Working Perendev Magnet Motor!

I've been seeing a lot of these videos with so called "free energy" and "infinite energy" motors and I was very curious. I saw it was still up for debate and I couldn't really find a clear answer. So, I did my own project and experimented and the results are very interesting! Comment below what you think!

[@TGiFoosday]

Great job explaining the operating principle and why this design does in fact work. For a hand made unit, you did very well. Now imagine everything perfectly shaped, balanced and running in a vacuum to eliminate the air drag and away she goes.... Thanks for making this video for us.👍

[@thilovonstillfried6278]

"Eliminate air resistance in a vacuum" , what kind of bullshit is that?

[@TGiFoosday]

@@thilovonstillfried6278 What part of that you don't understand? And watch the language.

[@thilovonstillfried6278]

@@TGiFoosday The Perendev-"Motor" doesn't work, never. It's all fake. Tell it Elon Musk, Musk is waiting for such a motor that doesn't need a battery and has unlimited range. Why don't you offer it to Musk? He has enough money, he would invest. But Musk will only laugh derisively.

[@VEC7ORlt]

Or what? You'll get angry or something?

[@thilovonstillfried6278]

Sorry, these "intelligent" words are not from me 😜

[@rigamortisraiding3264]

I'm with you. this type of engine could really work. yeah theres the principle of conservation of energy, but thats only an explanation that fits the most on the "physical questions". In the past, people were convinced, that the earth is flat, till someone refuted it. Or just think about Albert Einstein. He was thinking out of the box and so he opened a new way to see the galaxy e.g. and so we should! Think big ;)

[@carlcap14911]

This is definitely going to happen in the future for practical applications. Right now experimenting with magnetic properties is only going to improve the end results. Keep doing what you are doing and when it is perfected, you can apply it to a practical solution.

[@JustinP117]

Thank you for your time and effort making this project and video. And I would also like to thank you for discussing the conversion of magnetism to usable electricity I've been in countless conversations attempting to convey that with little to no success. It was very refreshing to hear it from another like-minded person.

[@onehitpick9758]

It seems to spin better when the magnets are not around it. I think that's what's been holding this thing back all along.

[@frankpitochelli6786]

If you can get the center drum to balance where it is spinning without any resistance, you may find that will aid in the spinning and it probably will spin much longer, it looks out of round just a bit which will cause the drum to loose rotation and slow to a stop much faster.

[@johnkemas7344]

Use of very low friction ceramic bearings would help- pricey though.

[@arkadirabaev2901]

Good project and finally someone shows the buildup in detail. Please continue improving the motor and sharing your results!

[@randallcromer66]

Great video, I appreciate all your time and effort in making this device and the video. Thank's for sharing this with us and I hope you will continue doing this kind of quality videos and I think you are on to something that if you can keep working on it and refining it just might work. Hopefully you will keep us updated and informed on everything because I enjoy watching you and learning about this kind of amazing technology. So please keep up the AWESOME work and I'll keep coming back for more and sharing your video's with as many people as I possibly can. 👍💯👍

[@dottielensset7138]

What if you were to install a hand crank on the end of the rod to give it a start? Wouldn't that be better than using your wrist? (A crank like the old cars used which I believe were removed once motor was started.) Perhaps some kind of spring mechanism? Even wrapping a rope around the shaft to pull start it might be better than your wrist. But thank you for showing this. You did a fine job in both production and explanation of how your product works.

[@gowdsake7103]

ITS a FLYWHEEL !

[@kysteelworker]

You are helping it along somehow with your right hand. Both times it started slowing down as soon as your right hand came back into view.

[@CrystalAge]

Good job brother! I’m right there with you, there is no such thing as free energy but magnets can be harnessed. Consider the attraction between magnets to be an escape velocity. Once you overcome that, you have “orbit”

[@mac7825168]

This is a very good prototype...and I've seen other similar designs. One thing to consider when using aluminum materials for your base structure though. Even though it is non-magnetic, the induction of an electromagnetic field through it may induce an opposing field (although much weaker than iron) which reduces efficiencies (by how much is speculative). Keep going though....tighter tolerances, better balance, stronger magnets....it all counts for an improved end product. Again, great job!

[@louishackett5342]

8:39 That's the exact moment you used your right hand to externally power the shaft with, probably, a small motor.

