16TB in an OG Xbox? CERBIOS has arrived.

👕 Support the channel by buying one of my T-shirts, designed by me and made by American Apparel right here in the USA (ships worldwide)
www.BorderlineOCD.com
Shoutout to @ModzvilleUSA for bringing Cerbios to my attention and making this project cooler than my original plans for it.
What to buy for this mod:
Aladdin XT PLUS2: amzn.to/437dcHW (Important: see notes in pinned comment about this modchip)
StarTech IDE to SATA Adapter: amzn.to/3w9Zbdd
3TB HDD: amzn.to/38YvDqM
or 4TB HDD: amzn.to/3OWsBnw
or 8TB HDD: amzn.to/3FvedhN
24" IDE Cable (40-pin, 80-wire): amzn.to/3FnyJAQ
Some other things that you might want to pick up:
Xbox Clock Capacitor: www.mouser.com/ProductDetail/...
Arctic MX-4 Thermal Paste: amzn.to/2Ak2y8w
Plastic Razor Blade: amzn.to/3jmAQLa
Kynar Wire (30 AWG): amzn.to/3KQnySf
Kapton Tape: amzn.to/3DEu0dd
Useful links:
Cerbios Discord: / discord
Cerbios Download Thread on OGXbox.com: www.ogxbox.com/forums/index.p... (v2.01 is on Page 4)
FATXplorer 3.0 Beta: fatxplorer.eaton-works.com/3-...
OG Xbox Installer Thread: www.ogxbox.com/forums/index.p... (click on "Folder link for updates" and download the v1.5.4 archive)
Aladdin installation guide for D0 point: bit.ly/30Wg0tu
Timestamps:
0:00 Intro
7:22 Lubricating DVD & Thermal Paste
12:37 Clock Cap and Modchip
24:17 FATXplorer
27:13 IDE Cable & SATA Adapter
32:45 XBMC4Gamers
36:06 CERBIOS
39:09 Artwork
40:32 Outro

[@BorderlineOCD]

EDIT Nov 21, 2022: *Cerbios v2.1.0* was released today with support for v1.6 motherboards. There have also been many developments over the past months including UDMA5 support for supported SATA adapters. Be sure to get in touch with the Cerbios team on Discord to say hello and get the most up-to-date info: discord.gg/VcdSfajQGK Original comment: As mentioned in the outro, I'll revisit this pinned comment for the next couple of months to address recurring questions that may arise about this project or my experience with Cerbios. Regarding the Aladdin Modchip: there are reports that some newer Aladdin XTs are only flashable using a programmer and will fail when flashed in the Xbox. I have not experienced this yet on any of my recent Aladdin XTs despite receiving the same ones that some folks have reported trouble with (49LF020A). Your mileage may vary so best to be prepared for a potential unsuccessful flash by picking up a spare Aladdin XT or just buying a better modchip altogether. I always flash using Resctoox v6.0 as I demonstrate in this video and have not had any problems (yet). Feel free to share your experience with this as I'm sure it will be helpful for folks trying this mod. I don't recommend trying Cerbios without a modchip (i.e. TSOP) if you're a beginner. Fixing a bricked TSOP wouldn't be fun. Swapping a $10 modchip is a piece of cake. HDD Cluster Size: I chose a HDD cluster size of 512K, even though 2-4TB drives can use 256K clusters and save lots of space when copying small files. The problem with 256K clusters is the directory limit of 4096 files per folder. This sounds like a lot, but many (uncompressed) games have 6000+ files of artwork or sound in sub folders. You won't have this problem when using XISOs. Unfortunately my game collection is extracted from archives and I have little desire to recollect ISOs of all my games. The only downside to 512K clusters is wasted space (1.6TB collection on PC took 2.5TB of space on Xbox). This is acceptable to me because storage is cheap and I just want all my games on one Xbox. Do you have an ISO collection? Hit me up! ;)

[@marcianzero_yt]

The last Aladdin I bought also wasn’t flashable in system. Went for a TSOP mod then. Needed the Aladdin anyhow as the OG HDD had died on me…

[@BorderlineOCD]

@@4ujeff Alas, you likely have one of the Aladdins that can't be flashed in the Xbox (see note above). You can flash it with a programmer or if you don't have access to one you can pick up an Xblast Aladdin XT from ModzvilleUSA which can be flashed directly from the OS on the modchip.

[@jwilliams5857]

@@4ujeff What size BIOS are you flashing?

[@jwilliams5857]

@@4ujeff What model Xbox? Is it a generic "off brand" / knockoff chip?

