A Scammer Almost Got Her Gold Rolex...

[@taylorjoshd]

Anyone else in here know absolutely nothing about watches? But just love watching this dude work on them?

[@MentalSpud]

Absolutely! He popped up on my feed 2/3 days ago, watched 5/6 videos of his already 😅

[@ZEDD999]

@@MentalSpud lol relatable

[@sovereignmindsummit5123]

I know next to nothing, but I am learning a little bit more about how they function with each video of his I watch.

[@thirtyohsixer]

Must be satisfying for Denise to have a video of the watch being restored. Like the ultimate sense of comfort your watch is back to brand new.

[@laus7080]

Brand new? what

[@PatrickD_Go]

Hey Marshall, because of the videos I got an old (non-running) pocketwatch from a flea market, took it completely apart and got it back together. Now at least I can set the time, wind it up and with a little pushing it runs as well. I replaced the broken main spring but the balance spring is bent too much and a few jewels are broken so it won't stay running for more than a few seconds but it was still a success in my book. Not ready to invest that much into the tools to fix it yet but it was incredibly rewarding none the less

[@Quickened1]

It's a dying art, and unfortunately, the demand will only decrease as time goes by. However, there is great satisfaction in completely disassembling something, and then successfully reassembling it! I had a chance to receive higher education in the field when I was much younger, and still regret not doing it to this day... If you like it, get it while you can, before it's gone forever...

[@snuffying]

@@Quickened1 its absolutely not a dying art. it just costs way more and not a lot of people are willing to invest time and money in this art, which makes the exissting ones more expensive

[@Quickened1]

@@snuffying "not a lot of people are willing to invest time and money in this art"... The very definition of a dying art!!! The fact that this art is quickly disappearing, is the reason the ones left practicing it, become very expensive... Take it from someone who knows, it's IS a dying art... As wristwatches become less and less of a thing due to the cell phone, the demand for a watchmaker will also decrease, until one day, there will only be hobbyists in the art...

[@160fossil]

The same way blacksmithing was down to less than 2000 people, now there are more hobbyist blacksmiths than there were professional blacksmiths at their height.

[@jimtuna1354]

​@@Quickened1lmao right says in not a dieing art then says not a lot of poeple willing to pay for the work to be done so y would people invest there time in learning something that doesn't have a high demand so yes it is a dieing art

[@wmdeutermann9317]

Marshall, I am a lover of old pocket watches and have had my share of both scammers and poor workmanship. My most recent experience was a restoration of my father's Illinois wristwatch. A beautiful and expensive job, but it only runs when lying flat on a shelf. The same professional analyzed my 19 jewel Elgin lever set problem and concluded that the lever opening was too small and needed filing. I declined. My wife suggested that I learn to do it myself. After watching many of your restorations I signed up for the watchfix classes and started exploring many of the books out there as well. I have learned enough to be aware of how little I know! At the age of 85 this past August, I am not sure how far I can sail but so far I am successfully launched. When I opened my Elgin to examine the lever problem, I immediately realized that the restorer had simply indiscriminately oiled here and there and did little or no cleaning. As I write this, all parts other than the dial, hands and pallets are in the sonic cleaner. I will never stop watching your videos and learning from them. Thank you for providing the stimulus this old dog needed to learn some new tricks! Yours, Bill Deutermann

[@w2cfx]

Hey just stumbled upon this comment and want to say it's amazing to see someone at 85 still picking up entirely new skills. I hope it isn't patronising but I'm cheering for you!

[@wmdeutermann9317]

​. Thank you. 😊

[@rawr51919]

Nice to see an old-timer giving it a try! Hope it works again after you're done!

[@wmdeutermann9317]

@@rawr51919 Running nicely! So far it gains about a minute a week. The set lever probldm turned out to be nothing more than a loose screw LOL. I'm working on an Arnex 6325 just now. It had a broken screw in the barrel arbor and 5 missing teeth on the barrel lid gear. After a few days of searching, I found a gentleman in Canada who had 5 "new old stock" barrels complete with spring. Awfully nice chap. He threw in a couple of parts an a new screw! We are off to Edinburgh for Christmas and Hogmanay with family including our almost two month old grandson, Angus Ironsides Graves. When we return, my new parts will be waiting. Life is sweet. ,,,, c'', }

[@wmdeutermann9317]

My Elgin is doing great! And the setting lever problem turned out to be nothing more than a loose screw that served as the lever's axle LOL.

