off? dont you think that is a bit unfair considering the work that went into making the video... oh well, i cant please everyone, thanks for the one minute watch time

[@alohomewoodturningcarlos5267]

Pambihira ng kulay ng kahoy nayan kaibigan napakaganda ng pagkakagawa. Ang galing mo expert ka.wood mate turning

[@jpwoodwork]

Thank you

[@oldmanwoodcraft]

Very impressive, i love the color of the wood after the finish

[@jpwoodwork]

Thanks mate

[@michaelhofer9149]

That is a gorgeous piece of walnut! The grain pattern is to die for!

[@jpwoodwork]

Thanks buddy

[@michaelbishop488]

Good work,but why the music so loud over the turning sounds

[@jpwoodwork]

Thank you, the reason for the music is i live in an area where there is constant background noise now so it would make it practically impossible to make a video without constant reshoots, hope you can understand that, i tend to get this comment a lot and some people are nicer than others

[@michaelbishop488]

@@jpwoodwork thanks for the reply,will deep that in mind 👍

[@jpwoodwork]

@@michaelbishop488 appreciate it

[@jpwoodwork]

@@michaelbishop488 no worries mate

[@RickTurnsWoodturning]

Beautiful bowl, JP!

[@jpwoodwork]

Thanks Rick, appreciate it mate

[@TheKlondikeCraftsman]

Very nice JP! Love it

[@jpwoodwork]

Thanks Lewis

[@booyaa1851]

One of my favourites black walnut, even like the distinctive smell when turning. Cracking job👍

[@jpwoodwork]

Cheers Mark

[@laurencebugeja4160]

Nice piece again Jp well done looking forward to see the next video bye.

[@jpwoodwork]

Thanks buddy

[@heathermacmillan962]

Awesome...walnut is one of my faves...love the colours of it. Turned out great, as always...love it

[@jpwoodwork]

Thanks very much

[@kris_kreations]

WOW!!! I love the grain; it sort of makes the platter oval looking. This is such a pretty piece. Very beautifully done, as usual, Jaime.

[@jpwoodwork]

Thank you very much, i appreciate you

[@GaryGlass-DriftwoodTurner]

Rest job up as ever. Love the colour of that piece

[@GaryGlass-DriftwoodTurner]

That was mean to read great job as everJP lol. Hate predictive text!!

[@jpwoodwork]

Thanks mate

[@jpwoodwork]

lol no worries mate , happens to the best of us

[@SilverBack.]

Amazing piece JP, well done 👏👏👏👏

[@jpwoodwork]

Thanks buddy

[@William_Kenny]

Great looking piece well done 👌 👍

[@jpwoodwork]

Thanks mate

[@PBUCKY1969]

Nice one mate! 👍

[@jpwoodwork]

Thanks buddy

[@WackeyWorxWorkshop]

Looks awesome 👌

[@jpwoodwork]

Cheers Matt

[@Ukenick]

Hi JP. Superb work. Thanks for sharing. I am a bit of a newbie and so curious as to where you might source a piece of walnut like that. Thanks so much

[@jpwoodwork]

This was a while ago now, I got this pice from a wood store place in Scotland I believe but you should be able to get some online just by typing in woodturning bowl blank or something to that effect, thanks a lot

[@jpwoodwork]

@@Ukenick no worries, good luck in your search

[@mountainviewturning5319]

Very nice 👍

[@jpwoodwork]

Thanks buddy

[@joallawestervelt6918]

Wow. Another stunningly gorgeous piece. 😊💕🇺🇸❤

[@jpwoodwork]

Thank you very much

[@jontoolman]

Very nice. Thanks for sharing.

[@jpwoodwork]

Thank you

[@neil_m135]

Great platter jp 👌

[@jpwoodwork]

Thanks mate

[@neiljackson8313]

How thick was this piece in the beginning?

[@jpwoodwork]

this was about an Inch and a Half thick in total

[@DennisDolan-fl3mw]

how thick was the blank when you started?

[@jpwoodwork]

I think it was an inch and a half

[@DennisDolan-fl3mw]

where can I get that sanding sealer?

[@jpwoodwork]

I’m not sure that sanding sealer is available outside of the UK however a great alternative and my now go to spray sanding sealer is by Hampshire sheen and they have distributors in the USA and Canada

[@jackgaskins4170]

Hi JP. How does your lather perform with large diameter wood on it? How has the lathe itself performed?

[@jpwoodwork]

Hiya, so i recently had the opportunity to upgrade to a much bigger lathe and if it wasnt for space i would have kept this lathe, i loved it, i never let me down one, i have turned some huge pieces on it, i turned a 21 inch piece out board on it and it never let me down once, the whole time i had it i never moved it off the middle belt unless i was doing huge pieces where i needed that little more torque and i lowered the belt ratio and once again it performed flawlessly, i highly recommend it if you are looking into buying one :)

[@ddcced123]

Why the music? Distracts from your video.

