Nice Tutorial mixing Part Design with GSD. Fun to draw, too. Keep up the nice work.
@hms16882 жыл бұрын
Good work!!! We also have rich experience in sheet metal fab, we are a strong manufacturer in China, with high quality and competitive price.
@philippatton66914 жыл бұрын
Part Design also has Multi-sections Solid that can be use in the same way that Multi-sections Surface is used. It eliminates a step. I did not create Sketch.3 and Sketch.4 and just used the surfaces as another user suggested.
@workbenchstuff4 жыл бұрын
I don't remember if I managed to model the part with Multi-section Solid, it's not exactly the same, I'll try it anyway, thx
@3DComparison Жыл бұрын
Great video! I have noticed that many users have copied your designed part (consider to update your video tags/keywords as this is not a top listed video for CATIA twisted part). Even the 2D drawing you created for this video has been reuploaded by other KZbin accounts! I have addressed this within my most recent video introduction of a video where I presented a workflow that can enable multiple twists within CATIA V5 (using Imagine & Shape paired with 3ds Max) which has some advantages but also limitations compared to Part Design / GSD workflow presented by you.
@workbenchstuff Жыл бұрын
Thank you !
@bobajob84855 жыл бұрын
Try it in generative sheetmetal. The twisted surface would be a user defined surface. Once complete the model will unfold flat. Very useful for the toolmaker.
@workbenchstuff5 жыл бұрын
can you help me with a video tutorial ?
@VAGUSALIUS2 ай бұрын
👍👍👍👍👍
@boshanan12 жыл бұрын
Thank you very much.
@PappaBear_yt4 ай бұрын
Very helpful, although somewhat hard to see details on mobile phone screen! Thank you very much! 👍🏻🙋🏼♂️
@workbenchstuff4 ай бұрын
Sorry about that, please use a laptop or a monitor, there are many details you may miss !
@PappaBear_yt4 ай бұрын
@@workbenchstuff It's OK, the videos are very well made!
@-AishwaryaKadam4 жыл бұрын
Please provide instructions. It’s really difficult to figure out what is been done for users like me new to Catia.
@workbenchstuff4 жыл бұрын
What kind of instructions do you need ? :O The video tutorial is done very slow to see the icons, planes, edges etc. If you are indeed a beginner I suggest to watch many others tutorials before this on, it is not for the first level of CATIA knowledge.
@-AishwaryaKadam4 жыл бұрын
@@workbenchstuff The video is really amazing itself and yes it is slow but the screen isn’t clear to see what tool is being used. A voice instruction would be really great! That’s all I wanted to say. Thanks anyway. I’ll surely look at my basics before.
@kruldaj5 ай бұрын
Hi, it is much better and faster to use a multi-section solid ;-)
@rosembergw.deandrade8432 жыл бұрын
Very very very nice!! Great video. Thanks!
@workbenchstuff2 жыл бұрын
Thank you very much! Please be sure you subscribe to my channel and to take a look on other video tutorials.
@muhammadhakimnasaruddin32614 жыл бұрын
It is a good video, but please make a voice-over next time 👌🏼
@workbenchstuff4 жыл бұрын
no voice because: i am not a native english speaker, the video is explicit enough and adding voice is not necessary, I use the tutorials with my students in class, so it could be a real mess to hear my voice from 20 computers..
@lucapatriarchi77603 жыл бұрын
@@workbenchstuff you could use the translate program's voice if you like to realize a voiced video
@saury17655 ай бұрын
Thanks ❤
@hulkaplasta6558 Жыл бұрын
very nice brou
@workbenchstuff Жыл бұрын
Thanks
@bortecinegunay41 Жыл бұрын
the bodies relative positions as well as their contacts are ambiguous. how fix to the reason? URGENT
@workbenchstuff Жыл бұрын
Sorry, but I don't understand your problem. The video is very clear and the part is smooth.
@cadcaetutorial20392 жыл бұрын
nice vidios sir
@varshabgowda31864 жыл бұрын
Can you please make a video of propeller rotor blade using symmetrical airfoil in catia
@workbenchstuff4 жыл бұрын
do you have a drawing ? usually i don't make video tutorials on request, but i may take a look
@dmytrosurganov23053 жыл бұрын
I think it should be builded in a sheet metal, isn`t it?
@workbenchstuff3 жыл бұрын
it should, but I dont know how to obtain it in that Sheetmetal module :|
@IvanIvanov-lo6lv5 жыл бұрын
Hello, I'm interested in what exactly is the purpose of the ‘replace closing point’? When and how it is used? Thank you for the time!
@workbenchstuff5 жыл бұрын
we close the surface using some pairs of points, these points should be placed in corresponding positions; please refer to the official CATIA v5 documentation for more info
@joseluisMartin4 жыл бұрын
the purpose of replace points is to avoid cuspide, the "closing points" should be at a similar location on both of the section profiles
@subratmangaraj32974 жыл бұрын
nice sir..
