How To Repair A Honda Pump

[@jamieroberts6345]

This is a good example of the high water mark of Wranglerstar. Not over produced or edited. Just a bloke talking while he works. Thanks for the vid Cody

[@MdennisAK]

It's as if we are all hanging out in the shop, watching you work of course, maybe a cup of coffee and sharing stories. Always a pleasure.

[@surferonfire4470]

listening to you is kind of like listening to Bob Ross. soothing and inspirational, while teaching us techniques you've learned over the years. thanks Cody

[@Michael-db1ce]

With so many how to video makers out there I think the stories are what makes your channel unique.

[@Mindmazepottery]

I enjoy the stories of your family and the repairs of things you forget. Just proves you are human like the rest of us.

[@magicrobharv]

Cody, there is always enough time to hear another story about your grandfather. Great video!

[@DCPorter71]

Reading some of the comments I just want to say I enjoy these videos & don't mind at all that he gets distracted and talk about stuff. It's what makes the channel good IMO. He will get round to doing the repair eventually, just his style.

[@captainquint]

After one too many incidents like your pump freezing I sat down and made a fall checklist for all the little jobs that need to be done to button up the farm for winter. Took a year or two to get everything included but now I have a list I can run through in couple afternoons and I'm not cussing in the spring because I left something uncovered or an engine un-winterized. Saved me a small fortune in batteries that didn't go dead and freeze.

[@krmould]

Hi Cody, yah, it would be nice to get the repair done all in one video, but it is your stories, and the little hints on tools, that keep me coming back to your channel again and again. Rather than just a how-to video, I find your channel is more like hanging out with a buddy in the garage (or the house, or the forest, or at a fire). It is the hanging out that is the fun part....and if a pump gets repaired at the same time, well, that's a bonus!

[@danielanderson2030]

my father gave my brother and all of his tools. generations of mac, snap on, sk, just everything. however, I find myself 97% of the time working out of my crescent kit he gave me for my 10th birthday and some assorted harbor freight wrenches for the bigger bolts when I'm doing any suspension or pulling a fan. tons and tons of specialized tools I always found it easier to lay the box out on the table and just work from there. didn't even drive into the shop, I'd do it in the driveway, even done it in the dirt or the barn on a few occasions. hell, changed out the water pump thermostat and radiator on the side of the highway with that kit. nothing special like 135 pc kit. Couldn't live without it

[@johnaustin6649]

I love the little ditty's that populate the crux of the video's. My Granddad used to start a job with the intention of teaching me how to do it, only the ramble off topic to a ditty of something he once did or got told by his Dad. I would sit silently taking it all in. Just like this video, loved it.

[@TimLewallen]

These are my favorite kind of Wranglerstar videos.

[@donfillenworth1721]

Don't feel the need to apologize. I enjoy the stories.

[@surferonfire4470]

Me too

[@highislanddiy9361]

me three

[@adamwright9790]

The stories are my favorite part

[@NukeClock]

Signed.

[@agrt5689]

that's what in make outstanding from the mainstream!! I love it!

[@thinredline8939]

Hey I think what you're doing is Awesome. I'm a volunteer firefighter. I just got my firefighter phase 1 completed. Now I am moving on more and more into being a firefighter. It's something I love doing. I was always told I would be a firefighter, but I didn't think that would be where my calling was going to be. I am trying to get to were I can go on calls and get video of it or some of it. I'm learning what it's like to be a part of such a big family of men and women who do what they enjoy. Please continue to make the videos please.

[@gearheadted5110]

Yes, it is more fun this way. I spent a lot of time in my Grandpa's farm shop, and my best friend's dad's shop. I love all the old stories. Great vid.

[@TRAVERZULU3]

Being a no nothing specific to engine repair, breaking down your tools of choice and their application , how you lay them out is very helpful in setting up my shop tools. Thanks again for the insights.