[@93mshep]

This guy HAS to be undefeated in the game "Operation"....

[@kwaaaa]

Lol, i spat my drink to this comment.

[@saintvault13]

LOL! Great comment

[@coolbreeze6198]

😂

[@andrew4274-q4m]

😂😂

[@joniden2215]

This is a GOAT comment.

[@tylerk.7947]

I am literally blown away at how complex the inner workings of this small watch are. I didn’t expect that. This is incredible.

[@stevenlengyel6651]

Definitely complex

[@243wayne1]

What did you think was inside? A hamster wheel?

[@ZapejoMC]

⁠would that really be so far fetched? I think a teeny tiny hamster could manage.

[@jorgemora9538]

@@243wayne1yes. With a mini hamster that u replace once it dies.

[@90whatever]

Partly why they are so expensive. Each part is made to high tolerances

[@gcmehojah]

You are so much the Bob Ross of watch restoration. Thank you for all of your videos and content!

[@iliketowatch.]

I know what you mean! I'm not even into watches (haven't worn one for years) but his videos are so well made and satisfying to watch that I can't resist.

[@steviedmrbk5179]

Happy little mainspring! 🤗

[@dont-want-no-wrench]

please, bob ross was a hack with a schtick

[@brandonriddle4381]

I knew if I scrolled, I would see a negative comment. Should have resisted. It never fails.

[@christinacasteel3198]

Bob Ross???🤨 He is much more a Rembrandt or Monet🥳

[@famousamoso7]

As someone who doesnt wear watches, cant afford a Rolex, and has the patience of a 2yr old, this video was awe-inspiring. The attention to detail, the ability to remove every little component of the watch and know the exact order to reassemble everything is amazing. Every time you removed a component the amount of anxiety I was feeling for you was through the roof.

[@cagneybillingsley2165]

this level of mechanical aptitude, attention to detail, and spatial memory is entirely genetic. you can't train it, you have to be born with it, then you hone it as you go through life and it selects you for this occupation. this is why a lot of occupations are generational.

[@xTryst]

@@cagneybillingsley2165Anybody can learn how to repair watches. Some may learn faster than others, but your occupation is definitely not genetically selected at birth.

[@juanroyroy2075]

@@cagneybillingsley2165I… disagree. You need a ton of experience and knowledge to be able to pull this stuff off. Does not come from genetics. I forgot to add that with the amount and access of watchmaking tools for varying budgets basically anyone can start doing this. Just my opinion though. For example I just purchased a knock off Horia Jewelsetter, can also be used for hand setting. Tools like these make it so that this type of thing can turn into almost a sort of hobby with how much easier it becomes.

[@Fanta....]

@@cagneybillingsley2165 Interesting comment. I guess we all have a particular talent, Its just a matter of finding what that is. Some are useless in some sense of the word, some can pay very well.

[@sundance2005]

@@cagneybillingsley2165 Testifying to that, I am a retired aircraft mechanic, I worked on the big parts of the aircraft. But in the instrument shop where the cockpit (sorry we can't say that anymore) flight deck instrument were repaired most of mechanics there were or had been watch repairmen. We would bring our watched to them and most had a side business fixing watches. It takes very special skills to repair watched and instrument such as you find on an aircraft. But most of the new aircraft have 90% electronics. There are still a few standby indicators in case of an emergency when the chips are down.

[@Quickened1]

Man, you took that apart like you knew what you're doing!!! I come here for your horological skills, I stay because you're an incredibly thoughtful guy... Awesome!

[@AzecTheButcher]

The patience to do one edge at a time on that bezel is extremely impressive. Excellent restoration!

[@chrismack5908]

I'm so happy for Denise that you were able to restore her Mom's watch for her! Here's to wonderful memories, Denise!

[@TUTOMIA]

Thanks so much Chris! I'm over the moon!

[@Smartzenegger]

Denisimo!

[@margodphd]

​@@TUTOMIAThat must have been an awful experience. Glad to know it all ended well, it's worth so much more by being a family heirloom. I have no idea what type of person can live with themselves scamming people for living :/

[@TUTOMIA]

@@margodphd it was awful, yet a learning experience. I am so blessed that the watch was "returned to sender". These scammers are mostly very good at what they do. We're all so vulnerable.

