2007-2014 GMC Yukon Headlight Replacement & Bulb Removal How-To Change Headlight Bulb Assembly XL

[@jeffbush9537]

Just really helpful stuff here. Straightforward, simple, well produced. This is the kind of content that just makes you really thankful for a platform like KZbin. So much time and effort saved that I can invest in other things because of it and Mr. Wimberly’s great content. Thank you for the extra time I can spend with my family this evening instead of routing through manuals or pain outlandish $ to a dealership to figure it out and wondering when I can get my vehicle back. You sir are a hero.

[@WorkingWithWimberley]

Best comment on my channel ever!!! 😂😂😂

[@Depression2010]

If Truth be Told, there is absolutely no reason GM should make changing a lightbulb that complicated. Shouldn't have to take out that many bolts to change a bulb. The earlier models just had Pins holding them in.

[@alexblossom2425]

What headlight assemblies are these and where can I get them? Thank you

[@jermschmitt]

Somewhere, some engineer at GMC thought this was a good idea. Thank heavens you are here so we DIYers don’t dig for hours pulling all the wrong screws!

[@WorkingWithWimberley]

😂 I understand!

[@tamistevens3091]

Wow!!! I was quoted 274 in labor but thanks to your video my son completed both and he is not knowledgeable in cars!!! You are truly awesome for sharing!!

[@WorkingWithWimberley]

Excellent! That’s exactly why I make these videos! I’m glad he got the job done!

[@jrichie1616]

I've watched a couple of your videos and you make the process smooth. You show your work with great camera angles, let me know what tools are needed, and explain everything in a manner that is easy to follow. Appreciate your work!!

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped! I really appreciate the positive feedback!

[@danz9083]

This man saved me $250. Great, straightforward, well presented instruction. I thank you, sir.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@OldenfeldPlayers]

This was one of the best videos I could find on KZbin. I'm sharing that I ran into two specific issues with my 2012 Yukon. Sadly, the previous owner had removed the "hidden" bolt and so I had popped the wheel well off for no reason. Clearly two bolts hold it in well enough, I guess. Also, getting the old Sylvania bulb out was incredibly hard. I had to have someone hold the light kit and I had to use channel locks to (counter clockwise) unscrew it. I'm putting this out there sin case others run into this.

[@WorkingWithWimberley]

Thanks for the tips! Sometimes, those bulbs really get wedged in due to all the heat cycles.

[@natristanallen6888]

Thanks bro, gotta do my mother-in-law’s trick this evening. You came in CLUTCH with this video 👑

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@mec1307]

Thanks for this man. I am restoring a Yukon Denali and didn’t want to spend hours figuring this out on my own. Subscribed to this channel for sure. Your explanation of what to do and how to do are exceptional!

[@WorkingWithWimberley]

Thank you so much! I appreciate the support!

[@hitrecord7830]

Short and sweet like all mechanic videos should be

[@WorkingWithWimberley]

Thank you! I’m glad the video helped!

[@jay7206]

Wimberly’s! Thanks for the help gentlemen. My butts no longer clenched. I’m brave enough & smart enough to do it. You’re kind people.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@Vanilla.Gorilla77]

Great video bro.. straight to the point clear directions 🤙🏼

[@WorkingWithWimberley]

Thanks! I’m glad the video helped!

[@dougseely1174]

The best tutorial I've ever watched. He's slow and methodical just what I needed. Thanks

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@lzrdguy88]

Best video on the subject. Thank you.

[@WorkingWithWimberley]

@@lzrdguy88 You’re welcome! I’m glad the video helped!

[@Random-uv5wt]

super helpful.....I wondered how hard this was - great detail.

[@WorkingWithWimberley]

@@Random-uv5wt You’re welcome! I’m glad the video helped!

[@ikepuch]

Brother, I love your video. It is a straight and to-the-point instructional video without trying to make a Hollywood video. Keep up the work!

[@WorkingWithWimberley]

Thank you! I really appreciate the support!

