Workshop shelves & cabinets [Video 444]

In this longer video I make a start on the workshop makeover, reusing some of my cabinets from the Cabinetry basics series - mostly to get them out of the way - and using up some old boards I used to use as scaffolding, to make some open shelves. Enjoy!
++++++++
I’d like to thank MEDITE SMARTPLY for their support of the channel at this time: MEDITE makes it real, discover more here:www.meditemakesitreal.com/?ut...
++++++++
Other videos mentioned:-
Cabinetry basics P1 - • Cabinetry Basics Part ...
+++++++++
Become a 10 Minute Workshop KZbin Member for exclusive content - bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - / 10minuteworkshop
Support the channel directly - bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - bit.ly/10minuteShop
Amazon store - bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
As an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - www.amazon.co.uk/shop/petermi...
++++++++
Used/featured in this video:-
RGB LED lights,5 metres - amzn.to/2OKpXGV (US: amzn.to/3vlEjhW)
RGB LED light extension and connectors - amzn.to/3eLzmJ9 (US: amzn.to/3eMYcZ8)
Festool TS55 Tracksaw - amzn.to/2pGvzDS (US: amzn.to/2oOgGhw)
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Benchdogs bench dogs - benchdogs.co.uk/collections/b...
Festool Midi extractor - amzn.to/2tCIN3Q (US: amzn.to/2rKNIOx)
Benchdogs rail square - bit.ly/bench-dogs
Other handy gear:-
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
Mirock 500mm T-ruler - etsy.me/365P0KE
Festool PDC 18/4 - amzn.to/2s3J0eq (US: amzn.to/2tWUHEL)
Festool T18 drill/driver - amzn.to/2QAHpK1 (US: amzn.to/2RPuOCR)
Spax screws - amzn.to/2oYWydc (US: amzn.to/2oOjkDT)
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
+++++++++

[@draztiqmeshaz6226]

I like that last minute - much more realistic depiction of how these things usually go.

[@tunnel7]

Nice to see you 5S the workshop Peter looking good.

[@Kottesque]

When you showed the area behind the camera at the start, I thought...'Phew...I'm not alone'

[@10MinuteWorkshop]

Oh yeah, always a 'bench of shame' somewhere! 😂 👍

[@zimmermaniacs]

I immediatly thought the same...but then, I'm autistic, seems to be the problem....I like to tidy up things and make space for ' emm, but within 2 or 3 hours I end up in the same mess as before

[@macbaar6073]

It is our bench of tears, success and it-suck-ess so let us not be ashamed but proud of it... we find everty thing in this juvenile order... only a genius is capable to rule the chaos ...

[@josephthompson4363]

I started my workshop update in the summer of 2001. It's nearly finished now, just a few things to do.

[@10MinuteWorkshop]

😂 👍

[@kz.irudimen]

Someone asked me why I wanted a workshop and told me I couldn't use it just to make more stuff for the workshop. Answer was "of course I can" :)

[@neilpountney9414]

LOL Joseph!

[@esixx17]

You cant rush these things.

[@nigelwarner1497]

Like the out takes...they give me hope when my shelf falls on my head and I think...that doesn’t happen to Peter..😀

[@10MinuteWorkshop]

If it does I never remember it! 😂👍

[@carllamb6711]

Great video Peter Every day for the last 23 years I say to the wife I’m going in me work shop to sort it out lol and it’s still not yet how I want it.... it’s never ending lol 👍👍👍👍

[@10MinuteWorkshop]

Thanks Carl! And no, it never ends! 😂👍

[@daverobinson6384]

“Grasp the nettle’! I haven’t heard that phrase since before my granddad died many many years ago!!

[@SamanthaCoolBeans]

Really enjoyed this video. Something rather pleasant seeing a simple job done well.

[@10MinuteWorkshop]

Thanks! 👍

[@JohnMcGrathManInShed]

It's an eternal battle to keep the workshop in order! nicely done.

[@10MinuteWorkshop]

It is indeed a constant battle - especially when you’re inviting ~20,000 people to take a look every week! 😂👍

[@andrewlawrence990]

It’s so easy for order to collapse into disorder that I must wonder if the latter is the natural state of affairs.

[@gbwildlifeuk8269]

I think the usual is, x years under the bench, x years on the top shelf, x years in the loft - then off to the tip!

