Woodturning - Waterfall Vase

[@stephaniejohnson9353]

I can watch this for hours. It fascinates me and your work is incredible.

[@daanh8194]

that blue resin is a nice shade - like the sea in Cornwall sometimes... and it works so lovely against the wood 💕

[@JackMackWoodturning]

😊 what a lovely thought 😍

[@justjulee9135]

That is beautiful! The blue resin was perfect! Now it just needs some fresh cut flowers in it! ☺️

[@JackMackWoodturning]

I’ll go pick some on Monday 😊👍🏻

[@judithfairchild8620]

One very beautiful vase. The grain is amazing and the teal in the epoxy wants to put an electric candle inside it.

[@JackMackWoodturning]

Haha absolutely 👌🏻😊

[@JiggsysShed]

That's a great looking vase. Almost reminds me of one of the football trophies or a pint glass.

[@JackMackWoodturning]

Pint glass for sure 🍺 🤣

[@fleetswoodshop3339]

JACK I LOVE THE BLUE .GREAT JOB ON THE VASE ITS AWESOME. FROM DOUG

[@JackMackWoodturning]

Thanks Doug. Glad you enjoyed it 😊👍🏻

[@Alexchachula]

I like the minimal use of resin you use. I have seen quit a few times where the resin completely encased the wood seems like overkill to me. Keep up the great work Jack!

[@JackMackWoodturning]

Cheers Alex. Much appreciated mate 😊👍🏻

[@philstafford75]

Very nice Jack 👍

[@JackMackWoodturning]

Thanks P. Much appreciated 👍🏻😊

[@madeleinegombert661]

Always Fun To Watch What You Will Make. 😎

[@JackMackWoodturning]

Always fun to make what you will watch 😊👍🏻😉

[@tonymorgan3526]

Great video, that looks impressive, fair play to you

[@JackMackWoodturning]

Thanks Tony. Are you a woodturner?

[@tonymorgan3526]

@@JackMackWoodturning no, but I do admire those who do it well 👍

[@Umberto.Goglia]

You're not Jack Mack, You're Jack Master! Beautiful job as usual, really thanks for this new lesson of turning!

[@JackMackWoodturning]

Haha thanks Umberto. Much appreciated buddy 😊👍🏻

[@SMcCaskill]

The maple looks smilar to what is called tiger maple. It's a very beautiful vase and the wood grain is awesome.

[@JackMackWoodturning]

Thanks S. Much appreciated 😊👍🏻

[@pamelaremel7477]

That's neat. Love the wood!

[@1954JDR]

Beautiful vase, the grain and colors are gorgeous.

[@JackMackWoodturning]

Thanks James. Much appreciated 😊👍🏻

[@pattigolden1]

So pretty!

[@JackMackWoodturning]

Thanks P. Much appreciated 😊👍🏻

[@kristgeo]

Very nice!!

[@JackMackWoodturning]

Cheers K. Thanks for watching 😊👍🏻

[@susanwills4723]

How gorgeous it’s the grain is amazing and the blue is so pretty. Thank you for sharing 👍👍👍👍👍👍👍

[@JackMackWoodturning]

No problem Sue. Glad you enjoyed it 👍🏻😊

[@DougMilleratWoodSpunRound]

Beautiful vase. Very nicely done. Thanks for sharing.

[@JackMackWoodturning]

Nice one Doug. Much appreciated 👍🏻👌🏻😊

[@michaelmiller2805]

I was thinking that this would be an amazing look for a travel coffee mug.

[@JackMackWoodturning]

Nice idea

[@RevdUp.Art.Fotografer]

That is beautiful wood. I couldn't tell what it was was in the very beginning. It looks a bit different now. 😉

[@JackMackWoodturning]

Thanks buddy. Much appreciated 😊👍🏻

[@rustysmommy50]

Loved the patterns in the wood, you showcased them well! Beautiful work!

[@JackMackWoodturning]

Thanks RM, what would you use it for?

[@rustysmommy50]

@@JackMackWoodturning flowers, but not fresh ones. They would also have to be made of wood.

[@eliotshimkofsky8752]

Another amazing work of art. I am enthralled with the colour combination of the two wood species. And the resin makes it pop. Thank you sir.

[@JackMackWoodturning]

Cheers E. Thanks for watching man 😊👍🏻

[@vinceianni4026]

Hi Jack beautifully done good job my friend

[@JackMackWoodturning]

Much appreciated Vince. Glad you enjoyed it 😊👍🏻

[@steve_wa]

Really creative. Like the minimal use of resin as it is expensive. You could also make curves instead of straight edges. Like your work Jack!!

