Making Slotting Machine

[@charleskutrufis9612]

Very good fabrication skills. I have a shaper but would like a vertical slotting machine, you have given me some useful ideas. Thank You

[@garymucher4082]

I am sure it took you longer to build this machine than merely hand filling a groove. However, now you have a excellent machine to do other grooves and splines on outside or inside situations... Thumbs Up!

[@WorkshopFromScratch]

Thank you 😁

[@johna7661]

No, it was the same amount of time for it was way more fun than the pesky hand file! Nice machine!

[@Destros2ndone]

but now he never has to file again ^^

[@SuperSempak-e3g]

Before make inner diameter for shaft, First drill it at the right position of slot, use AutoCAD to precise position, drill it with small drill at slot corners (2 diameter is okay) then drill it as slot dimensions required, make bore as shaft diameter request, then use a file to smooth out any remaining drill marks, I think it will help a lot

[@raysimon1368]

That was a great build nice machine will come in handy wish I would have seen this 50 years ago great job

[@WorkshopFromScratch]

Thank you 😁

[@Uswesi1527]

Undoubtedly, the master craftsman had reinvented the wheel . Thanks

[@Orgelfan62]

In Germany we call it Stoßmaschine. Well done, this Machine works nice

[@SeanHodgins]

You should add a clapper to the cutter and face it downward, like a shaper!

[@hilarysingh8191]

What a good mechanical work you have done by making a slotting machine for engineering work this will give a new dimension for our future .You are blessed with unique kind of engineering work which will be remember a very long time history.

[@yeagerxp]

I think you and your friend at made in Poland are having a friendly competition. Did you see his "Over engineered spray can shaker" 😱😵‍💫🤣 Good job 👍👍👍Thank you for sharing. Be safe 🇨🇦

[@thomasstover6272]

Very nice work! I truly appreciate your drive to build machines!

[@francesco_maggio]

Magnifico progetto amicone miooooo😍😍😍 Onorato di imparare da te. Sei un vero MAESTRO

[@WorkshopFromScratch]

Grazie 😁

[@hanyhashem6040]

👍👍👍👍 You are really more than wonderful Innovative, smart, and your ideas are organized But what attracts me the most is the equipment and machinery in the factory I wish I had one like it one day

[@MirosawJedrzejewski]

Po❤

[@lucasmunoz1272]

Hermoso trabajo. Increíble. Sos un obrero totalmente calificado y cualificado. Me sorprende los detalles que, pudiendo hacerlo simple, lo haces con gran excelencia, como las manijas de avance. Realmente es muy satisfactorio verte trabajar. No tengo el dinero para unirme. Pero me suscribo y pongo like. Te mando un gran abrazo desde Argentina.

[@rickyshuptrine2831]

This guy is really good. I would like to see him build a crank shaft balancer for V8 engine since it doesn't seem anyone else has done it.

[@damojfowler]

My wife wants one of these, no idea why... She doesn't even do metalwork.

[@nikhasmadi3314]

😂😂😂

[@fashachannellove]

😮😮😮😂😂😂😂

[@ztyy8185]

She can buy THAT kind of machine, it is more gentel and doesnt cut anything...

[@emekodo]

​@@nikhasmadi3314😅😅

[@VitaliiLuhovskii]

😂😂😂 👏👏👏👍

[@MilanaRein-l1y]

Невозможно читать пошлые комментарии!!! А станок получился очень аккуратный и отличного справляется с поставленной задачей!

[@Bobs-Wrigles5555]

Very interesting build, Well Done. But why the horrible grunching noise at 16:53 when the speed reduction box output wheel goes through 8 and 10 o'clock, is there something wrong inside or is something interfering? It only makes this noise on the forward to reverse changeover stroke, ie when the tool bar is the most extended, there is no noise when it goes from reverse to forward ie when the tool bar is least extended and it not cutting anything yet.

[@opendstudio7141]

That took some time to engineer and source parts for. Personally, a set of keyway broaches would have been more practical, but not as interesting as building this shaper. 👍

[@rascalwind]

You should stop while I still have enough time and energy. I'll end up in the shop all night trying to duplicate this thing and won't get anything else done.. Great work!

[@BITTYBOY121]

Perfect ! - Well done - Very, very useful machine which is similar to a shaping machine - I think I need to build a key way cutting machine like yours ! - Love it ! ❤

[@dogukan4093]

It was so fun watching you work 👏

[@Tuckaway]

Excellent substitute for a shaping machine if you have lots of keyways or splines to cut.