[@JamesManCave]

Aha! 😀 That's looks fantastic Peter, I really like the contrast of the painted cabinets against the redwood unit. Nice touch 👌

[@10MinuteWorkshop]

Cheers James! Yes, worked out OK. It’ll probably look even better next week! 🤔🤷‍♂️😆😂

[@JamesManCave]

@@10MinuteWorkshop hmmm interesting 👍

[@10MinuteWorkshop]

Or maybe even in the AWITW vlog out tomorrow... 🤔

[@JamesManCave]

@@10MinuteWorkshop 😀😀

[@grahamsambrook3170]

Really pleased to see a professional with a messy bench like mine. I made the versatile planter brilliant not as good as yours but wife is very happy with the outcome

[@10MinuteWorkshop]

Excellent! It's what you make from the mess that matters! 👍

[@grahamsambrook3170]

don't wish to sound sycophantic but I really enjoy your information. Thanks for that and keep it up

[@garretalfert]

I always thought it's clamps that every woodworker can't have enough of. But with you it seems to be routers instead ;)

[@10MinuteWorkshop]

And plunge saws... 😬

[@paulmaryon9088]

Well Peter, yes I know that "wish I'd never started feeling' I'm moving workshops at the mo, and omg! what to keep and what to chuck out?!, stay safe and thanks for posting, oh and those lights , like a 70s disco haha!!

[@10MinuteWorkshop]

Ha! I was thinking more of a bar than a disco? Double quarter-inch flush trim and a side of round over?. 🤷‍♂️🍻

[@paulmaryon9088]

@@10MinuteWorkshop hee hee glad I moved out of west London years ago, could've gotten messy, take care mate

[@rogerprice4504]

So glad I watched this. And the personal tip I learned was the one using a spirit level and a clamp to get the left hand cabinets at the same height. So simple, but so easy and cheaper than a laser!!

[@10MinuteWorkshop]

Thanks Roger! I find it's just good to have something for the left-hand cabinets to bear against, rather than trying to line up against a laser 👍

[@archbeast2]

Peter, I also liked the use of the long clamps to support the first cabinet (if that’s what you did)?

[@tonyblunsum2547]

Love the wee smile when the lights came on ! Happy camper 😀

[@10MinuteWorkshop]

Oh yeah! 😆 👍

[@houtslager]

Bleeding Eck! I thought I had it bad with "routermania " but you have it really bad Peter 🤣🤣🤣. Nice tidy up of your man cave, looking forward to seeing you next time. Karl

[@10MinuteWorkshop]

Thanks Karl! I’m just glad I didn’t show you all the routers, then... 😱😂😂👍

[@frankblack1481]

The edge of the birch ply looks great unfinished. Between yourself and Joey NZ I’ve really grown to like it. I did a tip for my bench recently and it was 2 layers of 3/4 birch ply just varnished and I love it. The offcuts are going to be turned into coasters thankyouverymuch.

[@10MinuteWorkshop]

Looks good with a coat of wax, too! 👍👍

[@AndyCPugh]

That is an amazing collection of routers!

[@10MinuteWorkshop]

It’s coming along, Andy... 👍

[@Trotsetukker]

I'm devastated... I thought you'd be a person who'd have everything nice, neat organized. it gives me hope to live along with in my mess ;) keep up the video's, I like them.

[@10MinuteWorkshop]

I’m getting there! Honestly, I am! 😂👍

[@macbaar6073]

The new Club in Town... The Millard.... 🤣😂🤣👍👍👍👍🤗🇨🇭 next vid your music installation...

[@10MinuteWorkshop]

😂 🍻

[@SujMenon]

Wow Peter, looks really good 👍. By the way, just like everyone says, "You just can't have enough clamps.. wait routers, I meant" 😁

[@10MinuteWorkshop]

Thanks! And yes - always room for more... 😂 👍

[@jothain]

Ahhh the end credits. It's so lovely to try to do something like that yourself without help. It's sometimes so annoying when you'd need help for one minute job, but no one is around and you have to fiddle around for quite sometime. Pretty much everything can be made with one man, but boy it sometimes eases and saves time to have some help 😊

[@10MinuteWorkshop]

Too true! 👍

[@Scooterx2]

I usually pick up one tip from each of your videos. This time it was using the long clamps to support the cabinet, and the small clamps to hold the level in place. Thank you.

[@10MinuteWorkshop]

Thanks! 👍

[@stevebosun7410]

Hi Peter, clearly a man can't have too many routers.

