Very lovely build. Pretty nice performance for such a low spring load and short barrels. I've pushed my personal build up past 280fps now, so still alot of room to work with for anyone else interested in buying the files and pushing the pedal to the metal.
@Supercollidr2 ай бұрын
Love your work Radioactive. What spring setup are you using with your skeleton reflex now?
@radioactivesdesigns35542 ай бұрын
@Supercollidr I got a cut down 16kg fate spring, and a thin metal plate epoxied to the original spring rest area.
@arenhansen625 Жыл бұрын
I have had this kit sitting in my bin for 16 months.... this motivates me!
@MongooseJakeNerf Жыл бұрын
You'll have to get a build going!
@ArsontAngelfire Жыл бұрын
That's such a cool build, and a really sick paint job! Love it all.
@MongooseJakeNerf Жыл бұрын
Thanks, glad you liked it!
@CRNerf Жыл бұрын
Love everything about this. Thank you for sharing it. Take care.
@MongooseJakeNerf Жыл бұрын
Thanks CR!
@cheesy_cookie Жыл бұрын
Wow! I didn't know that kind of performance was possible with a reflex 6!
@MongooseJakeNerf Жыл бұрын
Just look at what Tripp does with his, he typically pushes the upper limit when he does builds. I tend to go for a good power but also remain usable in local games that are 150 capped, or some from further away that are 200 capped.
@bz4701 Жыл бұрын
Legendary!
@MongooseJakeNerf Жыл бұрын
Glad you liked it!
@Matt-md5yt Жыл бұрын
sweet build bud
@MongooseJakeNerf Жыл бұрын
Thanks!
@allencarey7336 Жыл бұрын
I modded 2 of these with cut down rival springs and ohhh my gosh they were hitting about 120 fps...problem came after playing with them for a while the cylinders actually broke because the spring was too heavy
@MongooseJakeNerf Жыл бұрын
There's a quick fix for that, I actually had made a video on it as well: kzbin.info/www/bejne/oX-Xf2h-j7aXfrM
@ArTchN_Ei8ht_Industries Жыл бұрын
Hey Jake. Hope you've been well. The cylinder on my Reflex 6 broke off from the lone screw post that holds the front of the cylinder to its back part. I'd upgrade to higher capacity and performance from RadioActiveDesigns but my printer is still not functioning and the disposable fund is empty at the moment. Are the 1st Gen Yellow or Bug Shot cylinders interchangeable with my White/Blue Reflex 6? Also, can the springs from the aforementioned blasters be nestled within each other to double up the power output? I hope the transplants work. Thanks in advance. Stay safe and blessed. Yosh...
@MongooseJakeNerf Жыл бұрын
I have been managing, and hope you're well. I actually did a video on repairing the stock cylinders as they can be salvaged with mainly some two-part epoxy and a longer screw if you want more security. As for the cylinder swap, I honestly have never tried to interchange them. Nerf Strongarm springs work really well with the Reflex, including nesting with the stock spring.
@ryanengelstad6073 Жыл бұрын
Super cool
@MongooseJakeNerf Жыл бұрын
Thanks Ryan!
@rodneydavidson8288 ай бұрын
Can you modify this to be a slam fire?
@MongooseJakeNerf8 ай бұрын
Technically you already could... Just hold the trigger and pull the priming bar and then release. But you'd have horrific accuracy, lol.
@ScanderiteMagnoliaGalaxyPG3D Жыл бұрын
my Nerf guns are Unmodified i don't modify them
@MongooseJakeNerf Жыл бұрын
Time to give it a try and start tinkering!
@ScanderiteMagnoliaGalaxyPG3D Жыл бұрын
@@MongooseJakeNerf i don't know how to mod them i don't have the third party mod kit for them
@MongooseJakeNerf Жыл бұрын
@@ScanderiteMagnoliaGalaxyPG3D I've personally put lots of mod guides on tons of blasters on my channel over the years, many not requiring kits at all. The Reflex itself is one of those, you can mod it for dirt cheap with just a spring needed, and maybe a bit of brass if you really want.