Love the build. Thanks for sharing your badass WPL. Oss
@MinutemanOutdoors5 жыл бұрын
Put a gooseneck on that frame, cut 2 beds down and make one long bed (frame length) and then cut the third bed a bit and attach it on top the gooseneck. Then you have a full OD green cargo trailer that you could potentially put the canvas top kits on.
@Roboticus_Prime_RC5 жыл бұрын
Yeah, I'm planning on doing it as a full 3 bed lengths. All my RC projects are on hold at the moment though, because I'm renovating my house to sell. I'll start back up in a month or so.
@detectivewaffle2 жыл бұрын
Just subscribed. Can't wait to see what other rc customs u have coming in the future
@Roboticus_Prime_RC2 жыл бұрын
You're in luck! I'm getting ready to make more content. IRL just got in the way.
@detectivewaffle2 жыл бұрын
@@Roboticus_Prime_RC I feel ya on that. It's the same way with me.
@mr.wildwood73425 жыл бұрын
That’s really cool just ordered 2 of these kits one for x-mas gift and 1 for me i like your ideas. I really wanted a 6x6 but the Cross version is too expensive so i opted for this version hopefully with upgrades it will be a fun truck.
@Hobbyrc7725 Жыл бұрын
Very nice..
@andrewviel66513 жыл бұрын
With the crown and pinion skipping you'll find that pushing the pinion further in towards the crown usually isn't the best option it will start to bind but instead Slide the crown over closer to the pinion or at least that's what I had to do with my full metal axles mine did come with bearings however those little bearings still have a lot of slop in them and it lets things skip and by sliding the crown gear over on the axle and making sure that the axle can't move back and forth inside the housing that's how I got mine to stop skipping and my opinion still moves up and down depending on the Direction it travels
@MrEzplay5 жыл бұрын
Cool 😎 and you also like the Coca Cola from Mexico👍
@mysteryunwrapping95184 жыл бұрын
Looks amazing
@CLAUDIOSRC95292 жыл бұрын
kool
@ingsanrc5 жыл бұрын
Great work 👍👍👍
@gabrielsilvaz41995 жыл бұрын
Nice job! 😉
@gabrielsilvaz41995 жыл бұрын
It was my idea.!!! I was the first #1 Watch @Gabriel Silvaz Videos were I go into depth on how to do this tire modification
@Roboticus_Prime_RC4 жыл бұрын
@@gabrielsilvaz4199 Your channel rocks!
@barnhartmd0519773 жыл бұрын
Can you do a video of making the dual rear wheels?
@uprcmd73935 жыл бұрын
Nice job!
@tronicsom4 жыл бұрын
Show de bola amigo parabéns
@aleksiykostin82724 жыл бұрын
Looking good 👍
@shipwrecked20065 жыл бұрын
looks great,go w/all milltary scheme
@Frisky05633 жыл бұрын
Great video you need a 5 ton m923 to pull that tank lol. 2.5 ton truck is to small lol. Thank you for making and explaining your upgrades. I'm new the the B16 truck. I have real trucks now lol
@Roboticus_Prime_RC2 жыл бұрын
I have a Bruder Mack in the RC conversion pipeline.
@johandaliramirez26865 жыл бұрын
Cool,but how can I change the plastic shaft for metal 4:06???????
@Roboticus_Prime_RC5 жыл бұрын
I cut the plastic ones off with some snips.
@matthiaskrapf24154 жыл бұрын
Well done Sir and one question pls, where do you buy the parts, greetings from Germany
@Roboticus_Prime_RC4 жыл бұрын
Mostly Amazon for me. The WPL parts are sold in many places, though.
@dylanjones22615 жыл бұрын
Love what you've done man, would u think one of these would make a good custom crawler base? I've been looking at em.
@Roboticus_Prime_RC5 жыл бұрын
They do! Though, the WPL C14 and C24 might be a better place to start since they come with a 4 link suspension.
@shanecollins64555 жыл бұрын
Could you put the link for the fiith wheel please
@Roboticus_Prime_RC4 жыл бұрын
Here's the one I used. Though, there are others now. www.thingiverse.com/thing:2825663
@huntingrc71615 жыл бұрын
nice job
@AnthonyGonzalez-lw1ek3 жыл бұрын
Question since the new metal gear drive or transfer case comes with a 370 motor can a 380 motor be put to it and has anybody done a brushless
@Roboticus_Prime_RC3 жыл бұрын
I don't have the metal transmission in this truck. But, they look like you can just bolt a different can to them. Will need a gear reduction too. Others have put brushless motors in them, yes. I think Tomley RC did it.
@ukaszszymura33335 жыл бұрын
Very nice. What kind of paint you used?
@Roboticus_Prime_RC5 жыл бұрын
Just some rustolium camo green.
@colossalbigfoot2565 жыл бұрын
Can you link 5th wheel? I can’t quite make out who you say to search.
@Roboticus_Prime_RC4 жыл бұрын
Here's the one I used. Though, there are others now. www.thingiverse.com/thing:2825663
@paulmaldonado19694 жыл бұрын
SUBSCRIBED 👍
@karanhazrah71915 жыл бұрын
Can you please tell me how to make hook to attach trailer ??
