Making Belt Grinder 2"x 72"

[@general5104]

I've got to stop watching these builds. I don't know which one to build FIRST ! WOW...I love these builds!!! THANKS FOR POSTING

[@ShaukatHakim]

Cutting, tapping, drilling, welding, painting - finally awesome belt grinder.

[@lightsnsiren79]

People who have never gone through that with a bench grinder don’t REALLY know what it’s like to want a belt grinder. It’s like a rite of passage: you must wear out at least one bench wheel before you get a fancy belt setup.

[@tbhUSuckOo]

Funny to me cuz when I just started I burned the motor of my grandpa's grinding bench. It was 50 years old but still..

[@jamesfield5346]

100% facts... lol

[@INSIDEHARDWARE]

After watching well made video production and quality builds I stumbled on this video and I’m like: boy that is some crude rough measuring and all… then I’m like… man that’s still better than what I would muster up. Good job

[@GoldenTV3]

It's crazy how much tools you can make yourself that are cheaper and better

[@fistpunder]

That is the greatest can opener I ever saw!

[@MrHristoB]

This goes on my ToDo list!! Great work!! Well done!!

[@DIY-vv4fu]

做好了吗，你的砂带机

[@MrHristoB]

@@DIY-vv4fu Спокойно, като го направя, лично ще те уведомя. А преди да задаваш глупави и ехидни въпроси, бих те посъветвал първо да прочетеш коментара ми, и да се увериш че го разбираш.

[@timkelley6616]

Buying the motor for the one I’m building tomorrow! Fun build.

[@MadeinPolandChannel]

Great video and belt grinder! Such a tool make life easier :)

[@WorkshopFromScratch]

Thanks 😁

[@MCsCreations]

🖖😊

[@tecnopufi]

That's true. If you make a disk sander from the pulley on the motor, this machine will be more useful. Since i built mine, i can sharpen my drill bits accurately. Sorry for spamming, but here is mine: kzbin.info/www/bejne/hF6lZWCMjtaXac0

[@jvmiller1995]

Wow truly a nice simple effective machine. You should be very proud. I made one a couple years back just out of scrap and a treadmill motor. I had like 3 bucks in it and though it does still do a good job I thin it is time to do another one right. I will be blending a few that I seen Together but this is really close to what I want to build.

[@tomsdreamshopworx]

Very nice! I started one about four years ago I really need to get back to it. You have given me a couple ideas.

[@WorkshopFromScratch]

Thank you Very much 😀 I am glad that the film was useful for something :)

[@thomaswunsch12]

very clever use of the plasmacutter, thanks for this brilliant idea !!

[@PRospond]

That's one awesome grinder! Love the versatility.

[@marcfournier823]

I like this design. The circumfrence of the wheels on the grinding surface and backing plate should be colinear. This will ensure no space between the belt and backing plate. Your setup has about 1/8th space between belt and plate. This will give bevel grinds a radius.

[@jorgepuccia1679]

Un espectáculo, siempre sigo tus trabajos, sería genial un tutorial con las medidas. Exitos futuros.

[@tjkoker]

Great video. You have some new innovations, particularly the use of a compression counterbalance instead of an expansion spring. Don't know why more people don't do that. Expansion springs break all the time. Since you don't have a mill you should use your plasma cutter more often. It seems to leave a nice clean edge. Loved that you slotted with it. Would have liked to have seen how it did on the curved slot. I really enjoyed watching you work. Looks like this 4th of the July weekend I'll be starting on mine. Sorry honey.

[@psion5mxfred]

Thank you, especially for the dimensioned pics.

[@WorkshopFromScratch]

I am glad that I could help :) Regards

[@denniswhite166]

Came here from Made in Poland. A guy there had said you have a good channel yourself. He was right! I've subbed to your channel. BTW the coke can made me LOL.

[@WorkshopFromScratch]

Thank you :)

[@buynsell365]

Excellent job !!! I really like the design of this unit. Thanks for sharing.

[@WorkshopFromScratch]

Thank you very much :)

[@KO-fw4mz]

Dewalt, Hitachi, Porter Cable and Bosch downvoted this video. Amazing work !

[@WorkshopFromScratch]

Thanks 😁

[@firebladex8586]

Awesome work! There's _always_ room for one more homemade belt grinder on youtube.

[@WorkshopFromScratch]

Thank you :)

[@regsparkes6507]

Love that Coke can trick! Great grinder!

