WPL LCG Build - Injora 14KG Servo Upgrade - Huge Difference - Crawling At A New Spot

My 17g JX servo has left the chat. It's time to get something a little bigger that can handle the extra weight from the bigger wheels and all the brass. I found a great replacement with the Injora 17KG servo. Only thing is I had to do a little modifying to get it to fit. Check out how much better it is when I take it out crawling. Everything I used in this build is linked below.
Inojora 14KG Low Profile Steering Servo: amzn.to/3WqAupr
LCX Racing Crawler Servo Mount : amzn.to/3OvcC28
INJORA 25T Servo Arm- Servo Horn Upgrade: amzn.to/3ON1nlV
Injora 1.9 Beadlock Wheels: amzn.to/3mUKHwN
24g Brass Wheel Hub Extensions: amzn.to/42a9du1
5mm to 12mm Brass Wheel Hub Hex Adapter: amzn.to/3K5dB6f
MN78 Driveshafts: amzn.to/3yFv26W
MN86 Wheels and Tires: amzn.to/3YVf2bI
75mm-85mm Suspension Links: amzn.to/3Z30xmg
AIMROCK 2-Pack 1/10 RC Crawler Aluminum Shocks Internal Spring Dampers 70mm: amzn.to/3S5IVUQ
LaTrax ESC: amzn.to/3if19FQ
1.55" Injora Stamped Beadlocks: amzn.to/3igEokB
My Old Wheels and Tires: amzn.to/3H1MhkM
Servo Plug Kit: amzn.to/3BLbMFZ
Bob Smith Industries Insta Set: amzn.to/3sW1crR
Bob Smith Industries Super Glue: amzn.to/35aEwf8
Ovonic 2S 1000mah Lipo Batteries: amzn.to/3rbJ25w
Servo Plug kit: amzn.to/3s34B7D
Flysky GT2B Controller and Receiver: amzn.to/3ISCfnA
370 Motor Metal Transmission:
Amazon: amzn.to/3q483Pz
Banggood: www.banggood.com/custlink/3GGYbtjyPm
9g Servo:
Amazon: amzn.to/3f2nC4b
Banggood: www.banggood.com/custlink/v3KRbVlR5d
Servo Mount: amzn.to/33jdzVL
Metal shocks with shock mounts: amzn.to/3p2y55d
Metal suspension links: amzn.to/3p1tZdC
2.5mm hardware kit: amzn.to/3F5AnpW
3mm hardware kit: amzn.to/3or0cNV
I am an affiliate of Amazon, Gearbest and Banggood. This means if you purchase anything using any of the links I provide in any of my videos, I get a small commission and it helps me out with funding this channel to bring more content. Thank you to everyone who had already purchased items through my links. You are all awesome!!
Support the channel by purchasing Shirts and Merch, link to my online store through Teespring is here: teespring.com/stores/ready-to-run-rc-merch

[@frankm3867]

Nice views in this video. In my youth I would be all over those rocks but I get anxiety just watching you in this video.

[@ReadytoRunRC]

I used to run across these rocks when I was kid with no fear. I have a little more fear than when I was a teenager but still pretty confident up there. Love the views. In the winter when the leaves are off you can actually see the dam where I make a lot of my videos.

[@ramsessilent]

More weight in the front always good for steep climbing! danger Will Robinson thanks for the share! stay awesome!

[@ReadytoRunRC]

Yeah I didn’t check to see how much heavier this new server is compared to the old but I would say it’s close to double the weight. Thanks for checking out the vid!

[@naelrc4583]

Faced the same problem with small servo after upgrade to metal axles. Great upgrade & thanks for sharing your idea for the big servo mount. Keep come the good work & please be careful crawling outside my friend😁👍🏼

[@ReadytoRunRC]

That’s one thing I like about this build. Coming up with ideas to make it work.

[@naelrc4583]

@@ReadytoRunRC Nice my friend😁👍🏼

[@gargolaconrad3188]

That's a pretty cool upgrade, and I loved the location.

[@ReadytoRunRC]

I live in a pretty cool area. We have this, the dam and a few other neat locations I filmed at all within a few minutes of each other.

[@gargolaconrad3188]

@@ReadytoRunRC I used to live in some pretty cool areas, like Colorado, Miami, Bahamas and the Florida Keys; Now I'm temporarily stuck in North East Georgia. Nothing but cow fields, farmland, and chicken houses. We also have a lot of woods, but they're filled with big briar bushes, all kinds of Black Berry bushes, and everything else with thorns all over them. Another thing is, that it's hard to tell most of the females from the cattle in the fields, and some of the chicken heads on Meth; from the chickens in the chicken houses.🤣🤣. At least I have a lot of wooded property and I'm only 20 to 25 minutes from South Carolina. Don't come to this part of Georgia, you won't like it; Nothing to do here.

[@ReadytoRunRC]

@@gargolaconrad3188 🤣🤣 I have never thought to myself “boy I sure would love to go visit Georgia”. It’s safe to say I won’t be heading there anytime soon unless I’m passing through on my way to Florida.

[@ToyotaGuy1971]

My old hitek hi torque servo ive had in my clodbuster for like 20 years just died, too.🙁 Thsts a really cool looking rig.👍 Jeepers, those hights! Got my clod back together, time to go terrorize some cats. 👍😁👍

[@ReadytoRunRC]

Thanks. It’s my creation. 20 years isn’t a bad run for that hitec. The rocks are a lot of fun to climb, with the truck and myself. Haven’t been there in a few years but it’s only like 15 minutes from my place and 10 minutes from the dam. Figured I would give it a try with the WPL. Have fun chasing the cats.

[@adrianharrison5208]

Looking for some inspiration and it looks like I've found it! Awesome build 👍😎

[@ReadytoRunRC]

That’s great! More to come on this.

[@UrbanLegendRC]

This build is so wicked I need to try this with mine

[@ReadytoRunRC]

Thanks! That would be pretty cool. Would love to check it out when you do.

[@zamoragera13]

Not bad man. I've got to try this. I love my wpl. They are inexpensive and there is so many option parts.

[@ReadytoRunRC]

Thanks! That’s for sure. So much can be done with these.

[@joepowers3731]

Sweet mod.

[@ReadytoRunRC]

Thanks!

[@user-cz3xl7fr1m]

Cool

[@nathanbegay4095]

Is the lcg servo mount plate a 1/10 for the servo

[@ReadytoRunRC]

Yes

[@nathanbegay4095]

Thank u

[@growingrcs]

Crazy lol