Handyman's Don't Want You To Know This! Tips & Hacks That Work Extremely Well

[@workshopinsider]

kzbin.info/www/bejne/f2nbdqp-hr94pq8

[@SfhjjFghjki]

NOUS APPRENONS AUJOURD'HUI Et DEMAIN NOUS ESPÉRERONS

[@elenitacedeno268]

Fabulosos...!!! Muchas gracias por compartir tus conocimientos...!!! 🌿🕊️🇪🇨🇪🇨🇪🇨😇🙏🤩🤩🤩(⁠◍⁠•⁠ᴗ⁠•⁠◍⁠)⁠❤

[@ДинаХанина]

👍👍👍 Идеи так и фонтанируют!!! 👏

[@lynneclark5313]

Very informative! I've got a tip for when you are stripping wire: after it is cut around, put the insulation off slowly, twisting as you go. This gives you a tight twist, ready to insert or tin [add solder].

[@myanu0072]

On the door hinges, leave about 1/2" of the nail without head. When it goes into hole in door frame, door can't be pried open................. ALOHA

[@EhrengardB.]

Super Vorschläge! Leider etwas zu schneller Ablauf, so daß immer wieder "gebremst" werden mußte. Trotzdem klasse! 👍

[@cherryhome68]

The video demonstrating handy tips for crafts is very interesting and useful, I support your channel 👍👍

[@irisbarahona7608]

Me pregunto: para q puso el envase con Coca cola a girar?! No le encuentro sentido, si alguien me lo explica xfa, gracias 😅

[@gabrieltokes3556]

Superrr!!!Mulțumim ptr idei !!SUCCES IN CONTINUARE!!!😊

[@HiroshimaMS]

I would like an idea of how to make a reducer/adapter faucet for a tap but without using metal cutting machines, something within everyone’s reach.

[@dr.prahalladbhaipatel8985]

😊😊

[@rasungod0]

3D printing

[@elenitacedeno268]

Hooolyyyy saludos bendecidos desde Guayaquil Ecuador. Bueno ahorita vacaciones en OLON, Provincia de Sta Elena...!!!

[@joseluisbarrera3222]

Muy buenos inventos

[@Diy-Mr.v]

This idea is so smart! Can you share more tips for beginners?

[@raizaborges5770]

Biuathiful 👍👏👏👏👏

[@khalidhameed3696]

Super tips fully appreciated

[@MauricioFlores-z4x]

Muy buenas ideas exelentes bendiciones familia

[@karakantouvalos]

Too many tricks for one guy to know! Most of them are really useful! Congratulations!

[@MamieMyjo]

HELLO DE LA FRANCE ! .... Tu n'aurais pas une astuce pour réparer une pompe à oxygène deux sorties pour aquarium = J'ais toujours une sortie qui me lâche au bout d'un an ou deux ?...

[@noeliacollado2689]

Nice work and tools

[@JusticeCamera]

awesome, your video is so good

[@Sylvie-Caroline]

You say it is awesome, but have you tried them ?

[@JusticeCamera]

@@Sylvie-Caroline 😍😍😍

[@utamear-Official]

Kreeeennn..👍👍👍

[@ghostfox3560]

My boss calls me goofy for overcomplicating things, but I just spotted a video that overcomplicated so many things I never thought of... I hand over my Ruthe Goldburg crown to you, sir/madam.

[@CreativeTopTrick]

The approach taken is clever, creative, and highly practical. The innovative ideas introduced are commendable and demonstrate a strong understanding of the subject matter.

[@yoshayra]

I love all those tricks because now at 56 years old I have more time at home Thank you very much for everything 🇩🇴

[@devereegreenwood3872]

🤣I LOVE THESE VIDEOS!🥰

[@فىبيتناسارة]

Fantastic ❤🎉❤❤❤❤

[@DesmondMorta-v1n]

Very smart 🤠 from South Africa Cape town Mitchell's plain 🤠

[@YehiaHab]

Sos un genio¡!¡!me diste unas lindas ideas.Gracias desde Argentina cón cariño👍👍👍

[@SfhjjFghjki]

ÉTONNEMENT...EST meilleur ami BRAVO...ENCORE..COMPORTEMENT INTELLIGENT....

