Best Xbox 360 modding video in years. Next one should be on adding roms and updates.
@RG2SoldiersGaming28 күн бұрын
Definitely one of the best 👍
@TheDiWHYGuy20 күн бұрын
Just dropped the new video linked at the end of this one, I hope its as good as this one cheers mate!
@tonyhell23429 күн бұрын
I do have to say it's pretty ballsy to disassemble, and solder outside. But man youre video was extremely informative and straight forward. Easy to follow even for a beginner.
@TheDiWHYGuy28 күн бұрын
I had to reread that I better understand what your saying lol. Yeah bro I do everything outside for the lighting seems like no matter how many lights you use its never as good as the sun and lucky the deck has a deck above as well so even if it starts to rain its pretty safe out there I would love a fancy lab to work in but we only got a one bed room flat haha thanks for watching
@Stallzyx21 күн бұрын
Great to see so many people interested in the 360 right now and also what's possible with RGH but I used one for like a year until last autumn season and then I noticed microsoft went and banned my retail console (a special edition one I've had since 2010 and made most of my xbox memories on) possibly for sharing the account I was mainly playing on as an ip ban or they just did every console regardless so that has put me off doing it completely even though I had helped between 300 and 500 people with unlock alls for free on the older call of duty games so that they can start playing if they've come from playstation or lost their old accounts etc
@TheDiWHYGuy21 күн бұрын
yeah bro got to get them while they are cheap ;) I get that sadly got to stay off line with mods running not worth it you can use shadow servers but is it really worth it...
@cjstout16 күн бұрын
That's some wild west, care-free soldering - and I love it. Great work and thanks for sharing.
@TheDiWHYGuy6 күн бұрын
Ruff is good enough haha cheers mate 😁
@web3twon29 күн бұрын
Awesome video, I just did this last week! Awesome mod. I will say, KZbin videos make this mod look much easier. If you have not soldered before I would NOT recommend being the project you learn in. Get some practice boards and practice a bunch first
@TheDiWHYGuy28 күн бұрын
Thanks so much, yeah bro 100% that is the best way for someone to learn and a dead unit to practice on helps a lot too.
@jesseslack457824 күн бұрын
You're the man Mikey!!! Epic to see you smashing the tube. Your wealth of knowledge never ceases to amaze me. Keep it up brother
@TheDiWHYGuy24 күн бұрын
Cheers brother might be time to get out the old 360 ;) haha thanks for watching mate!
@RG2SoldiersGaming28 күн бұрын
I’ve been watching a lot of these videos recently and yours was amazing 👏👏
@TheDiWHYGuy28 күн бұрын
That's so awesome thanks for watching mate!
@cassiuscartland28 күн бұрын
I wish the 360 became like the Wii U and Wii where you could easily mod the console without any added hardware (other than an SD card ofc)
@TheDiWHYGuy28 күн бұрын
Yeah bro crazy how well they locked it down even the PS3 is way easier but if you can find a dead Xbox360 to practice on well worth it!
@VwSvNexus19 күн бұрын
My only advice would be to make your wires smaller, it helps with the glitching times, other than that great vid! :) Also PLEASE PLAY BIOSHOCK INFINITE
@TheDiWHYGuy19 күн бұрын
Yeah that makes sense as the timing is to the Nano second so will make it more precise, I was more so going for ease of connection direction haha. Yes bro I been playing a lot after this vid, its amazing game what a out of it setting pretty cool. Thanks mate!
@djangosoftwaredeveloper26 күн бұрын
There wasn't a lot of RROD on the slim model they fixed that with the original model with the jasper chips. Otherwise cool video 👍
@TheDiWHYGuy26 күн бұрын
Thanks for the info I know what you're saying the slims red dot not ring and not as common as the ring death I will try explain better next time!
@oldskolacura979822 күн бұрын
True that was a major issue in the falcons
@twistedmack27 күн бұрын
Most definitely do more videos please!!! This was an awesome tutorial, I look forward to watching more :D . I also am interested in old pc hardware gaming in 2024.
@TheDiWHYGuy27 күн бұрын
Cheers mate 100% more of these to come I got to get a few parts I want for this Xbox before the next one on this topic. Next I want to do a Linux vs Windows 10 video for my Windows XP PC as best dual boot option for retro hardware to get online should be finished in a few weeks, thanks for watching!
