Amazing Excellent Skill Of The Carpenter - How To Installation A New Wood Door Lock

Amazing Excellent Skill Of The Carpenter - How To Installation A New Wood Door Lock
Thanks for watching, subscribe & share!
► Subscribe to channel: goo.gl/8vZEZZ

[@bene6952]

Old school craftsman at work! Love it. He did much better job with few out dated tools then most new school carpenters with all the latest new school tools at their disposal!

[@mackoramos9289]

bene6952 😳😳😳😳😳😳😳😳😳🤣🤣🤣🤣🤣🤣 you got it brother!!

[@petrovoselo518]

You are 100% right.

[@gattonpc]

He did a god job.. but that CHEAP Door Lock on that nice door.. says something...that the old school craftman don't give a damn about security...not to mention.. it looks like crap on that door...so keep your OLD craftman work for yourself.. i prefer the new tech.

[@JohnAVasquez]

The first half of the kzbin.infoUgkx3ICSK6nSknaL_45CU2NmFSoXjarGMDiJ book is everything about wood: types, tools, finishes, setting up shop etc. The second half is all about doing projects for inside and outside of the home. The color pictures are helpful. After reading a dozen of these types of books, this is probably the best overall (layout, color photos, plans). Only detraction is that many of the projects use a table saw/router/planer, which are usually expensive and take up space, so the plans are less friendly to newcomers and the budget conscious. But I know I can use a drill, circular saw or a jigsaw to make the projects.

[@SmartLockManufacturers]

Very good smart door lock installation, I was looking at this gate 😀

[@normanfrench3269]

A true wood butcher. I was taught to cut the face plates in first reasons if you have a run of doors you mark the plates so they are exactly the same height from the top of the doors and it is easy to get a deep face plate out of parallel with the edge of the door especially if it is 220 deep. Suppose I am old old school. This man is a proper badger.

[@patrickkeefe3679]

Very nice job considering the tools you have are older. U.S. carpenters cry if they have to bring out a chisel at all.

[@Leeroy6572]

Reckon he made them tools in metalwork n woodwork at school n the steel toe capped flip flops are class, good job

[@combsd3283]

If you look in this guy's tool box all you're going to find is that drill. I thought, man, what a hack - until I saw him rockin those flip-flops at 6:41. I realized immediately he was a true professional at that point.

[@dillsplosion5334]

That drill looks older than Kirk Douglas

[@furniturexyzall6061]

Bhut accha video 🤘🤘

[@paramasivamparamasivam1887]

This is amazing skills most of people can't do understand.

[@ethankranes5830]

Regardless of his process, the end result was very nice, clean looking, and functional. Still a skilled craftsman right here. Good work.

[@muhamadbasir3477]

You are right bro,at least we can learn it.

[@ironskull27]

No nice dude...no skilled either

[@alexmyronenko2895]

Как, мастера с таким инструментом, можно было допустить к такой красивой двери?

[@user-xq5mn6kw2c]

Это же нищий,вьетнам.Там все такие!!

[@Sultan-r8h]

Иные "мастера" с хорошими инструментами и так не смогут /

[@mixtube797]

as a basic/starter it's OK. but amazing word for this would be an abuse for the professional carpenters. Thanks for sharing the video

[@docdude3007]

Im a Carpenter with 30 years experience, ive fitted thousands of mortice locks and he did a good job. What do you do for a living ? Type on a keyboard I bet

[@rhdtv2002]

That guys best skills are his balls...wooo..brave guy..

[@tomoguchi]

I think the fact he rocks up with a whacking ode chunk of 2x2 instead of a mallet says it all. Friday afternoon job and knock this is! "Amazing" :D

[@suranderjangra7440]

Good luck #skwoodcrafts spot

[@mattgodwin4712]

Loving the clearly visible badly chipped wood behind the lock plate!! Those doors look expensive? If they were my doors I'd be royally pissed!

[@nathanthomas8222]

Excellent demonstration in the use of the 'safety squint' there

[@josifnguyen632]

I am a carpenter myself and i know its not perfect but with the tools hes got, the guy did a pretty damn good job, check out his screw driver and that wooden hammer! i bet those of you that think you can do better can't do half as good as he did with those tools. you guys will be whinging.... i need my motise router kit or i need my estwing hammer.....

[@cougill_trim_and_cabinets]

Josif Nguyen exactly! I’m a pro too, and it’s obviously not a great install, but he’s installing a mortise lock on a fancy door in 15 minutes with a thrift store tool kit. The lock strikes, the bores are hidden, and it could stand some touch up, but he’s probably making less than $5 a lock set ffs.