[@jeremy.thejeweler]

Bench jeweler here. I’ve been refinishing Rolexes and rebuilding and refurbishing bands for years. It’s kind of one of my specialties and something that I just really love to do. If you’re interested, I’d love to give you some help with your refinishing. There are many things you can do to not only save yourself time and headache, but also just vastly improve the final product overall. I’d be more than happy to help. Anyway, I absolutely love your videos and have been a fan since you started. I think you are doing a massive service to the industry by exposing a huge new audience to the trade. Thank you!

[@Del_Monico]

"you are" refinishing??? Learn English Jeremy.

[@satchel5909]

@@Del_Monico You are joking.. right?

[@NaturesLantern]

Is this watch plated gold? Solid gold? or stainless in gold color only?

[@NaturesLantern]

@@pjaypender1009 ok that makes sense how he can buzz out the scratches on the bracelet

[@Kolohekat]

Do use clean the dial face? or leave it like this KZbinr?

[@AnOldYoungGuy]

Always great to see a new video from you, Marshall! You're by far my favorite watchmaker!

[@2creativo11]

Denise is so fortunate to have such a piece in her family and very lucky to be able to see her watch being refreshed like this. Thanks for the great vid!

[@DrRandomStranger]

Marshall! Give us the state of your personal watch collection!

[@Thebizel]

I'm curious about that too !

[@frankv7068]

I seen a Pepsi on him and this DayDate, yea I’m also looking forward to seeing his collection.

[@jasonchatham4170]

This

[@colinwright5297]

Not a good idea parading one’s goods in public.

[@jasonchatham4170]

@@colinwright5297 dude! Be quiet! We almost got him!! 😅

[@MikeT]

I know a lot of people love patina but I like that you restored the case. It looks great. Also, F the scammers

[@TUTOMIA]

Hi Mike. I love how she turned out. I completely AGREE with you, F the scammers.

[@JeronimoStilton14]

As an engineer I love seeing custom tooling but god man you must have tens of thousands of dollars of gear for this. If only we could all be able to do our hobbies this justice

[@MrJoeinz]

Marshall . . . you're a wizard ! Your hobbyist days are over . . . it's all craftsman from here ! Thank you for the entertaining dismantlement and rebuild ! Bravo, sir !

[@LiborTinka]

I always had a respect to watchmakers (something I would never had a patience or nerve to do) but seeing you actually do the job is jaw dropping. I work in a lab and it's often tedious precision work (with a tiny error-margin) from time to time, but this level of precision and ingenuity that humanity achieved many decades ago and still improves is hard to believe. Keep up the good job!

[@GumriRN]

This Denise‘a Rolex story gave me chills. I’ve had my Rolex exactly like Denise’s except mine is Gold & Stainless with Diamonds. My hubby just took mine in to a Rolex dealer in Thursday. The week before it would stop now & then AND when I washed my hands some moisture on the Crystal. Everything you said about hers is what happened to mine. I have worn mine everyday, for the last 32 years. It was a birthday gift. What bothers me is, I took it into the Rolex dealer every 3-4 years but mine was in just last year & this happened already! But what REALLY gave me chills watching THIS video is, my name is Denise too. If I had known of this channel, I’d have sent my Rolex to you! Hope this Philly Rolex dealer does a better job than the New Jersey dealer last year.

[@TUTOMIA]

Hi Denise, what an interesting coincidence. I hope your watch is working like a champ. Sincerely, the other Denise. 😊

[@skwerlz]

The appropriate term when there's a person directly controlling the machine is "manually machined." I'm still in absolute awe of the craftsmanship in these watches, particularly anything before 1960. The tolerances these people maintained and the size of these parts are crazy.

[@ritaamundson3094]

I’m not one to comment on videos much. But I adore your work and your videos! I stumbled upon your channel and was quickly hooked! I love your explanations and how it works insights. Your love of the craft shines through. My only complaint is that I worked my way through all your videos and in trying to find others to watch I realized what a high quality product you create. I’m having trouble finding another creator that covers all the points you do with the appreciation and joy you show. You have spoiled me. You are my standard and most have come up short. Appreciate what you do and look forward to more in the future.

[@tonys9413]

Marshall, you bring order to a crazy chaotic world. Thanks for the therapy, and the always great video!

[@unfi6798]

Totally agreed.!

[@Jeroen_W]

I have nothing with watches but this is very therapeutic and fascinating to watch!

[@gregc2467]

Agreed, one of YT's most decent people.