@twistedmack26 күн бұрын
@@TheDiWHYGuy Sounds like you've got some fun stuff planned!
@mvindane22 күн бұрын
More homebrew please and yes love the video so much effort.
@TheDiWHYGuy22 күн бұрын
Editing it as we speak haha you must of known something, thanks so much mate!
@akiyamaryou70620 күн бұрын
Hello! Awesome tutorial! It was really easy and super fun to follow (I'd say the best I've seen) Two questions: 1) By decrypting the nand, I believe you mean - just put the CPU key into J-Runner and click "Create XeBuild Image"? 2) Taking the power cord out seems super important in a few of these steps, otherwise the console can crash and get an hardware error? Really new to the Xbox 360 modding scene, so I find all these tutorials very helpful to watch.
@TheDiWHYGuy20 күн бұрын
Thanks mate, yes that's right J-Runner needs the CPU key to decrypt the NAND in order to build the new one based off the old one. Yes that's also correct when you unplug it and plug back in it resets the chips so the new code is loaded so the next step will be possible. Also if you mess up your NAND J-Runner has a working folder where your OG NAND is copied to so you can restore them back to factory and try again, good luck mate thanks for watching.
@akiyamaryou70619 күн бұрын
@@TheDiWHYGuy So I bet on myself and bit the bullet. Wired up my Trinity and did the same steps in the nand programming as you did. And Boom! My first Xbox 360s is now RGH'ed. Thanks a lot for the tutorial! Wish you a nice day!
@TheDiWHYGuy19 күн бұрын
That's so awesome well done and enjoy your unlocked beast 😊
@OneTheAndOnlyOne25 күн бұрын
Nice to see there are still people modding Xbox360.. My Phat XBOX360 (the OG 2005 model with j-TAG mod that I did yeaaaaaarrrsss back because it also had the OG dashboard) had RROD couple of days back, so I bought an S today and already had a couple of picos laying around, so the RGH3 was peanuts. I now need an enclosure for the Phat HDD (500GB), for now I just removed it from the Phat case and put it in the Xbox360 S with some stickytape on the HDD lol. So didn't need to do the aurora and such. Instantly working this way. So didn't need your video but just wanted to give my "support" by commenting :D :P
@TheDiWHYGuy25 күн бұрын
Cheers mate thanks so much. Sounds like you had it sorted did you have the Blades Dashboard sad to lose such a Xbox but not much you could do it amazing I went this long... Glad you got a S sorted to replace the old Phat one, hopefully a Modders remakes Blades for us one day :D
@OneTheAndOnlyOne24 күн бұрын
@@TheDiWHYGuy yeah it was the Blades Dashboard :( I had it because I bought it back in 2007 without DVD drive and didn't know you needed a DVD drive LoL. But I kept it and when I found out the J-tag stuff I finally could use the Xbox :D I was always buying faulty stuff even as a kid so I could repair it.
@TheDiWHYGuy24 күн бұрын
@OneTheAndOnlyOne I bet it was nice while it lasted :) you can clone your old drive to a bigger 2.5" drive if you got loads of stuff to save and add to the new S model just editing the vid atm... That's the way I did the same thing best is when you take two broken things and make one good one keep up the good work bro!
@OneTheAndOnlyOne23 күн бұрын
@@TheDiWHYGuy I just grabbed the phat HDD from it's casing and put it in the XboX 360S. Some tape on the HDD so I can pull it out again, lol :P
@TheDiWHYGuy22 күн бұрын
That's the way brother love it :)
@Goglu42022 күн бұрын
Great video! I think I'll try it!
@TheDiWHYGuy22 күн бұрын
Nice you can do it!
@numbersix323729 күн бұрын
Great work mate
@TheDiWHYGuy28 күн бұрын
Cheers mate!
@mydogzty20 күн бұрын
Ok this video was actually good for what it is just some editing and showing the process and getting it done! I bought a modded 360 slim, hd goodness and wireless controlelrs ovet he og xbox modded, well at least usb tranfering is handy, and running og xboxb games annoyigly look better on 360 so yea. Xbox 360 runs ps1 games o Im sold!
@TheDiWHYGuy20 күн бұрын
Thanks mate sounds like a good investment
@Jailbroke28 күн бұрын
10/10 video g
@TheDiWHYGuy28 күн бұрын
Thanks so much bro!
@brayloncodes20 күн бұрын
Just picked up an Xbox 360 S, with 5 controllers and 2 games for just $50! Can't wait to mod it.