[@ShiroColdkeyesTheHedgehog]

Do you offer service for xbox v1.4? I was curious how much it would cost? I want to be able to fit a sata ssd; I want to have Original Xbox Live Dashboard installed so I can play on Insignia Live coming out

[@Sekrio]

I was lucky as a kid, My dad bought an xbox and had his friend mod it for me. So many memories playing splitscreen with friends and endless hours playing single player games. The good days of going to a movie rental place, Renting a game then downloading it to the console, It had every SN/Gamecube game as well. I still have it and sometimes start it up for nostalgia. I think my dad realized he had made a mistake when he woke up the following morning to find me still in the living room playing SSX 3 and fuzion frenzy, It was the first all nighter I had ever pulled and can still remember the pure excitement I had when exploring every new game for the first time.

[@tsiefhtes]

This takes me back, although I never modded my own Xbox, all my friends wanted their Xbox is modded and as the only person they knew who could solder I ended up installing mod chips in their xboxes, typically in exchange for a tank of gas and a pizza.

[@BorderlineOCD]

Ahh the good old college days. I've done a favor or two for some pizza and a tank of gas myself, like helping someone move apartments haha. I was a cheap hoe back then. I'm a bit more expensive these days ;)

[@prorace_type_r]

​@@BorderlineOCDto be honest nowadays in my country a full gas tank for my car is almost 80€ so I would do it for that hahaha

[@MrKevin920]

​@@prorace_type_rGermany?

[@prorace_type_r]

@@MrKevin920 Spain

[@MrKevin920]

@prorace_type_r ok, I live in Germany and it's about the same 🤷‍♂️

[@scotter140]

I’m so jealous of this work station. All the space in the world with no clutter. No worry of tagging my desoldering iron cable in my soldering iron

[@kevinfought]

@@FreightmareFTW ma’am this is a gaming video

[@Hoyt1911A1]

This video brought back a lot of memories for me. A little under twenty years ago I was heavily involved in Xbox modding and repair. I would pick up units cheap from pawn shops that had bad laser lenses in them, replace the lens (can you even get those anymore?), and sell or mod them for my personal use. A couple of things I recall about refurbing them is to always pull the power supply and resolder the pins where the power cord goes in. There were so many failures due to the solder joints on the pins cracking that Microsoft sent out free power cords with GFI breakers in them to keep from burning down people's houses. Also as far as temps go I have never encountered the need to redo the thermal paste. I've got a couple of boxes still plugged into our TVs that I've used as media centers for over fifteen years with no problems. I will also mention that the main reason the fans on the 1.0 boxes get noisy is because they are sleeve bearing units. The bearing just wallows out and the fan shaft vibrates. I think on those I just got heat sinks from the 1.6 boxes and swapped them out. Also I found that putting too much lubricant on the gears in the DVD drive actually collected dust over time and caused more problems than dry gears (dust sticks to that lube and the extra gunk would tend to wear the drive belts out). All in all a very good video. It's amazing how much easier the installers have gotten from those days. I kept quite a few large 7200 RPM IDE drives just for these boxes (we don't have a lot of games) but I did tinker with a SATA to IDE adapter one time. I put a 120 gig SSD in there for kicks. It was wicked fast in the menus and loading games. Again I enjoyed the video and the links. I might pull one of the old units off the shelf (I still have several original Xboxes and PS2s left from those days) and try out some of these new tools.

[@yeef3493]

Just checked and you can still get og Xbox laser lenses. Praise vsause.

[@micksterminator3]

Just got a V1 and lubed the fans. It def helped!

[@AidenJoseph]

This man really put efforts in his fixing, next level stuff! He really cares about what he do and that love really shows. Great video man! Keep up the good work! Quality is perfect as usual!

[@BorderlineOCD]

It's a labor of love indeed. I really enjoy the projects so it's easy to go the extra mile.

[@bits2646]

Yeah, I just stumbled across the channel when it popped up in my trending, don't know how I haven't find it before, love the attention to details and precision at work, you can really see who's experienced and who isn't Oh, and I like the F1 shirt :DD

[@fabulousfred5096]

@@BorderlineOCD Hey how much will it cost to make that for someone?16tb hard drive og xbox with games on it.

[@Hellraiser988]

16TB drives are hella expensive lol funny enough if I knew boarderline didn't know about CerBios I would have told him myself on discord he's a nice guy

[@fabulousfred5096]

@@Hellraiser988 if i was to pay 600 or 700 would you make me one with the emulators?and the majority of the orginal xbox games installed on the hard drive?

[@RestorationRelaxation]

Tip for the heat sinks, use a hairdryer to warm them up and loosen the thermal adhesive

[@jaydaytoday3548]

You can also turn the console on and let it run for 10mins and the heatsink will heat itself up.

