Xbox 360 Repair Horror Stories

Today we're looking back at some of the early days of the Xbox 360 Red Ring when people were scrambling to try to fix their console and rumors were flying around the internet. These are all mods I would come across in different repairs that I experienced over the course of several years.
Check out the Spawncast Network: spawncastnetwork.com
Twitter: @SpawnWaveMedia
Threads: www.threads.net/@spawnwaveyt
Spawncast Jerseys: bit.ly/3sZKrgj
Spawncast Spotify: open.spotify.com/show/41qKKRu...
News Wave edited by: / @kimerexprojekt
Second Channel: / @spawnwaveplus6991
Spawn Wave Merch: teespring.com/stores/spawnwav...
Follow Us On Twitch: / spawnwavemedia
Listen To Our Weekly Podcast: / spawn-wave
Like Comment and Subscribe!
Thanks for watching!
#Xbox #Xbox360 #Microsoft

[@cayder7485]

The 360 will live forever as long as it doesn’t get a red ring

[@ramrodbldm9876]

I just turned mine on last week after a few years and right away the red ring popped up. 😂

[@xrchiveunlimited]

I’m praying that my 2007 arcade model doesn’t have this issue

[@steakcrust558]

Ah yes it lives forever if it doesnt die

[@ThePhil-Osopher]

@@bornslippy2023I haven’t really seen a widespread issue like this at all.

[@RocketRenton]

@@ramrodbldm9876

[@OldMan_PJ]

The BestBuy extended warranty was the best thing ever for the RROD, not only did they replace the console but they replaced it with the latest model available. I ended up getting 3 replacements and finally ended up with an Elite console that didn't Red Ring.

[@JeskidoYT]

and now only that has folded onto Geeksquad warranty

[@FintanMoloney]

That's awesome !

[@capcomfan82]

Bestbuy has the best warranties for everything. I did the exact same. I ended up getting the last elite series with the new chip set before they refreshed the console.

[@Sauceyjames]

I had a best buy warranty for a PS3 and got a newer system with a game and $100 back from it, best $30 I've spent.

[@bradnoyes7955]

Hmm, My Elite console did RROD so I sent it in to MS for warranty repair, and it RROD again a decade later.

[@nicklassjomann2080]

I worked in ms xbox support back in 2009/2010. The amount of crying/sad teens/grown ups who called me with rrod was huge.. but we were instructed to never agree that xbox is a poorly designed console with flaws, but to read the script instead..and issue post labels to the customer, if their xbox was eligible for repairs.

[@Yofu]

I did the towel trick to finish ODST because my 360 died overnight between sessions, lol. Finished playing, went to sleep, next day turn my 360 on to be greeted to the red ring. Got the job done to finish the game but yeah, very temporary fix. Less than 24 hours later it was dead again. That was my 3rd 360, so I didn't even bother shipping it back. A year later I got the Reach edition 360S and it's still trucking.

[@RocketRenton]

Slims are much better but do still have there own issues, they are mainly the ones that people now RGH.

[@colesyaj_tech]

So the actual cause for the RROD, is the seal between the Substrate and dies, also called TG. Early RROD GPUs had a Low TG that would get soft at 70C allowing the GPU to bend and break those connections. When they figured it out, they started making fixed Xbox 360 Versions known as Late Falcons, Jaspers and Tonaskets. Older models also could have a fixed GPU if they were sent to repair back then in 2008.

[@undefinednan7096]

The material is called underfill, which is a special sort of epoxy. TG means temperature of glassification, which is very relevant -- the defective GPU models used low TG underfill. Just as a note, the fixed GPU models were introduced in March 2008, so any xbox 360 repaired after March 2008 or made after ~May 2008 won't have a defective GPU.

[@xCaliKid96]

I remember I was so terrified to get the red ring. The moment I got it, I disconnected everything immediately and stopped playing my Xbox for a week. After a week, I turned on my Xbox and the red ring was gone. It never happened again lol

[@RocketRenton]

Wow you were very lucky.

[@JessicaFEREM]

I mean it was possible you got a non-threatening red ring, like a disconnected video cable will cause a red ring, stuff like that.