@Mzolfi4 жыл бұрын
Nice work
@wazumult3 жыл бұрын
Yo dumb question but how do you quick trim multiple lines in quick succession (like at 2:27)? When I do it after trimming one line I have to click on the Quick Trim Icon again to activate the tool. Do you have to hold some key down or something?
@workbenchstuff3 жыл бұрын
yes, i double click on the yellow rubber, after trimming i click on it again to deactivate
@cadcaetutorial20392 жыл бұрын
super sir
@maximedupre80435 жыл бұрын
I would have done only one spline, then a rectangular extrusion following the spline
@workbenchstuff5 жыл бұрын
try it, i dont know if it works
@satyamsingh91674 жыл бұрын
No audio, pointer is also not visible sometimes.. little difficult to understand
@workbenchstuff4 жыл бұрын
no audio because there is nothing to say, the video is very explicit, done cery slow to be easy to understand, please view it on your laptop, of course the cursor is not so visible on your phone
@satyamsingh91674 жыл бұрын
@@workbenchstuff okay, still some improvement can be done, u can stop your pointer at the icons for little log so that we can read it's function, also adding voice would be great..🙂 overall nice video 👍
@workbenchstuff4 жыл бұрын
yes, in more recent videos there are some inprovements, I made the videos slower with stop on icons
@satyamsingh91674 жыл бұрын
@@workbenchstuff great 👍
@vinayakbongarde71153 жыл бұрын
C chanel bend in catia v5
@gman59865 жыл бұрын
When I open Multi Section Surface and Pic the 1st sketch its selects ok but when I try to pick the second sketch nothing happens. It will not allow me to select the second sketch. Can you provide any help with this?......thank you
@gman59865 жыл бұрын
I got it sorted out. Sketch was the issue
@RolandGaenssler5 жыл бұрын
@@gman5986 The sketches 3 and 4 aren't neccassary. Just select planar surfaces which he uses for the sketches.
@giosadunishvili81143 жыл бұрын
Looks like this - 1J0 711 183 D
@RaymundoGabriel3 жыл бұрын
Everything fine until I reach the last part where we join with the pathways. My catia is in german and don't know what to select in the endpoints.
@workbenchstuff3 жыл бұрын
Change it to English from the menu Tools -> Customize -> Options
@tpkam84045 жыл бұрын
sounds good
@tpkam84045 жыл бұрын
subscribe TPKAM as well
@vincentr41815 жыл бұрын
Bonjour, pour une pièce pliée ce n'est pas selon moi la bonne méthode, créer une surface de la pièce puis l'épaissir est une approche plus réaliste.
@workbenchstuff4 жыл бұрын
hi and thank you for watching this video tutorial, please, can you provide a more appropriate solution/video tutorial ?
@erichou8284 жыл бұрын
谢谢,很有帮助
@imrrrsharma4 жыл бұрын
Let the catia 3d model done, then after that how it use to cast that tool??
@workbenchstuff4 жыл бұрын
i am not sure i understand your question, this part can be made using plastic deformation
@mesutyilmaz10425 жыл бұрын
pratical solution and commonly ı will use this way :)
@bb2_tr5 жыл бұрын
Merhaba, makine ressamı mısın?
@hirdeshsingh86162 жыл бұрын
hlo im interested in your drawing so can you tell me about shape designe
@workbenchstuff2 жыл бұрын
I am not sure I understand your message. Please take a look on my 200+ video tutorials and you'll find for sure what you want.
@premsagar.m5 жыл бұрын
Any idea on getting a job after completing a certification in CATIA, pro-e, hypermesh and AutoCAD Everyone says it's got scope and I see none. At the Same time companies expect 5yrs experience on the other hand no one is ready to give an opportunity to a fresher.
@maximedupre80435 жыл бұрын
Depends where you live, and if it's only a certification and not a diploma. But you clearly can find a designer jobs mostly anywhere, you'll have to earn trust to get big tasks
@sawomirjasinski21974 жыл бұрын
TRUTH
@malikammad92125 жыл бұрын
both ends are same,why you draw separate !? create one and copy and rotate it...!!!!?
@workbenchstuff5 жыл бұрын
sure, i could do that, thx
@Haaitar5 жыл бұрын
Hello, I have a question: do you have a license from d'assault systems or is it a cracked version? Knowing the prices of Catia licenses it is just curious...
@gman59865 жыл бұрын
You don't ask a question like that on the internet!
@joelvale38875 жыл бұрын
10,000.00 Dollars.