[@Saratoga1965]

I’m amazed Marshall! I’m not a watchmaker, not likely to become one in my retirement years and in fact, not the least bit mechanically inclined. But,…. you’re able to hold my interest and bring me to concentrate on every detail and nuance of what you do. It’s apparent to me that you’re a skillful and talented watchmaker. You’re also modest and I particularly like that about you. I’ve been carefully studying your videos and little by little learning the nomenclature and procedures to the point that I’m often catching myself smiling self satisfactorily whenever I’m able to call out a part or procedure before you yourself. Please keep doing what you do and how you do it. It’s always educational and entertaining as well. Thank you Marshall for many hours of rich and well done content. I wish you all the best of success going forward. Chet

[@garetkonigsfeld2]

Very nice, I really like how respectful you are with your work. I've never seen you do to much but you always do what's necessary. Thanks for taking us along 👍.

[@ShodHorse]

I've been watching your videos for awhile and I'm always impressed with the fact someone who has no idea what parts are which and their functions, but you always explain everything in a way that is understandable. You never leave out the simple stuff. Keep on keeping on.

[@Trapper50cal]

On some symbolic level, watching you return complex systems to order from disarray helps me maintain a healthy confidence in my ability to solve problems and endure whatever strife I may be experiencing. Very therapeutic and calming. Along with just the pure joy of learning about automatic movements :-)

[@cellajones]

I totally agree. I was in a terrible mood before starting this video, and it has put me in a wonderful calm place and restored my faith in humanity as well. Thank you for your labors of love!

[@dobiejames9881]

I must say that your videos are captivating, I literally get into a zone and block out everything thing around me while watching you service these watches. Thank you, Marshall.

[@rogerrocco5211]

I’m not aware of your full time profession but I hope you love it as much as your hobby. It’s a pleasure to watch you work because it is so obvious that you love what you’re doing. Congratulations for discovering such a wonderful and satisfying endeavor. It suits your personality beautifully!

[@kageotaku]

He works as a commentary for Magic the Gathering. He also has a podcast on the same topic. I believe the commentary jig along with writing articles is his main income.

[@vezokpiraka]

​@@kageotakuit's wild to be a Magic player that knows Marshall from there and see people on his watch channel who only know him from this. Marshall is truly amazing

[@auntkaz815]

You are an absolute artist. No cutting corners. And restoring to the original look even if it takes a lot of time to make that happen… Respect to you. Sir!

[@mrblack5145]

My daughter wanted to watch this before school with me, unfortunately we had to cut it short; per her request, I am supposed to pass it along that you failed to say "bacon grease" (braking grease) during the barrel reassembly. Its her favorite part. She also says this is the most beautiful watch shes ever seen, and she wants one herself. Excellent work as always, I'm confident Denise will enjoy it and it will be a treasured family heirloom for years to come!

[@aserta]

If you keep an eye in local markets, they sometimes pop up. Could make a good graduation gift one day, when she's older.

[@mrblack5145]

@aserta you're right about the gift idea, unfortunately I've got multiple children so I'd have to get an equal gift for the rest of them but I can only spare one kidney. 😂 I'll keep my ear to the ground though. She really is fascinated by mechanical watches and she's got a small collection of non-functional pocket watches that she'd like to get up and running someday.

[@LoremasterYnTaris]

@@mrblack5145 Might think about getting her some books on watchmaking/restoration, or possibly some of the basic tools if she's of an age where she could use them (or save the idea for the future if she isn't). My understanding is that those old pocket watches are great practice for beginners, and that'd be a great way to get them running again if she's really passionate about it.

[@mondrose4501]

im a bit of a tinkerer myself. and yeah a bit similar situation with you, while the boys run around......with their mom (they follow after her i assume), a knock on my diy workshop corner door and a peek from my daughter, askin what im doin and just sittin there silently watchin me workin on some treatment to the steel. and now she can help me doin something already. i kinda expect my boy to do this but its my daughter instead.🤣

[@TUTOMIA]

Mr. Black, I'm beyond happy to know my Moms watch was in gifted hands. She's going to arrive today. I can hardly wait. I love that your daughter calls the braking grease, bacon grease. Too cute. I think your daughter has excellent taste in watches. Good for her, maybe not for you if it comes out of your wallet. :) But your daughters worth it & she would treasure any watch you'd get her, for sure.