[@10MinuteWorkshop]

Well, clearly Steve! 😂👍

[@davezeraschi7936]

I’m glad you showed the blooper at the end shows how sometimes it doesn’t go as smoothly as it looks! 😊

[@10MinuteWorkshop]

It never goes as smoothly as it looks, lol! 😂😂

[@davezeraschi7936]

@@10MinuteWorkshop 🤣🤣

[@colinwilson7524]

Thanks for including the outro sequence. Nice to see your struggles... shows you have the same issues we have... where is the clamp, where is the drill, what have i done the with screws.... Feck!!!! 😂

[@10MinuteWorkshop]

Yep - getting everything perfectly in position... then realising the drill is on theother side of the workshop! 🤷‍♂️ 😬

[@tc9148]

Peter sure is a snappy dresser while he works in his workshop.

[@10MinuteWorkshop]

👌

[@sewob147]

I immediately thought the bench of shame was the topic. Phew! It lives on. The catharsis of workshop organisation and the 'well that's just right' satisfaction you've got it sorted until it needs rejigging to accommodate more new kit has to be common ground for so many small workshop owners.

[@10MinuteWorkshop]

Haha, it's turn will come - but not today... 😂 👍

[@TheJonkilleen]

Love the idea of clamping a spirit level to a cabinet. Now why did I not think of that before.

[@10MinuteWorkshop]

Thanks! And yes, it’s an old trick, but a good one. 😂👍

[@phillipneale6422]

Well done Peter very pretty !

[@10MinuteWorkshop]

Thanks Philip! 👍

[@mick882]

Brilliant as usual Peter

[@10MinuteWorkshop]

Thanks Mick! 👍

[@manualdidact]

Seeing the end of this video has helped me to realize why I'm not as productive as I could be. My problem, apparently, is that I don't own enough plunge routers.

[@10MinuteWorkshop]

And neither do I. 🤷‍♂️ Does anybody? 😂😂

[@thetallcarpenter]

'going for the easy win'. Absolutely love it.🤩 (and the fountain pen👍)

[@10MinuteWorkshop]

Thanks! 👍👍

[@norberts482]

At first glance, the video is one of many ... BUT it contains an incredible amount of knowledge and clever solutions👍 Alignment with the long spirit level. Rails for the drawers (fast, accurate, cheap ... like everything in this project). Offset of the middle part (which is not only a design element, but also hides a possible horizontal inaccuracy). Marking the holes in the wall ok, ok ... I knew already the one or other, but you showed how to do a project like this fast, accurate and economically, without neglecting the design. I will „take over“ the construction of the drawers for my mobile welding station. probably with small rollers on the top upside down near the frontside, to keep the drawers as horizontal as possible when pulled out and still remain smoothly. 🙂

[@10MinuteWorkshop]

Thanks! 🙌👍👍

[@davidosullivan3432]

the paddy's day green looked amazing

[@nickolasreeks4743]

Good to see a fountain pen !!

[@10MinuteWorkshop]

Love them! 👍

[@nickolasreeks4743]

@@10MinuteWorkshop it’s the only way to write.

[@lobbylobbster]

Cracking job Peter !

[@10MinuteWorkshop]

Thanks Pete! Yes, pleased with how this has turned out - and a much needed clear-out too! 👍

[@lobbylobbster]

@@10MinuteWorkshop I admire your consistency....even on workshop builds 😊👍🏼👍🏼👍🏼

[@ChristianN-]

Great video as always, I just love seeing all workshop related videos to get ideas and inspiration.

[@JarJarArt]

Very pleasing to the eye. It's a design that even would be suited in a modern kitchen!

[@10MinuteWorkshop]

Thanks! 👍👍

[@RH-lz3om]

Please give a brief on screw selection and also correctly drilling pilot holes. Thank you for the great tutorials.

[@10MinuteWorkshop]

Thanks! That’s not something I’d considered, but I will! 👍👍

[@DavePawson]

A fountain pen no less, you do surprise me (a secret FP user [and collector] for ... lots of years)

[@10MinuteWorkshop]

I do like a fountain pen, yes - though it all stemmed from needing to draw something for a video, and pencil wouldn’t show! 👍

[@kiwdwks]

Nothing like making the shop better/more efficient! The lighting is awesome.

[@10MinuteWorkshop]

Thanks! And yes, really pleased with how it worked out. 👍

[@draztiqmeshaz6226]

Quick n clean, I like it! If you need to get rid of a plunge router with 1/2" collet I'll pay shipping to the states.

[@richardclarke82008]

That's gonna be one hell of a satisfying setup once complete. My satisfaction gland is going over time.