[@excavatorfun6265]

yeah just a youtube fraud trying to make money on his channel

[@tiganusconstantinrazvan3946]

i don't think that , is about inertia of rotating objects that sliding in rotation on magnetic fields and slow down en.wikipedia.org/wiki/List_of_moments_of_inertia think if this could be rotated in 0 gravity and the rotor could have 4 magnets (2 on the rotor and 2 in extremis to sustain the rotor ) and you could give some rotations moments when will slowing down to compensate so to restore initial velocity .. you could have 1/2 of a perpetuum mobile generator with a calculated consumer by a formula(you could find out by experimenting in time and evaluating the power forces of the magnets,the rotor's speed ,the output energy obtained,the compensate energy losses to restore the rotation,...and other variables i do not know at the time: i don't experimented)

[@DaVeHiLl200]

Lads it's physics and is 100% possible and he's on the right track. The only problem with these motors is they aren't likely to produce enough power to run anything other than flywheel which would actually assist the perpetual motion, making the resistance of the magnets less and if the resistant sides if the magnets were shielded that thing would only stop if you physically stopped it. I'd put my life on it. The resistance of the magnets is the only hurdle 👍✌

[@NTF-zb9wi]

I've done my share of playing around with hard drive magnets; &, given what I've seen them do, this seems very plausible to me. The kid seems to be on the right track. When the weather finally gets better, I'm probably going to try playing around with something like this. Even if it were to just run fan blades down in my "mag shack," it'd be a handy little contraption... If (by scaling up) it would turn the rotor for a stator/rotor motor I'm also wanting to do a few things with, that would be even better. {shrug} Some folks are just conditioned to keep thinking "inside the box..."

[@andreasschmitt2307]

It's obviously a bullshit contraption and everybody here is like "he's on the right path!" :-D

[@Totes_ma_Goat]

Well he answered his own question! There’re laws of energy. It is always good to keep an open mind though and not let others discourage. Great things are found by those willing to question things and grow in knowledge. Plus it’s not like there’s anyone out there that knows everything!

[@joshhoy-burbank7660]

You sir have found exactly what I have been working on and theorizing to work with not having the knowledge to create it the idea I had is the same. Thank you for the info. It does exist it is possible and now I have something to work with to get the rest of my ideas going.

[@greatoak7661]

Dude! You are AWESOME!!! That is a beautiful creation, well done explanation, and the video is well done as well. Thank you, this is the video I've been looking for that explains it so well.

[@gowdsake7103]

It doesnt work DORK !

[@AffordableWind]

nice prototype work , i noticed a lot of trolling i experience the same thing , i seen someone said a motor was connected to the shaft on one side but i didnt see anyway to connect a motor to the shaft , next they will say there are batteries inside , i like it , good research

[@lonnyeachus3825]

If it "does slow down" eventually, it's not "sustaining itself". It's not a motor, it's just a very efficient gyroscope.

[@raphanunu6912]

Not that efficient !

[@dtracey8893]

you can see the movement up and down. which is use of kinetic energy. also the other imperfections like the bearings and gravitational forces on the rods that would slow down. to improve it there coudl be more efficient bearings and change if possition as well as better more effective fabrication

[@davidherman5142]

Enjoyed your presentation and appreciate that you are not trying to convince us that this will run "forever."

[@TheWhoost]

Holy shit it looked 3d printed until the MDF was shown. Good craftsmanship!

[@samuelfloyd5072]

It’s totally a success. I am very impressed at how close you got to unity. Now you just need a power input and you will have an exceptionally efficient motor

[@tubularguynine]

I believe a 'power input' would not only be impossible, but would also defeat the purpose of 'free energy'.

[@augustoironside3256]

​@@tubularguynine but would be more viable with a powe input

[@tubularguynine]

@@augustoironside3256 - Perhaps you don't understand the difference between 'permanent magnets' and 'electromagnets'. Since the only reason to apply electricity to a motor is to turn the copper wire windings in the rotor INTO a magnet. And since 'permanent magnets' are magnets already, no external electricity is needed...or possible, because the individual magnets aren't connected to each-other, and therefore, can't complete a circuit. All that's really needed to make a magnet motor work is to shield one pole so they all repel each-other and not attract...and that can be accomplished using 'mu-metal' as a shielding material. There's videos on shielding.

[@AffordablewindturbinesOrg12345]

nice prototype work , i like it and good research , work on it refine it and start a business , we use similar technology for magnetic assist on our wind turbines , so it is viable for that at-least now in the future it will be different

[@stilllife4u]

People think your trying to pull off something fake .But that will take a lot of energy to try something fake .What would be the use . Keep up the good work . I believe it can be done .One day all the smart asses will be kicking themselves in ass.