[@mendingdiy3548]

nice, good job mybro, use a simple tool for cheap price installment, and bring your fancy router if have a good price for installment. 😊

[@CCW-wg8ds]

What most of you are missing here is they're using a lot of hand made tools. And doing a pretty nice job with them

[@safelinefleet6633]

I can only read the word "Amazing: in the title with sarcasm. Is that intended?

[@mirceaferencz938]

Looks good , Stevie Wonder totally agree !

[@jimtomlinsom1279]

That's about the standard I would achieve...when I'm in a rush...drunk...I'm a painter

[@hendrax5889]

The only amazing thing i see here is the amazement i have watching this, wondering who let you loose on this once beautiful door. Knife your lines for a seamless fit and use a trimmer/router for accurate depth across the board.

[@lukasochola576]

Just wondering, the person who put up this video does he really know the meaning of the word amazing and excellent. If i were to grade this job i would give it a D+

[@docdude3007]

I agree its not amazing but why the D- ? Im a carpenter from Australia and thats the way we fit mortice locks. I'll clarify that, if Im installing one I'll use a speedbore, if im doing 20 I'll pull out my trencher. Have you ever installed a mortice lock yourself or are you giving it a D- because you think there must be another way its done ?

[@jkvideoscct1348]

Ko subscribe

[@howlinger8610]

I am not really sure why is an “amazing skill” most of the people that work with their hands can mount a door handle and locking mechanism, it’s not like he crafted a carved door from scratch..

[@carlosvasquez-um9qq]

VolpeGrigiaPorcaPuttana installing locks is not as easy as you think. The locksmith company I work for constantly goes out to fix locks that were installed by carpenters, architect companies and other construction companies. You’d think they’d be capable of doing such work since they literally build for a living.

[@BMCliveinside1]

You'd be surprised at how many times carpenters have paid me to hang doors for them lol. It's one of them jobs that tests your skills as a chippy. Like doing masons miters on work surfaces.

[@jimimayn]

For a Danish carpenter this is a freakin standard job

[@docdude3007]

I dont see whats so amazing, thats the way we have fitted mortice locks for a long time

[@DanielPaprocki]

Thanks. This is what I was looking for 😁👍🏻

[@pakistanboys]

It's easy to criticize others my opinion Not a bad job at all considering the tools he's using

[@spooky6832]

looks like something i would do:) i am not a carpenter

[@farmanali-lt3uz]

Call me my WhatsApp number imo number [phone]

[@zyjwprawdzie1538]

grats :)

[@bradheuvel7614]

Excellent video Thankyou

[@joeclark9042]

Hey buddy what kind of lock is that that door handle lock can you give me a model number off of that please I like to get me one

[@Anti-socialSocialClub]

Forget this fool...amazing is the guy that made the rest of the door!

[@jayrollo6029]

Yer 👍🏻

[@englishfluencyteacher]

Very nice

[@oblio9147]

Some of these videos show an astounding amount of creativity, finesse, and skill by craftsman using limited and inferior tools in suboptimal work environments. This is just pure butchery.

[@wokiahy7851]

Nice bro

[@user-kv1qg3xq5o]

Это не мастер, это~солдат, какой инструмент дали тем и сделал.

[@d3zmon441]

Очень топорная работа

[@jetbikes1]

The guy did a good job for what tools he had .

[@gregmcaree]

Absolutely nothing amazing about that guys skill levels.He’s a bit rough to say the least!

Well... for the 40ish cents he got from the job, maybe it's not that bad. :D 40c before tax*

[@alexvzdor5826]

U Absolutely right!! He make work rough, not accuracy, and use no prof tools

[@syedainbaltistani1397]

very helpful Video for me..

[@anthonyromano8565]

The 1/16 gap at the top of the shallow lock mortise would have ruined my day on a mahogany door like that.

[@geoleob]

AR, It looks like a composite core with veneer. Not solid wood.

[@anthonyromano8565]

The styles look like solid mahogany as he chisels in the 200 dollar mortise lock. kzbin.info/www/bejne/jH_Rfap-Yr9rqpI Its solid. here he is building it.