[@10MinuteWorkshop]

Thanks! Mine too! 😆

[@traceydysert6096]

Very nice cabinets!

[@10MinuteWorkshop]

Thank you! 👍

[@naughtypine]

It's always fun taking the time to organize in the shop. Nicely done.

[@10MinuteWorkshop]

Thanks! 👍

[@gilbycoyote]

The difference between a workshop and a youtube workshop? RGB Lights! 👌🏼

[@10MinuteWorkshop]

😂 Very true! 👍

[@stevewalker7822]

I’m all for organizing my shop. Really nice job, Peter

[@10MinuteWorkshop]

Thanks Steve! A small step in the right direction... 👍

[@wearsjorge55]

Hey mate, sparky in Australia here. If you're looking to get the best colour you can out of those LED's for your videos the aluminium extrusion with defuser you can buy the strip's with (from a electrical wholesaler, lighting shop, online, etc) they spread the light out mote evenly, it's cleaner and easier on the eyes also the little square shadows that'll reflect onto the wall won't be seen. Ultimately doesn't matter, this is a lil feature for your shop and videos not a client's home its something that is hard to pick up on when the camera is so far away but it'll be noticeable in the dark

[@10MinuteWorkshop]

Thanks mate; yeah, if it was for client work that’s what I’d do, but this was just quick and dirty bling for the workshop. 👍👍

[@glennryzebol4472]

Gotta love the easy win. I made my first cabinet yesterday with your cabinet basics video in my brain. Just a scrap wood storage project but a step forward towards, one day, a full on shop cabinetry project. Thanks for these. Great stuff!!

[@10MinuteWorkshop]

Fantastic! Really pleased the videos helped! 👍

[@steenfraosterbro3268]

Fancy lighting Peter. Merry Christmas

[@10MinuteWorkshop]

👍

[@carllamb6711]

Love the out takes Pete 👍👍👍

[@10MinuteWorkshop]

Thanks!

[@maxbee4460]

It’s nice to see I’m not the only one. During my working life on my own I could have done with a third arm and all three telescopic. How many times you just get that cabinet or shelf just in the right place, only to find the bloody drill, screw, or screw driver etc. is just out of reach. I’m retired now and can work at home in the garage. I have four arms now, two of which belong to my assistant (wife) very useful! Cheers love your videos

[@10MinuteWorkshop]

Yep, always! Thought it was worth a little reality, at the end! 😂 👍

[@daviddura1172]

Nicely done!!!

[@mack1609]

Nice work

[@1957blaine]

Great job Peter, I’ve been trying to get myself organized so I’m on the hunt for any ideas I can use looking forward to next week. take care and have a great weekend

[@10MinuteWorkshop]

Thanks, you too! 👍

[@Ianf1x]

You should be called router man. Great vid thank you

[@10MinuteWorkshop]

Thanks! 😂👍

[@barrydoxseyuk]

Great job. Insperational as always.

[@10MinuteWorkshop]

Thank you! 👍

[@geoffdoig317]

Jeez you work fast

[@awantamta]

That was just what I needed to inspire me to organise my workshop.

[@10MinuteWorkshop]

Thanks! 👍

[@Robe999]

Outstanding as always Peter , some great tips about The LED strip , I counted 11 Routers ????? Now Thats Living Large ha ha ha God Bless my friend , Your Smile says it all

[@10MinuteWorkshop]

Thanks! And that’s not all the routers... 😬👍👍

[@houtslager]

@@10MinuteWorkshop WHAT ! You have MORE 😳😳😳 @ 🤣🤣🤣 K

[@jamescherry2082]

Thanks for the idea's I'm moving house shortly and my current workshop sort of evolved over the years, this time I'm going to plan it properly, from my own experience and any idea's offered.👍

[@10MinuteWorkshop]

Sounds good! 👍👍

[@DaveGDesigns]

Love the look of the LEDs PM it's surprising how much of a difference it makes

[@10MinuteWorkshop]

Thanks! Surprised me too, actually! 👍

[@sicr7373]

Great video, it's inspired me to tidy up my workshop. I like the speeded up sections of the video, if only we could really work this fast, so much more would get done in a day!

[@10MinuteWorkshop]

Thanks! And yes, we’d all be so much more productive at 400% 😂👍

[@themaninthesuitcase]

I have the same lighting kit and fitted it behind the TV last week. You’re right to avoid cutting, the corner adapters I got were a pain to fit and fussy. Took a lot of fiddling about to get the green to work after 1 corner. My wife pointed out the bend trick from the manual just after I finished....

