How to Wire 32 Channel DMX Decoder, Power Supply, RGBW LED Tape

In this episode, I walk you through how to wire RGBW LED Strips to your DMX decoder including how to prep the wires, connecting the wires to your DMX Decoder, and more.
Thank you for watching. Please SUBSCRIBE and ring the bell to be updated when new content is released.
Hourglass Stage Design Idea | RGBW LED Tape & Yarn • Hourglass Stage Design...
PRODUCTS IN THIS VIDEO
RGBW LED Strips: amzn.to/35Oe6xz
-second option: amzn.to/36pBe4g
DMX512 Decoder: amzn.to/3c2CGdU
12v 30a DC Universal regulated switching power supply: amzn.to/2XpyJLc
Wire Cutter: amzn.to/3d3r7V6
Wire Stripper: amzn.to/3gmtyEe
Flat Head Screwdriver: amzn.to/3nNMIWu
Phillips Screwdriver: amzn.to/2zr4snf
1/8 Inch Flat Head Screwdriver: amzn.to/3gjp7u6
NEW WLH MERCH*
CHECK OUT OUR MERCH STORE: teespring.com/...
Follow us:
Facebook: / worshipleade. .
Instagram: / worshipleaderhangout
Web: www.worshiplea...
Twitter: / wlhangout
JOIN OUR FACEBOOK GROUP: / 159676088077343
All product links help support Worship Leader Hangout financially.
MY CAMERA GEAR
EOS R: amzn.to/2t35x1n
Lens: 24-105mm RF: amzn.to/2SmdsR1
80d: amzn.to/2o7Hds9
Lens: 35mm: amzn.to/2KgzWM8
Lens 17-55mm : amzn.to/2DrQVLs
ND FILTER: amzn.to/2FxdKMF
Lense Hopper MIC: amzn.to/2DqVaVJ
Rode Link Lapel MIC: amzn.to/2KzXhet
TRIPOD: amzn.to/2Drd8Yn
MINI TRIPOD: amzn.to/2MoXhxS
Big Light Aputure 120dii: amzn.to/35eTFbr
Light Dome ii Aputure: amzn.to/2Yfw4G7
-Lanturen Aputure: amzn.to/3bFeZcu
-Small Light Aputure MC: amzn.to/2xahQeo
DRONE: amzn.to/2pMm4oJ

[@kroekerta]

Clean recording, audio, camera stills and close... Everyone one the planet should follow your technique before making a video. "Extremely Perfect" wow!

[@WorshipLeaderHangout]

Thanks so much! Means a lot

[@kroekerta]

@@WorshipLeaderHangout It was really perfect. Thanks for the work and his work as well.

[@MarcheRutolski]

Tech guy who just wanted tech info: Thanks for the video; super nice and informative; and the message at the end came off genuine, not preachy or distracting from the topic.

[@mariahfetch]

As a TD at a busy theater this was wildly helpful. Thank you very much

[@thill47]

Thank you for the video. I have ordered the Strip, Decoder and power supply. I can't wait to do the project.

[@WorshipLeaderHangout]

It’s a lot of fun to see it all come together. God bless

[@SheSparkles83]

Thanks for posting! About to make a Christmas stage design! This was soo helpful!

[@DJvvAZZ]

I just discovered this video. Thank you. You literally gave me hope to continue to discover my passion of becoming a lighting DJ. 😃 I have a number of DMX compatible lights , and a standard 192 controller, ( but I need a 32 channel over the 16, due to my expensive chauvet gigbar2, to master full control). But I REALLY wanted to have an 8 strip display to play around with. And that is how I discovered your channel. I have done a number of DJ gigs , and I discovered that good lighting with music makes the crowd happy.... And we all need more of that in this world! Gosh, I ramble don't I? Just thank you and God Bless.

[@louisdavian5434]

you all probably dont care at all but does anyone know a tool to get back into an instagram account? I somehow forgot my login password. I would love any assistance you can give me!

[@hugoryland5888]

@Louis Davian instablaster :)

[@louisdavian5434]

@Hugo Ryland i really appreciate your reply. I found the site on google and im waiting for the hacking stuff now. Looks like it's gonna take quite some time so I will get back to you later with my results.

[@louisdavian5434]

@Hugo Ryland It did the trick and I now got access to my account again. Im so happy:D Thanks so much, you saved my account !

