This guy is going to sell so many copies because he is getting very personal with his fans
@Unknown_Ooh2 жыл бұрын
MSFS is better
@chewyfoks18402 жыл бұрын
@@Unknown_Ooh Ahahahahahaha
@StefBelgium2 жыл бұрын
Yes but they still do not know how to make good clouds! 🙄🙄
@ronkramer34762 жыл бұрын
Stikes me as if he's trying to bounce off / curb... A LOT OF COMPLAINTS from his customers.. I have no such complaints with FS2020.
@void_snw2 жыл бұрын
@@ronkramer3476 (random opinion from an outsider) A LOT of people dont have any experience with airplanes but have a lot of expectations of how they should handle. that would lead to exactly what he's addressing. I've been there, as the guy with low experience high expectations, just in a different type of sim.
@CaptEirikr2 жыл бұрын
Man, the 3d math in these sims is wild, but allowing the players to see the math modeled is one of the coolest, smartest debugging tools I've ever seen a dev provide.
@DFX2KX2 жыл бұрын
X-Plane has had that toolset for quite a while, too. At leave version 9 anyway. Microsoft Flight Sim didn't until the 2020 remake. And I suspect Xplane users pointing out how handy it is was why. It's particularly useful if you want to make your own aircraft in Plane Maker.
@CyberSystemOverload Жыл бұрын
Agreed - and that its the case with ALL games. To think that what we see is kinda visual math!
@paradoxicalcat71733 ай бұрын
It's how Austin develops X-Plane. He uses the exact same tools.
@yanot802 жыл бұрын
I wish more game developers were like you Austin. As passionate, as open, as invested in their games as you are. Much respect!
@Der_Yoloist2 жыл бұрын
Software Engineer here. I appreciate your work and especially that you show Rookies how to "Debug" ^^ Thank you
@gitargr82 жыл бұрын
This is a man who is sick of answering dumb emails.
@ericlecompte2181Ай бұрын
Yeah right
@noellopez19192 жыл бұрын
Thank you for such great software Austin. As a real life pilot, my experience with X-plane (since version 8) is that it is VERY accurate compared to a real airplane once the joystick setups are adjusted. X-plane modeled by two airplanes very closely (Grumman AA5 and current airplane is Cirrus SR22T).
@matthewpage65362 жыл бұрын
It’s rare that I comment on KZbin. However, watching this video it shows the level and attention of detail LR provide making the sim as life like as possible even when users have limited equipment. I can’t even imagine the frustration you and your team share when users have the audacity to blame coding and not appreciating what they really have! As someone who has had the opportunity to fly real aircraft I can’t thank you guys enough for all you do. Your team have kept my passion alive for a fraction of the cost. I use this software to practice techniques and to aid my learning. One day I will be able to get back in the seat and continue my journey. Thank you for all you do.
@8a41jt2 жыл бұрын
Do I ever agree with you! In my case, I can't pass a Class III physical (advanced cardiovascular disease), but I once held a VFR ticket, and just like riding motorcycles, flight never gets out of your blood. X-Plane is the next best thing to actually getting in a real cockpit. What I think has happened in the sim market (thank God you guys support Linux!) is that the MS series of flt sims (I used to have a couple, when it was the only sim on the lower cost market) with its poor flight model has given some simmers an unrealistic expectation. I never saw that L deflection on takeoff in earlier MSFS versions, and not until I decided to give X-Plane a try did I notice it ... and it's real! In a real C152, you have to give it substantial R rudder on takeoff roll, for example. I still find this impressive, although not well-suited to a joystick. My IRL flight instructor was big on keeping the aircraft on the centerline, no matter what -- I can't always do that in XP, but my muscles are learning that *much* finer control skills necessary to do so. *Thanks for everything you do.* You'll never get one of those whining complaint e-mails from me about your flight model!!
@owenjc91322 жыл бұрын
@@8a41jt I'm sorry to hear that, that really sucks. But you're exactly right, when simulators are conducted in a professional manner especially a simulator like X-Plane, flying a Cessna to a 737 is pretty much true to life. If I were in your situation I'd be on simulators all the time (I'm on them all the time now) and invest all of my money into sim equipment and hardware instead of flying. It's so unfortunate to hear that but I really hope that you make a recovery and never give up on your passion for flying even if it is just on simulators.
@royalcityjazz2 жыл бұрын
YES Matthew - about getting back in the seat and continuing your journey: I hadn't landed a plane since I hung up my headset in 1996, but had X-plane(10/11) on my mac from 2008 to 2017. In mid 2019 I was right seat in a Cherokee II and the pilot asked jokingly if I wanted to try landing it at Guelph's 23, (CNC4 - look up that approach), well thanks to X-Plane I freaking nailed it. The plane owner couldn't believe it. (And candidly - neither did I haha) Thank you Austin and your brilliant piece of work X-Plane.
@jwg722 жыл бұрын
It could really do with a wind-tunnel mode in the plane-editor... a way of getting L/D ratios, stability margins, cg-positioning etc. in a controlled environment.
@mmmrqs2 жыл бұрын
Austin hear hear, please this would be a wonderful tool for people who design their own aircraft projects. I was wished for that in Plane-Maker.
@RA-gk5zg2 жыл бұрын
Yes I would pay for a different software that is more wind tunnel focused. I don’t need world scenery or mirror finishes or fancy cockpits. I just want to do testing on my design.