[@GrishmaKhadapkar-fn2pm]

Very nice

[@B_TAHKE_34]

Не всегда удаётся понять результат ... (

[@timothytremblay7763]

50/50 some innovative great ideas and practical, others impressively non-sequitor/ frilly. ✌️😎

[@planetx2933]

Very impressive! Ty!

[@jesuisla-dc8tr]

I like the tooth brush jig its epic

[@Haos-f2i]

И куда подключать ножницы с батарейками ,на какие концы мини usb?На + и - ,или на информационные?Какую роль играют батарейки?

[@seiseich3341]

👍👍👍👏👏👏

[@MattNochajski]

As a carpenter I can’t take these videos seriously but I can’t stop watching them they are hilarious

[@marlipiresdemoraes7792]

Muito bom,thanks.

[@xyz10humble27]

Your tricks are so good. Please slow down so we follow you correctly.

[@Sylvie-Caroline]

to slow down and choose your speed, just click on the parameter icon (the gear wheel).

[@fleuredeschamps9393]

Vos astuces sont génial Merci pour ce vidéos

[@HighOne7]

Always fresh ideas! ❤

[@rt2gp]

Kereen luar biasa, 👍👍👍

[@DYIIdeas]

Great video, very informative, I can learn a lot😁😁

[@ЛюбовьМатковская-е9д]

Все очень классно, потрясающе!!!

[@JohanBudiman-z4h]

Terimakasih Master kreatif telah berbagi informasi nya menambah wawasan kita semua 👍👍

[@DIYGeniusHub-fm2gx]

These are some wonderful tips . Loven this .

[@천병문-g3l]

2024년 맥가이버....?

[@anhthuhuyofficial]

Nhiều mẹo hay giúp cuộc sống đơn giản hơn rất nhiều ❤

[@BHK_DIYAtHome]

very helpful video

[@investigatechannel]

how is it possible that people with a fully equipped workshop have to resolve to "make themselves" tools like these shown? (is like I show you how to make a "DIY/homemade hammer easy and cheap with things you find literally everywhere" , you just go to the smelting furnace and fill up a crucible with molten iron, poor it in a sand mold and wait for it to cool down, then take it to the forge to make it into a hammer head, then drill a 1inch hole in it with a column-drill and just put it on the end of an oak stick which you can easily shape with all variety of saws and sanders, secure it with a couple of screws and deep the head in water for a while and there you have it), budget for the equipment 150.000-200.000€ workshop to make a 3€ hammer, just can about call it "DIY" because it all happens at your own garage in your 2.500.000€ countryside house. all these "easy-peasy" kind of videos crack me up big time, if someone knows any channel where they really make interesting (time-worthy) stuff with "real tools every home must have" please let me know.

[@fernandopiruat8448]

I😊

[@DhulfiAl]

من انت بطل بمعنى الكلمه

[@ИванИванов-ъ9я8ц]

Да многофункциональная зубная щётка😂😂😂

[@khounparadis-b2t]

Best video

[@thebeholdingeye2843]

I've been in Maintenance for over 16 years, and some of this stuff is just dumb...

[@Sylvie-Caroline]

DUMB = idiot en français

[@suhayl5157]

most of these hacks are not practical; the rest not clear what they do.

[@ИванИванов-ъ9я8ц]

Ну нет савком я ещё окна не мыл. 😅

[@999magandi]

Не спорю... есть толковые вещи для начинающих.... преподносите как рекламу.... или наиборот.... тяните ничего не стоящее... ради просмотров...

[@tanganterampil]

Nice

[@MT-Tips6688]

Goood❤❤❤❤❤

[@EBIYEDOA9]

Super mantap

[@Evgeniydolivo-dobrovolyskiy]

Кабельные наконечники набитые молотком это предпосылка к пожару!!!

[@Evgeniydolivo-dobrovolyskiy]

Нельзя прикасаться к токоведущим жилам режущим инструментом с углом заточки менее 120°,только шлифовальная бумага или специнструмент!

[@Berry-Dingle]

nice toothbrush with 3 bristles... 😑

[@Craft4LifeYouTube]

Wow 😍

[@rt2gp]

👍👍👍

[@janazorek]

like ok

[@vuvu3401]

thanks!