[@MyJerome26]

Anthony Romano i

[@paulmcfadyen689]

Anthony Romano that door is made from idigbo. I would recognize that horrible yellow dust anywhere. Catches the back of your throat and can have a smell of cat pee when cutting it

[@lukasochola576]

That door is not mahogany

[@odaineroberts2552]

I like the designs on the concrete column outside looks superb

[@pradeepsahani3678]

Very nice 👍

[@GoTv-cc5ot]

Brother LOVE FROM 🇵🇰 ❤

[@tuanmanh9717]

Bộ cửa rõ đẹp. Nên lắp khóa mầu đồng. Có lẽ sẽ đẹp và trông sang hơn.

[@congtuhotrinh7520]

Lắp khoá đag non lắm

[@govenorprince9058]

Great work

[@richardesquibel4222]

That's some pretty quick work. good jobs, the funny part wearing slippers.

[@rameshbhujal3648]

Replies

[@avrarsingh8466]

nice Door WooD 🔨✏😍

[@alolipa]

The lack of tools is amazing

[@Scousey]

What lack of tools? He has everything that he needs

[@tedchemay5331]

A real butcher !! Even left scratch marks on the outside and inside face of the door where he marked it. Some amazing excellent skill alright.

[@globeforever9777]

As the title says "Carpenter" what do you expect, its a job for a joiner not a carpenter.

[@lukasochola576]

Is there a difference between a carpenter and a joiner am learning

[@globeforever9777]

Good question and you may get some argument over this especially from our American cousins who class all woodworkers as carpenters. Yes there is a difference although there is some over lap in certain cases. A carpenter usually works on the structural timber in house building, roofs, floor joists etc a simplified way to look at it is everything (woodworking) before plastering is carpentry and everything after such as skirtings, fitting doors, kitchens is down to a joiner. There is a sub division called a shop joiner who's job is manufacturing doors windows etc in a workshop. Another wood related trade nearer to a shop joiner is a cabinet maker who specialises in finer woodworkig techniques which would include furniture making etc.

[@francisconascimento2034]

Very good fantastic Brasil

[@robiulajmol251]

Please help me with a nice clear picture of this door..

[@tommyGeylang1637]

Pls buy and use a Jig , it's so much more accurate and professional then free hand screw , router

[@youtubeuser2372]

Excellent skill 🤥

[@user-dg6rs7wv9k]

Hello I'm Thailand 🙏🙏🙏

[@shehzad59malik3star2]

I am carpanter but i like u

[@brownwarrior6867]

The easier a tradesman makes things look the better they are at doing their job. I just installed an external door and fittings for a friend having never done so. It’s not as easy as it looks and definitely way more difficult without a router. Especially on hardwoods like Mahogany or Oak.

[@user-nz8zj4ji9s]

Инструмент вместе с мамонтом откопал ,но безопасность на первом месте в маске работает )))

[@MrReeple]

Сразу видно узбеки в деле)) дрель и стамеска по наследству от дедушки досталась. Был бы фрезер то уже в Москву убежал бы две ставить😂😂😂

[@houstonwellfort1360]

Too bad that his not using full mortise machine, 5 min of work and professional results.

[@kryptoniteee]

Houston Wellfort tell me more. When can I buy such a machine?

[@giedriusdyra1242]

I like his safety shoes :DDD

[@shotgunj1]

I agree with greg the face plate should be screwed on for pe fit and cut around with sharp knife makes chisel out perfect

[@jorgecobacohuo2635]

Buen trabajo Felicidades!!!! Yo también soy Carpintero.calificacion un 10. saludos desde Cancún México.

[@jorgecobacohuo2635]

Es una cerradura de 3tiempos. saludos desde Cancún México

[@berthalopezreyes3648]

Sera mejor usar el ruoter para hacer el rebaje de la contra de la chapa y las cajas de los pestillos tambien para el cuerpo de la cerradura se hace mejor con el router el rabaje y se termina con un formon bien afilado saludos desde sinaloa

[@gadogadochannel00]

Nice work

[@AH-le3py]

Remember this is pure solid wooden door.

[@suranderjangra7440]

Good #skwoodcrafts spot

[@AliAli-vl9lu]

Very good my dear prince.

[@richardwhite3829]

Amazing that it wasn't more scratched up or more gaps buy some tools

[@stvdmc2011]

Why bitching, dude got the job done.

[@user-fl9cx5xj6w]

Beautiful

[@TheAlpine49]

Primitive tools but a pretty good job I guess. Not amazing, but better then me.

[@ghostmedic86]

I was gonna say there's too many critics and that he did a good job, UNTIL I saw the finished product, and the critics are correct. Why did he expose the strike plate?!! Ugh...