[@modermonkula]

I got 2 red ring consoles, both went back in coffins both came back working though. Was one of those "It won't even happen to me things" until it did. Slim version was faultless through

[@austinthegamer100]

I had a bad harddrive on a 06 model. Only time I ever saw a red ring in real life.

[@JamieStuff]

We were fortunate with our 360. (Toy's R Us preorder; got it on release day.) Ours lasted a good 2 years before it finally got the RRoD. By that time, the exchange program was in full swing, but with quite a backlog. In return, we got a brand new Falcon unit, which is running fine to this day. (Not that it gets much use these days...)

[@RocketRenton]

Yeah mine lasted 2 years then RROD, it was a 360 Slim Elite model.

[@TubbyJ420]

I remember seeing white triangles on screen while playing Outrun Arcade. That was a Wednesday. On Thursday it gave me the RROD. On Friday i bought the Slim modell & spent all night transferring licenses and re-downloading games. Was playing again Saturday.

[@RocketRenton]

white traiangles is artifacting, I actually just seen a 360 Slim do exactly the same issue the other day on a livestream, it was on Black Ops 2, it appeared at the bottom of the screen, a white line of triangles appeared, it was scrapped I believe in the end as unrepairable.

[@therealtruth2324]

I remember trying the penny trick and also removing the x-clamp mod. I finally bought the newer 360 version, I found it used for like $40 bucks and it never gave me any problems. That was my 3rd Xbox 360 console I purchased. 😂

[@marshinz5696]

I remember Cutting a Square in one of my 360s with a hot Knife, and installing a Case Fan that had to be rigged to plug into a wall socket. The 360 is arguably my 1st PC Case Mod.😵

[@DaBigCheeso]

And these random repairs are why I only have 360 Elites in my collection. No telling how much extra heat and stress was put on the board from poor attempts to fix a red ring

[@BrD4GOD]

Or you can just buy the later models with the HDMI. Usually those were fixed. I think after around 2009. I still have an Arcade one that works great. Stock.

[@DaBigCheeso]

@@BrD4GOD that's the Elite I'm talking about. Also has built in WiFi but it's not the greatest so I ended up running cables anyway

[@RocketRenton]

My 2007 launch Elite got the RROD, so Elites are not immune, my 1st one was broken out of the box, had a broken disc drive so swapped it for another which RROD's 2 years later, luckily Microsoft replaced it for me under the 3 year extended warranty.

[@DaBigCheeso]

@@RocketRenton the Elite launched in 2009. If you had the 20gb model from 2005 it was labeled as the Pro (the Arcade was the SKU without a HDD). Red Rings are definitely still possible on the Elites but should be much rarer because of the redesigns.

[@realKryptic17]

@@DaBigCheeso well tbh you’re confusing a slim with a 360 elite. 360 elites were falcon board and later inside a black fat case with swappable faceplates still and came with 120gb hard drives. So people replying to you are thinking you’re talking about that 360 when you’re talking about the later redesigned 360 slims, you likely got the 250gb model which had the shiny finish and built in WiFi.

[@vinyminotaur2694]

3:18 One very important detail you missed out on is that the reason those solder bumps were cracking after thermal cycles was because of bad underfill which wasn't appropriate for the GPU as the GPU sillicon would regularly exceed the temperature that the underfill was designed to handle and would soften which should never ever happen and the underfill would start to push away the sillicon from the substrate causing the solder bumps to crack and lose connection. This was later fixed in consoles made in around April 2008 onwards where they used the correct underfill. 4:45 E74 error is NOT caused by the HANA chip. It is again caused by a faulty GPU, specifically the EDRAM has failed. The reason this would work was because the weight of the coins was enough to push the EDRAM to gain back a connection on the substrate.

[@glitchunicorn]

I baked mine in the oven for about 20 minutes. Worked great!

[@robinson32993]

Yeah I lost my second 360 to that exact Nyko intercooler fan 😢

[@RocketRenton]

I had one but only used it briefly on my 1st 20gb white Premium, took it off in the end after I read about the issues it caused.

[@GG4GJake]

I used the towel trick so many times before I finally sent it in. It definitely worked lol.