[@LeutTwostars]

Your industrial, planning, design, execution skills are extreemly valuable. I am wondering what kind positions the world value your skills in ? My opinion is somewhere very high in the industrial world, even the inventor level CONGRATS. you can create ppretty much what you put your head to. I will definitly follow your channel.

[@fly3209]

very good project and very useful !!! well done

[@OGeki]

Hi, but what happened to the video of the wheelbarrow with motor that you then made with the hydraulic skip? It's no longer on the channel

[@Sryously]

An offer to mass produce? A problem with a component or design problem that didn't come up till some use? I don't know if I could ever make such a thing but a power wagon would be nice and not have to pay for some big brand one, I remember the drive axle stood out, looked familiar like from a zero turn mower or something.

[@OGeki]

@@Sryously Non mi sono spiegato mi stavo riferendo a un video che hai realizzato anni fa tu, non so come definirla ricordo che hai fatto la parte due dove rendevi il cassone idraulico, ricordo che hai utilizzato il volante della fiat 600

[@stevew3226]

Impressive work bud... I bet all that steel and kit to build it wasnt cheap... great if you have lots of splines and slots to cut.

[@olens.6987]

you are sharper than a sewing needle !

[@nguyenhuuvinh8083]

I come from Vietnam hello. You share many beautiful and useful products. I would like to have a specific drawing of the lift table. Thank you ☕👍

[@joshtheis69]

That looks totally wicked Awesome bro

[@WorkshopFromScratch]

Thank you 😁

[@markmccain1474]

You always make it look so effortless…. Great job!

[@WorkshopFromScratch]

There is always some effort, but I try to show the work in a way that encourages others to build similar machine 😀 Thank you 😁

[@RustyInventions-wz6ir]

Very nice machine. The sort of machine that I would build he he, although I have not have much of that sort of content yet. Good job

[@WorkshopFromScratch]

Thank you 😁

[@romeo35alpha38]

The stroking shaft, is that reversible, or the 3 jaw component removable? And can you attach toys to the stroking shaft? Wife wants to know...

[@henrykleyn3423]

Great project. Thank you for sharing.

[@MattPlaysRs]

Cool stuff! I'm sure the wife would appreciate the machine in a slightly different configuration too!

[@MCsCreations]

Fantastic work, dude! Really amazing machine!!! 😃 Stay safe there with your family! 🖖😊

[@WorkshopFromScratch]

Thank you 😁

[@WildmanTech]

Nicely done! I need to build one!

[@MedSou]

*Very nice job* 👍👍👍

[@udosinger603]

Eine sehr schöne Arbeit!😃😃😃

[@phillipchambers8487]

Awesome Design & Build What Brand are your Countersinks? Those are the Best looking Countersinks I’ve ever seen for Metal Work.

[@dav1dbone]

I'm thinking you could add gear cutting to this, even for small gears it would be useful.

[@BITTYBOY121]

Yes, an Indexing/dividing attachment could well be added if he wants to cut gears...

[@hersch_tool]

Epic fab skills! And respect to anyone with a jig bore.

[@WorkshopFromScratch]

Thank you 😁

[@vinceianni4026]

Good job mister beautifully made well done

[@WorkshopFromScratch]

Thank you 😁

[@ВладЖ-к2п]

Шпоночный паз можно легко сделать на токарном, а это рукоблудие для того, чтобы потешить самолюбие.

[@madeingarage7040]

I praca staje się łatwiejsza😊 Good job

[@WorkshopFromScratch]

Dziękuje 😁

[@bradgeary3467]

so what’s taking the cutting load on the work holding chuck? the 1” or so shaft on a (taper) bearing in the gear reduction box? what if your cutting slot on large radious part? seems work holding may be not great? hard to tell. would a horizontal/vertical rotary table work well too? they are offered with dividing plates and even electric\cnc controls. and they have axis locks as i’m sure you know. welding on your jig bore table? your a savage. nice build. sweet shop. mad fab skills. need me one of them. what kind of tool holder were you using for that slot cut?

[@Ricqu]

5:12 cross threaded that one?

[@DanKoning777]

Well done and a 👍as always. With any new design/build, it's likely you'd make small changes after a time of testing and use. If you do make changes with this or any other project, a video of you pointing out those changes as you address them would be great additions to your other channel-Infinity Garage. Just a thought. God bless.