[@hugoryland5888]

@Louis Davian you are welcome :D

[@DamianoPizzoli]

grazie per il vostro lavoro siete di grande ispirazione

[@bgolden0707]

Where can one find a spool of that wire you are using here at 3:37?

[@DebraStrutton]

How you connect the DMX box to the main control box when you have more than 1 strip going into the DMX box. Thank you so much for all your ideas. I have been using your videos and stage designe for the past 2 years at my church.

[@nelrodjr]

Does it have to be copper wire from power supply to input

[@lilnavio]

Can I wire two decoders to one power supply?

[@DanielSalloumOG]

We used this in our church and looks great we got RGBW strips but we are wondering if it is possible to use addressable led strip to have multiple colors and same line. Please let me know

[@JustinKrux]

great video! good explanations...i am absolutely laughing at you mentioning 96 channels is a lot though, lol....thats like 2-3 moving heads, not even with some of them....

[@newbeginningschurchproduct1491]

Thanks for posting this video. I have followed all the instructions step by step and when I connect to DMX the only color I can get is red. Ever had this experience before?

[@salatoughey9770]

i’m experiencing the same issue

[@laughitoff3099]

Thank you brother

[@ewoudvaneetvelde6167]

Hello, thank you for this vid. How would it be different if you would use a setup with ADDRESSABLE LED's?

[@manassehbunny]

Your videos are helpful to us. Can we connect vintage bulbs to dmx decoder

[@HMT3design]

Is it one power box per decoder, or can I wire more decoders into the same power box?

[@MusicMindedfnd]

Cool video! Very helpful

[@NathanWolfxx]

Awesome videos brother, thank you so much for all the tips!

[@blakeford1445]

Great video. Super helpful. I was able to use these inside of my drums cage to light up our drummer and drum set. I am having an issue doing this. The lights work but every few seconds they flicker. Any suggestions?

[@WorshipLeaderHangout]

Could be a power issue. Be sure you are getting consistent power output from your power supply. I had the same issue but I was using a smaller power supply. Haven’t had any flickering issues after using these.

[@colbygriner1204]

Hey, did you ever find a solution? I’m having the same problem still using the larger power supply.

[@ianketterer3448]

@@colbygriner1204 I am also having the same issue. It is very strange behavior though, if I run more than one strip at full brightness, then I can fade on of them up and down with no flickering. If I put 6 strips at full brightness then I can fade up to three of them at a time with no flickering. If I just try to fade one strip (when no other strips are on) then the lights flicker.

[@packardjennings361]

Great video! I got the lights and decoder working for a single strip. Could you advise on the program settings in the decoder to add strips to other outs (out 2, out3, out 4 etc) and have individual control of each independent strip / out? I'm working with SoundSwitch, but the patching of fixtures is the same.

[@packardjennings361]

I'm asking the same question as Joshua below, where he asks: f you ran 8 separate LED's out of that one DMX decoder, would you have control over each fixture separately?

[@WellesleyTheatreProject]

Hello! Great video! You didn't link the black cable that you used to connect the power supply to the decoder. Can you tell me what that cable is or link it?

[@WorshipLeaderHangout]

It’s a standard 3 prong computer power cable. I just cut the end (computer side) then wire to the power supply.

[@jarredcozart3347]

Super helpful! Are the channels pre set in the decoder or did your software determine the function of the channel? Basically what I'm asking is, are channels 1-4 always going to be red, green, blue, white or did your software do that? I'd like to know if I'd be able to accomplish the same result with a standard hardware controller or my USB to dmx interface that is controller by my DAW.

[@joshuasuperneau6469]

If you ran 8 separate LED's out of that one DMX decoder, would you have control over each fixture separately?

[@lukedumouchel3358]

Yes

[@jimi2tyms]

If I want to have a chase/waterfall effect will it depend on the dmx controller having that particular addressable function as an option or will it depend on the chip built into the LED or pixel strip? Or do both the strip and the decoder need to have that function for me to make this happen? Thank you! (I’ll be running all of my lights through a computer with a lighting interface)

[@deejayduy]

im wondering the same thing but yet theres no answered..

[@cm88guy]

Thanks for your video! I do have a question of how to control Each LED with my console? what dmx decoder should I get?

[@oscarmolina2024]

Hey Chad, Do you know if the decoder you use works with Madmapper? Thanks again and love the videos

[@GLEBALISATION]

yes, it works

[@studionulzevenzeven5188]

can you make one section of srtip blue and another section yellow? Or is it just 1 collour for the whole strip ?