[@Tinfoilist]

Not saying you're wrong but I fixed four RRoD consoles using the "bolt and washer" method back in the day, one was my own and the other three belonged to my friends. They worked flawlessly for years after the fix. One of them is still owned by my friend and he plays it regularly without any issues.

[@B0H0]

I bought my first 360 from a friend for $40 it had RROD. His dad basically bought him a new one and I bought the old one knowing I just had to buy a shipping box and call microsoft and they'll pay for the label. I sent it in and about 2 weeks later I had a fresh 360 with some free Xbox live. This was 2007. That same xbox eventually got RROD too. So I did the classic Towel trick which worked for a bit. But what really worked is just taking the plastic case off and setting it on a box. Never overheated again after that.

[@Gawlakman]

You mean you just took off the shell and played it with all the internal stuff exposed?

[@m2pt5]

@@Gawlakman You won't get great airflow, but you can't get much better ventilation than "no case". (You could also point a much larger fan directly at it.)

[@Gawlakman]

@@m2pt5 yeah those are good ideas as a last resort type thing I guess

[@Klaw117]

I love these stories and the small technical explanation that accompanies them. Thanks for bringing this back. I was lucky to get into the X360 after the S model was out and fixed most of the RROD issues. Somehow, my cousin with a launch model never suffered from this. I assume it's because he kept his in a well ventilated area.

[@BEARNEY6]

I've done the penny trick, it worked for me. I sold it while it still worked. I didn't wrap them in tape, I used thermal paste. I still have that RadioShack thermal paste tube.🤣

[@RocketRenton]

[@AbeyantHero]

I got so hesitant to get a 360, that I actually bought the Elite model with a warranty just in case. I just wanted to play the backwards compatible library that only SOME PS3s could do. Incredible generation with that massive manufacturing/design defect aside

[@PrinsessePeach]

The reason heat “works” is because you are flexing the board so any cracked or otherwise broken solder balls would make temporary contact again. Most Xbox 360’s had bad GPU, and a reflow would not fix it, only a replacement GPU would be a real fix. I recommend watching the documentary by RIP Felix.

[@JeskidoYT]

nowadays the ps5 flexes its own plastic on heat intensive games, yet the console design is astounding in exhausting heat

[@RocketRenton]

Josh and Felix are regulars on Computer Booter's YT channel, Josh is the 360 expert who worked in the shop and Felix is the master PS3 guy who solved the YLOD issue which was the NEC Tokins, which have now been replaced by parts he has designed for frankys, which are PS3 A01 models, that have PS2 backwards compatibilty, the real rare models, they then have a 40nm Cell replacement of the original 90nm Cell as that is the cause of the YLOD as well. It costs about 650 and a franky will sell for about $1000.

[@dazamad]

So for the other ps3 models not BC you cant replace there rsx chip? ​@RocketRenton

[@PrinsessePeach]

@@dazamad You can, but it's not worth it as there are no benefits of doing the swap on a non backwards compatible system as it is quite expensive.

[@charlieb308]

I had a brand new Xbox 360, I cleaned it and my apartment all the time, what I did was rigged up a system where my gaming PC and my 360 had my AC unit blow cold air on it all the time, I used PVC type tubes. I have had 3-4 other 360s and never had any issues with them or any gaming systems without the AC blowing on them.

[@Gawlakman]

Smart solution

[@RocketRenton]

Good idea but condensation would be an issue over time which would then result in the heatsink and other components rusting out.

[@Gawlakman]

@@RocketRenton just having a fan blow on it instead of A/C would fix that issue

[@robinson32993]

I went through 3, 360’s before I gave up on getting a 4th one.

[@johnbillings5260]

My first 360 was a refurbed unit that was guaranteed for 90 days. Not long afterward it RRoD'd on me. I had everything going on it at the end... Pennies, X-clamp fix, fan mod, additional 80mm fan that I cut into the case for, towel trick, oven trick. RIP Falcon 360

[@LoneWolf526]

I didn't have to do any mods thankfully to mine, but I do remember letting my friends borrow The Last Remnant and them telling me it red ringed their systems 🤣.