[@johnkemas7344]

You are correct- total maximum output power as kinetic energy , motion, and frictional losses etc can only be equal to the total amount potential energy stored in the magnets and the amount of energy you imparted to the machine when you spun the shaft. You can easily do this in space under 0 gravity too, but in space there are almost no friction inputs and the laws of Inertia keep the object spinning until acted upon by and external frictional force. Motors like these can spin themselves for awhile on the planet but they can produce very little usable HP output and not for long. Your model could run longer if the rotar was totally balanced and you used very low friction ceramic ball bearings. In space you could consider this a potential energy (stored in the magnets) powered gyroscope, it would run much longer but can still never do much useful work!! But the laws of inertia would keep it spinning for ever if no losses, drag, friction etc was there to slow it down. But you found out that as soon as you upset the spinning rotar with movement of the system, you have imparted enough frictional losses to the inertia of the rotar +plus the power from the repulsion of the magnets to drain the system of some of its' power and it will stop. The amount of power you drained with your movement was exactly or close to it the amount of energy you had to put into the system to get it to spin. Hook up a variable frictional load to the output shaft and you will quickly realize perpetual motion machines can't exist!!

[@ThomasDwyer187]

"eventually it does slow down" no additional energy going into the system, but energy is being dissipated/consumed/lost

[@causwayspeedway]

At least the young man is being honest,it will eventually slow down prolly due to magnetic flux?

[@thermionicemission6355]

@@causwayspeedway Lol, this is just another liar for views, he is not a "young man" or "honest" he is a scumbag who did a good job at acting like a good individual.

[@davewhitegas2415]

Young man, I don't care what anybody say's, I have been an electro-mechanical engineer and a machinist for quite some time, gotta say, you did a good job. You put a lot of thought into your design and in the end, your hunches and work paid off. You look to be a rather young man but what I am getting to is, I bet you will go a long way in your research and development of bigger and better designs. Keep up the good work. God bless

[@FreeMind5094]

With all due respect, revisit your freshman year's Thermodynamics and Physics, so that you can reconsider your stand on this..

[@charlesnelson8458]

little minds always stand in the way and call others lier because they do not understand. thank you nice presentation

[@dy2320]

Hey everyone! I really love the discussion that's been happening on this video. Show's that the topic is alive and well!! I can't believe this video is almost at 1,000,000 VIEWS! That would be incredible if we can make it there! Who knows what surprises could come if we make it that far! =) Thanks again for all the support. Spread the word and keep this topic alive!

[@mac23skidoo]

If electricity creates magnetic fields, then magnetic fields create electricity. If there's enough potential energy in a gallon of gas to run New York City for a year, then how much potential is there in a magnet? There's a formula for it. Throw a rubber ball in an octagon in Space and see how long it will bounce! Magnetic fields make great batteries because they're dipoles, just like batteries are....but now they configure monopoles by placing dipoles in a pattern which cancels the chosen pole. Then, two North poles in proximity provide repulsion with NO SOUTH POLES TO INTERFERE! No attraction to cancel the monopoles! Simple, really

[@frequencydecline5250]

"For the sake of the video I'm not going to let it run a huge amount of time" "You can see that it is sustaining itself." 12 seconds later, "eventually it does slow down." LOL

[@drpk6514]

There are a number of patent in this regard. Yes it is conversion of magnetic energy to another. Remember Earth has been moving around for Billions of years on a similar energy (gravity).

[@ricardomontalban6004]

If you can’t see this if fake you are a mongo

[@kguidry7520]

@@drpk6514 There are patents for all sorts of reasons and not always because the ideas represented work. If this "worked" it would not slow down. It does slow down because no further energy is applied to the system. If you try to extract work from this system, it will stop quickly. Therefore, it does not work even if there are patents for the idea. There are no frictionless bearings. They will always generate wasted heat because they are always working... which always extracts energy to do the work.

[@Name-js5uq]

Says Ricardo montalban

[@rogerd4559]

it is not a well made motor but it does run for quite a while

[@rickyfranks8163]

Man that's awesome work. Keep going with it. Progress progression is what its about. Refining your design building better units. Keep the hunger for perfection and you will achieve it. Fantastic man can't wait to see your future videos.

[@JF32304]

Some people have no imagination. the reason why (after a certain RPM) it's sustaining. The reason is there's enough inertia built up to get it past the cog and continue rotating. nice work man!

