World’s LOUDEST EcoBoost F150?! | Cold Start & Exhaust Clips + Full Setup

[@phonicbeast302]

One of the best ecoboost exhaust I've heard.

[@mcguiremadeit]

Thank you!! 😎 I appreciate that

[@justingill5256]

Heard way better on f150 nation this sounds like crap

[@ryancook1229]

@@mcguiremadeit what tail lights are you running?

[@512juancho]

Quit lying bro😂😂😂

[@tristenpicard4946]

Who asked 🤣

[@Entity_BlackRed777]

9:48 Sounds like a Cummins Diesel.

[@corypagano407]

As an eco boost owner I give you an A for effort buddy, but I learned to leave the exhaust to the 8 cylinders. It just never comes out right

[@mcguiremadeit]

It is definitely an acquired taste 😂 a lot of the guys I know who are big into performance mods on these trucks really like it though

[@sheba6789]

sadly i agree, i straight piped my 99 corolla which sounded cool. v8's sound better. props to the owner for doing what he loves to his truck.

[@mcguiremadeit]

@@sheba6789 that thing was probably LOUD 😂 that’s awesome lol. V8’s will always be the king, and thank you!

[@calebalsup5956]

Gosh that’s terrible….

[@mcguiremadeit]

@@calebalsup5956 eh I’ve heard worse believe it or not

[@joshgotsnext]

Thats one of the cleanest F150’s Ive seen yet. 😮‍💨

[@mcguiremadeit]

Thank you sir! 😎🙏🏻

[@goatedvault1070]

You haven’t looked very hard

[@mcguiremadeit]

@@goatedvault1070 let’s see yours

[@kingtachoss]

Indeed it is Nice tasty exterior mod’s nothing exaggerated just enough of erthing

[@mcguiremadeit]

@@kingtachoss I appreciate that!! 🤝

[@Smokkedandslammed]

I have the Ford Performance Borla Tremor specific exhaust for my 2014 Tremor and it sounds so damn good. I also have the turbo outlets and catted downpipes from SPD and it is the best ecoboost I've heard. Sounds like a factory 2022 Raptor. Great whistle, side exit, no drone and screams when I give her a rip.

[@davegordon6943]

How much did it cost you

[@Smokkedandslammed]

@@davegordon6943 $1000 ish at the time if I remember correctly

[@phonicbeast302]

@@Smokkedandslammed post vid

[@zReignYT]

You simply cant beat that turbo whistle

[@myyusauce]

It idles like a diesel almost lol. I wouldnt do this personally but its cool 🔥

[@mcguiremadeit]

Most people wouldn’t do this! I’m just crazy 😂 & thank you!

[@RyanFaubert-if3ij]

If you had ko3 mud terrains I’d think your crazy but since you got them queer suckin men rim lickin rims and wheels you might be gay

[@georgiafan6618]

I’m a power junkie. I’d send my 3.5 out to a reputable engine builder and port the heads - toss in bigger turbos and beef up the bottom end.. I like the exhaust and the paint correction looks amazing. Black is gonna do that for you. I’d get a black truck now that ceramic coating is out there. 👍

[@mcguiremadeit]

Thank you! & ceramic coating is the way to go with black vehicles 😎 and I love black haha. I think I may start building the engine due to this being the first vehicle I’ve paid off & decided to keep!! You can make crazy power with the EB engines if built right 💪🏻

[@402SHO]

@@mcguiremadeit look up RMB motorworks 😎

[@wizzylizzy69]

Port the heads? Bro just slap some turbos in it and send it, it isn’t 1986 anymore.

[@ItsDuhhNette]

I have a 2015 Ford F150 V8 , 4 x 4, with a 6 inch lift and I am fixing to Get mine hollowed out and go full straight pipe. My truck already has a nice sounding exhaust, but I just want it louder because I think it would fit the truck better because of the lift and I know I’m a girl, but I just want my truck louder.