@TheDiWHYGuy20 күн бұрын
Nice, good find have fun modding mate :)
@anthonyhowson716528 күн бұрын
Technally easy for those who have soldering and scratching techniques because u have to scratch a via and there's a track next to it so be careful
@TheDiWHYGuy28 күн бұрын
Your not wrong, it could be bit much for some but if you find a dead unit to practice on you will get there in no time. Cheers mate!
@anthonyhowson716528 күн бұрын
@@TheDiWHYGuy yeah went through 4 trinity boards before I finally got it right also tried a corona board but hated it and salvaged a halo reach case the grey 1 in the process
@TheDiWHYGuy28 күн бұрын
Holy sh1t bro 😳 thats guttering can you make a jumper wire to fix the motherboard you can send my photos of the damaged boards might be able to save them my email is info.diwhy@gmail.com or could be used as practice boards for upcoming modders thanks for sharing hope I can help!
@anthonyhowson716528 күн бұрын
@@TheDiWHYGuy I threw 2 away I only kept 1 trinity board where I've took the chime off plus 1 corona which it is glitched but crashes I think I damaged underneath the gpu/cpu plus on trinity I've pulled 3 tracks up doesn't boot at all
@TheDiWHYGuy28 күн бұрын
@@anthonyhowson7165 it happens some times when you destroy a trace you can solder a wire as a jumper from the closest connection points but not always possible just got to track the circuit what can be a bit of a mission on modern PCB's...
@SendingThruHardware28 күн бұрын
I sell modded 360s inside the US :) Nice video man I'd only recommend using a SMD resistor instead.
@TheDiWHYGuy28 күн бұрын
Cheers mate, you doing good work keep that up, was thinking about using one off a old gpu or something but just remembered I had that old circuit board laying around so went with that instead of sacrifice a gpu 😆 thanks for the pro tip 😀
@Progressive.G28 күн бұрын
Great video 👍👍👍
@TheDiWHYGuy28 күн бұрын
Cheers mate 🍻
@mlgp03p28 күн бұрын
Great job, I'll be doing this mod tomorrow as my pico arrives tomorrow aswell. I've read that you need 28AWG-30AWG wire for the mod, what kind of wire did you use?
@TheDiWHYGuy28 күн бұрын
Nice one thats good timing. I always use cate6 solid core ethernet cable for fine soldering it worked really well on this job just rember to ad a 10k resistor on the pll wire and you will be good also stranded cable will work just make sure its really well twisted and tined so no lose wires sneak out. Good luck mate just take your time and have fun 💪
@mlgp03p28 күн бұрын
@@TheDiWHYGuy Thanks a lot! I'll check if I have some old ethernet cable lying around, as for the resistor, I have ordered a whole set of 400 resistors (different values) along with the Pico.
@TheDiWHYGuy28 күн бұрын
Nice that's the way sounds like you got it sorted
@mlgp03p26 күн бұрын
@@TheDiWHYGuy Yeah, I did get everything sorted out before doing it. Had to make sure it all goes well as it is my first ever mod and the first time I would solder on a mobo so I was a bit nervous. Thanks to your tutorial everything went well, I have just finished setting up Aurora and I'm looking forward to test some games later. I'm still shocked I got it working first try , thanks a ton for the help and keep up the good work!
@TheDiWHYGuy26 күн бұрын
Nice one you done well congrats mate! Hope you have loads of fun on your your new beast of a 360 :D
@Snipper-zk3yc28 күн бұрын
Now all you need is a cooling mod so the dam thing doesn't overheat.
@TheDiWHYGuy28 күн бұрын
100% soon as I get my next job come in I'll be trying to find a water block for it, so stay posted cheers mate!
@oldskolacura979822 күн бұрын
Don't use the falcons. The jaspers are upgraded and the Trinity and coronas don't have that issue. Plus in dash launch you can crank up the fan speed if you wish.
@fu1r417 күн бұрын
3:40 I'm crying when i see how people remove the X-clamp. I have to create a video showing how to do it the proper way ...
@TheDiWHYGuy17 күн бұрын
With the tool?
@fu1r416 күн бұрын
@@TheDiWHYGuy No, with a screwdriver. It is a bit hard to explain in text, but you put the screwdriver similar to what you did but on the other side of the pin and the opposite of the X-clamp will popup.