[@GAMExLOGIC_]

I replaced the clamps with bolts on dozens of 360's, but I used the bolts to attach the heatsinks directly to the metal case of the 360 to reduce the flexing of the board. Most of these 360's are still working now a decade later.

[@Mickdoodle1]

i saw the pennies in the thumbnail and i got so much nostalgia, i was probably 10 years old fixing them with pennies and towels and changing the leds / rgh and jtag mods

[@Dan-xv4vx]

Brilliant video. More like these please. The clips from the old youtube channels were awesome too.

[@BrD4GOD]

Great video man. This is why I watch your channel man. Videos like this save it for me. We never actually had to do mods like this. We would always send it back to Microsoft and find something else to do with our time. I still had the OG Xbox so firing up Halo was great. I think maybe we tried the towel one. I say we because my friend had the 360 @ launch. I think he went through like 3 systems before he got the Slim. The Slim is the way to go man.

[@Mrgtaman533]

Me and my friend would wrap 3 blankets around the 360 to get it working oh the struggle lol

[@RocketRenton]

They were the days lol.

[@GamingintoEternity]

John, perfect timing of this video. I just pulled out my Xbox360 with the original motherboard/no HDMI port. This one got the RROD probably 2011. My new passion is fixing old consoles. Fixed my OG Xbox a year ago and just bought a fat PS3 and upgraded the hard drive and flashed custom firmware. Well, just fixed my Xbox360. I cracked it opened and found 7 capacitors had burst, but lucky nothing dripped on the board. I removed those and replaced. I then used a heat gun at 450 degrees and re-flowed the solder on the board. I then added flux around the chips and heated again. Let the board cool for an hour and then re-applied thermal paste. I fired it up and no more RROD. I'm again enjoying playing this console!

[@XenonXBR]

These videos are so fun, love seeing them

[@_ElisDTrailz]

I reballed more of these and ylod ps3's than i can count. Good times. The funniest home "repair" method i remember is when people tried to reflow the system using their oven. Saw that a few times.

[@MmntechCa]

Towel trick was all over the internet back then. Never had a 360, but I remember using the "Gilksy Method" on my YLOD'd phat PS3. Which involved using a heat gun on the back of the board to supposedly reflow the solder under the main chips. I did this after I had already sent it back to Sony for the same issue, and paid a non-trivial sum for it to be fixed. Only lasted a couple months after that. In hindsight I should have sent it back again with a stern letter, but I was dumb and desperate. Of course this was when we all thought it was bad solder joints, like on the Xbox, when in reality it was faulty tantalum caps (IIRC). It did work. Got another couple months out of it before it died again. Then I caved and bought a Slim. Was the 60GB Cadillac model with hardware PS2 back compat too. YLOD got a lot less press than the RRoD, but it was still a huge issue for those first gen PS3s. That triple beep still gives me nightmares.

[@godlikemike666]

Really enjoyed this one. Thank you

[@LuciferHunter-kt7pm]

I was in basic training at Fort Benning when COD 4 Modern Warfare came out. When I came home for holiday block leave my 360 had the red rings of death and had to send it to get fixed. Wasn’t a total loss. I just play Dawn of Sorrow on the DS for two and a half weeks.

[@thomaspickering2344]

This is a great old school spawn wave video!

[@Wishes_for_Fishes]

I did the towel trick and it worked, and I still have that 360 to this day. It never got the red ring again. Played on it all the time too.

[@GregD50]

I wrapped the towel around and put 2 cotton buds(Qtip) in the back to stop the fan turning so as to get it working again. It worked long enough for me to get my save data off and onto a new console

[@EllieNotSoSmelly]

Luckily, I got a 360 post Red Ring, but I did do the makeshift battery pack controller trick with pennies and tape

[@maxwellsmith5627]

The reason for RROD isnt really because of the solder balls, but really the underflow on the chip. The channel "Rip Felix" has a really good video on this.

[@TheStrayHALOMAN]

The penny trick worked, I used to do this I was around 11 years old. My dad actually gave me square copper discs from his shop and they worked alot better. I did that and bought thermal paste from radio shack and replaced the paste on everything even removed the thermal pads and used the copper as a cheap heat sink.