[@kelly171a]

Thank you! To the point and step by step without a 90 second lead in of unrelated video like the last one I watched.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@rjndesign]

Exactly the way a “how-to” should be done! Thanks for this video. Precisely what I was looking for.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@matthewhoag2609]

Thank you!!! You made it easy to follow. Thanks for calling out the bolt sizes. I bought a $5 pry tool for the wheel well fasteners and it was way better than using a screw driver. Thanks for taking the time to post this!

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@homegirlrosie]

helped my dad using this video in 2023 😃

[@WorkingWithWimberley]

That’s awesome! I hope this video will help people for years to come!

[@mikespivey3711]

Not to one up but I just it in 2024.. also with my dad lol

[@chavezsebastian]

@@mikespivey3711doing it rn lol

[@Depression2010]

I watched this video 7 months ago and gave you a thumbs up. Today I finally decided to change the bulb and I watched it again. I cannot fathom how many man hours your video has saved people. Thanks again for the great how to!

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@chrisqballroark964]

Hours and $$$ saved

[@pinkmouseplayzz3245]

And God bless YOU for having a servant's heart to help others and not being afraid to express your love for Jesus!

[@WorkingWithWimberley]

Much appreciated! My father was a master carpenter and an excellent mechanic. I’m just showing people some of the things he taught me. And yes, I am a believer in Jesus Christ! 🙏🏽

[@jeffgoodiel3736]

A big thank you Steven Wimberley. As with most guys I thought I could do this without instructions. I needed to replace a blown bulb in the headlight assembly of my 2011 GMC Yukon XL. I couldn't figure what I was missing until I watched your video. It was the bolt under the wheel well that got me. Removing the bolts on the grill assembly was a big help as well. Well done video, sir!

[@WorkingWithWimberley]

Thank you for watching & be sure to subscribe! I really appreciate the feedback & support! The goal of this channel is to help, and your comment really encourages me to keep making better videos to hopefully help more and more people. Jobs that seem straight forward can often be tricky. That's why showing things like the hidden bolt is important & I try my best not to leave anything out. Thanks again! God bless!

[@mikehicks9488]

Very well done. I appreciate your taking the time to share this. I decided to let a professional do this, but at least I knew enough to make the right decision. This is much easier on my other vehicle, but as I don't have the mobility I once had, getting the bottom bolt out on my Yukon would have been a bit of a challenge.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped you make the right decision!

[@taylorpresley1989]

I just had to do this & have to say I was scared either way to try it but you helped a lot . After I got all bolts out I got down to the front of the tire & my wrench wouldn’t fit in there to remove it. Your video didn’t show how you got it out but I only had a $10 wrench kit to use being a single mom. I cried for 10 mins & some how it was lose after lol. Prayers work. I did end up with diff measurements for the bolts & had 1 11mm that I some how no matter what I wrote down couldn’t figure out where it went or would fit in. So I have 1 bolt left out but this did help a lot! I have inspection the end of this month & know I still have a reverse light out which is easier. However after I checked to make sure my headlight worked I seen that my fog light on the other side is out lol. I’ve noticed lately here that every GMC Yukon or any model I drive by has a headlight out & since I’ve had this car less then 2 yrs I’ve had a blinker go out, headlight, fog light & a reverse light. Seems GMC has issues with lights going out non stop & the work can be time consuming as well especially for the front! I seen another guy that shown removing the air filter & hose & I was more worried about removing stuff connected then bolts & rain guards.

[@WorkingWithWimberley]

I’m glad the video helped. I appreciate you taking the time explain your situation. I really hope everything works out for you! God Bless!

[@randalhartsfield3924]

Had to change parking lights on both sides and one headlight. Greatly appreciate the thorough of the process without 15 minutes of meaningless gabber. Loosening the area around the grill was the key! Got both sides done in an hour. Thank again.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped! I always try to get right to the point in all of my videos. 👍🏽

[@Troygantt]

Thank you for the video! Love the X J's!