[@SteveDeLaCruz-q8c]

That's what I'm looking for ...a sander that don't require a alot of out sourced parts..I like every thing to be in house

[@johnwurst6691]

Great machine! One bit if advice: you need to turn the gas spring around so that the oil inside lubricates the seal!

[@findvoltage]

I would never have thought of that! Thanks bruv.

[@АлександрМанжиев-з5б]

Сколько просмотрел фидеороликов- этот самый простой в исполнении, орегинальный!!!

[@gasperajdnik5627]

You are a wery smart guy like made in poland 😎. Keep Up The god work.

[@1Splat]

Dziękujemy za film. Świetna robota.

[@gdb5220]

Awesome build man! This is the best how to that ever watched on a belt grinder! 👏👏

[@WorkshopFromScratch]

Thank you very much:)

[@genenonya8458]

I would give more thumps up they won't let me! great build!!

[@WorkshopFromScratch]

Thank you 😁

[@BuildingFromScratch]

I love these kinds of videos, I just wish there was a way to get the plans to build this. I would pay for them.

[@sudhirpatil3434]

I learnt lot-lot by watching your videos! Thx

[@douglasbattjes3991]

Found the video I wanted, Great work and love it

[@WorkshopFromScratch]

Thank you 😁

[@robertbutler8004]

The further you get away from this belt grinder the better it looks!!!

[@robertbutler8004]

Younus Dar if you meant looking at it from another town I agree!!

[@حسين-ج9ط7ي]

Great job, thank you brother. You are so talented

[@fariduddinpirzada9676]

Very nice work in belt grinder wow awesome idea I realy like this homemade belt grinder I sulute you 👍👍👍🤝🤝🤝

[@WorkshopFromScratch]

Thank you 😁

[@ktmxkid243]

That is one of the best I have seen. I would love to build the same thing. Any chance you would provide some measurements and other necessary information? I am willing to pay for the info. Thanks for a great video.

[@WorkshopFromScratch]

Thank you :) I give you a link to the photo with dimensions :) photos.app.goo.gl/uBezatsurbhpagJaA

[@طائرالورور-ص4ت]

nice job , bravo from middle East 🤗

[@WorkshopFromScratch]

Thank you 😀 Regards :)

[@thetech8018]

Wow! Beautiful work!

[@omarbaalwi3544]

Well done 👍 was excellent easy information

[@jamesfield5346]

Yup, I am going to construct me one of those. All I need is the steel, a welder, and hardware. Lmao

[@ctpctp]

Nice design. Just a note for people who are gonna build one after seeing this...you DON'T need THAT much weld bead on stuff!!! You'll probably save yourself a week of work and $50 in wire if you just weld things as much as they actually need to be, LOL :-D

[@richarcruz7843]

💪🏽💪🏽💪🏽💪🏽💪🏽wowwwwwwwwwww keep putting up all this great content man ure incredibly talented God Bless💪🏽💪🏽💪🏽💪🏽

[@TrucTran-sy2ev]

Awesome.. Neered more design details pix👍❤

[@benmiller5015]

Very nice. Love the adjustability n using a ram instead of spring for tension. Maybe down the line you can wire in a potentiometer or a step switch so you can adjust the speed. Another great build though. I want one

[@WorkshopFromScratch]

Certainly adjustment would be useful and I will try to connect :) Thank you for the comment :) Regards

[@wireedm1]

Great work. Next time you might consider plasma cutting the radial slot.

[@richardtullius6419]

I like the use of the jack.

[@danzigii8342]

Your the friggin man this is so cool . Bravo genius genius !

[@MrKim524524]

Great video one of the best belt grinders I have seen and also it looks easy to build with scrap metal

[@WorkshopFromScratch]

Thank you very much 😀 Regards

[@silvergrizzly316]

Very creative and nicely done!!! I thought I had been unsubscribed from Made in Poland for a minute...😁 New Subscriber!!!👍👍

[@WorkshopFromScratch]

thank you very much 😀 Regards :)

[@TheHillbillyEngineer]

Nice Spark Generator you built :)

[@WorkshopFromScratch]

Thank you:)

[@jamesfield5346]

What an ingenious idea. Use a scissor jack to assist placement.

[@nk_3535-p1u]

Very nice work. Congratulations.

[@WorkshopFromScratch]

Thank you :)

[@balazskis8051]

Beautiful work respect😁

[@MatthewTaylorAu]

I like use of the drill press post as a stay to secure the plate when drilled. It's the small things that help. thanks for the video.