[@jocking0]

The towel trick worked for me to sell my console at GameStop 😂

[@VyperEye89]

I’ve done the penny trick, third party fans, added two more intake fans, replaced the x-clamps with bolts and washers. I even played it horizontal with it raised from the bottom by an inch with stacks of quarters at each corner with a desk fan blowing across it. lol

[@jcawthon99]

One year at Best Buy our Christmas bundle for 360 had 3rd party controller & the external fan included!!

[@infernaltim]

I love these story videos.

[@ChadBurdette88]

I’ve never felt a power cord brick more hot than the 360 power brick 😂

[@njones621]

My first 360 red ringed after 2-3 years. My fix was to buy a used one on Craigslist for $80 (this was like 2008-09). I still have that 360 and it runs fine.

[@cppctek]

I loved doing cooling mods back then. I got a ton of my early experience in modding with this and the Dreamcast and ps3.

[@-PLAYER0NE-]

Me, and my buddies would just wrap it in a thick blanket. Let it run until it went into its overheat shutdown mode, and we'd get another 3-4 weeks out of it. Worked every time. Didn't need to disassemble it at all and then we got it warrantied lol. Idk where we even heard of that back then...

[@PilaCiu]

My friend did the towel hack, it worked for 3 hours, they attempted it again and the PCB basically melted and was unfixable.

[@sneakingelephant]

My penny trick has served my og 360 for over a decade now

[@kellyjr0918]

I'm glad my old 360 never had any problems when I was a kid

[@gregsmith9183]

My 360 was the original FAT white model and it never got the RROD but did stop working exactly 1 year after purchase with the E74 error. Which was something to do with the graphics chip. Since it started getting artifacts before it stopped working. Got a new later revision console at the time and it's still working to this day with the RGH2 mod. Even though as you said the fans are quiet loud.

[@modermonkula]

The Microsoft documentary on Xbox is actually pretty interesting

[@hashinator7]

I had completely disassembled my system, and had all the components laid put on a table, still connected to the board. I placed a fan next to it blowing across the components and that saved it for a few months.

[@joshuarivers683]

Owned my original arcade 360 from new for 8 years and it was used almost daily for the whole time, never had any issues with mine while friends went through at least one if not two or three units.

[@BMR86]

I skipped the whole Xbox 360 generation and during that time my middle brother worked at a call center, he was in the Xbox customer service area and told me about this stuff how people would call in reporting this red ring of death thing, I remember during lunch one afternoon he told that name and what was happening, it felt so odd that even though I didn't have one, as a gamer on the og Xbox before that generation it shocked me how bad the problem was and he'd say he would get flooded all day with calls from people and all of them were about the red ring of death lol

[@GaretStrife]

The 360 was the first console I bought with my own money. I have to say, I was incredibly lucky regarding the RROD. Still have that same console, and it never ringed once. It even survived my cousin who mistook a can of WD40 for a can of compressed air.

[@ChicagoBulls1984]

Wow the back of that 360- component, vga, s-video, 4 usb ports

[@FintanMoloney]

I always love these videos when you talk about working in Gamestop and doing repairs etc. From my own perspective the Xbox 360 is still my favourite Xbox. When I got one on day 1 I think it lasted about 1-2 months and I had to return it due to RROD. Microsoft sent me a box to put it in prepaid for UPS and UPS collected it from my workplace. I think it took about a week for them to deliver me another one. That one lasted about 4-5 months and back it went again. Finally the one I got after that worked fine until I sold it to buy an Xbox One. I'm very interested now to buy a 360 again as the games and consoles are going up in price but deals can be had for a 360 with a bundle of games. I'll make sure its a later model though - maybe a slim.

[@agentomecha634]

I didn’t get an Xbox 360 until around the launch of the Xbox One. I would get an Xbox 360 E for my birthday along with a copy of Sonic Generations and later Sonic Unleashed. I still own that console and games to this day.

[@barbsfpv3066]

I got lucky. I have a Xenon board manufactured in December 2005 and it's still running strong.

