WRAP over PPF? Paint Protection Film + New Satin Black

[@megaautospa9403]

I was able to wrap my whole car using your videos. I would love to join one of your workshops when the money's right. Thanks again!

[@JustinAbroad]

Where did you get your film

[@azharbulbulia68]

Hi Christian. Thanks to your videos. I just wraped for my 1st time my complete M3 F80 with brack brush and kept the grain all along. It came out excellent. Thanks to all your hard work and videos. I watched most of your videos and kept to all your advices. Thanks and keep the hard work going. Love from South Africa.

[@Aepek]

Gotta add one more comment..... Just love watching you cut freehand.....it’s so mesmerizing & gracefully done, very smooth 😎

[@scottgillig908]

Christian....that New Satin Black looks great on Shaun 's car. Perfect color and vinyl the lays very well. Your floors look fantastic ! Some people may have glossed over how nice it is when you get the floors epoxied. One, it looks like a million, two, nothing looks as nice and clean as epoxied floors. They clean up really well also. I had my 3 car polebarn done 3 years ago and 3 years later i can't believe how well it has held up. I remember the first time I pulled in with one of my cars and turned the wheels on the newly epoxied floor. I had the windows down, and the sound of the tires on that floor made me jump. I clean mine with a citrus cleaner and it turns out great. Great video. Hmmmmmm...... I'm LQQN for the doggie bed, and don't see it just yet. Must be off camera LOL. Ü My best, Scott

[@hwt-ka-pth]

13:36 Nice. I had to rewatch that satin black magic, some five or six times.. Really thanks a lot for all the, mostly unexpected, tips & t r i c k s Greetings from the Netherlands!

[@mattmitch11]

Great job! Just got myself some Vvivd vinyl in the mail today. Can't wait to try my first wrap.

[@maxmasify]

Good luck with that bro. It is not easy to work with, especially when you're a beginner.

[@AJF4Me]

@@maxmasify Yup, I started with Vivvid but it was too difficult for a beginner like me, so I bought some Avery and it was a HUGE difference. MUCH easier to work with!

[@sdqsdq6274]

@@maxmasify lol, its a skill , not everyone has it

[@Gwl_Gaming]

That color looks great. Great to know that you can go over PPF

[@authentictacos8328]

Hey man I love your work, I just did my roof and quarter panels using your videos as a reference, I wish I could post photos and videos here and show you!

[@shuura]

Another amazing job in the books!!

[@rogerguinan2314]

Another great video Christian. Thanks !!

[@Dreamweaver_Farm]

Another awesome video! Question for you...how you you deal with sensors in the bumpers?

[@done5423]

Great info, thanks. What if you want to remove tbe wrap over the ppf later-is it possible to save the ppf and just remove the wrap over the ppf?

[@Aepek]

Have you ever thought of installing a digital(or regular) measuring system on your rolls? So as rolling off material, can easily see what length/size you need(or are at)? Just curious. Love the vids, & still doing amazing work👍🏻 Cheers ✌🏻

[@BucketList22]

Chris, have you ever used anything to fill in small defects like stone chips so they don't show thru the wrap?

[@rideNswagchlef02]

Hey chris Am a big fan of ur work nd I've been watching every single wrapping video of urs nd ur tips and techniques has helped me wrap better ... Nd I've been looking for ways to come to canada nd work there as i have many skills other then wrapping...nd every time i ask they always say that i have to get a work invitation from a canadian company or smthin like that in order to let me come there(for work nd residence purposes)... So if it's not to much to ask can gemme tips or guidelines that might help ... nd thank u in advance.. (Respect for ur work 🙌👏)

[@GR018]

Awesome job over all those imperfections.

[@rogerl7533]

Another excellent video, Christian. Apparently 3M does not warranty wrap removal on paint that was more than five years old when the wrap was applied. What has your experience been removing quality wrap which has been on a car for 3 or 4 years and which was put on the car with factory paint more than 5 years old? Thanks very much.