[@JackMackWoodturning]

Thanks Steve. Glad you enjoyed it 👍🏻😊

[@moniquekelsey7856]

I like it really different for a vase ❤🇦🇺

[@JackMackWoodturning]

This one is for sale on my site actually. Jackmackwoodturning.com

[@jackknows6509]

Beautiful grain... Would like to see more done with that maple. Great job Jack -Jack

[@JackMackWoodturning]

I have a few more ideas in store for it 😊👍🏻

[@ibm4063]

Ich schaue ihnen so interessiert und intensiv zu, dass ich manchmal die Augen schließen muss, weil ich fürchte, die Holzspäne fliegen mir in die Augen 🤣🤣🤣🤣 schöne Arbeit 🤗

[@JackMackWoodturning]

Sorry I have no way of translating this

[@SMcCaskill]

That is a beautiful vase.

[@JackMackWoodturning]

Thanks S. Glad you enjoyed it 👍🏻😊

[@mountainviewturning5319]

Looks great

[@JackMackWoodturning]

Thanks man. 👍🏻😊

[@renater.540]

Simplicity of design, nevertheless stunning beauty . Love it!

[@josecondemarin9586]

Hello Jack, hope you are doing well, WOW !! Very classy vase awesome design and combination of colors. You never stop amazing your viewers. Take care thanks 😊

[@JackMackWoodturning]

Thanks Jose. Glad you enjoyed it 😊👍🏻

[@MEGAMIGA]

Nice shape!

[@JackMackWoodturning]

Nice one man 😉👍🏻

[@MEGAMIGA]

@@JackMackWoodturning Nice answer mate!

[@JackMackWoodturning]

??

[@MEGAMIGA]

@@JackMackWoodturning I followed the same pattern as your answer ;)

[@janicelucas8561]

Nice job on the vase!! I enjoy watching wood turning, u r channel is a good one. Watching from CO.

[@JackMackWoodturning]

Much love from the uk 🇬🇧

[@georgedistel1203]

Pardon my language but that is absolutely frigging beautiful!

[@JackMackWoodturning]

Thanks G. Glad you enjoyed it buddy 😊👍🏻

[@natescarvingcreations2978]

You're talented mate. Great work!

[@brucehursman8874]

Wow, you are quite the artist. Amazing work.

[@MsWDWFAN1]

Beautiful piece! Love the color!

[@JackMackWoodturning]

Thanks buddy. Much appreciated 😊👍🏻

[@Son0565]

❤ beautiful.

[@JackMackWoodturning]

Thanks Sonya. Much appreciated 👍🏻😊

[@lyndadennin7471]

Very impressive, I love the simplicity of the design. Thanks for sharing😉😉

[@JackMackWoodturning]

Glad you like it! Did you like the colour?

[@sasquatch885]

Brilliant!

[@JackMackWoodturning]

Thanks man. 😊👍🏻

[@pamelalee1508]

Good afternoon Jack... Such a great choice of the maple...the movement in its grain goes wonderfully with the waterfall concept...💡... Beautiful work as always...thank you...have a great weekend...🌿🌿🌿

[@JackMackWoodturning]

Nice one Pam. You too 😊😉👍🏻

[@alexclark6777]

It's a beauty!

[@JackMackWoodturning]

Nice one Alex, what would you keep inside?

[@shcichannel]

Amazing job!!😻💓👌👍👏👏👏

[@JackMackWoodturning]

Thanks buddy. Would have this in your home. ?

[@shcichannel]

@@JackMackWoodturning definitely mate, i would really love to have one in my home!!☺😊

[@kelvincolemanAnimal]

That piece looks fantastic you have made a beautiful vase. You have some awesome skills 👍👍👍😊😊😊♥️

[@JackMackWoodturning]

Thanks K. Glad you enjoyed it 😊👍🏻

[@silviagracielastaviaky8590]

Me encantan las cosas que haces, son trabajos hermosos!!!

[@treasurehog]

Another stunning piece of art! Well done!

[@JackMackWoodturning]

Thanks TH. Glad you enjoyed it 😊👍🏻🙏

[@SiamWoodShop]

Nice one Jack, great choice of pigments in the resin. Take care, John

[@JackMackWoodturning]

Cheers John 😉👍🏻😊

[@timmienorrie]

Niiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiice!

[@JackMackWoodturning]

Thaaaaaaaaaaaaaaaaanks 😊👍🏻

[@denisvienat849]

Très jolie bravo 👍👏

[@JackMackWoodturning]

Merci 😊👍🏻

[@ТатьянаКузнецова-н4ч]

👍👍👍👏👏👏 bravo!!!

