Creative DIY Ideas Using Wood For Your Home // How to build a DIY wooden folding ladder

Creative DIY Ideas Using Wood For Your Home // How to build a DIY wooden folding ladder
#WoodworkingSkill
★Thank for watching!
★Please like, share, and subscribe our Channel here : bit.ly/2RtjjlT
★More video Woodworking Projects: bit.ly/31F7kpW

[@Sobhan385]

Perfect 👌 ❤

[@WencheHberg]

I bought this as a gift for my friend kzbin.infoUgkxcZqgZ8Ynkiz5n_LxIWRlAicuzmz5kCHG who is just starting out in the world of wood work. He loves it!! There is a great section on different wood and what to use for what kind of job and a similar section for tools as well. The projects in it are things you probably would have a go at with clear instructions, pictures, videos and diagrams throughout. Great for a beginner/amateur wood worker.

[@PaulPaid]

Nice job. Only thing I would've done differently is to also cut the top and bottom of the supporting legs at an angle so the "A" has a wider stance for better stability. Come to think of it, I would also screw some supporting blocks under both sides of each step. Be sure not to screw into the grain (cut) side of the wood. This will give greater strength to the steps.

[@АзатКорсаков]

If the black screws break, flight from a height is guaranteed! Plant on dowels, slots, or stops under the steps, you’re right!

[@aleidabianchi1434]

Hmmm... I finally followed Ann's advice and took woodglut instructions. It's great for beginners and has some advanced stuff too.

[@wiyoto1233]

Yg buat manjat kaki gk sah terlalu halus. Biar gak licin. Maaf ini sekedar untuk meramaikan comen. Makasih ilmunya kapan 2 aku tiru.

[@aleidabianchi1434]

I did it myself with the woodglut plans. I think this is the best way to find out how to build it.

[@hawidymm9618]

ممتاز شكرا ((اخوكم من ليبيا))

[@nprakasannaduvilayil1363]

Good

[@troyarthur829]

Very nice, but I think the back legs should lean out a little farther to make the ladder more sturdy. It can collapse very easily the way you have it.

[@woodworkingskill]

Thank you for watching the video. Wish you good health

[@hugochiroquesilva4827]

Lindo proyecto... like y suscripción.. saludos desde Piura Perú ❤️🇵🇪👍

[@bernieriklong7270]

Nothing to stop the support legs from opening flat The stress on those wee little hinges would be tremendous if so

[@martinrocha9228]

Excelente trabajo podrías compartir las medidas saludos desde México

[@djokosuprapto1867]

Pekerjaannya rapih. Terima kasih bang sdh berbagi ilmunya.

[@unnikrishnannairk.6883]

Good work. Please apply glue before screwing to ensure sturdy bondage.

[@edelryleite1272]

Excelente job. Congratulations.

[@gibobachacay9571]

Lagyan mo ng stopper bawat under stepboard boss para matibay...delikado yan,screw lang ang nakahawak sa stepboard..

[@legrandeileen4863]

Bravo, beautiful. 😊😊

[@mancingmaniak7764]

Mantap tutorialnya kawan, salam balik supportnya 🙏

[@arshadkhan5565]

Naic 👌👌👌👌

[@artemiocastillo7592]

Muy excelente idea del acabado de esa escalera sobre todo para ser utilizada para pintar techos Paredes o poner algún foco o algún abanico de techo. Gracias por el video👏👏👏👏🙅🙋👍

[@daffaibnuhafiz]

Kreatif || thanks you for sharing❤️

[@jungbechtospk40]

I did it too. This is what I used Woodglut designs for

[@julljapanese1376]

Great work.mantap

[@auliyahfernandina5225]

WOOD WORKING IDEA YEAY I LIKE THIS NICE GOOD !!!

[@peterhernandez9683]

La haré igual. Gracias por compartir

[@benjozgarage6820]

Mantap pak tukang

[@orlandocarrenomejia8802]

Excelente trabajo en madera, muy práctico, gracias por compartir sus ideas.

[@shellythomas1849]

From what I seen & watched, it would have been very nice if you would have taken the time to add in the cut measurements of each board pieces that were cut, & the screw size used, & the hinge size, that was also used for the project. So one could replicate the beautiful ❤️ job you have just finished.. Job very well done, but please go back -&- add-in measurements please.. Great Job Young Man...

[@dedemaulana3729]

Good job

[@MrVodKanocker]

poor job, this is death trap ladder

[@damienzinck2526]

Hello Cool bonne idée

[@erginenis894]

Çok güzel oldu. Basamağın en alt taban seviyesine destek bloku koyarsan dengede daha güvenli durur.

[@jaimeaugusto190]

Eu colocaria uma corrente ou corda para evitar que deslize em superfícies escorregadias. Abraço do Brasil

[@juanmanuelamadorabarca7211]

Excelente contenido en video

[@AKAV_FURKAN]

bro can you give me the measurements when i will do it.

[@erginenis894]

Çok güzel tebrik ederim. Merdivenin kaymamasi için alttan küçük demir ile bağlantı kur

[@aaa-bm7tu]

Good job 👍😊.. But I think the degree of angle not safe enough 🌹

[@j.b.8767]

Pretty cool.! I especially like the jointer/planer, and table saw? I love that thing! But I'm wondering, who are the chipmunks, and where did they go....??

[@FWS99channel]

Diy wood folding ladder bravo

[@saharshbhadake5877]

👌👌👌 👍👍👍

[@lostinferno339]

ok sana kaso walang glue mga apakan pwede n rin matibay nmn ang screw at walang support yung gitna ng ladder pwede ka tumaob dyn.