[@mohamedmosaad551]

افكار رائعه بس للاسف سريع جدا جداGreat ideas but unfortunately too fast, way too fast.

[@silvaandre1881]

🇧🇷👏👏👏👏👏👏👏👏👏👏👏👏SIMPLESMENTE MEGA SENSACIONAL , CABEÇA NÃO FOI FEITA SO PARA USAR CHAPÉU . PARABÉNS AO BELÍSSIMO MEGA VIDEO. 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

[@GhousePerways]

Good one

[@BijanHayati]

بسیار عالی

[@CarlWinter-oy8uf]

Why the clothes pegs in chapter 6 ?

[@ValeriyPotin]

Муз. Сопроввождение г...но

[@hatchet646]

are you fing serious lmao 4:43

[@WendigovanStudio]

Did you miss the reveal at 1:56 lol. They lefted the metal sheeting up and pushed the so called cut out wood under it pmsl

[@peterbaruxis2511]

@@WendigovanStudio Holy sh**, I had to watch that at 1/4 speed. LMAO !

[@bassfan41]

2:48 wth?

[@robertkat]

So why are you telling us if we are not supposed to know?

[@ajitkumarshirodkar3517]

Very fast to understand 😮

[@rass0747]

Ради хайпа и просмотров, всякой ерундой занимаетесь

[@ИванИванов-ъ9я8ц]

Когда пить бросишь тогда и ключ перестанет прокакивать мимо болта

[@reallee5331]

I'm a handyman and I don't want you to know these tricks and hacks that work 🙃

[@saratpanda91]

From where the tools you use a common man can get ?Is your inventions for only mechanics.

[@Expedient_Mensch]

What's the fully laden capacity of a broken off pen in a wall? African or European? Asian.....

[@carlonchoharry]

El final de cada motivo es muy abrupto. No se puede apreciar bien el resultado.

[@mariaarenizramirezchacon6157]

el último salió un aviso un aviso que no dejo ver lo de las pilas para el el control, pongan el aviso en una esquina q moleste para ver lo q hacen y gracias

[@holgerinehalfmann3110]

How can I seperate the Music from this Video to store it in my Tablet to use IT in my Video?

[@JohnMolesse]

the link at the end of the video is completely hiding what's going on the screen...

[@LindaSwenser]

The toothbrush one didn’t make any sense most of the brush was gone

[@SfhjjFghjki]

TRAVAILLONS UN PROBLÈME STIMULONS LES NEURONES

[@ricardoamorim8448]

Só gambiarra que nao serve pra nada

[@CarlWinter-oy8uf]

CHAPTER SIX ----SOMETHING VERY WRONG ---HOW CAN U CUT DEAD PARALLEL?

[@ИванИванов-ъ9я8ц]

Ну если руки дрожат после перепоя ничего не поможет.

[@jeanclaudeguillaume9783]

un peut moins vite ça serai mieux

[@ИванИванов-ъ9я8ц]

Я сижу и думаю ну когда закончится эта хрень повтор друг за другом копирование от одного к другиму одно и тоже.

[@GaryFranz-m5i]

Most of it is a lot of wasted time and effort to create a lot of nothing...

[@IrmaAnaPaulaDaniel]

É verdade .

[@OmerSenyuz-fk4tq]

77​@@IrmaAnaPaulaDaniel

[@adrianmates3484]

😂3³you de la Iulia 3444433a3²²w2³

[@Jansjemos]

😂

[@GiampaoloMolin]

L) ventiecinquanta​@@IrmaAnaPaulaDaniel

[@catherinemushaw1956]

2 for 1

[@SergeDave]

En français,ce serait plus facile de comprendre Je connais que le français

[@999magandi]

тьфу... устал смотреть одно и тоже везде и всё вез толку...

[@BartvandenBos]

ben haast jarig 11maart 74

[@michel-l2g]

…

[@tonychia1065]

The end results of many of them are not clear because of the fast speed. I rather see less of the tips and hacks with clarity than that much in confusion.

[@yyyyyyyyyyyyyyyyy592]

много ненужного