[@WorkingWithWimberley]

@@Troygantt You’re welcome! I’m glad the video helped! I don’t have a lot of Jordans, but that was one pair I really liked.

[@kokoeanderson2788]

Best straight and to the point video ever thank you

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@daledaenen1972]

Working with Wimberley is the best of the best. The manner in which He describes vividly what he is doing even a child could follow his instructions and accomplish whatever is being instructed in the video. Please keep up the good work, Man you are the best.

[@WorkingWithWimberley]

I really appreciate the kind words! You’re welcome! I’m glad the video helped!

[@jonathancortez3638]

Thank you, for the video! I just got done replacing my headlight. Your video saved me $100.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@gene2675]

Thanks was a smooth demo

[@WorkingWithWimberley]

Thank you!

[@travisgroves9805]

I am not a mechanical dude in any way. I watched this video and went for it. 5 minutes later my bulb was changed. Fantastic ! Thank you

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@parkerdye8897]

Good morning Mr. Wimberley. Using your video I was able to change both headlights on my Yukon with very little fuss and save a few bucks. I appreciate your attention to detail, clear instruction, and positive messaging. Thank you so much for your time. Peace, Parker

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@JamesOKeefe-US]

So well done, easy to follow and understand even for someone like me who isn't an experienced mechanic. My 2007 Yukon light assemblies are cloudy so I will be replacing both of them using your steps, thank you for taking the time to share your knowledge with us to save us time and money, it is truly appreciated! Thank you sir!

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped! That’s exactly why I make these videos!

[@GamingImperfectly]

I worked a GM for years! I always said the only difference between a GMC And GM was the price tag! Nice vid my guy! 👍🤘

[@WorkingWithWimberley]

Thank you! I appreciate the feedback!!

[@sunkingreigns1]

Thanks to Steven Wimberley! What a clear process and great camera work! You are a trusted treasure! 5:25

[@WorkingWithWimberley]

You’re welcome! That’s the best compliment I’ve gotten since I’ve been making videos! 😂😂😂

[@middlechamber3574]

This was On Point!!! I watched this one time and I was able to change my headlight on my Yukon XLT. Saved me over $200. The part was $27. I am GOOD!!!

[@WorkingWithWimberley]

That’s awesome! I’m glad the video helped!

[@dimrp]

Thank you for this video. I successfully installed a new head lamp thanks to these instructions.

[@WorkingWithWimberley]

Awesome! I'm glad the video helped!

[@patrickwright872]

Just changed both my bulbs thanks to this fantastic guide. Cheers!

[@WorkingWithWimberley]

That’s awesome! I’m glad the video helped!

[@leonardperry6262]

The video was very helpful and I'll share with my truckfriends

[@WorkingWithWimberley]

That’s awesome! I’m glad the video helped!

[@jamesstreicher2398]

Excellent work! Who knew it would be so involved replacing a ciuple of bulbs. You did. Straight up easy! Thanks

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@gfelipe1]

Great vid straight to the job unlike some vids that have needless talking before anything begins.

[@WorkingWithWimberley]

Thanks! That’s the #1 comment on the channel. I always try to keep the videos straight to the point!

[@chiplindley9808]

Thanks for the video. No way I could have figured all that out without your tutorial.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@deearedub]

I was quoted $150 to have the bulbs changed. Thank you for this. I can now confidently do my own job and save over $100 depending on how much the two bulbs cost. Such clear instructions with the camera showing exactly where to do the bolts.

[@WorkingWithWimberley]

I appreciate the positive feedback. Thank you!

[@amenamen8737]

Thanks to your video I was able to change out my headlights & reverse lights..I got the 2010 truck.👌👌

[@WorkingWithWimberley]

That’s awesome! That’s exactly why I make these videos! I’m glad the video helped!

[@stevelukemeyer87]

This is, by far, the best video explaining how to do this. I have watched other videos that were much more complicated. This explains the process very well. Thank you!