@TheDiWHYGuy16 күн бұрын
Sweet good to know that was my 1st time opening a 360, cheers mate!
@ryker8628 күн бұрын
Just a tip: About a year after finishing one of these builds, I discovered an overheating issue. It turns out the heatsink is poorly designed. If you flip it over, you'll notice there's only a small area of copper, which doesn't fully cover the CPU, leading to poor heat dissipation. To fix this, make sure to apply thermal compound evenly to the top of the CPU. I know this is unconventional, but it works for this console. I also used MX-6 thermal paste because it performs better at higher temperatures. Finally, increase the fan speed by 30-50% using the DashLaunch homebrew app. Hope this helps!
@TheDiWHYGuy28 күн бұрын
Yeah bro 100% I'm on the hunt for a water block thanks mate!
@retromodpleb773222 күн бұрын
Single case with water cooled PS3 & Xbox 360 would be awesome. Could you put a Wii in it too?
@TheDiWHYGuy22 күн бұрын
year bro that's a awesome Idea do they have HDMI? I want to use a KVM switch so it will have one output ;)
@user-fy6ts9nw5c23 күн бұрын
Sleeper PC just a fancy update and you got a windows computer
@TheDiWHYGuy23 күн бұрын
Not far off really :)
@DRMZBeatz21 күн бұрын
You literally modded and disassembled your xbox the exact same way I did lol
@TheDiWHYGuy21 күн бұрын
No way what are the chances lol keep up the good work and thanks for watching
@DRMZBeatz20 күн бұрын
@@TheDiWHYGuy yes I had to use the same phone tools to get the x clamp off 😂 I was not about to buy a damn tool just to remove some clamps
@TheDiWHYGuy20 күн бұрын
haha that's awesome! Yeah stuff that is never worth buying, its like rebuilding a car engine always some special tool in the book that only the certified guys can get so you have to make your own ;)
@Stallzyx21 күн бұрын
Even though I've seen the rgh install done before a few years ago by someone else, your version was very interesting however I would just get someone to do it for me. I am however potentially interested in fixing my non-slim console or possibly others which have had RROD however I hear there's a manufacturing fault where the cpu or gpu solder messes up over time or the motherboard cracks under repeated temperature changes from play so maybe it's just best to only run slims regardless of if you play normal or RGH. The xbox sound seems to be duplicated and slightly echoed in the video but wasn't too distracting. As my other comment which hopefully shows said, it's maybe the best option to keep them offline unless you're really careful and take lots of measures to protect your other consoles or gamertags being in jeopardy
@TheDiWHYGuy21 күн бұрын
The fair mate best thing to try for the bad solder on the old skool ones is strip them done to the MB then cook them in the oven for 10 min on 140c preheated you might get lucky other wise they good to practice the mods with as if its already dead you got nothing to loss haha. Oh year I think I had a setting wrong in OBS thanks for that I will try fix it for the next video. cheers :)
@Stallzyx21 күн бұрын
@@TheDiWHYGuy yeahh sounds good and I've heard that about the oven to be fair but not sure my mum would allow that hahah
@TheDiWHYGuy21 күн бұрын
@@Stallzyx haha I know what your saying the wife made the clean the heck out of our one last time I fixed a gpu but it work so I can't complain 😅 thanks for watching
@loiscampos455320 күн бұрын
So in short, all you need to do RGH3 is a pair of wires, 10K resistor and one Raspberry Pico(plus connection wires)? and when you are done just remove the pico(plus connection wires) but keep the pair of wires + 10K resistor? I have a a 4GB Corona model(supposedly) and seeing this is tempting...
@TheDiWHYGuy20 күн бұрын
Yes that correct for the Trinity model. The RonaXboxs have two types one needs a postfix adapter as its missing a solder point buy the CPU so you need to check your motherboard good luck mate
@djklink2000927 күн бұрын
great video , i still don't find soldering fun or easy 😏unless someone else better then me does it 😗
@TheDiWHYGuy27 күн бұрын
Thanks mate. Yeah not going to lie I'm probably a bad reference I been soldering from 9 years old as the old man had a PC / electronics company when I was a kid but its never to late to learn. The bro Zombie only started a few years ago and now he one of the best I know. Good luck!
@WilhelminaJudith-t4q5 күн бұрын
Gonzalez Daniel White Kenneth Garcia Daniel
@theguy-su3ud29 күн бұрын
nice vid
@TheDiWHYGuy29 күн бұрын
Thanks so much ☺
@baalaagaa28 күн бұрын
Choice bro.