[@sandygap1]

Cody, please know in my circumstances I never received any mechanical training while growing up. Now at 60 years of age while trying to save a few dollars and just want the satisfaction of doing things myself, I am just learning this fascinating trade. While I do not own a water pump you provided several insights about tools and ideas how to solve problems. Thank you so much for your wonderful videos!

[@Jasonandsonsgarage]

I like the stories, and how go off and talk about the tools and then back to how the pump works. I feel like I do the same stuff sometimes, I'm a diesel mechanic. Great video can't wait for part 2

[@cookinginthedark6768]

Cody, I always enjoy hearing short stories about your granddad. These kinds of videos are always very helpful to me. Thanks as always, Brad

[@DieterSchneider]

Honda is great. I bought a Honda lawn mower years ago and it always starts on the first pull, even after long cold winters.

[@Oregu7]

You are a more than decent man Cody. Thank you for letting us enjoy your personality, and knowledge for a few minutes at a time.

[@RealtreeGrizzlyBear]

Great video, it's like sitting in the shed with family Cody. Great stuff thank you.

[@mattedwards7788]

hey, just want to say that the end card segment where you talk about the little things means a lot to me (and im sure a lot of others think that too) it makes it almost feel like i know you personally, like the mailman you would greet at the gate. Matt. N.S.W- Australia

[@rockabillychuck]

I saw the title of this video and thought, this guys gets me.

[@Braz1956]

Wranglerstar working in the shop and telling stories at the same time - among the very best of KZbin.

[@kaboomer13]

I enjoy hangin' out in your shop with you every day!

[@LoneStarLiving]

To me what's special about your channel is your ability to tell a story. I love hearing about the old timers and how things used to be. Thanks for another great video!

[@kossgroupllc9196]

You're a well rounded fella Mr Wranglerstar. I try to be jack of all trades but I tend to never have time enough to get real good at stuff. The funny part is where you really have me beat is that my elder sons (twins) were kids (they're 24 now) I was in the Army and never was around to teach em stuff like you do Jack. Now I'm fighting for time to teach em stuff now that they're at the hard to teach age! I'm making up for it with my little ones ( my youngest is 15 months -- and we still hope to have a daughter if God grants it) but I hope the twins will stop being trendy one day. Sorry for rambling.

[@anthonydragani9308]

Excellent Video.I agree with the other viewers ,that the generational stories are very interesting window into the past.The tools are the icing on the cake. Keep up the good work.

[@bender4292]

The long winded vids are ok Cody! Most of us aren't just here for the content. We are here cause you are you! Because of the way you carry on sometimes I'm sure I speak for alot of us when I say it makes us feel like we really know you. I grab a wranglerstar fix every day! Keep up the great work.

[@steveowalk]

I'm really glad I've found your channel. I lost all of my grand parents before I was able to get to know them and they lived out of state. I've never had much appreciation for older folks, but you've helped me see their importance. I very much enjoy your channel! Thank you.

[@joycejudd5109]

Like your granddad, I struggle with "all things Japanese". But, yes, the quality of their products has become a gold-standard. From automotive to mechanical, the quality is there. I enjoy your stories along with your showing "how things work" and how to accomplish the "do it yourself" projects. Take your time...we'll still be here.

[@Satchmoeddie]

My grandfather taught modern firefighting and rescue techniques to the Army Air Force and later the US Air Force. He was extensively trained by Union Pacific back when they started using gas turbine locomotives, that burned anything from gasoline to fuel oil, which is similar to jet fuel. Some of their pumps were not self priming and they could pump from ponds, lakes, streams, ditches etc. They would put some plumber's antifreeze in their pumps. The stuff has a red dye in it now, and it is a grain alcohol base chemical. I remember when that time of year came around, and they would pour in the antifreeze, and I'd swear someone was drinking on the job, but wondered why I just noticed? It's the antifreeze that smells like booze breath! The best stuff I ever found was U-Serve. It is good for below -40 degrees. Put some of that in your pump's stand pipe, impeller housing, & manifold sections every fall, before the first hard freeze, and you are golden. Your pump is ready to go any time, it can't freeze, and that stuff kind of cleans out the corrosion too. If & when you need your fire pump, it's all primed and ready.