[@emmanuelnoisette8937]

Marshall you show that you are a real expert in watch service , if ever have a watch of this model you will be the one to send it to. great job.

[@fresky5370]

I have a Seiko, special to my heart because my dad bought it and gifted it to me. Not looking for you to fix it just wanted to tell you it's story. I sent it off to be serviced in Japan, unfortunately this was just before the tsunami. The storehouse where is was got destroyed and my watch was lost. Two years later I got a package and amazingly it was from Seiko, my watch was back! Fairly damaged on the outside with a cracked screen, damaged bezel and scratched up to hell but still working perfectly. Apart from battery replacements and a clean or two at my local jewelers I haven't let it go out of my sight since.

[@orchdork775]

Wow, that's amazing that they found it years later and sent it back. Leave it to Japan to have companies with integrity that actually care about providing good service to their customers. I wish it was like that in the U.S..

[@Zbakenmcak]

I find this hard to believe

[@davepirtle9790]

​@@ZbakenmcakI wouldn't find an interesting if you won't comment about how they do or do not please something I need to, but they have no problem going to movies and reading fiction books. So my question is what's the what's the purpose of making a comment like that?

[@davepirtle9790]

I'm curious how they were able to track it to the owner. Does it have some kind of ID or something on the inside?

[@peterduncan1322]

If my Mother or Father had given me their watch and I had watched this video , there is no way I would not have tears rolling down my cheeks , not only for the care and craftsmanship you showed but the memory of those I have loved all my life. Again sir my hat is off to you...

[@steadyeddie7453]

I don't know how I landed on this video but I have a newfound respect for a trade I knew little about- watch repair. And as a retired machinist I enjoy looking at the precision tools made just for this kind of work. It's eye candy for me. Cheers.

[@robsterenborg]

repairing these tiny watches is one but each time I look at this, I am more and more impressed how all these parts were machined and produced. Well done repairing this piece

[@brians654]

Stunning camera work; the close-ups of the crown gaskets were amazing. Thank you for putting so much effort into these vids, much appreciated.

[@JuneQuinn-sz5pr]

Great job Marshall…I’m a retired watchmaker (in the early 70s I was the youngest licensed watchmaker in the State of FL) and wanted to comment on the dial issue you mentioned. You are absolutely right about trying to clean up old watch dials…you can do way more harm than good. Back in the day, I used to send damaged dials to a company in Miami (Miami Dial) to be refinished. Bob, the proprietor, did a fabulous job of making those old worn out peeling, flaking dials look brand new AND for a very reasonable cost. Are there still companies around that provided such a service?

[@tgh965]

What an incredible story right out of the gate! I've been watching you work on watches for more than a year and I really love what you do. Thank you for bringing us along!

[@philiprice7875]

i can not imagine what the owner was thinking about,1st sending it to a scammer, getting it back then lost in the post, i bet she felt sick and in tears, but now those tears are of JOY, great work Marshall.

[@TUTOMIA]

@@philiprice7875 Hi Phillip that 's pretty much exactly how I felt during the crazy watch journey. Marshall is an incredibly kind and talented person. Someone mentioned in the comments, that I should buy a lottery ticket, one day maybe I will. I do feel that I was very lucky in this instance, but more blessed than I could imagine.

[@Yonder.]

this is one of the only youtube channels i cant skip through its so enjoyably to watch every single detail of the watch and it being brought back to life!

[@ChipsPlace1952]

Marahall, I have been away for a while, and you still amaze me of the talent you bring to reatorarion. You are great in your explainations and it seems.when a question pops into my mind, you answer it. I am sure what you do is no different than build an automobile engine, it can only go back together one way. The right way. I do.want to try my hand at it but.....something really simple. Thanks for your time and effort.

[@A1iiiiii]

I get why a lot of owners opt for keeping the patina, but seeing the outside restored as well is sooo much more satisfying . Great video!

[@micahsexton4281]

My pocket watch and screwdrivers arrive today! So ready to start dipping my toes into this hobby, partly because of you. Keep up the excellent videos!

[@mickbrown815]

Send it UPS!! She’s so lucky!! Your videos are very relaxing to me to watch! Great detailed video!!

[@TUTOMIA]

Hi Mick, I was very lucky & learned a very valuable lesson. I really enjoy Marshall’s channel too.

[@darolfitch8917]

Thank God, the watch found it's way to you. The owner must be so relieved. What a beautiful watch. Thanks for the video.