[@operarioanderson7981]

"When excessive skepticism takes over and blocks a person's mind, there is no room in the mind to think how things can be done in an innovative and different way and to create new solutions to various problems." (Rosenfelden)

[@rogerd4559]

three D print it please! perfect it

[@aaronbuckmaster7063]

I like what I hear. People like you who think outside the box, are the difference between success and failure. Keep moving forward, making prototypes of your designs. If you figure out how to make a magnetic powered motor that can produce enough torque to turn a generator, then you have something. Adding batteries for energy storage, then you have something more. Further development for increased performance comes next. Your on to viable clean energy production. Do not let nay sayers have any affect on you. I have done things in other disciplines that were said to be impossible. I learned from mentors that did the same thing. Excellent job.

[@ahmadabadi7372]

Thank you for this explanation. You are a giving guy..nothing is hidden. You video is helpful and useful

[@alphapapahern]

Looks awesomely simple and promising. Great job. Looks like you need to resolve your rotor unbalance issue. It's either unbalance or eccentricity. Consider using a small battery powered servo as a starter. Find someway to monitor the speed. I'm curious to see what speed does it maintain and what speed does it slow down to. Remember the more magnets you use the slower the speed. Maybe find a way to disengage the other magnets to only 8 or 6. You would have to have a reliable setup, my theory, if you want to go to 4 or 2 magnets. Again nice setup. Good luck!

[@raphanunu6912]

" Remember the more magnets you use the slower the speed. " How do you know ? What's the explanation ?

[@Waltham1892]

Congratulation, you've invented the flywheel.

[@worldoftankblitz6743]

lol

[@jimjakosh2506]

That is very interesting and thank you for the drawings on the magnet placement. I made mine straight in and it does lock up when it slows down and the N/S come opposite each other. I only have one rotor, though.The round magnets I have are n &s on the ends. if I mounted them like in one of your drawings, they would have to lay in sideways. is that they way you did it? Thanks, Jim

[@jadug3305]

That is really cool. A machine shop version with precision engineering and high speed bearings would be interesting. Turn it into a magnet driven gyroscope

[@TheBdd4]

Check the increasing and decreasing sounds of rotation after 9:25 or so.

[@AgustinDeAngelis]

been cut the video.

[@victoryfirst2878]

I have noticed that magnets that are purchased on line have a great deal of manufacturing tolerance allowance for the magnetic field. That is probably the reason it sometimes catches and sometimes not. My two cents worth. Hope that helps. Keep up the great work with explanations too.

[@wills242]

Ahhh, I wonder if any suppliers specialize in exact measurements of power

[@victoryfirst2878]

@@wills242 Do not really know Bill bob.

[@ramvan2284]

I don't care if its sustaining or not... its really cool and you made it work. I hope you go in to invent something that goes to market that can produce. Good luck.

[@idacow8237]

nice job of getting it to work on the "second try" where you've moved the camera closer and hidden the battery somewhere out of sight of the camera

[@MrClaypogue]

You have a tiny Fly Weight on there why not use a Ultra weight flywheel 10x 15x 30x the weight of the rotor once it spins up and "Catches" as you say centrifugal force and weight alone should be able to keep it running far longer that what it Is at the moment Look at some of the old 1800's Diesel motors they were tiny little 30CC Cylinders with a flywheel 500x their weight once it got up to speed you could shut off the fuel for 5-10 Min sometimes longer if they bearings are really good , Expansion, Contraction IE turning it into a Stirling type motor. or if you set it on a revolution counter and every 30th time it cycled it gave fuel for 2 cycles bringing it back up to speed like a "Hit and Miss motor" There is no true Free energy with the right setup you can actually generate electricity for 1/2000th -1/4000th of the average cost Just combine a ULTRA weight flywheel to a hit and miss diesel yes it would be a pain in the Arse to get started but once it got spun up it would be almost impossible to stop

[@offgridjohn871]

MrClaypogue .. yes

[@stevenclovelly]

Just a question - why does your right hand vanish from view in the close-up framing when you get the motor to run? every time? - have you got another magnetic motor running in the background to keep this one running?

[@theunbiasedobserver8875]

Fantastic effort. Would be nice to see a high deff 3D printed version with aligned and balanced shafts and bearings. Bravo!

[@Hal-dq3hz]

Thats impossible coz its fake...

[@kevg3563]

Take your hand away from the top of the stator. People have used those plasma balls to fake videos in the past were you place your hand on the plasma ball and the other hand on the device. Electricity is then passed through your body to channel power into the stator. Also, create everything (well as much as you can) out of transparent material including the surface that you use to place the device on. At the moment I am very skeptical. You have GOT to do the experiment in a more scientific environment (not your bed room) to convince people it is not a fake.