[@ISOSAILING]

right that's it i realy need to get in the shed an start makeing stuff again!! been wanting to make one off these for ages as i make swords and knifes and i gring the blades on a cheep buggerd belt sander i now have to atach my drill to to get it to work!! that said it dose work fine could do with a bit more power though, not to much or i'll loose my fingers haha, love you videos!!

[@arturlend2297]

Dobra robota, szacun za wykonanie 👏👍

[@WorkshopFromScratch]

Dziękuję 😀 Pozdrawiam

[@omarbaalwi3544]

Excellent experience well done if I try I can do but I never done my self 👍👍👍👍👍👍👍👍👍

[@WorkshopFromScratch]

The most important thing is to dare and undertake construction and you will certainly succeed :) Thank you :)

[@karolthiesen4707]

Good project to make with my everlast welder and some scrap metal. thanks for this.

[@jamesfield5346]

Oh, and the plasma cutter. Can't forget that.

[@lance3883]

WOW!!! You put about 10 times more weld than actually needed. but it's an ok idea...

[@حمزةحمزة-م4ف4ض]

Cool work 👍👏

[@WorkshopFromScratch]

thank you 😀

[@حمزةحمزة-م4ف4ض]

@@WorkshopFromScratch and you 👍👏

[@anoncode4660]

Nicely done. Thought this was made in poland at first.

[@WorkshopFromScratch]

Thank you very much 😀

[@V8PropaneBurner]

I was confused at first too. The paint was the wrong colour...

[@RS-93551]

bottle opener. perfect.

[@WorkshopFromScratch]

thank you 😀

[@cocospops9351]

Nice work man. Almost identical to mine except I used treadmill motor and speed control☺ One good thing to do is get some ceramic stove glass and attach to your platen (double sided tape and small "shelf" beneath it) Otherwise over time you'll wear into it 😉

[@WorkshopFromScratch]

You had a brilliant idea with mounting the treadmill motor, it's a pity that I didn't think about it myself :) Thank you :) Regards

[@cocospops9351]

@@WorkshopFromScratch Yeah it works very well and there is always a large flywheel on it that can be used as the drive wheel ☺ Speed control is nice so wood doesn't burn from high speed. Subbed to see what you come up with next and greetings from Ireland 🍀

[@WorkshopFromScratch]

In the case of woodworking, speed control is very necessary, I also need to mount speed control because maximum speed is not always needed :) Greetings from Poland :)

[@cocospops9351]

@@WorkshopFromScratch Treadmill motor is nice because it's dc so easy enough to control speed. If your motor is ac, maybe look at a variable frequency drive (Google VFD) 👍

[@YoussefMekin]

Great job!!, and most of all, thanks for sharing your pics with the measures!!. That will help a lot. Keep it like that!!!💪

[@filipstrelicak5227]

Where can i Get photos and plans please?

[@YoussefMekin]

@@filipstrelicak5227 I believe I got them from the video, there were pics I can´t see now, send me your email and I'll send them to you as I saved them by the time.

[@MCsCreations]

Amazing job, dude! Really nice! 😃

[@WorkshopFromScratch]

Thank you 😀 Regards

[@4BoltClevo]

absolutely love the colour scheme. I'll be starting my belt grinder soon and I'll be hard pressed not to do orange

[@SouthernEngineering]

Great project, sorry I missed your premier, had to work.!.

[@WorkshopFromScratch]

Thank you very much 😀 Regards :)

[@MyMihhail]

Видео огонь 🔥, особенно порадовал конец, лайк и подписка однозначно!))

[@КОД66]

привет от русских

[@alexsMC117]

Great work.

[@WorkshopFromScratch]

Thank you :)

[@kazykamakaze131]

You have a plasma cutter, so when you want to make those degree plates just take a piece of flat bar and drill 2 holes, 1 for the plasma torch and one for where from a center point your anchor will be, then just attach your flat bar to your anchor point and put on the torch and turn the bar. This way you'd be done in 1/100th of the time compared to drilling holes and filing.

[@WorkshopFromScratch]

Thank you for the hint :) My plasma was damaged and it was at the moment and I had to do without it. But thank you very much for the advice, I like comments that say how to do something in an easier way:)

[@pasqualefarinella7845]

Bravissimo❤️👍👍👍👍👍!!!