[@civmike]

Reminded me of when people put there ps3s in ovens todo a similar thing when they got the YLoD lol

[@Roensmusic]

@@jaydaytoday3548 smart one tnx for sharing, using hairdryer probably is useful also especially when its not turning on... btw instead of hairdryer a more ment for it heatgun would probably be what you mean. there are also small heatguns these days better for electronics

[@digitalk68]

additional tip for cleaning old thermal paste - IPA is almost useless as seen in this video, lighter fluid (naphta) is best solvent.

[@RestorationRelaxation]

@@digitalk68 for the OG Xbox, alcohol is completely useless. I’ve always used goo gone

[@daverule83]

You sir have just saved my broken modded xbox from the bin!!! Bloody genius!!

[@WildSeven19]

This was so unbelievably neat and well planned out. Easily the tidiest modding job I've ever seen. And all the game covers, maaaan.

[@just_2swift]

What purpose does modding this do? I'm a noob forgive me. More space but what else?

[@WildSeven19]

@@just_2swift It's basically just for convenience. The increased size allows you to access your entire game library all in one place, on original hardware, without using discs, with shorter loading times. You also might be able to install emulators? But even without that it's very handy.

[@niino4329]

To me, this looks like an official repair job where they replaced the disc drive. Especially since the drive has additional, but seemingly official labels on it and a date of 2003, which would be too late for a 1.0 xbox.

[@BorderlineOCD]

You are very observant. I didn't notice the date sticker on the optical drive. Good theory.

[@husky3g]

I thought the same. That sticker that goes over the top label on the bottom cover seemed to be something Microsoft would do at the factory. No other person doing repairs would bother placing that sticker at all.

[@brkbtjunkie]

Same with my v1.0. It has the gpu fan, single row power and conxeant chip but also a Samsung drive, which did not come with 1.0

[@lpoki8897]

For the heatsinks you can turn on the console for a few seconds and let the chips heat up and that makes it easier to take them off.

[@TheTruthBeToId]

Love it! Love the detail you put into this project. How awesome is that to have almost a thousand games at your disposal.

[@JDLopes82]

Great build from start to finish, both in terms of hardware and then the software and nice to see the final reward at the end. Great work!

[@ModzvilleUSA]

Lovely build my dude! Been working on a 4tb myself for weeks now :D For XBMC4Gamers, I'd recommend looking for the "Fast Game Parsing" option in the settings. Once you tick that on the xbox wont have to scan the games at all anymore and everything will just been good to go once you boot / reset the xbox.

[@Fuzzy-88]

I love it! And to think the Kodi app that I run on my Android players all started on the OG. XBMC 😍💚

[@BorderlineOCD]

Thanks Modz! I'm pretty psyched with this build and my older modded build looks like the ugly step-child in comparison. Good luck with your 4TB build and eager to see your project. Thanks for the XBMC tip, I need to spend a bit more time familiarizing myself with the ins and outs.

[@arcadeslum5882]

Fellas, way back in the day, I remember the KI arcade ports (pretty sure a fellow famous youtuber was responsible for that one) and other PC ports and MAME dumps. Are they unobtanium now on the internetz? Its been decades since I bothered checking and I doubt IRC is still around, heh. Cheers.

[@tatsuo91]

Do you know if the 2 up tb mod can be done in a softmoded xbox?

[@ModzvilleUSA]

@@tatsuo91 no you need to flash cerbios to tsop or a modchip

[@Raflikesmovies]

It was definitely sent back for official service. My original Xbox 1.0 system had to have some work done on it by Microsoft as an official recall. It had the same small square sticker and double sticker over the bottom screws.

[@blindfire69]

Very well done. I enjoyed the patient attention to detail. 👍

[@thedroidmaniac4762]

I didn't even have an Xbox. But I still watched it to the end. Loved every bit. You really love what you do and that's what makes your videos so engaging and enjoyable. Thank for always bringing such quality content. Respect +++

[@BorderlineOCD]

I appreciate that. It's a labor of love indeed.