[@laurenceperkins7468]

Even just filming the tour of the device as a continuous piece instead of cutting from one part to the next would aid the credibility a lot. You show that there's nothing under the table, but then there's a break in the video during which something could have been added under the table, etc.

[@vapeplugg2234]

That’s Sam widwiki he learned from Optimus prime he knows what he’s talking about

[@worldoftankblitz6743]

loooooool

[@jamesfacada]

Nice science project. The magnets stacked in certain configurations result in a certain cadence as the "motor" is "jump started" by hand. I can imagine using varying shapes of magnets and varying gaps/spaces between each and varying the # of magnets will all give different results so that's interesting. Like so many free energy motors, this one is again not loaded - meaning it's not being used to drive or work or produce anything. That would be the real test for me. BTW, all the energy that comes from the sun is FREE. It arrives here free of charge and all we have to do is collect it. I believe that to be the ultimate energy source - and it's free - already produced and you were sharp to refer to that as converting the energy. I agree there entirely. All in all, pretty impressive and educational.

[@mattyb5290]

this is awesome!! I wonder if anyone has tried to run one of these in a semi-vacuum. I would guess that it would increase efficiency, but that's just a guess.

[@onemanmob6756]

Yes. Semi-vaacum, tighter tollerances, balancing, aero fill holes with epoxy and smoothen on a lathe... There's room for improvement. I wish he hadn't given up on it... 🥴

[@WaveJay23]

That is not a guess that is a fact where did you learn this

[@WaveJay23]

You can make a jet helicopter from 4 vacuum motors

[@patriklindholm7576]

"Eventually it slows down...". You're done.

[@_John_Sean_Walker]

All bedroom machines are just dreams.

[@MLBYERZ]

Patrik Lindholm He is doing something constructive in making it work. What exactly have you done or accomplished on the level of this project. Nothing. That’s what I figure. I can say that because if you’re out here hating on this guy and what he is doing than either you have tried and failed or you couldn’t even get close to what he has done. Good day hater

[@fidelcatsro6948]

you cant get anything for free...you need to put in some effort energy and try to gain more from another end thats how its done...

[@hermanyoung3600]

Thanks for sharing. This looks very promising.

[@tommyhugh236]

Good job, I think if you build a vane shutter device (like in vgt turbos) for the outer ring to variably direct the magnets in unison, you would be able to operate at variable speeds and maybe even start it spinning. Thanks for your efforts.

[@Ryuuken24]

Cut, cut, hide in plain sight, mislead, works.

[@eddiewardsautogaming9096]

watch the left of the screen between 8:39 and 8:45 you can see the shadow of what he hooks to the shaft he then removes the drive motor at 9:15 disappointed because I know this will work. Its not free energy or overunity because it gets its energy from the magnets I really thought you had it for a second. I will make this work and post a video when I do. People like you take away from things like this.

[@frequencydecline5250]

+Forward Automotive You don't even need to look for any tricks, he says in the video itself, "eventually it does slow down." ....and you won't get it to work, but have fun being another nut lost in the magical world of magnets swearing it will be soon.

[@TitanTubs]

Forward Automotive, good eye man.

[@danielohara2974]

Very nice catch.

[@Bob5mith]

There is no energy in magnets to harness.

[@thesolstephens]

you know what i saw him do something too - what a fucker - make the machine my friend

[@INTIDECUBA]

Don’t worry about negatives people. keep going make your dreams come true.people like you is going to change the word.never stop.

[@mboneajr68]

Thanks, Good analogy

[@affordablehydrogenfuelcell6400]

i like it and good research , work on it refine it and start a business , we use similar technology for magnetic assist on our wind turbines , so it is viable for that at-least now in the future it will be different

[@fam.unterhofer48]

What are you doing with your right hand in 8:38?? :D cheater!! it appears a shadow on the left boarder, so you are going to turn the motor with another motor :D

[@davidbradley3982]

+Fam. Unterhofer yes he leans over to the right as well.......as to do " something "....

[@fam.unterhofer48]

+David Bradley oh I guess, he is producing free energy...

[@jamesstaggs4160]

Ok so if it does run without any outside power source, for how long will it run and (like you said) can you extract any energy from it?

[@metradon100]

In your own point of view, is it producing any useful energy, or would it stop gradually upon introduction of any sort of resistance?? Thank you.