[@richardpc9778]

buena idea gracias por el tip , seria bueno que tambien conpartas las medidas de tus proyectos

[@yantichannel5243]

Assalamualaikum bagus sekali ya Kak

[@bharattrivedi9656]

Very good job thanks

[@juanmoralesvazquez3649]

Excelente buenos tardes 👋👋👋

[@izal8888]

Keren, mantappp👍🏼

[@MartinSias-e1w]

👌

[@deomedesferreiragomesfilho7706]

gostei muito parabens pela criatividade

[@starydedecek]

Ty dve prkýnka na podpěře bych dal dovnitř ! Jinak super video.

[@indokreatifideas]

Good 👍

[@LJBevensII]

Nice... Simple, inexpensive and effective.. Good job

[@yralicontreras1018]

Muy fácil... gracias

[@Fikry-Elfassakh]

Bravo .

[@pitamahcarpentr1]

Good work sir g

[@frankstover3444]

Awesome job 👏 👍 🙌

[@ADITYAARTACADEMY]

Awesome 👍👍

[@KBBAKTHA]

very nice video and design. Please add a locking mechanism, so the ladder will not accidentally close . Thanks for sharing

[@diahrahmawati6764]

Mantap pisan

[@shantelguetgen4157]

I have done very similar with Woodglut designs.

[@culllaticiqsu83]

Thanks for idea. Good plans!

[@randroymosquiola]

If you give that to me, I will not use that. I'm nervous about its stability. The angle of the ladder is too steep, the supporting back end is almost 90 degrees. Good luck on that thing.

[@JEJAKKANGKHOLIK]

Nice job gun

[@JuanSanchez-hf2pb]

Bonita la escalera

[@romilsonsoares1199]

Top

[@shantaymadison5581]

Stodoys has a very large project base.

[@jorgecastello1021]

Trabajo medio pelo. Con todas las herramientas y el taller que tiene lo pudo haber hecho mucho mejor.

[@Пётр-с4ж9в]

На лесенках нужно было попрыгать и узнать надежность конструкции. За идею + за качество и надежность - - - - - - !!!

[@bangipulanaktukang3751]

Impian punya alat seperti itu

[@Harsianto1]

mat pagi, mau tanya nih kalau mesin belah potong dan ketap seperti ini berapa harganya dan dimana saya bisa dapat infonya, terima kasih.

[@Farisboss]

👍🙋‍♂️🇮🇳

[@romilsonsoares1199]

Muito bom

[@sopichannel4227]

Like this 👍🙏

[@FansdAbdelkaderElSector]

kzbin.info/door/V80dDFcIqZu-PrfypvxtfQ

[@dietrichbraunmuller5895]

👍👍👍👍👏👏👏👏👍👍

[@ricaroles]

Amazing. I am from indonesia

[@FansdAbdelkaderElSector]

kzbin.info/door/V80dDFcIqZu-PrfypvxtfQ

[@ricaroles]

@@FansdAbdelkaderElSector what

[@محمدمحمد-ت3ذ9ش]

فكرة رائعة لو كان راس السلم شبه صندوق لوضع اغراض عمل عند الحاجة دون النزول والصعود*الجزائر#

[@ffff1758]

And who the hell has got such machines at home!?!?!?!

[@dianrangkuti7138]

It's too fancy wood if you make only for stairs hahaha

[@sheriffawzy6564]

Does the nail have strength enough to bear a weight like man?!

[@espritlibre6425]

Same question

[@MuhammadYunus-pi4vt]

Keren.

[@asepzaenudin7591]

👍👍👍👍💪

[@casapigupigu1484]

Hola, soy Myriam de Argentina y queria saber que es lo que le pones o que tiene ese pomo ...aceite, pegamento...que es? gracias saludos Myriam

[@josevelez1557]

Yo nunca aseguraría el peldaño con el tornillo directamente, el peso de la persona hace que el peldaño se desgarre donde va el tornillo , yo le colocaría trozos de la misma madera y arriba el peldaño

[@mysticker2u]

Another over-weighted DIY ladder I have seen from youtube.

[@reynacamachomora4527]

Muy bien explicado

[@48fitness]

Use that guard when you are using planner for safety

[@makena70danielmascas]

Excelent video! Direct like 👍 from România 😉 🍷

[@وصفاتتافوكت]

Great and nice job

[@luisreynalopes5016]

Buen trabajo. Buena idea !

[@humanityisouressence3114]

perfect

[@LuisAlvarez-ho4ro]

Gracias amigo excelente video muy útil su tutorial saludos desde Colombia.

[@glennpadilla7207]

Wow awesome idea.. The best sir.. Yung cutting na pahalang ilang degrees yan sir thanks more power to you

[@SMee67]

Great work mate 👍🏽👍🏽

[@juanorozconavarro5740]

El paso a paso para hacer la escalera medidas

[@tructieptinvui1248]

great friends, see you guys again

[@FansdAbdelkaderElSector]

kzbin.info/door/V80dDFcIqZu-PrfypvxtfQ

[@SlametRiyadiBocoran]

Ide yg cemerlang

[@DanielSouza-nu4dq]

Parabéns. Gostei também da música de fundo.

[@afonso125ferreira5]

Legal

[@juanmariocisnerosflores9560]

Si es para adorno está muy bien, si es para escalera para mí es cero confianza.

[@refreshingmoments6325]

Yes, I am going to buy these 20000 dollar equipments, then I will DIY..

[@alandaulay7889]

the idea is ordinary, but I love it.. Tx

[@guillermovazquez7471]

El proyecto es bueno pero no metería madera con nudos por seguridad y la base de arriba en una sola pieza xq de puede partir