[@WorkshopFromScratch]

Thank you 😁 I plan to add such videos to my second channel 😀 Regards

[@erpu812]

Ło Panie! Konstrukcja jak z fabryki! RESPEKT MISTRZU :)

[@WorkshopFromScratch]

Dziękuje 😁

[@NehemieNaindouba-vl7lz]

J'aime ce travail❤ vraiment je suispassionné si c'était tout près de chez moi.merci travail

[@GBWM_CNC]

Nice and simple. Great job!

[@WorkshopFromScratch]

Thank you 😁

[@erikbraguim4288]

Muito bom trabalho , para ajudar fazer o serviço de corte faz uma maquina de serra fita bancada na vertical , invés de você usar o policorte , te garanto que o serviço te renderia muito mais.

[@screwsnutsandbolts]

Excellent job 👍

[@WorkshopFromScratch]

Thank you 😁

[@screwsnutsandbolts]

You're welcome !@@WorkshopFromScratch

[@robertocentonze9653]

Perfetto e robusto, credo che sia il massimo che si possa costruire, io avrei provato anche a fare altri fori sul volano a distanze diverse dal suo centro per variare la misura della corsa di biella. 🤔 Comunque complimenti per il bel lavoro e video.👏Un saluto da Roma.

[@muhammadharoonkhan6989]

What is the price of this laser welding machine and where it is available online?

[@Krzys_D]

the painted seals on the worm box will harden the seals prematurely and cause oil leaks, might want to change them out.

[@filopat67]

14:50 Wait! How did you make the keyway slot to that?

[@encompassthyeclipse7278]

shhhhhhhhhh lol

[@yeagerxp]

He went to his friend at made in Poland 🤣🤣🤣

[@PolymerSandTechnology]

Very nice work!

[@javierclemente2420]

Es muy bueno el trabajo tenes un montón de máquinas para hacer, muchisimas cosas. Lo único que me dolió es como usaste el calibre para trazar.. 😣

[@jeanfelixcastagne4624]

Il y en a qui sont doués, BRAVOS.

[@SuperSempak-e3g]

Before make inner diameter for shaft, First drill it at the right position of slot, use AutoCAD to precise position, drill it with small drill at slot corners (2 diameter is okay) then drill it as slot dimensions required, make bore as shaft diameter request, then use a file to smooth out any remaining drill marks, I think it will help a lot and faster

[@ozzybusey575]

Wholly cow. Does it double as a log splitter? It’s pretty cool.

[@ВячеславРедкокаша]

я старый моряк дальнего плавания. в моё время не на всех судах были станки для подобных работ. я учился у специалистов, которые в войну перегоняли пароходы из америки. шпонпаз подобный этому мы делали при помощи ножовочного станка и крейсмеселя. много времени не требовалось.

[@Kekihavelhinho7444]

Excelente trabalho 👋👋👋👋👋👋👋👋🇧🇷

[@thefalconace]

Master man ship 👍 but caption was not right you did made 90% home made other 10 is not you made buy your self 😂 like motor and other main part I don't know the name of that thing which keep holding things in center , but over all I really love to watch your master work its very clean and show your class , keep going and or spreading knowledge to this world , more to come GOD BLESS YOU 🙏

[@SaroCata86]

That's a great job ! Is the internal tube made of brass?

[@BITTYBOY121]

Yes, That is a brass bearing/bushing he has gone for in order to give his machine better long term durability and get his machine to run smoothly... as brass and copper are excellent bearing material for reciprocating/stroke actions.

[@erikbraguim4288]

Parabens pelo trabalho , mas vc poderia fazer um serra fita bancada vertical ao inves de usar o disco de policorte nas chapas de ferro adiantaria seu servico

[@VitNg-vl9ek]

I think all machinists make miracles....😁

[@phillipchambers8487]

@Workshop From Scratch, Great Video and Build. What Brand & Model is your Horizontal Band Saw? That’s a very nice looking Saw. I’ve been looking for a good Band Saw for Fab Work. I think this one would do nicely!

[@hyper_active_snail]

How are the two ends set to be level along the center axis?? The chuck holding the piece and the boss holding the piston.. I watched the video twice and didn't notice how you set up them level... nice work as always though

[@ulbed]

15:36 there are slotted holes for height adjustment of the reduction gearbox. Same for the other axis. I wonder why he didn't add a pawl/ratchet mechanism, like a real shaper does.