[@JackMackWoodturning]

Merci! 😊👍🏻

[@S_Eglington]

It's all good stuff your eye for form as good as ever but I do miss the ones that start with just a lump of wood on the lathe.

[@JackMackWoodturning]

There will be more to come Sam 😉😊🤣

[@mark-ut8ft]

Very beautiful and unique, love the contrast of the wood vs resin. Great job. Great talent.

[@JackMackWoodturning]

Thanks Mark, much appreciated 😊👍🏻

[@ellie_moni90]

Love this blue ❤

[@arthurcortright2186]

Your stock looked like a warped piece of quarter inch plywood till you got it over to the saw. I was wondering how you were going to do anything with it. Nice work. As always, all the best to everyone. Chef Scott 👩‍🍳

[@JackMackWoodturning]

Thanks man. Much appreciated 😊👍🏻

[@johnvargo5695]

Hi Jack, two questions. Do you "flame" a resin pour of that depth to remove bubbles? Second, do you seal the inside down to the bottom? To avoid any further drying or cracking from the inside. Tanks.

[@JackMackWoodturning]

Hi John. Flaming the surface of a resin pour will clear the top and break the surface tension of any bubbles it makes contact with but will not effect bubbles blow the surface of the resin. On a piece that is due to be turned flaming is unnecessary as the outermost surface will most likely be turned away. If you pay attention to the placement of the glue holding the blank together Pryor to the resin pour you’ll see that it creates a full seal around both areas that receive resin. Hope that helps 👍🏻

[@johnvargo5695]

@@JackMackWoodturning Thanks, everything helps. Last thing I turned was a 42" wide table base (Outboard side of my Delta lathe head) and center column for a Hi-top kitchen table. Since then, texting drivers, caused 4 broken necks for me. I'm making arrangements to move my lathe to a more convenient location , as I no longer have use of my legs. These smaller projects appeal to me and the limited use I have of my arms. Stay tuned. Hahaha.

[@Docv10]

I really like this one! This gives me ideas ! Great job :)

[@JackMackWoodturning]

Oooh what ideas ?

[@Docv10]

Different things like vases, lamps or just a piece of art with leds in the epoxy. I definitely have to try those !

[@will.scotnativeingreece]

HI Jack, another unique vase, was a bit surprised you took of the ends (dark wood) did you change your mind ? still fantastic. Cheers Will

[@JackMackWoodturning]

Hey will. The dark wood is black walnut. I didn’t have a set plan when starting so used walnut incase I’d leave them on. It’s actually the best voice of wood I had too as iv got shelves filled with little offcuts like this. Probs cheaper than ply at the moment too 😆

[@ciaran6309]

Ya we all have one of those saws in our garage.lol..

[@JackMackWoodturning]

What saws?

[@ciaran6309]

All them

[@JackMackWoodturning]

I gots aaaaalll them saws 😉

[@ste15243]

so beautiful pal, same as i've said before, i wish i had a 10th of the skill to make something so nice - keep up the great work m8 👍

[@JackMackWoodturning]

Thanks a lot Steve. Much appreciated 😊👍🏻

[@w4447]

I wonder if you could turn it into lava lamp some how. Have to use a more clear apoxy maybe.

[@JackMackWoodturning]

Nice idea! 😊👍🏻

[@brendaconner1076]

Now this I love. I can just picture it sitting in my front window with yellow daisies in it, artificial of course. West Virginia University colors are blue and yellow (gold), and US Navy colors are blue and gold. This I would purchase if available.

[@JackMackWoodturning]

Thanks Brenda. It is available. Just drop me a line at [e-mail] Or on Facebook or instagram and we can have a chat about it. Thanks 👍🏻

[@brendaconner1076]

I have emailed you. Did it go to your junk mail?

[@David-jn4fx]

Hey Jack! Always looking foreword to the next masterpiece. 🤓 Never ever disappointed man! What kind of wood is that? The soft marble grain is nice with that blue! Maybe a piece in red man, only because its my favorite color.. lol.. Just Awesome Jack! Cheers man!

[@JackMackWoodturning]

Thanks David. It’s maple. 😊👍🏻

[@David-jn4fx]

@@JackMackWoodturning The 🍁 was a great choice!

[@spanner5126]

Wow...Waterfall Vase! So where did you get your inspiration from for this piece? Shame you couldn't give credit especially if you're not even going to give your video a different title ..

[@JackMackWoodturning]

Why do you want credit??