[@jpwoodwork]

Felt like it

[@richardschaffling9882]

It came out Gorgeous how big is it

[@jpwoodwork]

Thank you very much, i appreciate it, it came out at 13.5 inches in diameter and 2 inches deep

[@andyaveyard]

Hi JP, a new Woodturner here, what was the tool that you were using here please? I'm not sure if it might have been a carbide tipped tool?

[@jpwoodwork]

Hi Andy, they were all carbide tipped tools made by easy wood tools

[@kerrysaunders9996]

Is that a coronet herald?

[@jpwoodwork]

Yes that is correct, it is

[@kerrysaunders9996]

@@jpwoodwork looks like it has lots of power. Great work.

[@jpwoodwork]

@@kerrysaunders9996 it sure does, its has 3 belt positions and ive never moved it off the middle belt but the torque on it is incredible!

[@valdivinobarbosa1100]

Boa noite meu amigo eselenti trabalho muito bom mesmo

[@jpwoodwork]

Muito obrigado, o mesmo para você.

[@DonFaulk0517]

What do you use for finishing before you spray on the cellulose sanding sealer? Where can I get it?or, is it just denatured alcohol to remove the sanding dust?

[@jpwoodwork]

that is correct, it is just Denatured Alcohol, here in the UK we put a purple dye and also call it Methylated Spirits, hope that helps

[@ernieirwin252]

Drop the music

[@jpwoodwork]

Naa, I feel the video needs it given my reasons… thanks for the suggestion and the attitude anyways, Happy 2024

[@jontoolman]

Where did you get the mortise size templates from? Grest video. Thanks for sharing.

[@jpwoodwork]

Thank you, I got them from Amazon, here’s a UK link but if you put the same title in for your country I’m sure you will get the same results…. www.amazon.co.uk/dp/B08DTVW18K/ref=cm_sw_r_cp_awdb_imm_W8YB4A2HRG0AFS5F9RKK

[@billsanders8793]

Unfortunately I did try the US Amazon site and the templates are not available. Only UK as far as I can tell.

[@jpwoodwork]

@@billsanders8793 Ok, i will do some research and ask the guys at Easy wood tools for you as to the availability and get back to you asap

[@billsanders8793]

But here’s an update! If you go the Easy Wood tools home website and select the US store it is listed there for $14.99 US plus shipping. Just ordered mine. Freight to GA was $3.00 reasonable I think.

[@jpwoodwork]

@@billsanders8793 oh thats great news, thanks for letting me know

[@rossandersen942]

Great job. Do you sharpen the carbide inserts?

[@jpwoodwork]

Thank you and no never, some people do but I don’t recommend it

[@BillMulholland1]

🍻👍

[@jpwoodwork]

👍🏻

[@alanmullock381]

Another clonker Jamie!👍👍👍👍👍👍👍👍👍👍👍👍😎😎😎

[@jpwoodwork]

cheers mate

[@donnachamcgowan]

Sanding Sealer is toxic So this platter Cannott be used for food purpose such as fruit or Salad 🥗 🍅 ..But a nice platter.

[@jpwoodwork]

i agree, most of the stuff i turn is decorative or for using for non edible stuff anyways, if i do make something that is intended for food i will work around the sanding sealer :) thanks for watching

[@SteelBladeWoodworks]

Present

[@SteelBladeWoodworks]

Lol I thought I was in the chat when I sent that comment 😂😂😂🤦🏼‍♂️ anyways great turning Jamie really enjoyed the video!!!

[@jpwoodwork]

and correct :D

[@jpwoodwork]

@@SteelBladeWoodworks cheers Joey

[@ConnieConnie824]

🌟🌟🌟🌟🌟

[@jpwoodwork]

Thanks Connie 👍

[@marcenariahobby7pallet]

👏👏👏👏👏👏👏👏👏👏👊🇧🇷👍💯

[@jpwoodwork]

Thank you

[@damasydia]

Music is horrendous

[@jpwoodwork]

sorry you think that, i do try to pick something to suit everyone and change it up too and unfortunately due to the circumstances that i am in, i am left no option but to have music in my videos, if you go to my more recent videos and met people like you in the middle and they seem to be happy about that and done a voice over but there is still music in there again because of the circumstances i am in, believe me i wish i could have just tool sounds but its just not possible

[@SHERPAGUY1]

It’s a bowl not a platter.

[@jpwoodwork]

ok

[@alohomewoodturningcarlos5267]

Likes 226

[@jpwoodwork]

Thanks