[@Sherman62]

Wow. Didn't notice it was a 2.7 at first. It sounds HUGE.

[@mcguiremadeit]

Pretty crazy for such a little engine right! 😂

[@thedukeofconway4209]

Hard to get good sound out the EcoBoost but it’s one of the better sounding v6’s for sure

[@mcguiremadeit]

Thank you!! 😎🙏🏻

[@thedukeofconway4209]

@@mcguiremadeit the 2.7 and 3.5 paired with the 10 speed are one of the most slept on platforms ,sure they have a community but they deserve more

[@mcguiremadeit]

@@thedukeofconway4209 I agree 100%, there’s guys out there making 500+ to the rear wheels with upgraded turbos/intercooler & the right E85 tune. That alone is more than most can handle 😂 No 10 speed for me though, mines a 2015 so I’ve got the 6 speed, it’s been good to me. The early 10 speeds are nightmares I’ve heard

[@kristiangarnica6210]

Sounds like a damn lawnmower 🤣🤣nice truck though

[@mcguiremadeit]

😂😂 thank you!!

[@codylucier9991]

Beautiful truck bro I love the extended cabs over crew cabs . Look more like a truck that way sick truck bro

[@mcguiremadeit]

Thank you man I appreciate that! 😎🙏🏻

[@Adamthebuilder]

I think it sounds pretty good for a v6, nice job man! Once it warms up it sounds a lot better.

[@mcguiremadeit]

Thank you! I love how it sounds at idle once warm, definitely unique for an EcoBoost! Haha

[@Tumi_n_Company]

Sounds good to me! Need that catless downpipe!

[@mcguiremadeit]

Thank you! 😎 The SPD catless pipes are still floating around some of the 13th gen F150 pages/FB Marketplace if you want this exact setup, but MBRP makes a quality one as well. “Off road use only” 😏

[@cristianportillo3772]

I have an exhaust on my 3.5 eco not nearly as load but it dose sound good

[@huntercox1859]

Sounds like my granddaddy’s old combine when the muffler rusted out

[@mcguiremadeit]

Love it 😂😂😂

[@TK-ox1si]

Sounds like a mini diesel 👍👍

[@mariocontreras2922]

This is an amazing truck! I got the 2010 model and this is the exact way I want mine to look! Very nice truck! Keep making videos on it!

[@mcguiremadeit]

Thank you man I appreciate that! 🙏🏻 Funny you say that actually, just finished (finally) shooting a full overview video on this truck yesterday - working on editing it & will have it up this coming week! 😎

[@mariocontreras2922]

@@mcguiremadeit can’t wait to see it!

[@mcguiremadeit]

@@mariocontreras2922 thank you for the support!! 😎💪🏻

[@mach55r]

It sounds like a diesel, 6 and 8 cylinder all mixed together

[@mcguiremadeit]

I think this is my favorite comment 😂😂

[@dexterousx92]

*Thats is very loud. I hope you enjoy it. Thats a really nice truck . Enjoy!*

[@gabrielzicadopantano]

it sounds exactly like mines, i love it, my is a 2015 platinum

[@mcguiremadeit]

Nice!! What’s your exhaust setup?

[@shadygolden3245]

About to run 3” on my eco boost you just sealed the deal lol

[@mcguiremadeit]

That’s what I like to hear 😎💪🏻

[@pitbullbite5835]

The old SPD makes it... Nice truck...

[@mcguiremadeit]

Thank you!