[@CristianRotelliMusic]

Greetings from Italy!! Thank you for this video.. I just finished to mount the system but I’m having a problem with the stripes.. when I use some colour, they make noise.. What can I do? It’s very bad!! Thank you guys

[@alexjos7625]

I will try this

[@LAGASTEST]

you're connecting it to the pc with a dmx to usb controller? or does it need a dmx master in order to connect it to the pc?

[@thill47]

Received all my goods and got it working with my controller but only on OUT 1. How do you assign OUT 2 and so on on the Decoder. The instruction booklet that comes with it is about as useful as an ashtray on a motorbike.

[@ChrisRodriguez9694]

if I plug two LED strip in one output will they work?

[@pianos-mutant]

Hi, Thanks for your video !!! Just one question : Can I replace the strips by single leds (5 or 10W) ? 🙏

[@juliocesardelgadoposada552]

What type of 5-prong cable are you using? can i use one of 4? And is this a special signal cable or something like that?

[@alwaysanovice]

Fyi....the circle has nothing to do with the grounding designation. It's the dissipating lines with the vertical slash that represent the dissipation of current back to earth ground. Thanks for a great tutorial .

[@thegrowthvaultchannel]

Does this work with dmx 512?

[@alvaropereztorres6177]

Hi, good video! Do you know how to conect 3 ambilight systems to the computer? each one have a USB port.

[@ethannickerson1901]

Thanks for the video! Can you confirm something for me? Is it one power supply per decoder? And with those two devices you can run eight separate LED strips? I saw a parts list from a church with two decoders and multiple power supplies and I can't figure out why. Thanks!

[@myfavoritesingernow]

Great l like it

[@jstern75]

In your other video of LED tape with the smaller DmX decoder, you did not use a power box and plugged the decoder into wall using power. When is it necessary to have this power supply?

[@turbulanceism]

Can you add chases with these decoders

[@WorshipLeaderHangout]

Yes but only with a DMX lighting software and or controller

[@amirkajtezovic8310]

Is there a automatic led music sync controler/decoder like the ViVi 2 (visual vibes) which has unfortunately gone out of business?

[@markharrell]

Can the 16 ft led strip be cut in smaller strips and then connected again?

[@carlgibson182]

Are all the channels individually dmx addressed

[@ThatKiDwiththeDrums]

I'm only using one side (rgbw strips), so I still need to wire to both inputs from my power supply or will one input work? Thanks a lot!

[@jessecoonen7881]

What gauge wire did you use for connecting the strips to the decoder?

[@goranmediamax543]

How did you conect decoder with PC? Do I need dmx console or I can control with pc? Thanks

[@topandrun126]

I just bought nine 16ft govee led strip. I'm new to the led community these strips added up to 216 Watts is it possible to connect all 9 strip together with one 350 Watts power supply or do I need more than one power supply? I have a 144ft of ceiling to run these led lights Thanks.

[@voaji]

can i use this 32channel decorder for say 4 led strips and 4 fixtures hung on my truss? or do I need to get a dmx splitter?

[@livin4thenext]

Can you get multiple colors from the different outputs on that one controller?

[@ing.eduardomunizrodriguez3554]

Please help brothers, can I set different colors to each output of the decoder? Thanks for the help

[@JamespMusic]

hi. I am trying to figure out how to connect our house lights to dmx... have you done this? There is 2 0-10v wire going to a dimmer switch on the wall.. I want to connect that to the box and them to dmx via lightly. any ideas? house lights are white only..no RGB. and yes only 2 dimmer wires coming off them. thanks!

[@Matt-nt4ix]

Is there a way to connect the Dmx decoder wirelessly to your control program?

[@Vgjbfgaas]

Why do you connect so many power source (4) for the decoder while you test only 1 light strip? I have a problem with my decoder that it doesn't turn the light on.

[@christianprison]

I have the same question. I connected only 1 pair of V+ and V- but that doesn't even drive the display. The only thing I can think of is that due to the amount of current that the Decoder needs, they want to make sure that the overall diameter of the power cables is sufficient. But who knows for sure? And in the manual, they actually show 4 different power supplys with 4 wall plugs. confusing...

[@eleazarfulgencio526]

Is that all you can do with your controller just to changed color? Controller look so expensive. The wled can be self addressed.

[@dylanbyars1427]

Would it be possible to use this on an 8-16 channel dimmer console? How would I do that if possible?