[@RobertFixit]

I towel modded soooo many 360s back then. I was literally living off the money. I also modded the fan to be 100% all the time so it would not overheat anymore. The cardboard mod was good too I did that on my personal one.

[@jakemueller6173]

My go to was to put Q-tips through the back to stop the fans to overheat it!

[@Matt23488]

Yep I remember getting the red ring at the worst time. The original warranty was already expired, but Microsoft hadn't yet extended all warranties for the issue, so I tried fixing it myself, voiding any chance of letting Microsoft fix it. Long story short I was not able to fix it and that was the end of the 360 era for me. It still has the original Blades UI and everything.

[@brentvance9090]

I got the RROD and replacement from MS. I was still worried about it tho, and modified my entertainment system with 6” externally powered fan. Fun times

[@SoulCasta]

Never had a 360, but remember hearing about the towel trick and about that fan attachment. The other stuff is new to me... or maybe forgot.

[@achroous2]

that explains why my Intercooler 360 i found at goodwill wouldn't power on :(

[@Nick-oz5yn]

Proudly fixed mine twice with the towel trick!

[@jdmweeb8663]

My first 360 red ringed 2 weeks after I got it for Christmas 2005. Got a replacement which worked for a good couple years before it too red ringed right after Microsoft's extended warranty ended

[@themidcentrist]

I bought an early release Xbox 360 at a garage sale for $20 that was still functional a few years ago. To keep it that way I basically just smashed the case open with a pry bar (since that was quicker and easier than opening it the correct way and it is a POS anyway) and played it with a few desk fans set on high blowing directly onto the exposed motherboard. Crude, but effective considering it is still working. It's ugly, but I keep it hidden when it is not in use.

[@mikeobier7913]

Oh yeah I remember. That was a bad time. The red ring got me on three 360s. I was able to send the second one back to Microsoft to be repaired. It took a week. I was shocked it was that fast. In just a few weeks it gave me the red ring. At this point they had the revised black 360 come out. I bought it and I can still to this day play the console. My 7 year old son love playing the 360.

[@bretthake7713]

Hot towel trick was for E74 if I remember right. If you do it too many times it stopped working and for mine I would put a hair dryer in one end of the towel burrito to force hot air in the vent and overheat it more 🔥😅

[@ExecuteOrder]

I did the cue-tips in the fan holes. It would stop the fan and jolt it back on. Not permit fix

[@natewesselink]

Tried the towel, worked for a few days but ended up sending it off. Took about a week to get mine back.

[@johnflapper]

My friend ended up giving me one of his red ringed, he had 2, 3rd was finally working. Getting it repaired and customized was cheaper than buying one

[@elhazthorn918]

I've seen photos recently, of old consoles sold as "broken." The buyer opens them up and sees SEVERAL discs in the disc drive. PlayStation discs inside an Xbox, and vice versa. It's what happens if you don't supervise young children around consoles.

[@krisc1684]

These are my favorite SW videos

[@RokushoHasashi]

I used to have the 4GB Xbox 360 White Console because my dad got it for me from his old job as a janitor for a private school, and it lasted me a while till I got the RROD. My friend actually helped me do the penny trick, and it would work for a long while till it fried on me. I never trusted those Xbox 360 attachable fans to "cool down" your console. Later on, my dad bought me the Xbox 360 Slim a week after release, and it still works now as of May 6th, 2024.

[@KennyFrierson]

I remember someone doing the penny stack and saying it worked. Didn't last forever but it lasted for a bit.

[@ThoraxtheDarkk]

This is better content than going over heresay

[@GUCFan]

Good god the towel trick, i did that on a friend's Xbox 360, letting me borrow it to try and fix it. Although i was able to play MX vs ATV Untamed during that weekend, the week after that my friend just told me it red ringed again.

[@themax4677]

I did one repair attempt on a core system and it did work for about another 6 months. When failed a second time I just picked up an arcade edition replacement. I forget what I did, but it was not the towel. Probably redid the paste kind of thing.

[@aquilescaigoyo533]

A lot of pawn shops where victims of the towel solution here in my city. :V

[@Gawlakman]

I actually bought a 360 from a pawn shop I go to a lot to get cheap games and it hasn’t had an issue. Didn’t come with a hard drive but I am only using it to test games anyway, it’s not my main one.