[@brentblawat]

Something about watching wrapping satisfies my inner OCD lol

[@joeb9763]

I love these videos. You are a master at laying vinyl!!

[@mattjordan5397]

Christian! How do you get your heat guns to last the 1.2mtr drops! lol Mine die after 1 drop haha

[@baldptdude]

Hi Christian, I plan to try and wrap my qx70, any video or tip on how to do the trunk/hatch? Seems mad complicated. Thanks in advance!

[@GrimYT]

I know this is an old video, but still hoping for a response. I want to wrap my PPF'ed car, and you say in the video it can be done. But when it comes to take off the wrap again would that not damage the PPF?

[@mohamedmaylou5636]

Keep up the great jobs on your video's ck.. Question? You were talking about the vehicle being old..I think you said 09 or 2010..anyway.. I have am 02 Lincoln with a original finish from the factory..car was always keepped clean..now here is the question, will the wrap be harder to do b.c the car is older. Or is wrapping all the same no matter the year of the vehicle.. On a side note..watching you encourages me to want to wrap my own car..and I haven't wrapped nothing before in my life..

[@jeffreyvarner6830]

Mohamed, the age of the car really has very little to do with wrapping. Age typically has more to do with miles driven and overall condition of the paint...eg...lots of rock chips, door dings etc. More attention to preparation may be needed, especially where you might want adhesion for tucking/rolling over edges.

[@CKWraps]

Exactly this

[@jeffreyvarner6830]

CK Wraps - Want to do your wrap coursework. Getting ready to do an 09 Range Rose HSE in Satin Black with Dark Light blackouts as well.

[@mohamedmaylou5636]

@@jeffreyvarner6830 ok cool..for the rock chips, should I wet same the edges down with 1000 grit same paper and I have like 2 very small rust spots,like 2mm wide..should I sand that smooth?

[@mohamedmaylou5636]

Another thing... what's the workshop class..do you hold sessions on how to teach a on how to wrap and if so how much are these classes

[@kimg724]

love it..vvid satin black more black

[@estebanvelazquez161]

Love that color of satin black

[@gk9417]

Can you put PPF over a wrap on front end ✌️🙏🇨🇦

[@LucasDV]

hello, i really love your videos! and they have inspired me to wrap my own car. i have ordered a piece of vinyl just to practice the techniques and so. the vinyl has a very nice gloss finish (hexis tomato red), i was wondering if i should use any application sprays so the squeegee slides better and avoids scratches. is soapy water good to use? i have looked for some specific application sprays but they are hard to come by were i live. much love from belgium

[@jackottinger6209]

Is it possible to wrap over a surface that's just primer? I got a new fender and I'm wrapping my whole car rather than having it painted and wanted to know ahead of time. By "possible" I mean will it stick close to as well as it does to a painted surface.

[@CrixyTnT]

Awesome one as always bruh

[@eval7952]

Just for practice, is it ok to leave wax on car? Or can that somehow cause any damage? Trying to find out if there’s anything wrong I can do while practicing wrapping that can damage my paint.

[@JosueHDi]

What are those roll racks?? Is it custom??

[@Archeagle]

I really like this color

[@Delc0]

Does this car have ppf around the door frames? I would like to see that if possible.

[@josephlearn6409]

What is the ideal temperature to apply a wrap to a car?

[@DGraphix2017]

Hey how come you laid in this time and didn't bridge the recesses in the hood?

[@estebanvelazquez161]

Just one question , can you use PPF over a wrap ??

[@roastedhd2852]

So I can wrap over PPF? Will it damage the PPF when I remove the wrap per say?

[@stuntar-gx6pm]

Have you ever peeled off vinyl wrapped that wrapped over ppf? Will the ppf damage or peel off as well?

[@NINE9XX]

I’d like to see a satin black wrap with gloss black chrome delete

[@bryanmouton8173]

Can you wrap over rust or would that damage the wrap?