@ArchOfficial2 жыл бұрын
@@RA-gk5zg Invest in real professional software. You will need non-realtime CFD for that, and be warned that it will be very inaccurate.
@TankdozerCavalry2 жыл бұрын
@@ArchOfficial I have to second this. As good as this is in X-Plane, a lot of optimizations and shortcuts are probably done to keep everything running real time on a reasonable computer at home. CFD simulations do what you want. Please note that FreeCAD has OpenFOAM support and other CFD stuff as well. It should definitely be possible to do what you need to design airplane stuff. But don't rely on it for human life!
@ArchOfficial2 жыл бұрын
@@TankdozerCavalry My point is that even the best non-realtime CFD that take forever to render are pretty inaccurate. Absolutely useless for automobiles and lacking at best for aircraft although much more usable than for automobiles. The only purpose of CFD is to guide towards possible optimizations of designs, not to actually test designs. You need experimental data to have a better idea of what is going on, even for aircraft.
@Flying_Jorts2 жыл бұрын
X plane is definitely a sim for pilots. The flying feels realistic. It has its moments but hey, it’s still a game at its core. I’m really impressed that you can even program something that can replicate something so complicated. It was 50 percent or more the reason I was able to last my instrument add on. When things weren’t going my way on my check ride I relied on the training where I wasn’t burning gas.
@twifosp12 жыл бұрын
Both sims are fine. No one should be doing maneuvering physics in either and both are fine for procedures which is what you describe. I love both sims. But this fan boy one or the other is weird.
@hpharold232 жыл бұрын
XP sitll uses Blade Element theory for its flight physics calculations though. This not as accurate as msfs boundary theory and CFD. And Weather, world wide weather representation is XPs weakness.
@DC3Refom2 жыл бұрын
@@hpharold23 the CFD mfs use is not the same , high fidelity model that NASA uses it is about on par with blade element weaker in some aspects . Saying that mfs CFD( which is lower resolution has a small grid size ) is superior is ridiculous
@gozz77332 жыл бұрын
@@hpharold23 troll alert
@jumpnrun33682 жыл бұрын
@@hpharold23 Great copy and paste.
@RinksRides2 жыл бұрын
I remember x-plane on PC bout 12yrs ago.. sure has come a long way.
@mastermati7732 жыл бұрын
This is the best add for software I've ever seen. Just author explaining his behind the hood decisions while having a lot of fun.
@topilot2 жыл бұрын
I am a FAA CFIA&ME Instructor that is totally committed to training pilots using a flight simulator; X-Plane is my choice even though it is not approved for logging time. I used to work for PIC out of Essex CT and went out on my own to do 10 training assignments for pilots to get them trained for the instrument rating. We used to use the old ATC-610 Desktop Simulator that was archaic compared to what X-Plane offers today. It was even FAA Approved to log time! I have tried MS Flight Simulator and it is no doubt a strong competitor, but I like X-Plane more because I use the Apple Mac Computer. I have been watching Austin's KZbin videos lately and he just amazes me with his knowledge and expert grasp of the math he used to code X-Plane years ago. It has become so much improved, especially from what I am finding with version 12 Beta. This video he did answered some questions that I had along with many others I am sure.
@defaultytuser Жыл бұрын
I've been a Microsoft user since FS2004. For almost twenty years I stuck with it (loved it and still do, honestly) until in 2020 I upgraded my PC and saw XP11 for sale on Steam. I decided to give it a try, and after a brief adjustment period I was blown away and wished it was XP that I'd been using for the last twenty years! I have 800 hs flight time in real life (mostly turboprop) and found in XP a fidelity in flight dynamics I didn't know it existed sim-wise but was subconsciously yearning for. You've gained a committed customer here, Austin and team. Best regards!
@JoeBlac2 жыл бұрын
Can't believe it's more than 20 years since I bought my first copy of X-Plane!
@Cleared_To_Land2 жыл бұрын
Thanks Austin! I remember emailing you years ago about Helicopters and Stability Augmentation Systems, Stabilator Systems, autopilots for helicopters etc.. in particular the Black Hawk Model you had. One thing that impressed me the most with you was when you first just replied with the short answer of Google Blade Element Theory, I told you my credentials about being a reference pilot for the level D Full Flight Simulator and real world pilot of the aircraft in question. We then got into a very good discussion on aircraft systems that goes beyond just green coloured lines in order to make an aircraft feel more realistic. Especially helicopters with these systems fitted to dampen or enhance the control outputs. You listened and asked questions of me, didn't just shout me down with all your knowledge and defending code as we coders like to do. I give you a lot of credit to this day when I talk to others saying I've had this interaction with the creator of X-Plane! It's an amazing Game/Simulator, and you should be immensely proud of your achievements. The more you can do a comparison using your real aircraft VS. the sim the better. I have done many overlaid videos to prove my points that the sim does what the real aircraft does, when the non-believers pipe up! After all, that's that only way we can qualify and re-qualify a Level D Flight Simulator each 12 months by using very small tolerances in comparing data, both tabular and graphing. You did mention about incorporating some of my ideas into X-Plane 12 helicopters. I was wondering if you may be able to conduct a similar video on rotor-craft? I really enjoyed this Video. You really explained everything in a simple and fun way for even the non-pilot to understand. Well done and PEACE OUT! 🤩
@BloodSteyn2 жыл бұрын
Loved XP11, and it was fantastic with VR too. Managed to get it set up for my Dad, who was a retired pilot, to still fly around with on a modest PC I built up for him. He really loved the Glider, and I even installed the LET 410 for him, since that was one plane he flew amongst many. His mind was blown when I showed him XP11 VR one Christmas, the year before he passed away. I also showed MSFS, and let him fly around areas he used to thanks to the amazing Terrain and Graphics.... which unfortunately XP11 just couldn't do as the terrain looks, well, bland and the Autogen is terrible outside any major US or EU city. At least he had fun in both sims.