[@TevynSmith]

I agree with exhausts on the ecoboost have a borla ATAK on mine

[@mark-ui8lu]

Sounds like a honda with Fart cans lol

[@mcguiremadeit]

😂😂

[@bossiebuilt1249]

bomb video 10/10

[@mcguiremadeit]

Only cause you in it 💘

[@martygp266]

She’s clapped lmao. A nice vibrant resonator or an aero turbine muffler would sound amazing

[@changbao8771]

Not the best sounding but the slickest looking 👌

[@mcguiremadeit]

I appreciate it! 😎🙏🏻

[@bmac9317]

First vid I’ve seen of this guy, and I already assumed this was either Florida or a Carolina of some sort

[@mcguiremadeit]

Florida all day 😂💯 it’s wild down here

[@98ramrado]

I’ve been rocking mine with custom catless down pipes and a through the bed side exit exhaust on mine for over a year 😂

[@mcguiremadeit]

That sounds sick 😂💪🏻 I wish I had the balls to cut the hole in the bed honestly cause I love the thru-body setups

[@98ramrado]

@@mcguiremadeit high rpms you gotta get passed but it sounds like a 6.0 power stroke nothing but straight turbo noise all the way to 2500rpm after that you let the Honda phase come in

[@mcguiremadeit]

@@98ramrado yup after that it’s full force Honda Civic LOL 😂😂

[@vdinoman29]

Dope looking truck

[@mattbanville9355]

That actually sounds like poo

[@9663mu]

The best exhaust on a Eco is the stock one. Jesus this is bad brother. Good luck it’s your truck. But that’s bad 😂

[@WaylonAxe]

Nice looking truck bro 😎

[@mcguiremadeit]

Thank you man! That one in your profile pic looks sick too!! 🔥

[@WaylonAxe]

@@mcguiremadeit Right on; thanks for noticing!!

[@mcguiremadeit]

@@WaylonAxe 😎💪🏻

[@b20em1]

My Ecoboost sounds like this mine a little quieter tho. Clean looking truck

[@mcguiremadeit]

Thank you! 💪🏻

[@dirtydannbih5869]

I like it bro!! Did you lift it or level it.? And what’s the tire and wheels on it? Thanks bro love the video!

[@brandonclark513]

What tail lights are them

[@benbrumbley181]

Sounds pretty okay man. I’m looking at a 17 2.7 how many miles does yours have ?

[@CineLikeFPV]

Bro what wheel and tire setup you running?

[@mathewnunez]

I love your truck by the way

[@mcguiremadeit]

Thank you I appreciate it! 😎💪🏻

[@jmendozas197]

The truck looks good cosmetically, but I’m kind of on the edge regarding the exhaust. The wheel/tire setup is on point, though 👍

[@mcguiremadeit]

The exhaust is definitely a bit much for most, some days even for me 😂 & thank you I appreciate that!! 🤝

[@whatiswumbobro4915]

what tail lights are those?

[@jimmcfadden1438]

Cool truck, sounds good 👍🇺🇸

[@mcguiremadeit]

Thank you! 😎🙏🏻

[@davidortiz173]

I like it bro, lets ride!

[@mcguiremadeit]

Thank you my man! 😎💪🏻

[@Mayoyaquiwarrior]

Greetings i dont like the sound of the ecoboost trucks but man this one i do like nice job amazing badass truck

[@mcguiremadeit]

Thank you I appreciate that! 😎🙏🏻

[@Mayoyaquiwarrior]

​@@mcguiremadeit you welcome

[@willmoore5550]

She looks good.

[@mcguiremadeit]

Thank you! 😎🙏🏻

[@Alex-yq3hg]

I also have a 2.7 ext cab if you ever get rid of that truck please lmk. I’ll buy your whole exhaust setup

[@jordanmercredi3740]

Spd exhaust sounds the best

[@mcguiremadeit]

I didn’t even know they were making exhausts now! I’ll have to look into that, may want to add a muffler soon after hearing some setups in the comments 🤔

[@jordanmercredi3740]

@@mcguiremadeit ya theres a black maybe 13-14 video that pops up when you search it in the snow sounds wicked

[@mcguiremadeit]

@@jordanmercredi3740 yup if it was the black crew cab limited that thing makes me want a muffler asap 😍 sounds like a diesel that thing is crazy

[@jordanmercredi3740]

@@mcguiremadeit thats the one

[@mcguiremadeit]

@@jordanmercredi3740 love it…muffler coming soon…maybe 👀

[@geraldbaker5592]

What’s all done for lift and wheels

[@claytonbrown1552]

They need a turbo’d 5.0 f150

[@T67GS300]

I’d add a resonator

[@mcguiremadeit]

May actually do a muffler later on down the road after hearing some of the suggested setups in the comments!