[@WorkingWithWimberley]

From one Steve to another, You’re welcome! I’m glad the video helped!

[@Youbynimondollbaby]

Thank you for this very helpful and informative video. I just brought new assemblies, and im going DIY the installation this morning!!

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped! It’s not that hard, just take your time.

[@jaimebaylor9177]

My 14 yr old son just watched this video and changed my moms headlight for her. He's very mechanically inclined anyway but this video made it super easy for him. Thank you.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@rsmillican3299]

My friend you should be writing mechanical procedures. Thank you for such accuracy and thoroughness ! be

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@dougmoore5923]

You’re the best! Clear and concise. No fluff. I like it!

[@WorkingWithWimberley]

Thank you! Much appreciated! I’m glad the video helped!

[@danielcaldarale8043]

Very quick and easy to follow instructions with some good advice about loosening the bumper cover. It took me less than 30 minutes to switch out those headlights to LEDs. Thank you for your great video!

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@hambyte]

Thank you for a great, well-produced video - you made it easy to see and understand what I was missing!

[@WorkingWithWimberley]

Eric Hamric Thanks for watching & be sure to subscribe! I’m glad you found this video helpful! I really appreciate the feedback!

[@jimwestphalen4149]

Just used your video and put new headlights in my 2012 Yukon! I'm 70 years old and I did it! The video helped me do it and save several hundred dollars from a dealer. One thing I would comment on is: You didn't mentioned anything about detaching the wiring harness from the headlights. There's a clip you have to compress to release the connection with the headlight and turn signal. Other than that, the video explains it very well!

[@Aws81]

This clip is useful and great, but your accent was greater.. thank you and GOD bless you

[@WorkingWithWimberley]

😂 That’s the first time I’ve been complimented on my accent!

[@csmithnp]

Excellent presentation, easy to follow....pointing out 7mm and 10mm sockets very helpful. Well done sir.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@Julietta8793]

Omg Thank You so much for the detailed video. Not knowing much about cars or mechanics in general, I understood completely and successfully replaced them on my own. Thank You!

[@WorkingWithWimberley]

You’re very welcome! That’s why I make these videos. I’m just trying to help people save some money and do these jobs themselves! 👍🏽👌🏽

[@garybray3614]

Very good. Thank you for not taking off the battery cables. Taking them off is unneeded and screws up the computers so they have to relearn.

[@WorkingWithWimberley]

Thanks!

[@tonyanderson9766]

Don’t usually comment on videos but this was simple ,to the point and very informative, thanks

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@tpstoner1]

This is awesome! Since final bolt is slotted I was able to get the assembly out (and in) without doing anything in the wheel well. Worth a shot!

[@WorkingWithWimberley]

That’s awesome! I’m glad it worked out!

[@marcoperez4712]

Thanks for the video, other video instructions had me pull off the bumper off entirely, saved me a lot of time.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@TheAcbro357]

I just purchased a 2008 Yukon SLT so I'm definitely going to need your assistance

[@WorkingWithWimberley]

I have several videos on the Yukon, Suburban and Escalade trucks.

[@johnjunkins9689]

Thank you for sharing the informative video. You saved us much heartache and time.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@jmorgan3882]

I have a 2009 Denali. Definitely just gonna buy the bulbs and do it myself using this tutorial. Beats spending 200-300 dollars having a shop do it. Labor costs are ridiculous

[@WorkingWithWimberley]

Thanks for watching & be sure to subscribe if you haven’t already! You get it. That’s exactly why I make these videos. A lot of these job are simple and you can definitely do them yourself if you have some instructions!

[@Deaconjoeycb]

Thanks, Homesteak-clean and savory! just remind people to check their functions BEFORE putting 1 bolt onto re-assembly! Fab Dog! keep up the look on that Denali; she's a beauty!

[@WorkingWithWimberley]

Thank you! Much appreciated!