[@MaxUgly]

@@BorderlineOCD *Thank you so much for this incredible video! I slapped the like, subscribe and bell icon harder than Davie504 slaps the bass! You are such a good communicator and you do everything with love. That build is so clean and you cover every detail down to loosening the screws on the GPU fan. I can't imagine any way to be more thorough. I value teachers that explain the "why" and not just the "what" or "do this". All this while presenting in a genuine, not boring, not trying to be over-the-top funny, gimmicky, or emulating another channel. You deserve more subs. I would not hold it against you or skip over a god awful sponsor segment for Manscaped, Raid Shadow Legends, NordVPN, etc.. You deserve to get paid for the amazing free content you provide!* /Butt kissing over... This is so nostalgic! I soft-modded an OG Xbox around ~2010? It was a later version but I forget which 1.3 or 1.5? I think?... Anyways, it involved hot unplugging the IDE from the hard drive at a certain time during boot. I was very nervous because this is not really something IDE drives are designed to do. I even ran an alligator clip between the Xbox an PC ground/chassis. _I am not sure if this was a good or bad idea as I had (as a stupid 20 year old) decided partying was more important than taking advantage of my full two year scholarship for basic digital/analog EET and dropped out half way through_ I believe the purpose of doing it like this was to catch the drive in an "unlocked" state. It took a few tries to get the timing correct. I then nervously plugged the IDE cable into my AMD Windows 2k PC and booted it up. I may have had to hot-plug there too, can't recall. There was a similar but much more basic FATX explorer program I was able to access the partition with. I installed a launcher (EvolutionX or something?), XBMC, some game ROM images, DSL (Damn Small Linux), various video and audio files at different resolutions, codecs, containers, etc... for testing what that baby could play back. I also installed an FTP server/client on both my PC and Xbox. After re-installing the drive that baby booted up to a beautiful new menu and maybe asked me to configure a few things. *I had the same goosebumps as Borderline OCD! and I have them now as I type this!* *Everything worked! Goosebumps intensified!* I immediately busted out the soldiering iron, cutters/strippers, flux, and heat shrink. Shaking with excitement, I repurposed an old XBOX controller extension cable and USB extension cable into a propriety to standard USB adapter. Now I had a mouse, keyboard, and flash drive all working through a USB 2.something hub! *There are four things I remember being so amazed, proud, excited by:* 1. Transfer everything over FTP. This was my first time setting it up and I think I used FileZilla on the PC. 100Mbit felt so fast back then! 2. I was able to watch the original BBC's Planet Earth @1080p without even re-encoding or anything! I forget the format/container... MKV maybe? 3. I had a full desktop OS with DSL with a working keyboard and mouse! It was no Ubuntu but still was incredible at the time! 4. I was able to play (laggy but still amazing at the time) Mario Kart 64, Super Mario 64, and the *GOAT (imo) GOLDENEYE FARKING 64* through emulation! Emulation of even earlier consoles was like I was on bare metal! XBMC has since forked off into Kodi which is amazing and Plex (also great) even has roots in the source and in developers, I believe. My quick Google search comes up with a lot of people debating about it. I am working on a home NAS. I am torn between Ubuntu Server, OMV, Fedora, FreeNAS, TrueNAS core. I want to run a media server and play around with Apache2 for practicing web developement, Pihole, VM's, etc.. Jellyfin vs Emby vs Plex vs Kodi Dockers vs Jails So many options, so much more research and tinkering, not enough time in a day!

[@igibi011]

For real didn't even plan to watch this and couldn't stop till the end lol. Great video

[@Kiwi_As]

I have 3 of these, one is softmodded, one has the Evo X modd chip and the third one is just standard. They are amazing consoles.

[@AudioHead809]

That’s crazy I got goosebumps right before you said you did when it booted up. I need to do this to mine in the future. Subscribed. 👍

[@zac9181]

I love how he has the same TV that I have, so the intro comes in a second late just like me.

[@ChukkyNuggets]

Congrats for this wonderful mod in-depth view

[@WillZiacoma]

Your work is so clean. I'm new to this level of project having only done soft mods. I would love to see a video or video series on all the soldering tools you use and instructions on how to get such great results.

[@mbaboyyy9457]

I agree

[@snowman5020]

Making it look easy as always. Really nice clean job. Congratulations on getting yourself such a nice XBOX.

[@BorderlineOCD]

Thanks my man. It was a fun project to work on but definitely time consuming.

[@TheStowAway594]

Wow great job! Super clean and tons of great tips, I really appreciate that. Hope your having fun with that thing.

[@jfvira9844]

Great vid! Loved how you showed every step completely!

[@train3616]

Just found the channel and subscribed. Already have a 3tb drive. Now I'm highly tempted to mod my og Xbox. All original with the white drive in it. Just opened while watching to see how clean it was. Now I've gotten the modding itch. Thankfully I enjoy working on electronics and PCs.

[@erniesdeck7550]

I really love this channel I can tell from watching the videos that he has a real passion for what he's doing. And that's what keeps me coming back for more...Great job sir

[@BorderlineOCD]

Glad that comes across in the videos because I really do enjoy it and its a labor of love for sure.