[@markottone]

What % is your tint

[@Filthymothertrucker]

Sounds great I’m thinking about res delete have afe exhaust on it right now how you get the spool so loud????

[@mcguiremadeit]

That would be thanks to the catless downpipes sir! Essentially there’s absolutely nothing muffling the sound of the engine or turbos, it’s just straight 4” pipe all the way back 😂

[@tylertomczak2273]

Catless down pipes ?

[@mcguiremadeit]

Yes sir!

[@the1realktmriderk560]

Sounds amazing

[@mcguiremadeit]

Thank you! 😎

[@neziosm7523]

you need a lift to fit your current wheel setup?

[@mcguiremadeit]

Short answer is yes, but the full run down is - if you’re 4x4 you can fit this setup with a 2.5” leveling kit. It will still rub a little, I’m 2wd (I don’t off-road) and was able to run the 4.5” lift spindles from Spindle Source + Bilstein 5100’s set to their lowest setting (.5” of lift), so I’m at 5” up front and I have a 1.5” block in the rear to level it out. Trimmed a tiny bit off the lower front plastic valence and I have full clearance on turns now, zero rubbing. Rubs a tiny bit at full lock in reverse, but not enough for me to want a different setup. That’s just the trade off for it looking cool IMO haha

[@Alex-yq3hg]

Is this a 2.7

[@dallasrodriguez8731]

What size of lift are you running

[@adamsdailydriveway]

I can tell it’s crazy loud in person!! Holy moly, truck looks 🔥

[@mcguiremadeit]

Thank you man I appreciate it! 🙏🏻 it’s crazy in-person, cameras rarely do anything justice 😂 feel like a few of these haters in the comments may change their minds if they heard it in person LOL

[@ah4800]

Ricer civic in truck form 100%

[@mcguiremadeit]

😂😂😂

[@ah4800]

@McGuireMadeIt you gonna get some type r stickers bro?

[@mcguiremadeit]

@@ah4800 only if you buy me some! 😋

[@brandonpeltier1813]

What are the wheels and tires?

[@srtdonmega]

I need to know more about the tail lights 👍

[@mcguiremadeit]

The tail lights have been a big hit! 😂 They are OEM 18+ halogens painted with a design I thought would look cool, local shop down here in South FL who does my lighting/most of my PTM work did them

[@abnerc.4976]

Can I ask you why you went 12 wide and not 14?? And why a spindle kit vs a full blow lift?? Just wondering lol.

[@mcguiremadeit]

Personal preference for both (I’ll explain) but the answers actually go hand in hand! 😂 I like 14 wides on lifted trucks, but think they’re a bit much for leveled trucks. I also like to be able to see the face of the wheel while taking angled pictures from either the front or rear of the truck (which you really can’t with 14 wides due to the lip being so big). What all ties it together is the fact that I couldn’t own a “lifted” (6+ inches) truck due to my driving style 😂 I drive this truck like it’s a sports car and the fact that it keeps up rather well for a truck is what made me keep it. Before this truck I was buying a new vehicle every year or two LOL

[@mcguiremadeit]

That and I honestly just love the leveled look on these F150’s versus lifted

[@Krpr2002]

What is your tail light?