[@xpsmax1]

can that controller control each of the 8 LED strips individually or only all as one?

[@imaxtranhvac-rdienlanhusa9822]

It's all about the amps. Read first.

[@roneysmathews9993]

The RGBW LED strips that you recommend in the video are 16.4 ft....we need something that is 18.5 ft. Do you have recommendations on how we can achieve this or is it possible to cut LED strips so that I can use the 16.4 ft from this strip and add another piece of 2.1 ft to make one continuous strip with the same strip? Thanks. Your videos have really helped us in our churches transformation journey

[@roneysmathews9993]

Figured out how to connect custom length RGBW LED strips together. However in my use case, I need to use 2 separate LED strips around our stage design which must be DMX controllable. These separate LED strips must be producing different colors from the computer via DMX. Does that mean that I would need 2 separate power supplies and 2 separate DMX decoders? i.e One LED strip shows Green and the other strip shows White. Also the DMX decoder that you recommended is not available in Canada. Are there any alternatives to that DMX converter that I can use with the same specs that you mentioned? What spec DMX converter specs are we looking at? Do we need 32 channels, 24V, 96 A? Thank you so much. Keep up the good work and God Bless!

[@danparker1925]

If I was to connect two 16.6 RGBW tapes to make one long tape to run the length of my stage, would I need a 24 v power supply or will a 12v power supply that you have listed work?

[@klmkt4339]

What is the keyboard kind of hardware??.

[@jorbace]

Hi can you make a video on how to connect DMX2112 TO a spectrum 097? Thank you i very complicated 🙂

[@sherwinpoklay3013]

question, if the strips flickers at the same time and sudenly changes color if its supposed to be on just ine color, does that mean decoder going bad?

[@CityGateTV]

Have you have come across the 32 channel decoder only working on one side? I try to connect power to the second side and it just powers off. Do you have any ideas why? I have the 32 Channel 96A RGBW DMX 512 LED Decoder Controller DMX Dimmer DC5-24V RGBW RGB LED Light 8 Bit/16 Bit and the MENZO 12v 30a Dc Universal Regulated Switching Power Supply.

[@DoetErNietToe]

what dmx controller / software do you have in this vid?

[@WorshipLeaderHangout]

It was the MP-C software and M2GO board. We are using Lightkey now and love it so much more!

[@alp692007]

Could you please, make something with a madrix? like pixel mapping, that would awesome...

[@nickelle3268]

Alexander LP that would be awesome, but they’re using LED tape, instead of pixel tape. So, there’s not much need for pixel mapping since there’s no individual pixel control.

[@modellking]

you need a different kind of encoder/decoder for this... we are working on a custom chip to decode DMX to a 6m pixel rgbw strip. there are solutions in the industry but they run very fast in their limitations. Pixel mapping is not really what DMX is for :/ Most professional solutions use decoders that take video input.

[@SoCalEventProductions]

What encoder would I need

[@pedrobanda9130]

Could you tell me which 5 color wire you are using where I get it?

[@AndrewBernardez]

I did some research and found that it is sprinkler wire 18/5 and you can find it pretty inexpensively at Lowe's or Home Depot.

[@juliocesardelgadoposada552]

​@@AndrewBernardez esto te funcionó correcta mente ?

[@MProductionsHU]

Is it possible to use WS2812b LED strip with DMX and still program it pixel by pixel?

[@SoulJuce]

Not on this decoder you will need a different decoder as addressable leds use video mapping rather than dmx channels

[@DanielSalloumOG]

@@SoulJucewhich one tho I can’t find a decoder for addressable led

[@SoulJuce]

@@DanielSalloumOG Look into WLED with DMX

[@DanielSalloumOG]

@@SoulJucewhat do you mean? Is that a led strip or a decoder?

[@SoulJuce]

@@DanielSalloumOG WLED is an open source led software which has alot of functionality for different types of leds strips which includes DMX integration

[@thomasp001]

Wouldn't say that the M2PC is discontinued. Certainly they don't manufacture them anymore but you can by what's nearly the exact same device as the NX Wing, which only has a few very minor differences. The actual M2PC works absolutely fine with Obsidian Onyx and is a proper onyx license unlocking all 128 universes.

[@WorshipLeaderHangout]

Very true. Thanks Thomas

[@willtraynor]

Is this something we could use for a back wall wash? Our church has a lower ceiling so from the stage floor to the top of where coverage is needed would be like 9ft.