[@glennmr2007]

absolutely brilliant and a sincere effort to replicate

[@vintasalo]

I'll 3D print it, do you have it built in an .stl file? I could do that too

[@geoffreyreeks2422]

Congratulations Smashbrawl94, You have does exceedinly well. Your interests, initiative and scientific mind do you great credit. Regards, Geoff. Reeks

[@dinukasheheranbowattha5907]

kzbin.info/www/bejne/hmOchHePaptjq8U

[@charleylyons7212]

Cool good job! That's how it starts. THINK, CREATE, FAIL, TRY AGAIN.

[@StefanHartmann-hartiberlin]

Please make another video without editing and cutting out parts and show it from all sides, when it its running and go around with the camera all around the device, so we can see, that it is not a fake somehow. Many thanks.

[@davidplowman7286]

all that effort but he hid one end of the motor during trial run...

[@luisluisare4817]

he cant because is fake!

[@ricardomontalban6004]

Yes there is a reason these twats never let you see it all.

[@keithbstar1]

Bull shit

[@zoob7]

They work but are completely useless there's no torque good for f&%kall

[@niente5]

Video shows cuts on crucial moments, just ask yourself why and you'll have the answer

[@sshutupurface8345]

Thinking that the top scientists would not have tinkered with this Idea at any time is absurd, it has no use other than a toy

[@muebermuth]

where do you come from, is it possible to see it by myself catching and running?

[@thesimulacre]

Boy id like to see it "sustaining itself" with both ends of the axle and both hands in the shot. Why leave mystery?

[@quantumleap359]

thesimulacre Simply because "magnet motors" of any stripe are scams. Perendev was a liar, and this goof is riding his coat tails. You can put candy sprinkles on a turd, but you've still got a turd.

[@thesimulacre]

Yeah, most of the "generators" I've seen have had some sort of tricky or flat out ignorance going on, BUT I do find it interesting to find SO MANY inventors engineers and amateurs trying it. In fact, I find it even more interesting that plans for such a thing landed in the heads of a friend and I years ago, and only after intentionally searching it out did we find out it had been tried and tried and patented MANY times and tried and debunked and, well... I think it landed in LOT of heads, as do many "impossible" ideas like Oh, alternating current or microwaves. If we take into consideration that we don't REALLY know how (qualitatively) magnets work, (especially when printing custom fields has so recently become a reality), and we can all admit that a device that generates torque for the life of the magnets (could be a loooooooong battery life) would be awesome, then trying it out continues to be worth a few hundred peoples time. Beautiful prototype, by the way. No wonder you're frustrated. I'd recommend using that talent to build a setup that allows you to fiddle with the geometry of the fields.

[@quantumleap359]

+thesimulacre He's going to have to find a way to turn the permanent magnet's force on and off. That's the Only Way he'll ever get this thing to run without cheating. Notice his right hand is out of frame at 8:32, that's when he is applying power via an electric motor to the left side of the axle. Of course, all of that is out of the camera's frame. Nice try, but no cigar. Cheaters never win.

[@dt-entp8635]

"you can see it is sustaining itself" --is it bollocks lol. You must think we were born yesterday.

[@philipmariaegeanga7984]

if nikola tesla was alive he will just tell your comment are you kidding me?!! of course it will work unlock the full formula of the 1st ac electric motor and you'll be surprised why only a few people said it will work oil is not forever we are now on its dawn

[@doratheillegalalien9183]

atoms have been vibrating since the beginning of time. what's powering them mr old dude of youtube, you tell us, what's making all matter to vibrate?

[@johnholemanjr3738]

I succeeded using recombinant water (HHO to H2O and back) It is how lightning works; solar pulls it apart and solar sparks it back. Your idea works great, but I want more available power. Seven Magnets abreast of each other and you might try staggering them 7 to 12 magnets across. When water boils, it explodes and destroys the container. When it freezes, it explodes and destroys the container. When you separate the hydrogen and oxygen and recombine it, 2000+ degrees are released. I called mine the water piston.

[@0987654321mnbvcxzmor]

Wow you have proved a point,the point being the principle works exactly how theoretically you can’t say but work it does. Whether permanent magnet motors create energy or tap an unknown source perhaps remains to be proven at least publicly in other words does the energy of magnetisation exceed or equal the overall output of the motor or vice versa..

[@NickR..]

Shows the sides, under the table, etc. then cuts.