@Roboticus_Prime_RC4 жыл бұрын
Here's the one I used. Though, there are others now. www.thingiverse.com/thing:2825663
@carloshnunez4 жыл бұрын
Hi ¿what scale is the tank? The truck is 1/18 according to the real one dimension
@Farmtractor4 жыл бұрын
Hello! I know this is a late comment but. I would like to know how to get a metal driveshaft for this truck... and how to install it? I want to just put it on.. not grind anything. Any shafts I should buy?
@Roboticus_Prime_RC4 жыл бұрын
There's actually so much more available for these trucks now, than when I put this together. Just need to search "WPL metal driveshaft" from your preferred online store. Might also check out www.taigentanks.com as they started carrying the WPL and JJRC trucks.
@paulmaldonado19694 жыл бұрын
Great job . . . What type of paint did you use on rc .
@Roboticus_Prime_RC4 жыл бұрын
Just some cheap rustolium
@paulmaldonado19694 жыл бұрын
@@Roboticus_Prime_RC thanks for info
@RVJimD5 жыл бұрын
Neat looking truck! I'm not familiar with it. Where did you order it? I'll have to research this a bit, I need a 6 X .
@Roboticus_Prime_RC5 жыл бұрын
It's a WPL B16. They can be found on gearbest.com, ebay, and any place that sells RC stuff.
@RutgerJonaker5 жыл бұрын
Nice build ! Where did you buy the "turntable" for hooking up with the trailer ?
@Roboticus_Prime_RC5 жыл бұрын
I found it on thingiverse.com Just search for "wpl 5th wheel"
@RutgerJonaker5 жыл бұрын
@@Roboticus_Prime_RC Thanks !!
@shipwrecked20065 жыл бұрын
"fifthwheel"
@gabrielsilvaz41995 жыл бұрын
steve brady I used the 1:16 scale Diecast Wyandotte 1950’s toy truck fifth wheel that is very realistic vintage and hi dollars hard to find. I found some A few months ago but they sold fast now I don’t know where to find any😔
@mattwatkins97075 жыл бұрын
Hey did y0u make the printed parts? I am looking to make the same thing where did you find them? Thanks
@Roboticus_Prime_RC5 жыл бұрын
The hitch design is on thingiverse. I used shapeways to print it.
@takPROstoSMOTRI5 жыл бұрын
супер
@basant543215 жыл бұрын
Can you send me the link of the receiver and transmitter that you have use and plz upload the video of the connection of transmitter connection to battery and servo ..I m new at hobby
@Roboticus_Prime_RC5 жыл бұрын
It's all plug and play stuff. Except for soldering a JST connector on the motor. Lipo Batter safe, and low voltage alarm: www.amazon.com/gp/product/B01H4PXGJU/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 2S Lipo: www.amazon.com/gp/product/B0072AEHIC/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 Charger: www.amazon.com/gp/product/B00XU4ZR06/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1 Gearbox: www.amazon.com/gp/product/B07GTN276Z/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 ESC: www.amazon.com/Hobbypower-Brushed-Motor-Speed-Controller/dp/B00DU49XXS/ref=sr_1_1_sspa?ie=UTF8&qid=1540126892&sr=8-1-spons&keywords=10a+esc&psc=1 Radio/receiver: www.amazon.com/dp/B01CCB9IGG/ref=sxr_rr_xsim_4?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=9ddc66f6-9fc0-49ff-b2fa-06a39d9859e6&pd_rd_wg=SDFHK&pf_rd_r=TCYAXJRYCS91DR1DSSBB&pf_rd_s=desktop-rhs-carousels&pf_rd_t=301&pd_rd_i=B01CCB9IGG&pd_rd_w=4meUb&pf_rd_i=goolrc&pd_rd_r=99960f78-7277-45f5-a3be-d021439a05c3&ie=UTF8&qid=1540126930&sr=4 JST Connectors: www.amazon.com/eBoot-Connector-Female-Cable-Battery/dp/B01M5AHF0Z/ref=sr_1_3?ie=UTF8&qid=1540127321&sr=8-3&keywords=jst+connector
@johnpaulson29165 жыл бұрын
what is the run-time with upgrades ?
@Roboticus_Prime_RC5 жыл бұрын
Depends on the battery you get.
@johnpaulson29165 жыл бұрын
@@Roboticus_Prime_RC my jjrc runtime is about 10 mins trying to keep up with the hobby grade guys lol
@rcfreaks62814 жыл бұрын
Can you make me a 5th wheel and sell it to me?
@rcfreaks62814 жыл бұрын
Ill pre pay.
@Roboticus_Prime_RC4 жыл бұрын
@@rcfreaks6281 I found it on Thingieverse, and used shapeways to print it.
@rcfreaks62814 жыл бұрын
Brother you are speaking Chinese to me. LOL. Can you make me one, I will pay you upfront for it. @@Roboticus_Prime_RC