[@kingtachoss]

Ecoboost doesn’t sound good at all it’s better to leave it stock IMO

[@mcguiremadeit]

Stock works for some people but not for me 😂 thanks for the feedback though 🫶🏻

[@kingtachoss]

@@mcguiremadeit don’t get me wrong I love my Ecoboost buy only my Coyote gets exhaust or unless a company makes a good sounding for the Ecoboost I would not mess with the factory exhaust system, E-15 tune and CAI it’s good enough for me

[@mcguiremadeit]

Unfortunately I’ve yet to truly hear a system for the EcoBoost that has “wowed” me 😂 so I feel you there! I just can’t leave anything alone LOL, original plan with this truck was leveled with some all terrains on the stock wheels & tint…oh how far we’ve strayed 🤪

[@kingtachoss]

@@mcguiremadeit u did good on that rig it looks amazing

[@mcguiremadeit]

@@kingtachoss thank you!! 😊

[@project_baby7064]

I got the same exhaust on my chevy Silverado!

[@mcguiremadeit]

Shoot an exhaust clip video I’d love to hear it!! 🔥

[@JM-mp4dm]

Fart box with two doors on rubber bands 💀

[@21philgood]

Thought I was hearing a boat, nice truck though

[@mcguiremadeit]

I do too most days 😂 & thank you!

[@tommygunz804]

Need that set up where can I purchase it

[@Landon1860]

Not a huge fan of the eco boost but super clean truck🤝

[@mcguiremadeit]

Thank you! 😎🤝

[@Frog_man007]

How dark is your tint?

[@mcguiremadeit]

5% over factory on the rears, double layered 15% on the front two to match & single layer of 15% on the windshield. It’ll put you to sleep at night it’s dark 😂 I’d recommend 5% all around and 30% windshield (having been through many tint setups over the years) and you can see what that looks like on these trucks in @Bossiebuilt newest video!

[@geraldbaker5592]

And tail lights

[@skrsys]

I got the borla s type on mine, it sounds pretty good. I have a video of it on my profile if you want to hear.

[@maxelizarraras]

How did you do those taillights ?

[@mcguiremadeit]

Had them custom painted by my paint guy with a design I thought would look cool! Going to have a full overview video up as soon as I kick this cold & get my voice back, the tail lights are one of the most asked about parts of this truck 😂💪🏻

[@omarjuarez8857]

I’ve been running this set up way before this 😂 be honest it sounds like shit but like you said it was expensive af so it stayed on the truck.

[@mcguiremadeit]

A very expensive lesson learned to put it lightly 😂 I do like the sound at the lower RPM’s though, sounds pretty wild for what it is

[@blaynedavis5117]

Where did you get the taillights? Got a link?

[@mcguiremadeit]

Unfortunately no link, I had those custom painted by the shop I use for all my PTM/lighting stuff ☹️ they’re OEM 18+ halogen housings painted with a design I thought would look kinda cool. They killed it though these things came out awesome & still look like the day I picked them up 💪🏻 Retro Customz in Royal Palm (FL)

[@zackzab6712]

that thing sounds like a lawnmower im sorry lol, if it aint a v8 dont mess with it

[@reitzy69]

😆 😄 😄 😆 that is all....sissy city boy truck

[@MiguelAngel-oh1ub]

Nc Native?

[@mcguiremadeit]

FL 🤘🏻

[@533thofer]

I have a 3.5 ecoboost with 3.5in catless downpipe to an axle dumped 4in straight pipe. It’s interesting how much deeper the 3.5 is vs 2.7.

[@calebtornquist]

Do you have any videos of it? Also do you have the same downpipes??

[@533thofer]

@@calebtornquist just pictures of the setup. No videos. My downpipe is from MAK.

[@calebtornquist]

@@533thofer those are careless downpipes correct, could you take a video I’m crazy to hear what that sounds like with the 3.5 lol?

[@calebtornquist]

Catless

[@533thofer]

Yes Catless. I’ll have to do a video and cold start. I took pictures of everything after I did the install three and a half years ago but never did a video.

[@adrianescuderomontes9151]

What are the rims called they look good

[@mcguiremadeit]

They are American Force ‘Sprint’ concaves, size is 24x12 😎

[@All_Throttle_3.5]

What did you do to keep the CEL off so that your remote start works?