[@eatinginternet8690]

I really loved hearing about your grandpa, please share more stories in the future! Also I love just watching repair videos like these. It's something about making something old new again and restoring it that just makes me really happy.

[@KillerM1979]

Watching your video's is like therapy for me. I don't know what it is. Your voice and the subjects that you cover seem to relax me. Thanks for that.

[@oligee44]

Love the stories. Keeps me entertained for the whole video. Wouldn't be able to watch anyone else take apart a pump and not fall asleep. Great content thanks!

[@hannahmich7342]

I just epoxy welded my chain saw gas tank back together yesterday with JB weld. I even carry it on my motorcycle when I traveled to Alaska.

[@RatandCat]

What! To be continued!? I have to wait to learn how to fix absolutely anything!

[@skillage18]

First time i see that extension screwdriver ratchet thing

[@slashrjl]

Snap-On -- I don't know if they make then any more, but you can find them on eBay

[@Doughboy1941]

I would say Snap-On

[@tymebomb60]

they are called spinner handles a company named draper does on like codys were it has a female 1/4 drive on the end so you can use it as an extension

[@bigdon9681]

Popular Mechanic made a nut driver with ratchet end. I have one, but since Stanley bought out Popular Mechanic I haven't seen the item. I do know that Stanley honors the lifetime warranty of the Popular Mechanic hand tools so perhaps they make the tool, but don't put them in the took kits that they sell.

[@LEO1WOLF]

+rustyheaders - - thanks for the Model # Pally!

[@jamesmcguire3113]

this is one of the most well crafted,well rounded, Informative,story filled vids you've done, well done man

[@tylerbuchholz3234]

New subscriber here so this may be covered already. When you put that pump back together make sure to put some anti seize on those bolts or you won't be able to later. Worked in the river industry for awhile and the 1st thing we'd do when we got a new Honda pump was to take it apart and put anti seize on all the bolts. The pump you have is great, but I was putting new seals in frequently because guys didn't prime them or ran the pump without discharging for some time. That's how I learned the hard way about anti seize. Thanks. ; )

[@hathiphnath]

First a Honda, and now his grandson lives next to Mt. Fuji, too! Can't escape Japan.

[@scryermountain]

I love how you say Metric and Standard.For us its the opposite Metric and that other cursed stuff.I have enjoyed working with Imperial the last two years,it has helped me understand fractions way better than I ever did in school.love your work.

[@ArkansasPilgrim]

I thought about that, too, even though I think of English if I hear "Standard". Both are "Standards". BTW, the "English" standard is also called "Imperial", or "SAE" (Society of Automotive Engineers). I use the term "SAE", but that's because I one of those irritating, know-it-all engineer types. Actually, I try NOT to be like that. I must also state that I am a mechanical engineer, not an automotive engineer. Of course, if I was an automotive engineer, I would never admit it.

[@alanrouse8301]

Great stuff Cody. I relate to your story about your Grandad. It took guts for me to tell my Dad I bought a Toyota!!

[@fastfreddy80]

I agree with you Wranglerstar, I bought sets of Snapon wrenches and sockets so the core of my tool kit was high quality. It's not so important for screwdrivers and pliers to be super high quality but the tools that are always in your hand and that you abuse and still need to rely on need to be good stuff. I recently found I need six point wrenches though. Six point wrenches are a necessity for stubborn bolts and nuts to prevent rounding.

[@scotishpopcorn]

Wranglerstar, let's put all these detractors to rest. You have water on your property and you are inventive so you will have a way to not waste it and just test that pump. That way, you won't break in when you need it most. But, I'm sure you already thought of that, and they didn't wait for the next video. And for all I know, you could be in the process of doing that now, and I didn't wait long enough either. Keep up the good work. I learn a lot from your videos. by the way, I too have had great luck with JB Weld. Dan

[@matthenard]

Even though the video is supposed to be about the pump, I can't help but love some organization tips/tricks!!!