[@axelst.776]

By pliable you mean it is more pliable than Vvivid+ matte?

[@JTAMEDIA]

Keep up the hard work

[@MrAjwin]

If you remove a wrap that was applied over ppf will it damage the ppf?

[@CKWraps]

Most likely not if your careful upon removal

[@GREGreg1]

Hi please let me know if vivid film sold at Walmart is original.

[@CKWraps]

It's not

[@nssdesigns]

Watching this and enjoying it but can you tell me why a customers (on the Mercedes video ) would buy a brand new white Mercedes sports car and wrap it in white? Why, I just don't get it...

[@valkyriesurvives5109]

Because it protects the paint to an extent, but they still liked white. Plus the wrap is cheaper than PPF

[@nssdesigns]

@@valkyriesurvives5109 bit like putting plastic on your sofa as you can't afford to get it dirty. But what ever the client wants. Still interesting process. Off to get certified with Avery vinyls.

[@VViViDVINYLS]

The resale of a new luxury car that was wrapped is considerably higher than one that wasn't. When that wrap comes off for the new owner, the surface will have minimal damage, paint will not have been subject to UV degradation. Chris should do a video on a car that was wrapped 3 years vs one that wasnt of the same year and compare the condition of the car.

[@nssdesigns]

@@VViViDVINYLS good to know. I live in Scandinavia. It gets really cold here like -25°C easy. How do wraps hold up in extreme environments?

[@VViViDVINYLS]

@@nssdesigns If it was wrapped and properly cured ( wrap needs a couple hours of heat to fully cure. Leaving it in a heated garage will work). It will last just fine, in montreal we have many weeks on -30+ and most of the cars CK wraps are subject to this weather as well. The heat is actually more detrimental to wraps than the cold.

[@rudystefan1714]

Can you wrap it using ppf?

[@mikey3239]

why not remove the ppf i dont get it is it just for video purpose

[@trig8364]

just order some vinyl from vv!

[@madebyscratch]

Love the satin black.. But when someone only wraps the hood, it looks like a replacement hood still in black primer.. Keep up the good work and let's see that new JEEP!!!

[@brandona.deimel5155]

My concern is more when you take it off. :)

[@TocyBlox]

The sticky is weaker on the wrap than the PPF. It would be fine.

[@keco185]

Can you do PPF over vinyl?

[@imaliastv4125]

Yes you can

[@karlpoglitsch1087]

Almost like watching the Matrix!

[@CKWraps]

😂, I caught it as I was going through the video. Thought it would be cool to slowmo it

[@c7uk]

...but WHY wrap over PPF rather than remove it?

[@c7uk]

16:20 ok, but again, why would you ever wrap over it?

[@VViViDVINYLS]

@@c7uk Removing really old ppf can be a very daunting task, the labor involved in removing it and any adhesive residue can take twice as long as the original hood wrap. It also serves as protection from rock chips since wraps are thinner and more prone to damage.

[@c7uk]

VViViD VINYLS - I suppose it is a large area to clean up with a Toffee Wheel

[@VViViDVINYLS]

@@c7uk Toffee wheel :D! Yes there is a potential of this and it can take hours sometimes to remove old, cheap ppf.

[@flatlandAutoSales]

WHERE WAS THIS VIDEO 2 days ago!!!!! I started a BMW and it was covered in PPF, I just peeled it all off, took me 4 hours!!

[@Swish36]

Wow. Took an L there buddy

[@flatlandAutoSales]

@@Swish36 I dont consider it an L. It's my car, so it's all learning.

[@RCbashingtheKRATON]

you can,,, but you shouldn't...REMOVE

[@theniceones1613]

The REAL question is, can you use PPF OVER vinyl wrap?

[@imaliastv4125]

Yes

[@jupiterchungkham2718]

You are not doing it right

[@m_styles1981]

Can you do PPF over vinyl?

[@CKWraps]

Yes