[@chandlerbing7570]

I did the Q-tip in the vents trick and the towel trick back in the day and even both at the same time. nothing fixed mine unfortunately

[@digitalamok3453]

We tried the coin trick but we glue them together and only two and it works really well on one console and the towel works too

[@Evilnor7]

I always made sure my 360 had plenty of airflow around it and let it rest when it overheated (which was the only time it got any red lights). My 360 still worked the last time I had it set up (about 4 years ago). Maybe I just didn't hit the magical amount of playtime?

[@feeamerie5011]

I got through 5 RROD - all new replacements under warranty so no tampering! I was very happy with the redesign model. Wife has the SW Kinect one to this day. I was tempted to get a ps3 every time it happened but then they started getting the dread yellow lights - basically bricked. Luckily, the fifth replacement was an elite where the problem had been sorted by MS in manufacturing. It lasted about three years until we traded it for the SW model. Just recounting that makes me realise we went through seven 360s in that one generation. Taught me never to be an early adopter again mind you 🤭 In all that time we also had one- just one- GC and it works flawlessly to this day. FairPlay to Nintendo for their build quality.

[@michaelm9211]

I remember tried putting mine in the freezer to fix. That was the rumor I heard about fixing it. I can’t even remember if it fixed it, I’m pretty sure it didn’t work lol.

[@Tomtrocity]

From my Facebook status in July of 2010: "...but I successfully repaired my old xbox 360. it seems the nylon washers plus addition tiny bit of thermal compound ceramic paste got it to work without reheating it again. Now to sell it but where..." So clearly I was one of them that used the screws and washers method, whoops. I sold it with the limited edition Halo 3 ODST controller at the time. After I got the Silm console, I had to sell it somewhere but not to Gamestop. Either way, it was a fun & learning experience in console tinkering & my silm still works to this day.

[@Covnam]

Towel trick worked for me lol Got my system working just long enough to get my Mass Effect save so I could keep playing on my new system =)

[@ElZamo92]

Yes, I remember, and I also remember doing the towel trick a couple times until I found out about Microsoft replacing Xboxes for free... but then the one I got sent also got the red ring of death... which I tried to replace too, but Microsoft wouldn't do it so I had to make due with my Wii until I won an R2D2 360 on a raffle.

[@seththebeth]

The timing of this vid is so funny. I opened up my old 360 to clean to the dust out a week ago (it was pretty dusty, thought it would bring the fan noise level down a bit but didn’t do a ton in that front) So are you saying that those aftermarket fans WERE a good solution? I know there are better options like literally just the slim or E versions but still this is my first (technically second cause I too had the RRD that Microsoft replaced back in the day).

[@xplasmadragonx5280]

You should replace the thermal paste on the CPU and GPU to lower the temperatures and it will quiet the fans more. And no, the aftermarket fans are not good for your system (external ones). Internal ones can be ok if done correctly.

[@ImChrisHansen.]

I remember i wrapped my 360 in a towel and it worked lol

[@DisturbedbyDeth]

I got a single red light error - red dot of death - which wasn't covered by the Microsoft repair warranty at the time, so I ended up having to wrap my 360 in towels to force a red ring of death error - it eventually did and I got a replacement console for free.

[@Gawlakman]

Yeah intercoolers I’ve known are bad to use on any console. I remember a GameStop employee telling me that any ps3 using an I tercooler would instantly void the warranty. Also the towel trick I learned from someone on a 360 subreddit and that’s good to know that it’s only a temporary fix.

[@Master-Cunninglinguist]

I tried the towel one. Had a friend tell me “if you can fix it, it’s yours” I didn’t get n Xbox 360 until one of the elite revisions.

[@grayson32211]

Fun fact no matter what if you had to send your xbox 360 to gamestop back then they would apply the 12v fan mod and the bolt mod even if you didnt have the red ring

[@KORUPTable]

I did the aluminum tape on the fan shroud and bought the whisper fans, I then jtag modded it and flashed the nand so the fans ran at 100% it still runs great after all these years and it was a falcon mobo so I'm proud of the lil bugger.