@vilemeep2 жыл бұрын
i love how happy he sounds it adds a lot
@georgefaulk25282 жыл бұрын
He's happy because he's getting idiots to buy x-plane.
@8a41jt2 жыл бұрын
Agreed! I'm jealous -- Austin *loves* his job -- that's the best life anyone could ask for!
@douggale59622 жыл бұрын
I'm surprised that you got complaints about the flight model. That is the most perfect thing in the whole thing, in my opinion.
@kwikb2 жыл бұрын
Thank you so much Austin. I was not aware of the importance of the sensitivity setting and have been having rudder control issues for ever. This morning I followed your advice on sensitivity experience and now the TBM 900 responds as expected. Perfect. Also I was unaware of CTRL M to see the force visuals. Simply awesome. Thank you so much . Would be great to see more videos like this from you!
@macbeatmaker5832 жыл бұрын
I respect this guy
@martygenska81172 жыл бұрын
While I have never tried XPlane 11 or XPlane 12, I will say I'm truly impressed with those diagnostic tools showing the effects of wind on flight surfaces. Where were you when I was in flight school learning this stuff? :) :) :)
@XPlaneOfficial2 жыл бұрын
SOMEBODY has some downloading to do - x-plane.com/try-it (it's free)
@topgunsi2 жыл бұрын
Microsoft Flight Simulator has a very advanced system and can show those same wind flow effects and being a pilot myself and own both Xplane 11 & 12 and Microsoft Flight Simulator I can say that as of the 40th anniversary update to Microsoft one, it leaves Xplane in the dust for most things even physics now which is why I stuck to Xplane so long as graphics aren't everything but Microsoft is the complete package now. Xplane has become unplayable due to constant fps issues and considering that it's far inferior in graphics just doesn't add up. I used to be a staunch supporter for x plane but I can no longer say that I am due to its old outdated tech.
@DFX2KX2 жыл бұрын
@@topgunsi MSFS is also a bandwidth hog because it has to download those world graphics. You pay dearly for it being as pretty as it is. I wouldn't say it's flight model is any better either. Not markedly WORSE like FSX was, but not better. Xplane is also easier to mod if that's your thing (like a LOT easier. Xplane connect, plane maker, etc). And it has weapons in it too as a bonus.
@Ahsan_Fazal2 жыл бұрын
I have no idea who this guy is, nor have I ever heard of X-Plane, but as an aerospace engineer, I want to point out that this guy explained and visualized a lot of the physics amazingly. Looking at the flow visualization, of course it’s not 100% accurate, but it’s definitely good enough for a game! Great job sir! 👏 Might have to give this game a try soon :)
@Ahsan_Fazal2 жыл бұрын
Especially note the downwash of the wings impacting the flow over the tail surfaces. And, of course, also the propellor downwash impacting all the lift surfaces. I wonder if he also has some sort of way of modeling the actual flow over the fuselage, or if it’s just all propellor-dependent (and the fuselage is ignored). Anyways, love to see this attention to detail from a video game developer!
@Ahsan_Fazal2 жыл бұрын
Just watched the part about trim. That proves that this guy is running a real-time longitudinal static stability model with all its elements (cg, aerodynamic center, center of lift, etc.) Extrapolating that to the third dimension often brings along huge computational cost, so I’m very curious on what kind of simplified model he used for that. Could be just a 2.5D approach, where doesn’t go full 3D and just takes the axes of the tail, wing and fuselage and calculates a matrix of force values on those… I’ve definitely found another field to explore in my free time! Haha
@ICX-0404 Жыл бұрын
X Plane is actually used by smaller Plane makers to design Aircraft. Its not a game like msfs. Its a training certified sim@@Ahsan_Fazal
@WarRior-rn4kb2 жыл бұрын
I was on the fence between buying MFS and xplane. After watching this vid, I'm going to steam and buy your game. Thank you Mr. CEO. you showed your love to your consumers.
@XPlaneOfficial2 жыл бұрын
Glad this was helpful!
@andrewmartin99952 жыл бұрын
@@XPlaneOfficial You can help Austin pay rent this month! I heard he’s been panhandling on the street after the release of Microsoft Flight Simulator.
@N172GB2 жыл бұрын
I appreciate you sharing this info with us and love your passion for flight simulation. I have X Plane 11 and now I’m fired up to get 12. Keep up the great work!
@mikeoreilly4020 Жыл бұрын
I have to sincerely apologize to you. The only previous exposure I've had of you was a couple of videos you did for XForce sims. I thought you were borderline nutty. In actuality, you're a friggin' genius. Thanks for all the hard work you've put into making X-Plane such a great simulator.