[@mcguiremadeit]

O2 defoulers in the downpipes, I’m not sure if SPD sells them anymore for emissions reasons (nor do they sell catless DP’s any longer) but you should be able to find a used set through some of the online forums/groups!

[@MrBentruby]

Get some fender liners!

[@mcguiremadeit]

I have them front & rear! 😂 unless you’re talking about what we call fender flares

[@MrBentruby]

@@mcguiremadeit I see that now, disregard.

[@mcguiremadeit]

@@MrBentruby haha no worries!! They are harder to spot on the black trucks!

[@MrBentruby]

@@mcguiremadeit The visible crossmember beneath the liner is what prompted my comment.. who sells liners that don't cover that? At least you don't have to worry about salt down there.. Any case, the truck sounds good. I personally have a 3" stainless system on mine and it doesn't have all that high RPM rasp.

[@mcguiremadeit]

@@MrBentruby ah I gotcha! I bought the OEM liners from Ford and they don’t cover that piece completely like some of the aftermarket ones do, the fit on them is awesome though so I’m pretty happy! & correct no salt down here or even snow LOL! Our “winter” is a nice 75-80 degrees currently and I’m able to drive my nice vehicles around year-round. What muffler are you running on your setup? After hearing a couple suggestions in the comments I may possibly want to add a muffler, some of them clean up the sound nicely

[@treyivey5431]

Sir with your credit score right now we can’t get you in the 2500 dodge 😊Cummins……

[@jorgedisalvo5277]

The truck looks good, but the exhaust is just noise. There's nothing there as expected from an ecoboost.

[@mcguiremadeit]

That unique EcoBoost noise 😂

[@cesargarcia386]

Where u got ur taillights, there so freaking cool..

[@mcguiremadeit]

Thank you man I appreciate it! They’re OEM 2018+ housings painted with a design I thought would look cool, Retro Customz in South Florida did them for me along with my headlights, emblems and a few other odds and ends

[@MHRobbins23]

Question. Do you like the sound of a v6? I know im strictly v8 when it comes to exhaust on trucks but would like to know others opinions. Truck setup is super clean though.

[@mcguiremadeit]

Thank you man I appreciate that! The V6 grows on you after awhile, at first it was odd the sound (especially in the higher RPM range) just didn’t fit the look of the truck, mainly because it’s a truck, but at idle and lower RPM’s I will say it sounds pretty sick for a V6 😂 That + how capable these trucks are with the factory turbocharged V6’s warms you up to it over time

[@JimmyCasket02]

@@mcguiremadeitit kinda sounds like a cummins at low rpm’s to me

[@mcguiremadeit]

@@JimmyCasket02 right!! I try to take off slow/keep the RPM’s low whenever I can and it sounds pretty wild for a little 2.7L Eco 😂

[@logankauffman8393]

What tail lights are those???

[@mcguiremadeit]

OEM 18+ halogens painted with a design I thought would look cool! A local shop here in South Florida who does most of my lighting/PTM work did them for me. Translucent paint so the light still comes through

[@shanegregory1114]

Are those super duty mirrors or are they just f150 town mirrors

[@mcguiremadeit]

They’re interchangeable, the first run of the 13th gen F150’s came with a different style tow mirror (only difference is where the arms meet the mirror itself) and I never liked the look of those. In 2018 (I believe) is when they started using the same mirror as the Super Duty’s, which is what I have. Caps are paint matched to my color code & they are OEM mirrors!

[@daltoncook9003]

On a side note how did u tint your tail lights? Interested in doing mine

[@mcguiremadeit]

I had these professionally painted (translucent paint) with a design I thought would look cool, they’re OEM ‘18+ halogen housings 😎🤘🏻

[@abnerc.4976]

You definitely got a clean truck. Wondering what suspension and tire size if possible. Looking to do this setup on my 2010.