[@droyce4596]

nothing beats an upholstery tool. another favorite of mine is the hose clamp pliers, and the electric ratchet.

[@xraydelta100]

Enjoyed your stories immensely. And thanks for the fine information you provide.

[@wateronthefloor]

It is good to see that you are prepared for fighting fire on your homestead. Hopefully you will never have to use it. But if you are out fighting fires, does Mrs Wranglerstar and Jack know how to use this in your absence? Also, do you take any preventative measures in and around your homestead to slow down/prevent fire entering your property? For example, do you keep a parameter around your house where you avoid plants that could pose an increased fire risk? For example, do you have to keep the grass short so as to slow burning if a fire were to pass by your house? Or do you cut down any particular trees that could cause problems/catch easily? Thankyou again for your informative and enjoyable videos. Kind regards, Tom

[@thomastommy1192]

Thank you for the video and most of all. Thank you for the stores. You are lucky to have the memories with you grand father. He must of been a great man. I can hear the love you have for him. In your voice. I have enjoyed this video more than any other. I am looking forward to second part. What do you think about Craftsman tools?

[@geraldwilson3834]

I agree with having to work from a tool box . I also worked for Ford and had a tool cart such as you do that I loaded up every day with tools I assumed that I needed. At the end of the day I would wipe all my tools down and put them away in the tool box for safe keeping. The tool cart is such a handy piece. After I while I began loading the cart exactly the same every day. It wasn't long I could reach behind me and grab the tool I needed with out even looking at it. "Unless my fellow co workers messed with my cart ". Lots of joking around in the garage you know.

[@CedricAda]

Hows your 940 going without the clip? Did that do the trick?

[@ScottHaneyHello]

Those rolling carts are definitely nice to have around. I like the way you have yours set up - sure beats my typical, "Oh, darn, where'd that socket go?" setup.

[@beinbrek]

I would agree with you about the Snapon tools. I've used them. My own, though, are Craftsman tools I picked up in pawn shops. They're in good shape and I take care of them. Dad is a master mechanic and I grew up watching him and is brothers working on cars. I 've since worked on a number of different cars and trucks, mostly my own and worked on small engines as well. Until recently I did all the work on the cars etc. I owned.

[@larrymiller6285]

do what ya want Cody,you make the videos and I will watch'em.

[@turtlealberigi]

Do you have the Makita cordless impact driver? I use mine all the time in place of air tools.

[@chillaxter13]

I love the stories! I can learn how-to on dozens of channels. This is more like hanging out with a friend while they're fiddling with something...

[@ASMRAndMore]

I love your stories... Please keep them coming!

[@alexhunterni]

I am a snap-on dealer and I was stumped trying to figure out what that ratchet was I knew it was a snap-on head but never had seen that handle, I'm glad you explained I would have been left trying to figure out what ratchet that was otherwise 😄

[@npage307]

I think it's funny to hear you say "the hateful metric sockets." I've had three vehicles since a got my license, all of them Japanese. Almost all the work I've done has been involving metric tools. My dad has a Cadillac that hasn't worked for a while and he wanted me to work on it. Normally when I work on a car I can pretty much see the size of the fastener and get the right socket, but not with standard stuff. I was so frustrated trying to find the right sizes. So for me, at least when it comes to working on cars, it's always "the hateful standard sockets." Enjoyed the video, looking forward to seeing the rest of the repair.

[@ye11oman]

just a quick question, is there any major advantage to keeping both a deep and shallow socket set other than access in small spots?

[@mgreene939]

Is there a particular brand of panel tool you would suggest?

[@tinokarl64]

Hey Wrangler, always enjoy your videos here in Denmark. Love that you take your time and deny to speed up your videos :) Always felt myself that i was born in the "wrong" century with all this speed and no time for contemplation. Keep up the good work and bless you and your family.