[@10MinuteWorkshop]

Timing is everything! 🤷‍♂️👍

[@johnduffy7502]

Looking great! After your opening comment of "I wish I'd never started..." I was waiting for the 'gotcha', but all seemed to go very well. I'm following this with interest as I also have a storage issue looking for a solution!

[@10MinuteWorkshop]

Thanks! Nah, it just started out as clearing a couple of shelves, and turned into a much bigger job is all. 🤷‍♂️👍👍

[@robgullen]

Well, it's a start! I'm always amazed at the US KZbinrs that must spend more time, effort & money on workshop furniture - all in birch ply of course! My own workshop took a short-cut with a load of re-used kitchen wall cabinets.

[@10MinuteWorkshop]

Always have to start somewhere! 👍👍

[@randallthomas5207]

When i was building houses in Vegas in the 2001, to 2005 boom, one of the sales fell through, and the new buyer upgraded the kitchen. So, the cabinet shop had to pull all the kitchen cabinets out and replace them. Resulting in them having a full set of cabinets with no home. So, one of my coworkers asked the cabinet shop, how much it would cost to buy them for his garage. The cabinet guy asked him where he lived, so he could figure travel time. He goes home form work two days later and notices a bit of saw dust in the driveway. When he opened the garage door he got a shock. The cabinet shop had sent over a crew, and his entire garage had new cabinets. Only downside was that everything that had been on temporary shelves or pushed up against the wall was now in the middle of the floor.

[@roncooper6302]

I dread to think how much a sheet of 8 x 4 18mm Birch Ply would be?

[@simonchiplin]

@@roncooper6302 Anywhere from £65 to £115 in Wales! Its those sort of prices that really make you think, "That shuttering plywood doesn't look that bad!" lol

[@robgullen]

@@roncooper6302 From what I've seen Lowes & Home Depot in the US "lumber" is rather cheaper than it here - birch ply is about a third cheaper than here on average, so I'm told by a friend in Canada.

[@wingsdesire1]

Wow 🤩 Thanks for sharing! I can’t wait for the next episode

[@10MinuteWorkshop]

Thanks! 👍👍

[@rossmitchell4403]

Looks great already!

[@10MinuteWorkshop]

Thank you! Getting there... 👍

[@EddyCarroll]

Great tip with the long spreader clamps as props, Peter. Those lights looked pretty good at the end too. I'm slowly getting my own workshop under control, but I could really use a second, identical empty workshop where I could stash everything while I get the first one sorted out!

[@10MinuteWorkshop]

Cheers Eddy! Yrs, exactly that - you should have seen the unholy mess in the other room while I was doing this! 😂

[@pctatc66]

Peter, that looks awesome!

[@10MinuteWorkshop]

Thanks Scott! 🙌

[@sjfarrell2.03]

That's a lot of routers 👍

[@10MinuteWorkshop]

And that’s not all of them! 😂👍

[@stevemortimer4549]

Brilliant video

[@10MinuteWorkshop]

Thanks! 👍

[@michaelplays2449]

Nice job Peter ! looks great

[@10MinuteWorkshop]

Thanks Michael! 👍

[@zaffman]

Holy cow you have a lot of routers!!! Nice work. I’m going to be tearing out my garage shop and pouring new concrete floors and new cabinets this year; it was originally built in 1927-28 timeframe. I will have to consider using some of the LED lighting like you did.

[@JohnReo]

A router for every bit, that's how I work 😀

[@10MinuteWorkshop]

Glad I didn’t put them all on show then, lol! 😂 👍👍

[@10MinuteWorkshop]

It’s the most efficient way 🙌👍👍

[@MJ-nb1qn]

Congratulations! Nice! Monday this week I refitted about the first 8 feet of wall space as I walk in my shop. Friday I still walk in the shop and my mind goes “WHAT”! Well it has been 20 years since the last go round. Thanks, but I didn’t think about LED’s!

[@10MinuteWorkshop]

I know, weird isn’t it? The shock of the new! 😂👍

[@hacky296]

Great! Now when I go into my own workshop I'm going to be thinking I can't put off tidying up any longer. Another great video, thanks Peter :)

[@10MinuteWorkshop]

Haha - that's how I felt last week! 😱 😂

[@HyperactiveNeuron]

Great as always. I love the idea with the RGB LED strip. I have several I bought a while ago with Google assistant compatibility that I haven't done anything with yet. Maybe the garage needs some bling LOL!