@ainsleystones46002 жыл бұрын
Thanks Austin. As a long-time X-Plane user, I think you do an incredible job. :)
@DarkSwordsman2 жыл бұрын
Can't lie: I've played Flight Simulator for years and never even gave X-Plane a chance. Simply seeing all of the data diagnostics and other features (plus the beautiful graphics at 60 FPS) you showed off here makes me really excited to try out X-Plane at some point.
@basam20184 ай бұрын
Awesome! Love hearing you explain it! makes me happy! makes me appreciate this program more than ever before! Excited to fly again! Thank you for writing this software! Much appreciated!
@normg22422 жыл бұрын
I know, this doesn't say much about my intelligence, but as a non - pilot I always thought 100% on the sensitivity slider equals 100 % realism and 0% means total arcade for beginners. But hey, I'm just a little idiot who doesn't know a thing about programming. But in all honesty, you have my greatest respect for putting together such an awesome simulator. I can't even begin to imagine what it takes to successfully compete with Microsoft over all these years. Keep it up!
@paulphibbs71622 жыл бұрын
Austin, you’ve created a beautiful tool to analyze this information. All the best mate.
@m369.0jz2 ай бұрын
Used to be a huge msfs user till my brother-in-law should me xplane 12 that he uses for flight practice. Switched to xplane 12 and will never go back. Ya the gfx don't compare at all but the physics of the planes life when you wake it up on the runway is way better then ms could ever even try to be. Thank you for your hard work on a great product!.. Oh ya, were working on a sim room using this. Got some what of a pro sim with 2 seats, already used xplane to practice run Armstrong international to lax. 😊
@hmbpnz2 жыл бұрын
Love X-Plane, love this, you're clearly very passionate. Bring on the MSFS fanbois.
@EricWestphal2 жыл бұрын
Wow, this was an awesome demo (3500 hour pilot here with only a little sim experience). Thanks! Going to have to play around with this a LOT more.
@wololo1011 ай бұрын
I'm starting to really like xplane watching his videos and I've never even played the game/sim
@ScoobyMoony Жыл бұрын
hello xplane how can i add grass vegetation textures. Sadly you guys didn't add that into the xplane 12 but i can understand how long it takes
@AmauryChihuahua11 ай бұрын
Ortho4xp
@jhonjhon17402 жыл бұрын
Hey Austin, Just curious what ac are you using?
@freedomofflight31382 жыл бұрын
Austin really had enough of all of y'all questions lmao
@Feakre2 жыл бұрын
Anyone who says the nose shouldn't come up when you extend the flaps shouldn't be flying an aircraft.
@ivaniuk123 Жыл бұрын
When I was a kid (10) I didn't know anything about P factor and I thought the joystick I had was broken because the airplane kept pulling left on take off lol.
@jadams3427 Жыл бұрын
Thank you Austin. I have been with X-Plane since v6. In those days and many years since, you have been so accessible to us when we needed help. Now, there must be too many of us to have such individual help, and KZbin give such a good way to continue with your help. I have been simulating real aircraft in X-Plane for years. Mostly, these have been the BAe Hawk, and the Flitzer series biplanes designed by Lynn Williams. The simulation benchmarks well with reality, as long as we make the airfoil files as accurate as possible, for a good range of Reynolds numbers. All other details just have to be exactly as the real thing, and we just get 95% reality sitting at our desk ! I have X-Plane 11 now, and have not used it for a while. I would like to see some additional parameters in Plane Maker:- 1. Having some approximation of effect on highly swept leading edges. 2. More drag simulation. Interference drag and parasitic drag, perhaps? Could we have some way of predicting Cd of nacelle shape. 3. Could we have some kind of control on turbine RPM vs thrust? Right now it seems to be linear. In reality, turbines make their most of their thrust only at high RPM.
@petergregorypottery54762 жыл бұрын
Hi Austin, Thank you for giving the tools for solving problems, rather than just giving answers. It is fascinating to get a view of what goes on "under the surface" in X plane, and a real privilege and joy to have a virtual wind tunnel on our desktop. I'm looking forward to doing more with Plane Maker. How the Wright Brothers would have marvelled at such a wonderful thing! I'm really enjoying X plane 12, it is a very much appreciated step forward from version 11. One of my favourite relaxations and challenges is to go cross country in the glider, and this really comes to life with the way you have developed the weather, complete with thermals, turbulence, slope lift and so on.... and I confess to being addicted to taking many sunset pictures as the lighting is really beautiful! Thank you so much!
@Wolf-65675 ай бұрын
Because of your flight model in X-plane 12, better realism in flight, and the planes appearance, compared to others, and with better lighting AND ESECIALLY because of your passion and honesty-- I have just got X-Plane 12. ( I have used AutoOrtho and SimHeaven).. After X-plane 11, 12 is a huge upgrade with the realistic flights and enjoyment.. I am really really happy with X-plane 12- brilliant thank you... keep making awesome Austin !!!!!!
@TheToppestGee5 ай бұрын
I’m getting x plane 12 in a week and I’m playing on Mac so there kind of isn’t many options 😅 And I’m also convinced that it should run pretty realistically, but unfortunately without satellite imagery
@purplepenguin432 жыл бұрын
Anti Meme: "You say diagnostic techniques, I say learning tools, we are the same."