[@mcguiremadeit]

Thank you I appreciate that! It’s on 4.5” lift spindles & Bilstein 5100’s up front (set to their lowest setting .5”) and a 1.5” block in the rear. Wheels are 24x12 concaves with 305/35r24 Nitto 420v’s on them. Metric tire size, but comes out to just under a 33” tire. Did some minor trimming on the lower plastic valence up front and that was it!

[@abnerc.4976]

Gotcha. That’s for replying. So you ain’t have to Cali mod it at all??? That’s what I really wanna avoid with the truck.

[@mcguiremadeit]

@@abnerc.4976 absolutely man, thank you for the compliment! No cali mod, I’m very very particular about my vehicles and won’t do anything I can’t readily undo (like trim metal off of fenders or bumper LOL). Is your 2010 4x4 or 2wd? The 4x4 trucks sit 2” higher from factory, so you can get roughly around the same height I’m at with a 2.5” leveling kit if you’re 4x4. Really all comes down to how much rubbing you can live with because most setups will rub a little, but that’s the trade off for the look in my opinion. I can get full turning radius in Drive, but in Reverse (for whatever reason) the tires rub the bottom corner of the bumper ever so slightly at full turn. Not bad, but just enough to let you know you’re hitting the bumper. Personally it doesn’t bother me enough to trim it (especially since I’d be trimming metal) so I just got used to it over time & no longer turn sharp in reverse.

[@abnerc.4976]

Negative. Rwd. Which is fine with me because I don’t plan on towing. Just hauling a randomness. 2010 fx2 sport. I feel the same way. I would really like to avoid the Cali mod lol. I never rolled my fenders in older cars because I didn’t like riding around without a fender liner.

[@mcguiremadeit]

@@abnerc.4976 oh that’s perfect they make lift spindles for your truck then! You can get exactly what I got 😎 & haha luckily the Fords have the bigger wheel wells which helps. All my buddies with Silverados rub like crazy on most setups LOL

[@843cuh9]

Can’t you just get a cat delete? And are you tuned ?

[@mcguiremadeit]

Not tuned yet, motor is all stock as of right now. Cat delete would give you more engine noise but not more turbo noise, the downpipes are responsible for that. You’ll still have a decent amount of turbo noise (compared to stock) with catted downpipes, but I like it loud so I went with the catless pipes 😂

[@843cuh9]

@@mcguiremadeit hell yeah nice truck bro I literally have the same one on 26s your is much cleaner 💯

[@mcguiremadeit]

@@843cuh9 thank you man I appreciate that! 🙏🏻 & that sounds sick!! Do you have any videos of it on here? I’d love to see it

[@Lusty.2is]

Tbh I get mad 6.0 powerstroke vibes

[@mcguiremadeit]

One of my favorite sounding Powerstrokes! Thank you 💪🏻

[@camkallio6055]

Where are your tail lights from?

[@mcguiremadeit]

They’re OEM ‘18+ housings painted with a design I thought would look cool (translucent paint) by Retro Customz in South Florida. They do all my lighting/PTM work

[@redneck_engineer858]

Sounds alright but it does not sound like a truck

[@mcguiremadeit]

Definitely sounds different for a truck yes 😂

[@Daimxn]

Honestly sounds similar to a diesel, especially with the turbos

[@mcguiremadeit]

Like a little baby Cummins at idle! LOL

[@firstnamebrent]

Swag

[@mcguiremadeit]

my boi 🤝

[@Diogenes77]

Why do grown men put huge wheels and tiny tires on an F-150? They dishonor based Henry Ford

[@calebtornquist]

Do you know of anyone that is selling one?!?

[@mcguiremadeit]

If you’re talking about the catless downpipes - check out Facebook Marketplace & the 13th Gen F150’s pages as well (I believe there’s now one dedicated solely to selling parts) as those will be your best bet on getting your hands on a set of catless SPD pipes. Otherwise MBRP makes a set you can buy online brand new too!