[@10MinuteWorkshop]

Thanks! 👍

[@julianadams2404]

Fantastic router collection! Beautifully lit as well 🙂

[@10MinuteWorkshop]

Thanks! Yes, though I should have made the shelves wider, then I'd have had space to display them all... 😱 😂

[@TrevorTraub]

@@10MinuteWorkshop Display them all!? I was looking at the final shot thinking WOW how many routers does Peter have? I guess the answer is more! Is that just what you have collected over the years or do you actually use them all?

[@andrewwatkinson1548]

Nice work. Looks brill. 👍🏻

[@10MinuteWorkshop]

Thanks! 👍

[@triplex86]

Looking forward to the Peter Millard multi coloured flashing light show on your future vids - LOL

[@10MinuteWorkshop]

Oh yeah - disco night every night! 😂😂

[@DuncanEdwards.]

Or future artsy craftsy vids

[@TheHandyroo]

I think you have more routers than I have router bits Peter!

[@10MinuteWorkshop]

Wait a minute - you can put a bit in them...? 😂👍

[@rvmark]

Ron Paulk’s cubby system would do your shop well. I’ve built them for my shop and having an organized shop helps with my pool cue production. Love you videos Peter.

[@10MinuteWorkshop]

I’ll take a look, thanks! 👍👍

[@channelwhywhywhy]

Arrh Peter you're shaming me into doing the same for my small space! Been putting it off for a while and this has spurred me on to just get it done! 👍

[@m.f.8752]

Great job.

[@10MinuteWorkshop]

Thanks! 👍

[@adelaideinvigilation5230]

Im sure the lights should be in the floor as an ode to the 70s era disco

[@karlsjov]

I thought the saying was “you can never have enough clamps”, but it seems it’s also true when it comes to routers 😁 Nice build, looking forward to the next part.

[@10MinuteWorkshop]

Thanks! 👍

[@nicowilson]

Looks great.

[@10MinuteWorkshop]

Thanks Nico!

[@DeafMaker]

Looking good.

[@10MinuteWorkshop]

Thanks Dafydd! 👍

[@LTWCarpentry]

Looks great !

[@10MinuteWorkshop]

Thanks! 👍

[@ScubaDaveCCR]

Peter, I have been busy and have been absent for a month or so. 83k to 119k subs THIS IS SO AWESOME. 🙏🏻

[@10MinuteWorkshop]

Thanks David - and welcome back! Yes, it’s been quite a start to the year, long may it continue, if at a reduced pace! 😆👍👍

[@ericgelman2792]

Looks like a little shrine to routers...very nice!

[@10MinuteWorkshop]

👍

[@photojed]

LOL. And until the next remodel...we're all in the same boat. It never ends!!

[@10MinuteWorkshop]

Yep. Exactly. 🤷‍♂️👍

[@davekavanagh7599]

Looks amazing, all that festool deserves a nice backdrop 😁

[@10MinuteWorkshop]

Thanks! 👍

[@mph1140]

WOW! You could open up your own internet cafe with all those routers. The shelves look fantastic 👍🏻

[@10MinuteWorkshop]

Haha, thanks! Imagine what I could do if I could fit the rest of them on the shelves... 😆 👍

[@kpdeerleap]

Great to see that your life is real in the clips at the thought 💭 it was only me that struggled doing things 😂😂🤟🏼

[@10MinuteWorkshop]

The number of times I line something up just right - then realise I’ve left the drill/screwdriver/spanner/nailer etc. *just* out of reach... 🤦‍♂️🤷‍♂️

[@rick91443]

Looks great, even a little "Christmasy" Peter...cheers...rr Normandy, France

[@10MinuteWorkshop]

Christmas all year round! Who could ask for more! 😂 👍

[@derekmills1080]

You said your workshop was cluttered, to me it's very, very tidy! I have a 10' X 20' garage workshop in the back garden jammed to the rafters (literally) and surplus tools, timber, paint etc. seem to 'flow' into my kitchen, lounge and spare bedroom. (You've probably guessed I am a bachelor). My brother thinks I am mad since his house is really clean and tidy, but he's happy to have me round doing odd jobs as and when needed!

[@derekmills1080]

P.S. I am retired and 'doing odd jobs' is my hobby.

[@ptkins]

Looks really neat - even the arrangement of shelves looks great leading into a central focal point. Also I never realized you owned so many routers! :D

[@patrick860]

Bravo, sir!

[@10MinuteWorkshop]

Thanks! 👍