[@t00ls742]

I deleted my first comment as I read other comments I did notice each time you say its gonna go, there is a shadow on the left side of the screen, and when it slows down you move your hand back and the shadow is gone what I think you are doing is pushing a small motor on the end of the shaft ...maybe has some sort of rubber tip to soften the noise...how about you do it again keeping the whole thing in plain sight and your hands in plain sight with no editing and I bet it work work

[@myvideos9811]

I like the way you are thinking, as in not so much as producing a high powered motor but eliminating the rotating resistance first. You almost did this I'm sure you will achieve this, then you are clear to work on the power and torque' good luck. Malc uk

[@erfans.6928]

i have see magnet motor self start i have it in my channel great job man! their one actually work

[@truetexan7755]

Why not just build a very large coil in near earth orbit and utilize the natural magnetic force of the earth itself .

[@raphanunu6912]

Good idea, but the coil musn't rotate !

[@mids5854]

@@raphanunu6912 nonsense, spin it retrograde.

[@raphanunu6912]

@@mids5854 : That was a joke !

[@mids5854]

@@raphanunu6912 Yes!

[@ezmatt]

this idea is actually quite smart, the problem is that the resistive force produced when electricity is generated in the coil will cause the coil to decelerate, and consequently fall out of orbit. then, the energy required to get it back into orbit will be more than what you produced in the coil.

[@uncletom2962]

Just in a few minutes Magnets do not run out of energy! You talk about laws of physics and have no clue about the basics

[@scottallen4768]

He will

[@patrickmorand5189]

So a small amount of energy needed to spin the shaft and keep it spinning. Could it generate more than that amount?

[@tonynguyen3006]

Respect you for doing this and showing us

[@hayabusa4061]

Boy I swear to God if there's a drill off cam

[@THEWATERENERGY1]

Ok looks you have a good configuration there,But what's your goal with the link in your comment,?Help us to improve the true?We have a large audience who is very interested.if so we will share your video..When you agree we can upload a small length of your your with a link to the original ?

[@dy2320]

+THEWATERENERGY1 To be honest I just wanted to share my take on the Perendev Motor to provide further evidence in support of what is still debated today. My goal is to generate as many views to this video as I can in order to see that this project still has support in the science community and really see what the modern day view of the public is on this matter. If you think you can help me out with that then yes thank you very much.

[@THEWATERENERGY1]

+Fantabulous Haberdashery Ok i will keep you inform.

[@kensmith5694]

+Fantabulous Haberdashery There is no debate about the actual perendev machine. It was only a prop for a fraud.

[@1NRG24Seven]

+Ken Smith Patent offices do not patent items that can not prove their claims in the realm of scientific and in this case mechanical engineering. Most patent examiners are not only patent attorneys with law degrees but also have a degree in one field or another and are experts in their respective fields... Nobody gets patents on fraudulent devices...period end of story. Get educated on what it takes to become a patent examiner these guys are not dumb by any stretch of the imagination, most have had over 12 years of college and have masters degrees in several fields.

[@kensmith5694]

1NRG24Seven People have patented many bogus devices. Your claim is just flat silly. www.eff.org/patent www.bbc.com/news/technology-19672986 www.lhup.edu/~dsimanek/museum/patents.htm I have read a lot of patents over the years. I have personally found several that were patents on things that simply would not work. While you are looking things up you should also go see why the dunning kruger effect applies to you

[@hasanyildiz9364]

I guess by 2030s we will see this engines on the market up and running. It will be a good thing for the nature!

[@americanvalorpatriot3689]

Well presented and very promising . Do not let the naysayers cause you to doubt your Ideas or progress . The greatest Inventors in history were doubted and even threatened ,yet were not swayed . From Leonardo da Vinci,to Nikola Tesla ,and to this Day with Elon Musk, great Inventions progress and benefit Humanity tremendously . You are following in the Footsteps of the Great Inventors . God speed young Man .

[@fanfare5288]

*ATTENTION! Could be a fake. Too many cuts in this video where a motor could've been activated or placed and removed. There's no point in showing that there is no hidden motor and later cutting out crucial parts of the video! Also, at timestamp **9:30** there's a cut in the video with NO cut in the audio! Looks very fabricated. Furthermore, a REAL motor is supposed to give power to an electrical load, but THIS so-called "motor" does only spin on its OWN. Maybe you've created something that preserves the kinetic energy that's given to it by hand, but it will stop immediately after you attach some load. What kind of "engine" is that??*

[@andreasschmitt2307]

What do you mean "coud be fake"? It is fake, just look what he does with his right hand at 08:42, you can see it in the reflection on the very left side.