@kellytime302 жыл бұрын
Austin, your sim looks amazing and smooth.
@eknuds6 ай бұрын
A little, light airplane with a powerful turbo prop has strong left yawing tendencies. Shocked!
@TheToppestGee5 ай бұрын
Yeah I know I had some experience in sim flying and light plane with big fat turboprop strapped to it leads into some unwanted yaw taking off😂
@toddwasson33552 жыл бұрын
On the "yaw left" under power: This is one of the things that annoys me about most of the flight sims I've run. I've been a racing sim developer (physics engine programmer, vehicle dynamics engineering among other things) for 20+ years. Most flight sims don't handle ground vehicle dynamics well. The discussion of the aero forces and resulting yaw moment from the prop induced airflow is great, but what is almost completely missed is the counteracting effect of the tires. A yaw moment to the left from the prop flow will induce a slip angle (like angle of attack but in the horizontal plane instead of vertical) in the tires. Tire forces grow with slip angle. With two rear tires behind the CG and one front tire ahead of it, the tires will create a yaw moment back to the right which reduces the left yaw acceleration. It doesn't cancel the net leftward yaw moment completely (slip angle must still develop for tire forces to exist to do anything), but it should counteract it to a large extent. In the video the leftward tire forces are visible, but there's no way of knowing how close that is to reality. It leaves me wondering what the tire model in XPlane and other sims look like and how the cornering stiffnesses and peak lateral force slip angles were tuned, if it's even modeling that at all. Many aircraft simulators use extremely simplified tire models tuned by aircraft people with little understanding of ground vehicle dynamics, and as a result are notoriously bad at ground transit simulation. What I suggest Austin looks at are the cornering stiffness of the tires and their yaw moment contribution as a function of slip angle relative to the prop wash induced left yaw moment. In particular I'd recommend doing some constrained testing (in sim). Force the aircraft path along the ground to a constant velocity with a constrained force, twist the aircraft to various slip angles with a constrained yaw moment, then observe the yaw moment contribution from BOTH the prop and the tires. Then tweak cornering stiffness in the tires (relative front and rear ratio is important here) and observe the effect on the overall non-constrained yaw moment. If the yaw moment is greater than it is in reality, then the sim aircraft will have a yaw acceleration to the left that's higher than the real plane's. I think what you'll find is if you give the front tire a very low cornering stiffness and much higher in the rear, the leftward yaw acceleration will be significantly reduced and probably be more in line with a real aircraft while on the ground. What this means is you can reduce the leftward yaw acceleration (I suspect significantly from my experience simulating cars) through careful tuning of tires. Real aircraft design engineers do this, it's part of the tire design process. In the sim, it's not THAT the plane veers to the left that's suspect, it's how strongly it does so. I'm not a pilot myself, but have flown in single engine prop planes with friends who are, and while there's a little pull to the left, it doesn't seem to be anywhere near as strong as it is in sims. One friend with a Piper didn't touch the pedals at all during takeoff from what I could see. My guess is because the tires are very different from what the flight sims often have. If there's any steer compliance in the front wheel, that'll effect it too. It's no surprise really if/when flight sims have trouble in this area, ground vehicle engineering is quite different. We're generally looking at different things from the flight sim people.
@thromboid2 жыл бұрын
I wonder if Austin's work on X-Auto (basically X-Plane for land vehicles, which I believe was never released) fed back usefully into X-Plane's ground behaviour..
@toddwasson33552 жыл бұрын
@@thromboid The fact that he never finished it and released something suggests probably not much. Land vehicles with tires, differentials, suspension geometry and all that are a heck of a lot harder to simulate than planes. I'm impressed with what he's done with XPlane but think he's missing some things in the ground vehicle department still. Ground vehicle dynamics is an entire field in itself. Most flight sim folks are completely unaware of most of it.
@kalidilerious2 жыл бұрын
This is very informative hearing this right from the developer
@d.porter31422 жыл бұрын
XPlane has fairly good physics, but what it and other flight sims have never been able to accurately simulate is positive dynamic stability. I.e., most planes seek stability when trimmed properly and you can take your hands off the controls, but in all the sims the planes continue to roll or pitch even when the controls are neutralized. And yes, I adjust dead zones, offsets, sensitivity settings, curves, etc.
@BeechHouse2 жыл бұрын
I learned to fly in a Cessna 172. I can tell you first hand, your job of flying the plane doesn't end when it is properly trimmed. It requires constant input even if it's perfectly trimmed. The control forces required to do so are at their minimum in a properly trimmed aircraft but they are still required.
@d.porter31422 жыл бұрын
@@BeechHouse I learned to fly in a T-38 and have flown the F-15, F-16, and many GA airplanes, and I can tell you a properly trimmed aircraft does not require constant input.
@chesthairascot37432 жыл бұрын
It makes me so happy that the creator of XPlane has a legit pilot's mustache. This explains so much. Also, as a firmware engineer, I respect your calibrated level of saltiness.
@SimUKReviews2 жыл бұрын
Could you please explain why you won't implement persistent airplanes? I'd like to see damage if I deploy flaps too early, and for that damage to be retained for my next flight until I repair it.