[@mikescannell529]

Very easy to follow and useful video. They don't make working on these headlights easy and you made it very simple. Thanks!

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@molallamerica896]

I hate changing bulbs on our 07 yukon. This should help. I never knew about that lower bolt.

[@mr.niceguy_420]

Finally a video that makes me comfortable enough to do this myself... Thank you bro... Subscribed!

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@mr.niceguy_420]

Btw,I did this the day after I commented... Went perfect (not one issue) and my Denali looks so much better now! Thanks again man!

[@WorkingWithWimberley]

@@mr.niceguy_420 No problem! That’s what my channel is all about.

[@odinshuginn]

Great video! Was a snap to replace the headlight bulb with these instructions

[@WorkingWithWimberley]

Thanks! I’m glad the video helped!

[@jaywilliams4544]

Very helpful and easy to follow your video. I will be doing this as well as changing my grill soon.

[@WorkingWithWimberley]

Thanks! I’m glad the video helped!

[@Tylnorton]

My dude!!! If I were near you I'd probably get you a case of beer! Because of you I was able to get my dad's 2011 Yukon Denali headlight bulb replaced!!

[@WorkingWithWimberley]

😂😂😂 I’m glad I could help! Just have one for me! 🍻

[@mountainman8159]

Thank you my man! I'm getting on this project tomorrow morning. very helpful.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@greatfallsboy]

Fantastic video. Unfortunately I’ve had to replace bulbs a couple of times on my 2008 Denali. Your video is by far the best! Photography was excellent and your instructions are spot on.

[@WorkingWithWimberley]

Thank you! I try my best to show all the steps and make these videos easy to follow!

[@jimwestphalen4149]

Very precise and good quality video on the headlight assembly replacement on my Yukon!!

[@WorkingWithWimberley]

That’s awesome! I’m glad the video helped!

[@louislopez6851]

Awesome vid. Another guy’s video has me pulling the entire bumper off. Thank you thank you

[@WorkingWithWimberley]

You're welcome! I'm glad the video helped!

[@pdwilli3]

Well done. Simple, concise, effective. It was exactly what I needed.

[@WorkingWithWimberley]

Thank you! I try to keep all my videos straight to the point. I’m glad it helped!

[@Smallchangegotrained]

Big help, thank you! The job was a cinch after watching this, just grabbed my 7 and 10mm and went for it.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@brighteyes2105]

This is so not what I was thinking or trying to do to change mine 😫 thank you for this very easy very understandable video

[@WorkingWithWimberley]

That’s great! I’m glad the video helped! 👌🏽👍🏽

[@brighteyes2105]

@@WorkingWithWimberley Tremendously luv thanks again! Really wish I would have looked first!🤦🏽‍♀️

[@1jimjiminy]

Excellent video. Thank you my brother. Keep up the good work. Have a great day and God bless you

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped! God Bless you too. 🙏🏽🙌🏽

[@busboyta]

You made it look so easy. I should try it myself now cuz auto shop made a big deal they had to remove bumper. Wants 200 bucks to install (BS). Thanks :). Good job

[@WorkingWithWimberley]

Thanks! It’s really not difficult when you know what you need to do!!!

[@jeffh5934]

Thank you! Your video of the inside fender bolts saved my bacon!

[@WorkingWithWimberley]

You’re welcome! I’m glad I could help save your bacon! 😂😂😂

[@sasquatchhawkins9040]

Wimberly, Great video on Yukon head lights. Very good instructions, you make it easier. Thank You and God Bless You! Squatch

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped! 🙏🏽

[@stevekleiboeker5804]

Helped me figure out a lightbulb replacement. Very easy to follow instructions

[@WorkingWithWimberley]

That’s great! I’m glad the video helped!

[@herbertlong8258]

Needed that. Was told this was way more complicated then you made it look.

[@WorkingWithWimberley]

Cool!

[@flyfishva]

Instructions were spot on. Thank you

[@WorkingWithWimberley]

You're welcome! I'm glad the video helped!