[@fredfredburgeryes123]

Pay very close attention to the axle at around 7:41. You might have to use < > to go frame by frame, but there's a slot for an external drive of some kind and it stands out above the face of the bearing, unlike the other side where the axle is flush with the bearing. As has been mentioned before, about 8:49 when the motor "catches", you can see a dark object reflected by the surface of the motor case. It's suspect from the beginning that the whole object is not in frame, despite him being so adamant about his creation actually working. I'm deeply ashamed to share a planet with you, Haberdashery.

[@techma8196]

more observable sound on 10:08 to 10:11 form some external device !

[@gregdowd939]

And please explain what you think he's gaining by "faking" something that has been covered so much already on this platform? Doing it just for "likes"?

[@gregdowd939]

Wow....didn't realize that comment was 5yrs old....forget I asked

[@LofiEterna]

You could make this into an electromagnet stator/rotor motor. You could pulse the electromagnets up to a certain RPM, see how long it lasts, then adjust the pulse to keep the momentum going.

[@L3X369]

Videos like this makes me continue my research. I hope you made progress with yours even without showing off on youtube ;)

[@fpveddie]

I just want to say that permanent magnet motors have existed for quite a while , Google Howard Johnson , he has a patent on a permanent magnet motor that worked unfortunately he's no longer with us anymore, but when he was alive, he was asked if he was going to implement it in today's cars , he said no it was too stressful . but we are free to believe whatever we want, but just because we can't see it ,does not mean that it is not real , just remember there were a lot of people that didn't believe man would ever fly . so please keep the faith . God bless

[@quantumleap359]

God bless you too...

[@Ghozer]

Google "Infinity SAV Team" - They have made, and demonstrated a commercial-style WORKING magnetic motor, basically the same principal to this - they spin it up, then it sustains it's self... the difference between this one, and the one from the SAV Team, are this one is made of MDF and isn't perfectly balanced - you need to use as light materials as possible, and have it balanced as perfectly as you can - as any resistance on the shaft/bearings etc will cause drag and cause it to slow, and eventually stop... - if you can get it smooth enough that this doesn't happen, then you're on to a winner...

[@hotduck2007]

Fake the shadow on the left is a defo giveaway no shots with it running with it all in the shot nothing is free in this world

[@kimba381]

If you can get it smooth enough, and reduce friction to zero, and remove all eddy currents, and it will have to be absolutely silent..... and you STILL won't get any work out of it.

[@johnconrad5487]

@Kimberly Rae . True. without a load this is not a motor.. it is a "thing". add a load and it will very quickly stop. even with the little friction it has, it slows down. so its a thing.. name is not yet defined... maybe you can give it a name... LOL

[@DiyEcoProjects]

8:23 LOL FAKE!!!1 CAN YOU HEAR IT! the motor on the back - - - WANK

[@NewYorkCity007]

DiyEcoProjects it’s not the motor u Bozo

[@ivetakentheredpill6847]

You are the wank.

[@DiyEcoProjects]

@@ivetakentheredpill6847 lol cumberworld snot weasel

[@DiyEcoProjects]

All Perendev motors are just expensive brakes

[@kennyclement2823]

Love your honesty about how much success and how much less than success

[@DiMK_46]

for not being balanced yet... this is a great device!

[@sweetsavage17]

I think there’s a good reason it’s not mainstream and I think you need to be very careful as you get closer to the truth

[@django4444]

at 8:40 there occurs a new shadow on the left frame. Short after his right hand leaves the spot. Seems he is adding some kind of driller or Dremel to it. At 9:17 the shadow disapears and his right hand returns to the spot. Smells like a fake

[@davidconjefferson]

The fact that there are so many sour people trying to disprove your work and theory, historically leads me to believe that you are on the right path. Smash Bros. Players think alike. Nice.

[@3dprintwiz378]

Wisdom has been running after you, but you have always been faster.

[@aszi77]

Stick to computer games, dude. No need for more fake free energy device videos on youtube. Thumbs down!

[@salvtrooper113]

loser^

[@palebluedot7435]

@@salvtrooper113 it's fake

[@vsmichael1]

There's enough no educated xboxers in this world idiot. He does not want to follow you I'm sure.

[@vsmichael1]

@@palebluedot7435 not all people are fake like you are faded micro dot.

[@RebellisSpiritus]

you cannot game on mac lol

[@django4444]

How bad is this fake! At from 8:35 on you can clearly see that he uses his right hand to pick up a motor. Watch his body movement and the shadow/reflection on the frame. Later on he removes the motor also clear to see.

[@TheTemen9]

You did a good work and keep it up. I will be building up my experiment soon. I hope you will be able to point out were I made any mistake.