@13D00_5 жыл бұрын
The student license is 100eu and has the complete package. The only limitation is that you cant sell your designs as they are limited to other student licenses. In October Dassault Systemes give the student licenses away for free (When you apply and can confirm you're a student.)
@gman59865 жыл бұрын
@@13D00_ Would you happen to know where I can get a student license in California,USA ? Thank You.
@13D00_5 жыл бұрын
@@gman5986 yeah I think it's worldwide from their site? Not sure tbh
@jimzeleny721310 ай бұрын
You realize the last line on the profiles is not constrained.....
@workbenchstuff10 ай бұрын
indeed, but this is not affecting the 3D model, just constrain it when you draw the sketches
@ПётрГарин-е2ъ5 жыл бұрын
При любом варианте построения детали в Solidworks, не совпадает конечный объём и общая площадь поверхности детали построенной в CATIA. Вот такая вот нестыковка. Какая то программа безбожно врёт!
@jeslint88074 жыл бұрын
Thanks. I have some issues with my model. The edge of my bend is not on tangent with my part. Any help would be appreciated. Can i send you a screenshot ?
@workbenchstuff4 жыл бұрын
watch the video again carefuly, at some moment I select an edge to establish the tangent, please do the same
@mohammadbahador68914 жыл бұрын
Goooooooodďddd
@vladimirpotanin32584 жыл бұрын
Hello, I don't use my CATIA platform much! If anyone wants I can give it away for exercises or training!
@albeblade26914 жыл бұрын
I'm interested. Do you have still have it?
@kartiklambole27724 жыл бұрын
Nice.#DESIGNMANSION
@ZawilChannel5 жыл бұрын
good
@Zcorberprofile77464 жыл бұрын
I think draft part should have hidden view
@workbenchstuff4 жыл бұрын
why's that ? the views are enough to understand the model, even without the isometric representation. I am of old school, really learned CAD in faculty 🙂
@Zcorberprofile77464 жыл бұрын
@@workbenchstuff i also learned most software from solidwork to dellcam
@ayoubelamrani8685 жыл бұрын
Hello can i get the file with all these parts ! Thanks a lot btw for your videos :D
@radouaniloqman54664 жыл бұрын
If you wanna this piece you will find it in my channel
@YuriNevedrov3 жыл бұрын
I did the same thing in SolidWorks 2017 and much faster.
@workbenchstuff3 жыл бұрын
well done !!!
@Priyanka-er2mb2 жыл бұрын
No audio
@workbenchstuff2 жыл бұрын
there is no voice, what do you want to hear ? isn't the free video enough ?
@tegmentoo5 жыл бұрын
hi how to make this in fusion 360. thanks
@ajamit0075 жыл бұрын
Use Interpolation Spline in 3D Sketch Tools for connecting between 2 Solids & loft using Interpolation Spline as Rails..
@tegmentoo5 жыл бұрын
Thanks for answer,buti try that it create just like 5.32 in this video. Too much bend at the center point and too thin. İn this video fixing it at the last step(6:00). But i cannot fix in fusion 360
@saicharanchalla75705 жыл бұрын
@@tegmentoo constrain the sketch at the ends exactly
@هنريللكترونيات4 жыл бұрын
Thank you Ergul send program
@radouaniloqman54664 жыл бұрын
If you wanna this piece you will find it in my channel
@BAkshayMoze3 жыл бұрын
Hey do it slowly ur speed is at high level
@BAkshayMoze3 жыл бұрын
Nd add Ur voice in it
@prof-stancescu4 жыл бұрын
The same part modeled in Autodesk Inventor - here: kzbin.info/www/bejne/f2HdpGx3bt-La6s
@michaellafleche84895 жыл бұрын
Here is the Onshape Document on the construction of this: cad.onshape.com/documents/196e76c1cdfa62dae6396e17/w/cd1b1357e6fb84472437cebc/e/9452fe3cd7f091676b4e1b16
@ashmodi0075 жыл бұрын
Please create the same on PTC Creo and upload the video
if you don't add the voice...You get zero marks....Understand bro
@workbenchstuff4 жыл бұрын
i am not a native english speaker and...what to tell more than it is already in the video ? do someone needs to hear me saying "select that point and draw a spline tangent to... " ? what do you mean "zero marks" ?
@quotesdose_off3 жыл бұрын
204k views means people finds it uselful.. "Zero marks" .. who cares..😉
@fromuralmountains4 ай бұрын
Not the best and not ideal geometry in truth. Non-uniform thickness at the bend spoils the whole picture.
@workbenchstuff4 ай бұрын
We are waiting for your video tutorial to see a better solution.
@fromuralmountains4 ай бұрын
@@workbenchstuff maybe bit later in nx
@Lordcirdan5 жыл бұрын
1:33 Si esa parte es idéntica a la que ya izo, para que la dibuja de nuevo? ja ja jaaaa