[@bmc7919]

This video is fantastic. Just trying to replace my headlight on my 2012 Yukon. Undid the top two bolts but had no idea there was a third bolt on the bottom. Just thought there were pins. The manual mentions nothing about this. I remember when doing something like this was simple. I'm sure it is designed this way to get people to go in to the mechanic or dealership to get it done. Absolutely ridiculous

[@WorkingWithWimberley]

I’m glad the video helped!

[@hookin-n-cookin6451]

I was waiting for you to remove the transmission next lol. That's a lot of work to remove a headlight assembly. Great instructional video. Thank you

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@plag9021]

Great video! Thanks for directions that are easy to follow, and every step is shown, with the things that are not necessary cut out!

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@anthonyshearin4603]

Thanks for the simple and to the point video!!!!

[@WorkingWithWimberley]

@@anthonyshearin4603 You’re welcome! I’m glad the video helped!

[@rwj777]

I own this same make and model Yukon and I was wondering how to change the headlight bulbs in it, because it would have been more challenging to do so without watching this video. My 95 Suburban had me spoiled, because changing the bulbs on it was so simple compared to my Yukon. Thanks for sharing! 👍

[@WorkingWithWimberley]

You’re welcome! Thanks for watching!

[@mac9955]

Excellent video... I left my inner wheel liner bolt lose, because I know it won't be the last time I have to replace the damn bulb, Cheers.

[@WorkingWithWimberley]

@@mac9955 Thanks a lot! I appreciate it!

[@scotts91hatch]

I just picked up a 2010 Denali and I had to do it in the dark I knew there had to be a third bolt thanks video was awesome

[@WorkingWithWimberley]

moto7198712 Thanks for the sub & the positive feedback! I try to be as detailed as possible in my videos so there's no confusion. I'm glad the video helped. How are you enjoying that Denali so far?

[@elysiairaheta3240]

Thank you for making this so easy to understand.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@marcusgarza342]

Great instructions! Very easy to follow. I really appreciate the video, saved me some money from going to the mechanic.

[@WorkingWithWimberley]

Thanks! I’m glad the video helped!

[@mitchellfisk6227]

Thanks for making the detailed steps seems easy. Have done this before and removed the entire grill, so this will make it easier! Nice video!

[@WorkingWithWimberley]

Thank you! I’m glad the video helped!

[@chuckbarker4375]

Thank you for the video. Helped alot i didnt know about the bolt in the fender well.

[@WorkingWithWimberley]

Thanks for watching & subscribing! The hidden bolt is the key. Once you get that loose, it’s smooth sailing. I’m glad you found this video helpful!

[@chuckbarker4375]

Yes it was thanks again

[@brighteyes2105]

Neither did I glad I looked I was in the middle of changing mine out

[@kenny8082]

Great video man! No longer than it needed to be and you were very clear about each step and tip. Thanks

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@drummer1260]

Steve. Thank you soooo much for your excellent instruction!

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@jameshamre8778]

I agree with the other commenters, excellent and thorough. Thanks for the tips

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@LordKaladar]

Thank you very much. I wouldn't have thought I'd have to come in from the wheel well, but I could tell there was likely another screw I couldn't see. Keep up the good work.

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@kellykillam8643]

Excellent video!! To the point and informative!! Keep ‘em coming!

[@WorkingWithWimberley]

Thank you! I’m glad the video helped!

[@LRMluisreyes515]

Great vid bro!! This vid showed me exactly how to do the job qnd just saved me real cash. Thank you very much!!

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!

[@c_lent]

Great video, One thing to note though, taking out the main headlight bulb is a pain in the ass, there is a locking mechanism on the interface that makes it very difficult to remove. You have to take a flat head or something to shimmy the connection apart. I thought I was going to break the wiring. But Thanks for the video you explained things really well!

[@WorkingWithWimberley]

You’re welcome! I’m glad the video helped!