[@WorshipLeaderHangout]

It may be but you might need to use multiple strips. They are cheap enough that you could buy one and test it before you put a lot of money into it.

[@willtraynor]

@@WorshipLeaderHangout one more question: will using a 24v power supply give me more brightness on a single strip, or will it just allow me to chain multiple together without loosing brightness (or both maybe)?

[@danparker1925]

@@willtraynor did you figure this out. I am wanting to put two 16.4' tapes together to run the length of my stage. I don't know if the 12v power supply will handle or do I need 24v.

[@danparker1925]

I ended up running two 12 v tapes together with a connector. You could notice the tape close to the power supply was brighter than the end at the second strip. I would recommend 24v tape , make sure you get a 24v power supply

[@carlosfelipeperezleon3267]

Good afternoon. I was trying this DMX512 32ch Decoder with the LTECH DX8 Wall Mounted RGBW Controller and I couldn't control the lights. Any help with this?

[@Izzybuckets]

How many power boxes do I need if I’m gonna use around 200 ft of led strip ?

[@irg008]

yeah how do you calculate which powersupply you need?

[@alexisventou5893]

hello i need your help. i have the same DMX512 DECODER 32 channel with 8outs of RGBW+V where am connecting the strips. on this Decoder can i connect a led strip that is WS2812B DC5V LED Strip RGB 1M 144 Pixels Smart Addressable Black PCB WS2812 IC Full Color ? will it work? thank you

[@ianketterer3448]

I just purchased this decoder with a 1000w 100amp power supply and i am getting some real weird fading flickering whenever I have only one channel on at a time

[@michaelstretch2252]

Suggest removing the clip then install the wire. Then insert the clip.

[@PantherJagger]

Have you tried with an Individually addressable Led Strip?

[@EmilyRoseLewis]

This seems complicated. It's wierd they don't have a cord that will plug them into the wall.

[@justolise]

What’s the name of your lighting software

[@WorshipLeaderHangout]

We use Lightkey now. It’s amazing

[@rubenrobles7275]

Does it matter which rgb led strip you use, or are matirx or lepro led ok? Which led's did you use for this video?

[@christopherpalazini7642]

Could you pass along the source or link to the spool of 5-wire cable you showed? I didn't see the link for that. Thanks

[@WorshipLeaderHangout]

No problem, I’ll reply soon

[@WorshipLeaderHangout]

So... it looks like they are out of stock because I can’t find it anywhere. The links I provided previously had both white and black options.

[@theRyanBerry]

@@WorshipLeaderHangout where are said links?

[@AndrewBernardez]

So I found that this is sprinkler wire 18/5 that you can find at most home improvement stores.

[@MarcelJoseph]

@@AndrewBernardez did that work? The one I found didn’t have blue wire.

[@trevorbelmont4633]

Do you connect the Decoder directly to PC?

[@WorshipLeaderHangout]

You need an interface that is compatible with your software

[@WorshipLeaderHangout]

What software are you using?

[@trevorbelmont4633]

@@WorshipLeaderHangout I want to learn QLC+ for this

[@kroekerta]

My one question is that I assume you end up with rgbw and no strobe or other capabilities, correct?

[@WorshipLeaderHangout]

For other effects we use what LightKey offers for these basic RGBW strips but we can strobe any color but only because of LightKey. Hope that makes sense.

[@djparadadmrteam8642]

Hello, please advise I have this decoder but not working with the DMX mixer how to make this work

[@Rawkabilly57]

So I noticed that you are using a 12v power supply into a 24v DMX decoder, into 12v led strips? I'm using the same setup and having control issues (lights flickering and as I increase the intensity of the strip it gets worse) I'm wondering if I'm just going to long on my strip (16f) or if the voltage discrepancy is the issue.

[@quietconfidence8070]

I also am having this same issue. Any fix that worked for you by chance?

[@texasmike7994]

Will this decoder run 2811 pixels?

[@meeke001]

Thank you for the great tips and information! I tend to find myself looking at your videos when I'm designing shows. Great work! I do have one question though. Where did you find that jacketed wire used to connect the power source and the decoder? What is the name of that wire? I would love to get some!

[@WorshipLeaderHangout]

It’s jacketed sprinkler wire from lowes. You can get them by the roll.

[@WorshipLeaderHangout]

18/5 Solid Jacketed Sprinkler Wire (By-the-Foot) www.lowes.com/pd/Southwire-18-5-Jacketed-Sprinkler-Wire-By-the-Foot/50148248

[@AkeemVicente]

Question? Do you need that software and board to run and turn on the lights ?