[@sennentheodore35]

What is the amazement

[@skfeni8168]

nice

[@schuur10]

Lock plates have the function of covering the cylinder lock for the outside. This hobbyist has too long a cylinder lock for a too thin door. A pipe wrench can now be fitted to the protruding cylinder lock. A full turn will break down all the brass mechanism, and the door is open!

[@user-qk1su5yx9s]

مغربي مر من هنا 🇲🇦🇲🇦🇲🇦🇲🇦🇲🇦🇲🇦

[@WV591]

yes buddy. screwed up that section of the left door under the plate. the gap sticks out like a sore thumb.

[@omsaicreations1962]

Amazing

[@suranderjangra7440]

Good #skwoodcrafts spot

[@anjelusbiswas5190]

Beautiful curving door .

[@firozkamarudin]

a plunge router would have given a crisp and clean cut

[@raymondpiper8294]

42 yrs a carpenter.....only use a lock jig nowadays , as u said nice machine finish.

[@damesiojones46]

Someone always has to hate

[@roydl8536]

damesio jones .... is not hate, is just reality

[@PedroGonzalez-yn8mc]

Good job

[@alternative6877]

damesio jones it has nothing to do with hate, for proper tradesmen it’s what you do day in day out, but of course for someone who is not in this field might look something special. Take it easy 😉

[@WoodLink1]

Skilful person made it seem so easy.

[@Aluminiumclasses1704]

kzbin.info/www/bejne/omGcfKuggNysetk

[@marito242]

If you think this is a”amazing “ clearly you can’t even change a Light bulb

[@myheart9210]

very very good

[@luannguyen3797]

Bạn lắp tay khóa hơi cao,lắp tầm 95-90 là vừa

[@CHV1257]

Very good

[@luizarias2658]

Nice handle job

[@joshiwaraneo]

use router much easier but this is a good for teaching beginner because i learn using router then when the router is broken i have to use drill but my drill skill is terrible..

[@paulv7217]

I guess they say he is good with less than the right tools

[@paulmckeighan7361]

Ive also never witnessed this guy actually use a tape measure level or speed square

[@user-ei6vq3lm4f]

Спиливание язычка на встречной накладке добило окончательно.

[@achmadsupiadi7795]

Mantap juga... boleh pesan satu untuk saya

[@saabsurinder5203]

Very good job

[@tanveerkhan9221]

Nice door crop lock

[@njrcolne]

He was wearing a mask two years ago

[@benmakepeace5759]

Amazing Excellent?? More like not bad but not good.

[@kendu5636]

He’s a hack. The guy who carved the door was who we should be impressed with.

[@BandamameDkhar]

Its a machine who carved the door

[@totocarpenter8598]

That's awesome 👍 I'll try to make it and I upload my channel soon 😊

[@HoangAnhTao]

Lúc chốt cử lên đục lỗ khoá chước sau khi dạo xong chỉ việc khoan lỗ tay cầm và ổ khoá cho nhanh bác đanh dấu chưa chuẩn lên phải dùng đục chỉnh sửa rất lâu

[@sangamtamang4158]

Thanks for help

[@user-kj1cd4ej8l]

Работа на отшибись, тело замка с перекосом в одну сторону, декоративные панели тоже с перекосом установил, ну и вцелом конечно работа на 3 с минусом из 5

[@jait2024]

Nice door but standard work. Apart from using a bit off wood as a hammer

[@oldgriff8559]

Being a joiner for 45 years I find this insulting to those of us with a real skill level ..that guy's no more than a butcher.. Nothing amazing about that ..😂

[@rsharpe1985]

Griffo Busa 1340 a joiner lol 45 years and on here using emoji‘s😂 I call bullshit!!!

[@300leothelion]

robert sharpe I’m a joiner of over 31 yrs and I use emojis and call bullshit on the skill level. 😀I can get my 18yr old apprentice to fit locks more tidy than this oriental chap. . Too big a gap on the sash lock and the keep. Also the handles should sit central to the stile. Not so close to the edge of the door. Notice his drill bit smoking? That’s cause it’s blunt. Nothing in these countries is classed as good quality in the West. We frown on their tools and practices. Don’t come back with we all use Chinese tools cause the invention comes from the West. Hopefully after the corona virus nothing we buy will come from China.

[@Kris-st7cx]

Why does this have so many likes. If that was my house then that guy would have just bought himself a door.