[@SENEJAMZ]

I AM OVER 50 YEARS OLD BUT I WOULD LIKE TO BE YOUR APPRENTICE !!

[@x5or]

Great footage 👏

[@SELIM.42]

What are the specifications of the engine you use?

[@mohdeffendi1899]

From the title i thought he want to build a slot machine (casino) 😂😂😂

[@ranjitsian5481]

Good work 👍

[@Dirksechzehn]

Very nice build...but the major disadvantage is that the tool has no guiding in the bore hole. So it will be pushed away, that's why you can only make veeeery little steps. In a worst case, the cutting tool might jam on the flange and break or bend or something breaks. Why not use standard reaming tools with just an x movement of the support?

[@РоманБерначенко]

Столько времени, сил и материала, для изготовления такого оборудования, рационально лишь в том случае, если изготовление пазов под шпонку необходимо по несколько раз в день😮

[@Az_gamer_6688]

Точно, тем более что при расточке внутренних шлицов расстояние придется " на глаз" подгонять измерительных приспособлений не предусмотрено. Готовый станок думаю не сильно дороже бы обошёлся

[@DesmoGabe]

Crazy genius!!!

[@tedbastwock3810]

This is an amazing machine, superior fabrication skills as always! Forgive me, but I dont understand how it works. Does the cutting bit have to move deeper and deeper into the groove as it cuts? This is well above my abilities of what I might ever do, so maybe it doesnt matter if I dont understand, but I definitely enjoyed watching. I know it is impossible for you to make this many videos, but I would happily watch 3 hours of your videos every week. Thanks for sharing!!!

[@jorgeconcheyro]

if you look at 16:57 the complete view of the machine, you'll see a handle on the right side. When you turn that, the cutting tool (and everything else) will move "to the left", making the cut deeper.

[@tedbastwock3810]

@@jorgeconcheyroAh, makes sense, thanks!

[@евгенийуваров-т7ш]

КРАСИВАЯ РАБОТА! скажите почему выбрали горизонтальное расположение этой машины?

[@StillOnSteel]

Świetna maszynka! Super robota!

[@WorkshopFromScratch]

Dziękuje 😁

[@ДенисЗайцев-э1ф]

good machine but there is one major drawback. An industrial machine retracts the cutter every time it moves backward. This protects the cutter from wear.

[@hu5116]

Wow! A bit overkill I should think (3 phase power no less!), but better overbuilt than under built I suppose. Nice job!

[@WorkshopFromScratch]

Thank you 😁

[@BaboonTV2]

Great job. Thank bro!!

[@n9viw]

AMAZING! Your genius never ceases to astound me.

[@michaelbabatunde3915]

Very good one

[@mrgod5139]

@17:30 the pumpings is so amazing that it needs multiple scenes to feel the excitement.

[@YoniRios-e7j]

Buenicima la pura crema 😁👍👍👍

[@biker5268]

Belle réalisation 👍👍

[@protuslumbasi9356]

Wow so amazing,i love it

[@engineer567]

Super job bro

[@arturlend2297]

Ciekawy sprzęt i ładne wykonanie 😎

[@WorkshopFromScratch]

Dziękuje 😁

[@afshinzamani9305]

Skillset is phenomenal. However, I would never make such a machine while I can buy a broaching set for a 200 $ installed on a handpress that is for sure more efficient than this machine. Great content btw.

[@yeagerxp]

He makes money as a KZbin content creator. This video will make money, and he can always use the parts on another project if he wants

[@saadyzuleyman7138]

Excelente trabajo.

[@mahendragadhavi6811]

You make mini lath M/C too.very simple key hole M/C Love from INDIA.

[@gwharton68]

You have to be the only person in the world that uses a MOORE jig grinder as a drill press.

[@WorkshopFromScratch]

Świetnie sprawdza się jako wiertarka, nie wiedziałam, że ma inne funkcje 😁

[@VidadeDinossauro]

Belo trabalho.... Você e um gênio

[@andrea.S..]

Ottimo lavoro, ciao👏💪👍

[@WorkshopFromScratch]

Grazie 😁

[@SteabhanMacGR2]

Incredible talent

[@wajidyoutuber4555]

Very good video Like it

[@NSUGS]

0:17 I was fully expecting a finger wag. Kinda disappointed, but warmed my heart you didn't.

[@randallsemrau6911]

Yeah, the finger wagging is so condescending to viewers. I hate it.

[@osamaalshami-tj8en]

You are smart😊

[@samiam7]

How does it move left and right?