[@TUTOMIA]

Relieved hardly describes it friend, Thank you for thinking she's Beautiful. Marshall is an incredibly talented man.

[@Smartzenegger]

I think he has the same watch, as you can see him wearing it on his wrist during restoration. @@TUTOMIA

[@andyk1996]

Amazing as usual Marshall. Would love to see you do a Chronograph like a Speedmaster one day!

[@mathiasklareus1782]

When you said "if it is your first time with us", think about the joy of having all videos to see for the first time 🎉🎉 You my good sir, is fantastic!

[@fafadk]

It's always a very wholesome experience to watch you work. I love your dedication and genuine care, both for watches and owners. Cheers.

[@imdeaded]

Such a treat to see this video. Coupled with your voice it has a soothing relaxing asmr feeling. Speaking about hobbies, id rather vicariously hobby watches through you. Watching you disassemble and reassemble them is relaxing. Thank you.

[@mikefochtman7164]

Always enjoy your videos. The great detail and time you take is an inspiration. Whenever I think of how tiny all those parts are and you just tear it down and service these instruments, I'm totally impressed. Thanks for taking the time to share.

[@MikeGervasi]

I don't really wear watches anymore but I do appreciate the mechanics and art of them. I enjoy seeing you work in detail and there's something satisfying about it.

[@FireAngelOfLondon]

Fantastic. You don't just treat this like a job to be done you take it to heart, which is great for you and your customers. Work you love doing isn't work, it's being paid to play, so you'll live longer and have a lot less stress if you can find something like that to earn your living. I hope Denise also sees this and appreciates your passion for your work.

[@TUTOMIA]

Hi there! I absolutely appreciate the passion & kindness of Marshall. I believe he's the best watch repair artist out there.

[@Benri05]

Been binging your videos for a while now, got the courage to fix the seiko 5 that my uncle gave me years ago and it was a success, the watch is running like new.

[@davidconnelly]

This is fantastic. The best of KZbin! Loved it. Beautiful watch and super interesting restoration.

[@malachycomac5382]

It's Incredible the precision that is required to make a high caliber watch. Especially like the self winding mechanism which uses your own arm movement to trigger a pendulium to power the watch.

[@legacywatchguy8333]

Dude, you have way more guts than me. Takimg on the family watch for a total stranger scares me to death...so many things to go wrong! Well done.

[@Sasser2015]

Clicked to hear hear the scam story, but was fascinated by the disassembly and reassembly. Really beautiful piece and so satisfying to see it restored.

[@richardlincoln8438]

Wonderful work Marshall. Thank You for the time and effort You spend to share it with us. Best Wishes.

[@ricardovelez958]

The most complicated watch I’ve seen on your channel. Small yet so many pieces to it. Nicely done

[@hada7552]

Those scammers are such lowlifes. Keep up the good work Marshall!

[@stevensanders1972]

I can't tell you how therapeutic and reassuring your channel is. Keep up the great work and thanks for being a terrific person!

[@aq5426]

I love your videos, Marshall! Such a lovely watch--thank you for the work you do!

[@TUTOMIA]

Thank you, I'm so glad Marshall brought Moms watch back to her former glory. He's just so talented.

[@therealstorey]

Great video and attitude even the missed the gear and not edited out. Good Work and a joy to watch.

[@eTraxx]

I am always amazed at how precise and well made these small parts are. Wonder and more wonder.

[@prongATO]

I am one of the people that almost got scammed. I decided to verify that it was indeed Marshall by requesting a message from any of the official channels and not just email. My dad gave me my Tudor watch for my 16th birthday and I would have been devastated if someone scammed it from me.

[@richardhutchison3123]

Congratulations Denise! What a beautiful memento from your Mom and Dad!

[@TUTOMIA]

Thanks so much Richard, I've become so attached to "her". I wear her every day & it brings me great joy. Marshall did an awesome job. He's the best in my eyes.

[@ranjenmoodley1708]

I fix sewing machines.Your level of expertise is mind blowing.You are indeed a grandmaster of your craft.Love watching you work.Pardon the pun.Ranjen South Africa

[@PistonHeaven]

This has to be the most positive comment section on KZbin! Marshall! Any chance you could try and make a “Franken watch” possibly from left over parts you have?