@SASimulator2 жыл бұрын
This is so Educational. Thank you Sir
@ezequielmatiasford14312 жыл бұрын
Excelent explanation Austin!! X-Plane for me, is the best FS developed ever.
@majesticskiesgaming9 ай бұрын
I love that Xplane allows you to do this however this feature doesnt work in replay mode where you're usually going to want to use it. Would be great if that feature could be implemented going forward :)
@Greazer2 жыл бұрын
Hey Austin, got a question. Will you be doing a video review of Microsoft Flight Simulator 2020?
@tomstravels5202 жыл бұрын
Why would he do that? Unless it was to compare what they get wrong
@Eduardo-sq7sp7 ай бұрын
THANKS! What a generous explanation for SXXI simmers. All this effort to create a beauty and all this effort to EXPLAIN to people that can´t be as patient and worker as you, Austin. Hug from Madrid, Eduardo simmer since 80's.
@stvnnmnn2 жыл бұрын
So, the answer to why this particular plane in the sim is so wonky is that the default settings of joystick sensitivity are wrong for this one. Thanks!
@jaromirandel5432 жыл бұрын
17:00 - The non-linearity is important for sticks like Logitech Extreme 3D pro. In real aircraft the stich is usually much much longer which provides much better precission. Like 2cm movement of your stick causes 10 cm movement of in-game stick. It is important specially for helicopters.
@8a41jt2 жыл бұрын
Thrustmaster Hotas is similarly affected. I stopped simming rotary wing aircraft just for that reason, my hands are full with fixed wing aircraft 🙂
@NebulaM572 жыл бұрын
Austin, this was outstanding! A lot of great info here. I knew X-Plane was king but I had no idea of all these features. I don't usually have any issues flying but I look forward to rolling thru these diags just to learn more about them. I very much like seeing how all these options work, the before and after effects along with them. And who better to learn them from! I hope you're able to make more of these kinds of videos! Learning about the guts of X-Plane is very exciting! And I love your energy here. I know you're busy. Thank you for taking the time to do this. It's huge!!
@danburns61662 жыл бұрын
It is always insightful to learn from someone that both knows and loves what they create. Thank you, Sir!
@patrickhauser6312 жыл бұрын
This is a fantastic video! I've used X-Plane for years but never dived into the diagnostic features much. This really illustrates the level of realism that has been programmed into the flight model. As a programmer myself (mostly business IT stuff), I'm truly impressed with the sheer number of calculations that must be happening to make the flight model so accurate. Amazing stuff!
@cleverlyblonde4 ай бұрын
Since I am not a pilot, I have to admit I use FS2020. That said, this was actually an awesome physics lesson even for a non-pilot and I learnt a lot. I also think its great that there is competition of course. I can definitely understand why X Plane has its fans. Very enthusiastic explanation by the lead dev 👌
@N.A._McBee11 ай бұрын
The by far best, most informative, most valuable video I've seen for a very long time! (If someone's interested in aviation, of course.) I to see X-Plane from a whole new perspective now, there's so much to learn, I'm stunned! Thanks an awful lot for sharing all these information!
@MarcusGarfunkel2 жыл бұрын
Wow, someone give this programmer a hug
@Radiosabines2 жыл бұрын
Brilliants explanations, thx M. Austin , push the Sim to the Top Level
@marcogil50922 жыл бұрын
In summary: "Stop breaking my balls you noobs, learn to fly". Love it
@4005Player2 жыл бұрын
Gyroscopic precession, P-factor, spiraling slipstream, torque = 4 factors that cause left turning tendencies in single engine prop planes. Excellent video! X-Plane rocks!!
@@alergicgamer2711 propeller driven airplanes are real planes not just props!
@alergicgamer27112 жыл бұрын
@@justcommenting4981 now, I really don't know if it's a troll or not
@victor-emmanuel74852 жыл бұрын
how are thermals, ridge lift and wave modelled in Xplane? I would imagine after watching this video that it is a great sim for simulating gliders! Great video 👍
@DFX2KX2 жыл бұрын
They are modeled to some extent in 10 (the only version I have, sans the 9 Demo somewhere) and I believe they got more modelling in 11 and the still-in-development 12. I remember catching a few thermals by accident while playing with a powered glider I made in Plane Maker and going 'oh, hey, thermal!' because I didn't know that was a thing in the sim.
@lostbeats33122 жыл бұрын
before the video started i knew its going to be about wind and torbulences :D nice explenation
@insanterbang2 жыл бұрын
Or you guys can take Private Pilot License in some flying school then you can appreciate what X-Plane is
@BloodSteyn2 жыл бұрын
Or you can learn from the MSFS flight school series too. But yeah, gamers need to understand the physics behind flight. My Dad, who was a lifelong Aviator, had fun asking his students, "What happens when you pull back on the stick" ... "The nose goes up...?" Dad, "No, the Tail goes DOWN...points the nose up... then the nose pulls you up."