[@AtimatikArmy]

Love the idea of the tool cart, so much more convenient when you are working on a project rather than constantly walking back and fourth to the big tool box in a garage because you grabbed the wrong socket, you just roll the cart to wherever you are working... Duh moment for me, but brilliant, I may have to adopt this, thank you! Great story about the custom Snap-On wrench, too! Always love watching your channel and hearing your common sense. Oh, I'm sure you know this if you are a regular JB welder (like me) but scuff up that case good wherever you plan to have it stick. It needs some "teeth" to bite into to hold on.

[@MasonDuke99]

I fixed the head on my Briggs and Stratton with JB weld. It's lasted 3 summers worth of mowing, and still going strong

[@curtwhite876]

I have a buddy who fixed a four wheeler axel that still works seven years later.

[@turnersparadise8368]

I cracked the case around an air cooled VW oil pressure sending unit. Literally broke out one big chunk of magnesium and a couple smaller shards. JB Weld held for well over 5 years till I finally threw a rod.

[@777strongcoffee]

The big turnaround in Japanese manufacturing quality is primarily due to one man. His name: W. Edwards Deming. He was an American engineer and statistician who taught Japanese companies about statistical process control..

[@stevenhardy2898]

Well, the Japanese must have forgotten after the war because when their products started arriving here in the usa .....there products were cheap and junk.

[@GreenAppelPie]

+The Marshmallow Man Apparently ford has forgotten what was learned at one time.

[@dougdobbs]

Actually, Deming is generally credited for the rebirth of Japanese industry after the war. He long preceded the Kaizen idea. en.wikipedia.org/wiki/W._Edwards_Deming

[@viewsandreviews180]

Cody, just a thought about your repair: have you looked into getting the pump case welded? It looks to be aluminum, while I've welded cast iron, steel and stainless steel successfully I've not had as much good fortune with aluminum but I know some folks that love to weld aluminum and seem to be very good at welding the stuff. I would bet there are some folks (isn't Boeing out your way?) like that where you live.

[@mattriddell8983]

Looking forward to part 2 and more stories. Thumbs up, WS.

[@Poyntebreak]

Hey Cody, So are you going to TiG or MiG weld that crack?

[@an4491]

you should get yourself a calendar for the year with what you need to have done by what date, like checking your engines etc. hang it somewhere you always see it and you will never again have a surprise like that again... might be a great gift also.

[@dangareau]

I absolutely love the handled extension.

[@patrickrenfrew6801]

I want that handled extension. Who makes them?

[@scooter041031]

love the stories makes it feel like a couple of friends shooting the breeze

[@s.m.sparks3485]

Are the nut driver/extension combos made by Snapon? I've never seen them before. Awesome tools though.

[@richardfuerst5188]

EXCELLENT VIDEO --I really enjoy your shows ,great stories ,great wood projects

[@WesleyAring]

The Blue Point cart is like the tool well in your carpenter's bench! :)

[@patthesoundguy]

I really like the stories and the hanging out in the shop. and I also like the voiceover at the end you have been doing. you really have the microphone working great.

[@geraldwilson3834]

Wow that is a dandy of a vintage air ratchet . Very nice.

[@ArkansasPilgrim]

When you go to fix the crack, you may find it helpful to drill a small hole at the end of the crack (where it stops out in the middle of the housing) This will prevent the crack from continuing to propagate through the material, which it will probably do if it isn't stopped. You can fill the hole with whatever you are going to use to seal the crack, but it would probably be better to size the hole for tapping for a #8 or #10 machine screw. Then you can screw in a short screw with an o-ring to ensure it doesn't leak, and it also won't blow out under pressure, which a simple plug might do.

[@StrangeDuck]

really enjoyed the video and the story telling!