[@chrisdavidson9431]

Another fabulous video for us all to enjoy - thank you Marshall - keep it going 👍

[@Herbf173]

Unreal work as always Marshall 👏 gorgeous watch as you said but love your passion in getting her back to glory ❤fantastic

[@TUTOMIA]

He did a beautiful job. I will always be grateful.

[@JahangirMohan]

Picked up a MAMACOO's watch as my first watch last month and I’m absolutely in love with it. Perfect size, looks elegant, very comfortable. Now my only problem is holding off from buying more watches so quickly!

[@nwvfd22]

I haven't slept in three days binging your videos and I can't get enough! It's so relaxing to listen to an expert talk about their craft in such easy to follow bite sized pieces. And your so understanding of the stories of the watch and the meaning to the person. Much respect Marshall.

[@Red22GS3]

Great video... The narration of your videos reminds of the painter Bob Ross.

[@noneofyourbusiness3286]

I own 1 watch and I’ve worn it 1 time. I have no interest in watches in any way whatsoever. Having said that, why on earth do I continue to watch this man’s videos from start to finish like I’m in a trance?

[@TylerSnyder305]

I don't really know squat about watches, I wear casio and timex. But when I was a kid I always loved looking threw the cigar boxes full of watch parts my dad had been given as a kid by a retired watchmaker neighbor who he looked up to. Beyond that I just like seeing well made built to last things put back into service and enjoy your enthusiasm for watches.

[@noelsazias]

Dear Mr Marshall, I wanted to take a moment to express my admiration for your incredible work as a high-end watch restorer. Your dedication to preserving and reviving the beauty of these timepieces is truly inspiring, and I find myself continually captivated by the craftsmanship you bring to each piece. As someone who shares a deep appreciation for the artistry behind these watches, I often wonder, what timepiece do you personally enjoy wearing? It would be fascinating to hear about your preferences and discover if there are any particular watch brands that hold a special place in your heart. Your passion for horology is evident in the meticulous restoration work you do, and I believe that your personal preferences and insights would provide a unique perspective on the world of high-end watches. Whether it's a vintage classic or a modern masterpiece, I'm eager to hear about the timepiece that speaks to you the most. Thank you for your dedication to preserving and enhancing the beauty of these remarkable watches, and I look forward to hearing more about your personal connection to this timeless world of horology. Warm regards, Noël Sazias

[@crooked-halo]

Wow, absolutely amazing, captivating videos! I become easily fascinated with things that grab my heart. One of my brothers inherited dad's Rolex. He wore it constantly & was an aircraft mechanic & pilot. I believe he got it serviced regularly in his later years. Dad's Rolex is very old but I've no idea from when or what type it is. The reason I'm so interested now is that I recently learned this Rolex was appraised at over $250,000. I was in shock when I heard this! I don't think dad had any idea, or maybe he did. How could a watch be worth that much? This was just dad's watch! Nothing special, yet it is.

[@MarkGesswein]

Absolutely AMAZING work! I'm not a watch guy by any mean, but your attention to detail and obvious patience is inspiring. How much would you say it would cost someone to invest in all the equipment you use to do these restorations?

[@AaronSchwarz42]

Thousands for the whole kit, oils, everything, like $1500 + bright lights, cameras, since having a video of the taking it apart the best reference for putting it back together, plus computers to edit the videos & all the skills & knowledge.

[@MarkGesswein]

@@AaronSchwarz42 Thank you, sir! I just found another video Marshall did where he addresses the cost of starting into this field. Might have to start small and work my way up.

[@bradysdogsanctuary]

Such a soothing voice with a beautiful video. Outstanding stuff here

[@scottcol23]

It always amazes me how someone actually designed these and made it work using nothing more than a pencil paper and an idea.

[@Zardox2]

That whole scammer thing is why i won't send my antique watch ANYWHERE. It's about 100yrs old and unless I am putting it directly into a watchmaker's hand, with a recepit in MY hand... nope. Scammers everywhere. I am sorry that Martin was wrongly accused. I am angry that a Scammer almost got Denise's heiloom watch. But I am happy that all turned out well in the end. Lovely piece!

[@TUTOMIA]

Thank you Zardox. I was completely blessed re: that, not all are as fortunate.

[@stevehogan8829]

Wow, what a story. I work for a computer security type of concern and the number of scammers out and about these days is staggering. I'm so happy that things have worked out like they have and I'm a subscriber that appreciates how you treat your followers. Thank you for being you.