@Bloblobloblown2 жыл бұрын
your team did a great job...Only missing now is photogrametry service, and use sattelite textures for the ground. You know something like Oscar developed with Ortho4Xplane...Now I have a doubt, Ive installed the Demo of Xplane 12 and when in the air when I move the controls appears like a glitering shining sparkling things in its edges surfaces, sometimes before condensation. Im not sure if that is from Xplane or is my laptop which already presented me some graphics failures. making the clouds look like oil painting
@triskellian2 жыл бұрын
I've seen the same shimmering artifacts on the leading edges of flying surfaces and sometimes other surfaces. These became apparent a little while back. I have a gaming desktop with decent graphics capability( just 6 months old). I made some adjustments such as tuning down the level of detail on the graphics settings. I purchased the early release of X-Plane 12. I noticed also that after incremental updates, some anomalies are reduced and sometimes new ones pop up. At any rate, this seems typical of beta releases.
@Bloblobloblown2 жыл бұрын
@@triskellian Oh so its Xplane issue, cause I had some issues with MSFS2020 as well, check my channel and see the last videos Ive uploaded, those are some of the bugs I believe my GPU is making.
@skyeparker58222 жыл бұрын
You sir are an absolute legend.
@lyianx Жыл бұрын
soo TL:DW - Its the sim isnt coded wrong. Its coded Accurately. Guess this is why i see pilots and 'training sims' using X-plane over MSFS. Granted, the New MSFS *looks* very good, with its geo-mapping and such.
@DutchThackers2 жыл бұрын
This is an excellent video and really highlights a problem in flight Sims now that it's attracting a wider audience. Whilst this is great, we are getting more people into flight Sims and as a consequence, we now have a lot of users complaining about things that are real. An excellent example is the implication of helicopters in msfs. So many people complaining they are so difficult to fly. Haha. Its because they are and it takes skill to fly these naturally unstable aircraft. Xplane is very sophisticated as is dcs (and msfs is getting there) and users who are not pilots in real life need to spend the time to learn how to fly. That's what simulators are for!!!
@triskellian2 жыл бұрын
I've flown both Microsoft and X- Plane for many years and the comparison to real life flying is interesting to say the least! My first flight sim was IFR for the Vic 20 which featured a Cessna 172 RG. There were no outside views much less moving scenery outside the windows. At the time, I wasn't a private pilot. After many decades of flying light aircraft, the new simulators are pretty close to what one could expect for aircraft control. As an inexpensive tool, I enjoy X Plane's ability to mimic avionics functions( mostly) and have pretty good representations of flight charts. Microsoft is pretty good at attractive visuals. The thing I like the most about current sims are that some users can offer interesting crafted models and add-ons!
@eklhaft45312 жыл бұрын
I have never played X-plane (except the one time I installed it and found my computer couldn't handle it). This however is insanely cool. I would probably do it even when I don't have a problem just to see how the air is blowing around the aircraft. It could be a very useful tool for students to visualize all the phenomena like p-factor, engine torque etc.
@CyberSystemOverload Жыл бұрын
Austin is a fantastic educator. The way he explains these topics with such enthusiasm. Im glad I bought XP9/10/11/12 to give my support!
@andrewmartin99952 жыл бұрын
After this video, I’m sure Austin went right back to playing Microsoft Flight Simulator.
@argduck2 жыл бұрын
Ye shure i hope he does because this is just garbage and its alwqys a good idea to basics say that half of the community are dumb and the other half don't understand the sim Xp12 is more like xp11,5 and when you compare xp11 with xp10 u don't really see a difference. The biggest Problem with XP is that its Stuck in the past. But tech moved on and since mfs came around XP is obsolet and this idiot trys to Cover that up. There is no fucking way that a plane basicly drifts off the runway in normal weiter comditions ive flown a Cessna 182 a piper and even a tbm in real live no they don't do that yes they steer to the left/right but not in a tokio-drift way
@majoraviatior1611 Жыл бұрын
True
@EeekiE2 жыл бұрын
Love this guy’s passion
@kb0372 жыл бұрын
Hello from Iowa State!
@thatguy70852 жыл бұрын
I think I remember you taping yarn to your plane when doing airflow testing to program the sim better.
@Mike-pn3eg2 жыл бұрын
Alright! Now you have gone and done it Austin! You have to make the slipstream data RGB scriptable now!
@hedleyfurio7 ай бұрын
On a few low wing ( real) planes , when I lower flaps the nose pitches down vs on high wing nose pitches up due to couple . I just did adjustments in plane maker to emulate this .
@LordPente2 жыл бұрын
So, I saw this, and thought about a plane design I was working on. Can you take a 3D model of a plane, and drop it in? Subscribed. You have my attention.
@Bassmunchkin1 Жыл бұрын
Hi I have a MacBook Air M1 and I'm using my keyboard as I've just started today, but I cannot find out how to steer with the keyboard, would you know which keys I use to steer with please
@raisin392 жыл бұрын
How do I shut off the luminous green controls. Everything is green. Thanks for the help.
@jaromirandel5432 жыл бұрын
Note: This video is not just about X-plane. It is quite universal for any flight simulator.
@ronsflightsimlab95122 жыл бұрын
I don't know of any simulator that models physics like X-Plane 12, using Blade Element Theory that effectively.
@jaromirandel5432 жыл бұрын
@@ronsflightsimlab9512 DCS:World, MSFS 2020 (shame they did start to use that 25 years after X-plane)
@Tsudico2 жыл бұрын
@@jaromirandel543 I have seen MSFS videos showing some data like this (when talking about using CFD), but was that developer exclusive or can users access the information for themselves in flight?