[@spanner5126]

@@JackMackWoodturning I dont want credit, I'm no woodturner but I'm referring to an Andy Phillip video, pretty much same thumbnail and same name. Maybe I'm wrong and it's just a coincidence.

[@JackMackWoodturning]

Who? You’ve lost me pal.

[@goatqbjmp1]

@spanner5126 @JackMackWoodturning kzbin.info/www/bejne/n2eaY6Sbe72ga68si=yXvZRgsTm1a0pt2l

[@goatqbjmp1]

kzbin.info/www/bejne/n2eaY6Sbe72ga68si=yXvZRgsTm1a0pt2l

[@matthewcook953]

Hi Jack, as always you have excelled on this project It turned out perfect. I love the flash in the wood. I'm probably wrong but maybe curly maple? Another masterpiece Congratulations on the growth of your channel. With your design you should be up there with the rest. Top respect from the South East of England

[@JackMackWoodturning]

You are correct! I have a lot of maple and mahogany at the moment. Thanks man 😊👍🏻

[@valdemirmoura2371]

muito bom parabéns

[@JackMackWoodturning]

Sorry I have no way of translating this 👍🏻

[@stevenseverance3692]

Very nice 👍💯 Job 👌👏 my Wife would make me buy that in a second. She loves Royal Blue 🔵. Sincerely Yours 🤠 Mr Severance, "The Cake 😋 🍰🎂 🥳 🎉 🎈 Man", "World 🌎🌍 Cruiser"&"Succulent Collector", and "Teacup's & Saucer's Set's and Teapot 🫖 Collector".

[@JackMackWoodturning]

Thanks Mr S. It might be for sale on my website soon 😉

[@JackMackWoodturning]

jackmackwoodturning.com/

[@woodskip]

A lovely piece of work. The only thing is that he used CA glue to hold the wood together. I find CA glue has a short operating time, less than 2 years. It's becomes so brittle that it breaks even under light use.

[@JackMackWoodturning]

You miss the bit with the masses of resin Dave ?? You think maybe that might hold the piece together?? And maybe the CA was to hold the wood and seal the gaps so resin could be poured 😆😆😆

[@woodskip]

@@JackMackWoodturning Good points. I am just leary of using CA glue for anything structural.

[@bulkhead]

I noticed your first sanding pass was with your hand, is that about 80 grit? Beautiful vase.

[@JackMackWoodturning]

I tend to start sanding at around 240-320 grit. Do you start at 80?

[@hectorfernandez3768]

hello brother, a question with what oil do you finish your work? or how do you achieve that ending? Greetings from Chile!😁

[@JackMackWoodturning]

Yo H, generally shellac sealer or then danish oil. 😉👍🏻

[@hectorfernandez3768]

@@JackMackWoodturning tanks bro!😁

[@margaretcassidy7830]

Is this waterfall vase still for sell ? If so how much in U S dollars? The wood grain is very beautiful. You such beautiful work. I love what you do.

[@paulblase3955]

What kind of adhesive and epoxy, please?

[@JackMackWoodturning]

The adhesive for the blank prep was CA glue ( super glue) the resin, which became the main adhesive is alumilte amazing clear cast.

[@amandatallis9875]

Hello Jack this a real unique vase I really love it the grain and the colour of the resin is wonderful I really like it well done you really are clever . How much would this cost. What wood did you use please?

[@JackMackWoodturning]

It is Maple. How much do you think it is worth?

[@amandatallis9875]

@@JackMackWoodturning £40/£50

[@ciaran6309]

Expensive equipment?

[@JackMackWoodturning]

Yeah, but this is no hobby. I’m a professional woodturner.. the videos and silly products in the video are something I do on the side of my production woodturning.

[@matthewhopley6408]

What is the brand/make of your lathe?

[@JackMackWoodturning]

Axminster 😊👍🏻

[@gwenbulla5371]

😊😊😊

[@JackMackWoodturning]

👍🏻👍🏻👍🏻

[@wilmafazzano6261]

😀👏👏❤👍

[@mylabryant4054]

Pretty, but l wouldn't have wasted the Pretty grain

[@JackMackWoodturning]

What grain?

[@ОкоВово-т3ы]

Ну такое себе

[@JackMackWoodturning]

Sorry I have no way of translating this

[@omargelsumino6462]

?????

[@JackMackWoodturning]

Sorry, was that a question?

[@Factchekka]

Meh...

[@lorddd1753]

The vase is it water proof? If not how would you?

[@JackMackWoodturning]

It would need to be coated in water resistant resin to be used for fresh flowers..