[@rayg3408]

What an amazing video. Being able to film, even the smallest pieces while you scrape, the rust off is so awesome thank you for sharing this video

[@scottcol23]

You sir, are a master! I love every video you make.

[@sinivasannarayanasamy4059]

Hi Marshall Sir,just amazing watching you at work into detail from top to bottom in restoring the watches in uour hands.👌

[@birdwatcher1337]

Amazing video as always Marshall. I am a software engineer and I have always wanted to get into watch making. Is there any chance you can do an updated video of all the tools you need to service a watch? The original one is great but the links link to amazon and a lot of the listings are no longer available. If not, that's fine too!

[@savage22bolt32]

Thanks very much!! I've watched a few of your vids & am subbed. This particular episode was my favorite. I loved the way you explained so many interesting points, starting right at the beginning. P.S. And a huge thanks for not ruining it with crappy background music. Your narration as you go along is perfect.

[@blister762]

Always great when you post a new video. Too bad scammers are putting your name at risk though. Hope this guy gets what's coming to him and I dont mean a family heirloom Rolex.

[@MrTruckerf]

I have a finely finished and precision crafted German Luger I would like that scammer to look at. Well, just the polished muzzle, actually.

[@The1Perfume]

Same! Always loved Rolex since i can remember. My dad has a submariner. And it’s always been on his wrist my whole life never has he worn any other watch for the 37 years I’ve been alive.The thought of having something perfect and perfectly made is an amazing feeling especially when you don’t come from money. I bought my first OQ 17013 it was a dream come true my 17000 is being overhauled and it’s week 5!!!! Could be any week now 🤗

[@bluegizmo1983]

😳 I would NEVER be able to get all those parts back together without ending up with "leftovers" 😂

[@Caleb_son_of_God]

I got to tell you sir, I have no interest in fixing watches myself, but watching your videos is relaxing and offers a bit of catharsis from watching someone who’s good at their job and is good at communicating. Thank you for doing this.

[@JHV166]

This is the most satisfying, and relaxing channel I've ever come across. I didn't think about you having a video to refer to... Duh... That was my question... "How the heck can he remember where all those microscopic parts go?... I've been a machinist for 50 Plus years and we take videos of complex assemblies all the time... I guess I'm getting old... LOL... The only watchmaker's joke I know if is the Watchmaker who upon seeing a 4-40 tap was astonished... "I didn't know they made them that big!"..

[@goku519862]

Congratulations. You were mentioned by Adam Savage on his tested channel today.

[@canadian_american84]

Been watching you for about a year and half now and its crazy the evolution of youre learning and tools!

[@applesaucestin7248]

It's so unsatisfying that the dial can't be cleaned. It's like restoring an old car but leaving all the paint damage.

[@krisaaron5771]

I have no idea why, but your videos are soothing and so pleasant at the end of a long, hard day. I play soft New Age instrumental music in the background and as you bring function and order out of chaos everything that has been bothering me seems to melt away!

[@shockmike00]

Maybe the woman was playing 4d chess and faked the scam just to get a free restoration lmao

[@jackspratnot1972]

Gotta say, i thought the same thing

[@amandahutchison5360]

I watch your videos with total awe, there are so many tiny elements in each watch fascinating and so satisfying when you get them back to full beautiful working order

[@ohger1]

I hate freaking scammers.. Glad she got it back.

[@TUTOMIA]

I was blessed & motivated by Marshall's positive attitude. I'm sure you can imagine I was doing the ugly cry numerous times. I can't stand the scammers either. He did a BEAUTIFUL JOB! Can't wait for her to get back on my wrist. Supposed to be TODAY!

[@ohger1]

@@TUTOMIA I can see your smile from here!! Congratulations, nothing like a memento from the past. I have my grandmother's gold pocket watch she received from my grandfather on her wedding day in 1915. I'm giving it to my grandaughter when she's old enough.

[@TUTOMIA]

@@ohger1 That's wonderful. I'm sure it will have such a great sentimental value to her.

[@TUTOMIA]

I'm with you ...those rotten scammers just ruin things for so many. I had a lot of grief over this, but...I was so blessed & fortunate to have it all work out the way it did. So many don't. Thank you for your kind comment.

[@lyfandeth]

It is a true joy to see a real professional doing these jobs properly. One thing you may not be aware of, is that SctchBrite comes in 8 colors, eash a different grit equivalent, so you can really finesse things.