X32 Live! Webinar: X32 with the S16

Our product specialists, Joe Sanborn and John DiNicola are back with a new Webinar that covers the X32 Digital Mixer's functionality with the S16 Digital Snake. Topics covered include ethernet connections, configuration, and Q&A.
For more information on the S16 Digital Snake: bit.ly/woOJz2
For more information on the X32 Digital Mixer: bit.ly/fa1tK2
Winner of the MIPA 2013 "Best Live Mixing Desk" Award! bit.ly/17EXiUx

[@CRothgeb]

Any word yet on interoperability with the Midas M32 and DL16?

[@DARKINxGIFT3]

You can bring additional channels in on the Aux channels. Two limitations I know of with doing this are; you can only bring in four channels, and there are no dynamics for those channels. Under routing set the input patch for Aux 1-4 to AES50. Perhaps another way to utilize the extra channels in the third S16 is to have different input patches for different scenes, Band A uses x channels band B uses another set of channels.

[@realsoundssoundsystem4733]

hi can you tell me how too config the too x3 behringer with the 2 S16 1 x32 for stage monitor mix & 1 x32 for foh thanks

[@mateyko555]

What about latency in those setups?

[@VigilanteLive]

I'm having trouble with my 2 behringer x32 and 2 behringer s16 this is what i'm doing i connected both heads to the monitor console then from the monitor console send the cat5 to the foh console. so i have signals going into both of them the only thing i don't have is the sends from the foh console only the monitor console which i don't want i want to be able to send from the foh console. help please

[@mdw45]

If I use three S16's, 40 inputs, which input faders on the X32 will control the extra eight channels?

[@jdinicola32]

You can accomplish a digital split via CAT5 a few ways. 1. With No S16s: Connect Mics to Monitor Console and CAT5 to FOH. 2. Connect S16s to Monitor Console, then connect Monitor Console to FOH (Mic Gain at MON position). 3. Connect S16s to FOH Console, then connect FOH to Monitor Console (Mic Gain at FOH position). The routing will be different for each option, as highlighted in the Webinar. Post here if you have more questions. Best, John DiNicola MUSIC Group BEHRINGER

[@TheWinndizzle]

So it is possible to come out of the AES50B of the FOH and then go to the AES50A of another X32 console or X32 rack etc and use that second X32 as a broadcast mix? If so how do I route the signals from the X32 FOH AES50 B to the AES50 A of the broadcast/monitor rack?

[@tosinmakinde4493]

how do you use x32 for FOH and monitor with cat5?

[@ferlewis7194]

hello can join 2 behringer x32 link for 64 Mixes Live? is there any way to get 64 channels with x32 s16 plus 4?

[@RobertoLicardie]

Could you refer me to a site or tutorial on How to route my whole PA, and Monitor (bus 1-8) system through the cat5, so i can take it from the backstage... From the s16, to the PA amps as well as the monitors.

[@TioSam.880]

Esta buena la consolona!!!!

[@RobertoLicardie]

Simon, aqui biendo como conectar la consola a una medusa digital.

[@TioSam.880]

Nítido y después le podes conectar el protools para grabar todos los cabales en vivo!!