[@gusmoyano]

Man that works it's amazing, I'm from Argentina, I would like to try made one for me, it so possible to have we plans, to take the rigth measures. PD: THANKS for share this videos

[@thietbidienphuquy]

Good job❤❤❤

[@chebi2906]

best belt grinder ever, gooood job

[@madeingarage7040]

Bardzo dobra robota. Świetna maszyna do dalszych prac.

[@WorkshopFromScratch]

Dziękuję 😀 Napewno usprawni pracę nad kolejnym projektami:) Pozdrawiam:)

[@chandanpiku]

Beautiful...... especially it's 45 to 90 degree inclination and vertical to horizontal setup

[@WorkshopFromScratch]

Thank you 😁

[@TheKPEMEHb]

Недавно подписался на канал. Этот умелец токарный станок ещё не собрал?? 😉

[@carloszamoralopez4188]

Me gusto la explosión de la cola; jajaja muy buena ; tu diseño esta excelente .. saludos.

[@lukii1215]

szlifierka pierwsza klasa !! Profesjonalna robota

[@WorkshopFromScratch]

Dziękuję 😀 Pozdrawiam

[@homemadetools]

Good job. Ya gotta build a belt grinder; it's a rite of passage! Feel free to embed your video on our homemade tools forum :)

[@CaptHenry26]

Awesome, now you just need a forge. LOL

[@Shane72634]

This is far the best precision engineered belt sander I’ve witnessed on KZbin. Do you have the dimensions on how to build one? As I’d gladly like to craft a replica out of stainless. I work with stainless you see. Best wishes.

[@DanKoning777]

Hey Shane; I liked and enjoyed this build as well, but if you're interested in a belt grinder build that truly out does them all, here's pt 1 [below]: Granted; in order to duplicate this build you'd need more than just DIY hand tools, but even so a version of this could be built on some level. Anyway it's great just watching + there's many good ideas. Enjoy! kzbin.info/www/bejne/nZKsh62af5eJa9k

[@hibahprice6887]

The size does not matter here, the main ratios and angles are on the Internet

[@TomSommer]

Wow! Great job. Thanks for sharing.

[@AlexLTDLX]

Wow... that thing is amazing. Great job!

[@WorkshopFromScratch]

Thank you 😀

[@MadeInGarage]

Good job!

[@WorkshopFromScratch]

Thanks :)

[@0paulk]

Lustig meiner sieht fast genau gleich aus und ich hab auch nen Hochdruckreinger Motor

[@עופרכהן-ד2ת]

וואו איזה עבודה כל הכבוד לך

[@golokabumasud8289]

Very good job .... from indonesian.

[@WorkshopFromScratch]

Thank you :)

[@santosmelendrez5048]

Maravilloso trabajo amigo saludos

[@felixmalan1961]

Great Grinder - where may I optain plans or measurements?

[@WorkshopFromScratch]

Thank you :) link to the photo with measurements :) photos.app.goo.gl/uBezatsurbhpagJaA

[@jayshreesawant5389]

hey .. its good... safety gard required to avoid accident after belt failure..👍

[@carlosrosario355]

Excelente herramienta y donde se consiguen las medidas de las piezas

[@edwardcartwright8658]

Great video a job well done I have a question to ask do you sell any of your items

[@khalidahmed4230]

You are creative and I hope to be friends kindly did not mention the measurements for this machine I will be thankful if you send me the measurements for this machine .... Thank you

[@WorkshopFromScratch]

Thank you 😀 here you have the link to the photo with dimensions :)photos.app.goo.gl/XfgHNkV64nLdBSo67 photos.app.goo.gl/6MuXYUweF9J2d9Du7

[@hosseinkhodakaram8554]

ماشلله به این همه هوش👏👏🖒

[@garythompson9727]

Dear Sir, Nice video. I have built a similar 2 x 72 grinder. The Tracking Wheel assembly on mine has not worked out very well. Your piston type assembly might work for me. Can you tell me where you got your's and maybe I could adapt it to fit my unit. I would greatly appreciate any help.

[@allenhunt3070]

Probably mentioned already. Your motor has unshielded bearings which will allow metal dust in and you'd want to prevent that. If the bearings bind up, it might score the shaft, etc. Nice build!

[@paulmanger5522]

Good job 👍👍👍👍👍

[@streetfoodwithfoodiesfwf]

Great job 👍 kindly send me measurements of your project