@EatuopLyreqzgj-f5l5 күн бұрын
Brown Lisa Hernandez Steven Williams Matthew
@SinbaGaming23 күн бұрын
damn if u mod ps4's id be happy to send my ps4 in for a mod chip for a video! let me know!
@TheDiWHYGuy23 күн бұрын
Haha sounds like a good time never done a ps4 before what country you in might be a bit risky 😬 with how shipping treats packages 📦 😅
@SinbaGaming23 күн бұрын
@@TheDiWHYGuy I'm in USA lol
@TheDiWHYGuy22 күн бұрын
I'm in France brother it would cost so much and I wouldn't trust the shippers lol but if I find a PS4 I'll make a video for ya, cheers bro!
@SinbaGaming22 күн бұрын
@@TheDiWHYGuy awww thanks. and that sucks!
@TheDiWHYGuy22 күн бұрын
good luck bro and thanks for watching
@magicwolf65112 күн бұрын
I got a question. Can other controllers that use bluetooth or dongle be used on the xbox360 instead of the original controller? My old xbox360 controller is nowhere to be found and I only have aftermarket pc controllers that is based on xbox controller that i use on pc
@TheDiWHYGuy2 күн бұрын
I just tried my PC controller based of Xbox it don't work bro you going have to keep looking for that 360 one...
@h3n7r1kotakuboy428 күн бұрын
Bring back the Blades bro😢
@TheDiWHYGuy28 күн бұрын
RIP ⚰ press F to pay respects 🙌 for blades will be forever missed and never forgotten for Microsoft sellth and taketh away...
@cjpianogamingpcxbox360419 күн бұрын
Windows 7 does Xcode download Edson meo software euewdosne
@TheDiWHYGuy19 күн бұрын
worth a look is it what's it for?
@TylerCristobal-t6s2 күн бұрын
Garcia Maria Martin Helen Hernandez Jessica
@GhostGamer79929 күн бұрын
Will this work on unsupported xbox 360 console
@TheDiWHYGuy28 күн бұрын
Yeah bro it will work but if you have a different motherboard you will need a guide for that type of motherboard to get the right pins to solder the wires to. What is the model number of you Xbox and the input current? I can tell you if it will work.
@GhostGamer79928 күн бұрын
@@TheDiWHYGuy no it's just a question because I heard there some Xbox 360 motherboard can't be hacked but this will be a helpful info for near future
@TheDiWHYGuy28 күн бұрын
Oh yeah your right the lasts ones released that are more square shaped can't be modded so don't get one of those ones. The Xbox 360 Slim all can be and red ring die less than the first models so defiantly look out for cheap slim model. Good luck mate!
@GhostGamer79928 күн бұрын
@@TheDiWHYGuy thanks
@vadnegru28 күн бұрын
@@GhostGamer799very last E models can't be hacked. All slims are moddable and getting a fat, unless it's dirt cheap and Jasper, is not worth it.
@bertosudu95069 күн бұрын
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@TheDiWHYGuy9 күн бұрын
@SophyHarlan-l6s7 күн бұрын
Thompson Christopher Garcia Edward Martin Melissa
@JenGM2426 күн бұрын
Ok...
@TheDiWHYGuy26 күн бұрын
Well its a off line device...
@JenGM2425 күн бұрын
@@TheDiWHYGuy0:22😂
@TheDiWHYGuy25 күн бұрын
@@JenGM24 🤣🤣🤣 thanks for watch bro 😁
@666Roadhouse28 күн бұрын
you speak French?
@TheDiWHYGuy28 күн бұрын
A little bit, I'm trying to learn atm so I put my Windows in French and forgot to put back English before recording this video lol hopefully it wont mess anyone up...
@666Roadhouse27 күн бұрын
@@TheDiWHYGuy no stress man, i was just wondering cause the accent lol. keep going at in bro, youll be fluent alot sooner than you think if you focus on it Je croise les doigts
@TheDiWHYGuy27 күн бұрын
Cheers bro defiantly hard but well worth it been living in France a few years so about time I got fluent haha merci beaucoup d'avoir regardé
@ROARROARROAR-w7x28 күн бұрын
Introducing Scam Box One A breakthrough in scamming innovation. 💯 -Owners of Microsoft 🥴