@getsideways72572 жыл бұрын
@@jaromirandel543 What do you mean "after X-Plane"? Austin hasn't even realized yet there is such a thing as Navier-Stokes equations. Although, maybe he has already - I haven't watched this video yet - but BET is nowhere close to what the guys at Asobo did program for the flight model in MFS. Sadly, it's rather low resolution, but that's mostly the problem of our current hardware (and of more robust CFD optimization methods not being discovered yet). Austin's physics knowledge is on the level of a high school student (a high school teacher at best), while the guy that works on the flight model at Asobo is an aerospace engineer. Do I need to spell the difference?
@gpapa312 жыл бұрын
@@getsideways7257 Seb is an Aerospace Engineer?
@ronnieklatt3 ай бұрын
How can I turn on the flight path marker in the Garmin screens?
@AllenPortman7 ай бұрын
Very interest information! I have never been able to fly the stock Lancaire due to extreme erratic movement both trying to taxi and flying, so I am going to see what the sensitivity settings are on that plane!
@poparab2 жыл бұрын
when i fly a airplane, i take the control. Not the simulator
@GamerMuscleVideos2 жыл бұрын
To be honest the most effective solution to the issue of people being confused / asking same questions / incorrectly blaming physics , is more about having a much more clear UX and user interface design and better device configuration and calibration wizards. Not that a video like this is bad or doesn't help , but the type of people that get stuck on many of these issues are the type of people that need a hand held tutorial section to a game. Having all this sort of stuff in a in game tutorial also adds a ton of value to a game and sim as it's enjoyable single player and fun educational content for people that don't know general aspects of flight arodynamics or even know to what degree xp11 is realistic / what it simulates. At the same time some people simply don't have the capacity to understand certain things and some people will always fire of an email rather than giving things a Google or checking KZbin first 🤣 I'd rather rub sand in my eyes than be a game developer 😆
@brandontal30762 жыл бұрын
How do I use the toe brakes with a joystick like he’s using? I set my trigger button to hold maximum brakes and always uses the parking brake. How do I said the trigger to both toe brakes?
@triskellian2 жыл бұрын
You may want to try "toggle brakes / regular effort" button assignment. I found that it works similar to the actual brakes in a light plane. Also, the "b" key on the key board is good for toggling the parking brake. This took a bit of trial and effort, by the way!
@ToumalRakesh2 жыл бұрын
I think one of the problems is that a lot of people are coming from a certain other competing product, and believe that the competing product is the "most realistic" flight simulator ever made. Telling people to turn on the visualization is a good move - not only does it give people a chance to see what's going on, but they can also find out just how much is going on under the hood in X-Plane vs. some of the more graphics-focused competition.
@lukasausen2 жыл бұрын
not that the competition is bad by the way, in the end people also want to have fun and see nice views while flying a plane even tho its simpler, in the end i have a lot of simulators because no mather my mood in the day i can always have fun flying what i want the way i want, not like in real life where you have much more limitations, time being the biggest.
@JimK0QJCАй бұрын
X-Plane the best sim and an educational tool. Thanks austin
@GabbieGirl0072 жыл бұрын
seeing that micro burst visual really wowed me . this is the of many peices of evidence that x plane is seriously the best flight sim . in terms of realism it means busniess . you also gotta love how happy and chipper austin sounds . this man is my insparation.
@brax23642 жыл бұрын
I use X-Plane to practice reall-world flying. I have X-plane equipped with the same avionics as in my real world airplane using Real Sim Gear GNS 430, GNS 530, two G5s, auto pilot and comm panel and configured with Foreflight and displaying approach plates on my mini iPad just like the real world. I use X-Plane mainly to practice IFR flights and approaches down to minimums in low IFR conditions. So, if I’m scheduled to fly with an instructor to shoot approaches I can prepare for them on my sim at home. Saves me a lot of $. If I screw up an approach or screw up going missed, or whatever I can re-create the scenario at home and get it right. My home sim with X-plane is better than the FAA approved sims I’ve flown. So, for me it is not a game and IMO opinion that is the difference between X-Plane and MSFS. Microsoft’s flight sim to me is more of a game than a flying tool. I’m very much looking foreward to X-12 just as soon as I build a new high-end computer that can accommodate the frame rates I’ll need.
@GreenNeonLine2 жыл бұрын
I started with X-Plane and moved to MSFS on xbox because it was easier than getting a PC. Anyway these tips can help with any of the good sims if someone is having problems. Awesome informative video.
@mcros72 жыл бұрын
Outstanding X-Plane tutorial! Really appreciate your effort Austin to do these teaching videos. I've been a pilot for nearly 50 years and continue to learn from your videos.
@stevenclark21882 жыл бұрын
I'm assuming the nonlinear controls are kinda 'Controller Mode'?
@iiaf_museum2 жыл бұрын
Please add the Mooney M20J MSE
@mercster2 жыл бұрын
Hah, always love a video from Austin... a true Rennaissance man!
@mercster2 жыл бұрын
TEACHER, TEACHER, I KNOW WHY THE PLANE IS PULLING TO THE LEFT! (I'm being that annoying kid... I know this part of the video was intended for me 😉)
@Thefreakyfreek2 жыл бұрын
I was looking in to a new fligt simulator so i had the option between xplane or Microsoft I have ways been a Microsoft flight fan but i happy that i choose xplane even tho it looks not as good