[@bert26a]

I enjoyed your series about rebuilding that wildland skid, those electric hose reels are the cat's meow. Our Rescue/wildland truck had a similar set up but with a 18h.p. Briggs and Stratton pump on it, and it worked fantastic you could start the pump through a remote in the cab on the way to the fire and knock it down with a remote control bumper monitor it was like a mini-airport crash truck...On that note does your Fire Department still have that used crash truck for wildland fires? I was wondering how it worked in that role and didn't see it in your Fire Hall in the last episode.

[@haydenfox3116]

Cody, I'm 14 and I am beginning woodworking but before I go too deep into it I decided to make a small knife out of a saw blade, inlays made from flattened copper pipe, and wooden handle scales (all with hacksaws and files)... Anyways do you ever make tools. Not restore a tool or make a new handle for it... But actually make a tool?

[@DougieFresh208]

looking forward to part two!

[@codyl1633]

Perfect timing for this video! Just found my water pump was cracked last night

[@firefly5506]

Hangin out in the shop, some of my favorites.

[@cwporter9691]

My Father served in the Navy WWII South Pacific. He had the same problem when I bought my first new car. A 1969 Datsun (Nisssan) sedan.

[@shootermcgavin3476]

Best vid in a while! Love the shop videos. Looks like Fall has made it there already!

[@mrchaneyrc]

Did I miss something because I didn't see any JB Weld in the video?

[@mrchaneyrc]

+Michael Chavez haha no I got that part

[@kf4dcy501]

as you found out, jbsteel is an epoxy. you could have used any other high strenth epoxy to fix it. and the best way to apply it is like packing a wheel bearing. push it through till it extrudes on the opposite side. but first run some acitone around and through the crack. so your garenteed a fine adhesion.

[@radbot1]

One of my favorites is the universal joint that comes with most socket sets. I always overlooked it in the past but one time I needed it and it was a revelation! It makes accessing hard to reach bolts so much easier.

[@laurenskee112]

Lets take a shot each time he asks if something is nice

[@dbhoward56]

Reminds me of the 1960's working on cars till the wee hours of the morning. Building hotrods, driving them hard to make anything break that was going break, until you damn near couldn't break it.

[@johnw3443]

Great video cody , i just watched that series on the restoration of this and really appreciated the effort you put in to that . Preparing is caring :)

[@Falney]

If you need to replace the housing and you were to decide to crowdfund it so you don't have to be out of pocket. I would be more than happy to contribute to the cost. What you do is important, preventing fires from taking away the woodlands and that is an important tool for doing so. And not only that but I get great entertainment from watching your video's and all you get in return is gratitude and the occasional comment.

[@nolanmonahan6348]

I find myself liking almost every video I watch on your channel. I love how you share your faith, and j love how much I learn, on this same day, I watched your rant about how people were judging Dave Canterbury for making mistakes, which is our races curse, and I subbed today, I also subbed on all my other devices that have different accounts, I love your videos, thank you

[@r6exrider]

the key for me is have both a big tool box and a tool cart. i work in a large factory and work on injection molds. i jave my big tool box in the shop and whenever i can bring the mold to the shop i have everything there but a lot of times i have to go out on the floor anx work on the tool in the press. so i pit what i need on the cart and away i go but i usually have to make several trips bacl to the tool box even though i put everything bit the kitchen sink on my cart when i head out the first time.

[@josephwilson6651]

for myself your relating stories along with the practical features is part of the fun of You tube if I'd wanted just instruction on whatever your video happens to be about I am sure there are many produced by manufactures on You Tube

[@stevenpdxedu]

Cody, where did you buy the 'screwdriver' extension tool that you like so well, I'd like to have one but don't know where to start looking. HF? Thanks. PS The larger end wrenches and socket are so expensive that if I MUST use one I borrow it from an autoparts store that has a lending program. And I agree Snap-on ratchet handles are awkward, and what's worse is that cheaper makers copy them! Like Pitsburg.

[@WesleyAring]

Cody, you tell the most interesting stories :)