[@WorshipLeaderHangout]

Any DMX software should work. This is just what we use.

[@zachtdietz]

Alright bro. I’ve done everything this video says…lights work, but when I try and change color, the colors won’t change to correct color. I chose a generic RGBW 8b LED fixture. I’ve tested all of the colors on the DMX Decoder and it all works great. What am I doing wrong???

[@abnercastaneda1876]

If I don't have a console like the one in the video, how can I do it to configure the decoder with a DMX?

[@WorshipLeaderHangout]

You can use them with any DMX software with or without a console.

[@abnercastaneda1876]

@@WorshipLeaderHangout Thank you very much for answering one of the many questions I have about that decoder, another of the doubts I have is what codes I have to put in order to manage the channels with the DMX

[@mikeavento8066]

Hi Chad. We have a lot of RGB led strips. Will this work without using white or do you recommend purchasing RGBW. Low budget 🤷‍♂️

[@nickjones6833]

it works with rgb just fine, it supports multiple led tape types (rgb, rgbw) also like solid white with a dimmer feature

[@SuperMario-ci5cf]

Hello brother , I'm using the exact supplies but the led light are flickering, how did you manage to avoid flickering. thanks.

[@WorshipLeaderHangout]

The flickering is either a insufficient power issue or an unstable DMX connection. I had the issue a long time ago with one and just redid all of my connections and it worked. Check you power supply and the cable you used with it as well. Let me know if it ends up being something I haven’t mentioned.

[@SuperMario-ci5cf]

Thanks for your prompt answer, will do my man.

[@dandeon3956]

I’m having this issue too! Flickering unless I have all Colors up to 255… did you resolve?

[@quietconfidence8070]

I also am having this issue, did this work for you?

[@SuperMario-ci5cf]

@@quietconfidence8070 still flickering I'm gonna try another brand of led lights to see what happens

[@richardeshom4985]

First off - thanks so much for this really informative video. It is inspiring me to think about adding some lighting strip features at my church, and I want to be sure I use compatible components. Now I noticed that your preferred LED strips are 24V, but the "second option" LED strips are rated at only 12V. Now the DMX decoder will handle anywhere from 5-24V, and I think the DMX decoder will use whatever input voltage you give it. You connected it to a 12V power supply. * Have you had any issues using the prescribed 12V P/S to power the prescribed (first option) 24V LED strips? If the converter's output to the LEDs is only 12V, wouldn't the LEDs give off less light, at only half their rated voltage? * Or; if the decoder's output to the LEDs is actually 24V, then would using the "second option" (12V) LED strips risk overheating or blowing out all the LEDs? Is this safe? Did I miss something somewhere along the line? Are LED strips rated at 12V/24V really all that interchangeable? If not, what would you change in the rest of the configuration if someone has already purchased a boatload of 12V LED strips? Thanks!

[@TheElectrican]

Great video. Jesus is the most important thing, especially in this day and age 🙏🏻

[@Deetz784]

Great video, if you don’t use the entire strip and cut it, can you still use the excess piece that you cut ? If so how do you wire ?

[@WorshipLeaderHangout]

Yes. It’s basically a wiring harness clamp. Four or five pin depending on what LED tape you have. You can find them on amazon. Just be sure to cut the strip in the indicated areas on the tape. The cut spot is also where you clamp the wires.

[@javierterriquez2426]

I have a project need your help

[@cjscanlon0205]

Would this be the same process if I wanted to use a dmx controller to control an rgb flood light

[@modellking]

more or less... most rgb floodlights already take DMX input so the decoder is integrated. The power supply is also most likely integrated.

[@johnathanjohnson3728]

Can u put two 16ft led light strips together to make one channel.

[@egg6649]

Yes totally, depending on how the encoder works it may start to get dimmer if you go too long, but our stage at the moment is using about 18ft per Aquarian’s and they are still full brightness (however seperate 4-channel controllers)

[@arlexcorrearamirez4785]

can i still do this if my LEDs are 24V DC Natural white color? I understand he did it with RGBW LED strips. Can it be done with Natural white colored strips?? please help

[@WorshipLeaderHangout]

I believe you would be able too. How many wires are coming from your LED tape?

[@peteraddo1983]

I have the onynx software and I can't get it to work for my lights. How do I turn the lights on with the onynx software