[@sandy60]

@@BorderlineOCD I would love to send you my Xbox to mod for me like you did this one and great video I just wish I was tech savvy to get stuff done like you do but it's very hard to learn when you didn't have a computer growing up. Anyways take care and I'm a new subscriber, no matter how much I watch the video I still will never understand on how to get the job done.

[@davefigore7843]

Thank You ... Probably the Best video and discriptions of covering all the necessary information. First Rate !!!

[@sweetlilmre]

Thank you for this vid. The cable reverse trick was what finally got an SSD working with my xbox.

[@snowman5020]

Really nice work on the video notes, links and chapters too. Some very helpful info there, and easy to get to the relevant section when doing this job. Your videos have always been of a high standard, and this is just taking it to the next level.

[@BorderlineOCD]

Appreciate the feedback. This is actually the first time I use chapters. I don't usually care for them but this video is on the longer side compared to my usual projects so I felt like it was good to help folks find the sections they were interested in seeing.

[@DaftHacker]

Amazing job going through each part with attention to detain, a true perfectionist. This kind of makes me want to build one with a full NTSC game library and an HD video mod to top it off and it would make an amazing complete build.

[@NotAGamer685]

I'm going to do an hdmi mod to mine along with ssd and thermal paste+fan.

[@micflynn1]

@@NotAGamer685 They have a xbox to hdi plug in adapter on amazon

[@theTF2sniper]

Did you get to building one? I must say i bought one with the full NTSC Library of games + Ninja massive Emulator & its been without a doubt my best purchase of 2023.

[@gmetz]

That was pretty awesome. Thanks for the video dude!

[@DamirMaatar]

The video is so satisfying to watch because of how clean of a job you're doing. Keep up!

[@vsilvalopes]

Right after the Cerbios for 1.6 release, I came again to this video, to view your instructions, and everything worked like a charm! Now my Xbox has a more modest drive (1tb) but without the multiple partitions. Flashed it on a standard Aladin Chip just like the one on the video. Thanks for the great content!

[@sporknife123]

Could tell it was a 1.0 as soon as you hit the power button. The sound of the GPU fan spinning up might as well be part of the boot sound for me. Miss those days.

[@Nickhollows]

I’m subscribing to your channel just from this video! Thank you so much from going over this incredible experience. I can’t wait to try this! You rock!!!

[@jestamon]

Epic walk through dude! Great job and keep the content coming

[@garrettkazuma207]

since you have the xbox open, a complete recap of the mainboard and psu is possible. the few capacitors near the cpu which are prone to bulge can be replaced with polymer capacitors for extended service life.

[@wowie2890]

This guy makes the soldering look so easy, he's really good.

[@Phipanjo]

Best mod I have seen so far. Good work, nice skills!

[@philippelafortune2873]

Im so impressed by the quality of this video walk through. Thanks!!!

[@BorderlineOCD]

Glad you enjoyed it!

[@poti1736]

@@BorderlineOCD Hello. What phone do you use for recording if it is not a problem to tell? Thank you

[@MrBoop4345]

Very awesome! I've had my Xbox soft modded for ages. I was waiting on a easier way to get a larger hdd in there and have been teaching myself to solder. I think I'm ready to give this a try. Thanks for a great video

[@BorderlineOCD]

Hard modding an Xbox was one of my earliest soldering projects. I only had a bit of soldering practice at the time and I'm definitely much more comfortable doing this stuff now but I still managed to pull it off even back then. That was also without a desoldering gun and I didn't even have a narrow enough tip for my iron. Bottom line you just gotta get in there and do your best. Sounds like you are motivated enough so go for it buddy and god speed.

[@big0bad0brad]

Big tip, and you can watch Borderline do it in here too, if you remelt and mix in leaded solder, it lowers the melting point of the factory solder and makes it easier to remove. After that it's just down to flux+solder wick (or fine stranded copper wire can do in a pinch)+heat and you should be able to get them cleared out. Another option, but you probably need 2 people to do it, is get one of the spring loaded solder suckers and have one person heat the hole from one side with a soldering iron, and the other person on the other side with the solder sucker. Once the first person has it heated up, they let up just slightly with the soldering iron to make sure they're not fully sealing it off, and then hit the button on the other side and it should suck all the solder out if you had a good seal with the sucker.

[@colinmanton2992]

Followed to the letter and everything is working great. Thanks to you and @ModzvilleUSA for all your hard work

[@escapegoat3472]

So thorough. Excellent work.

[@DECIZ1ON]

Amazing build. Thanks for the well detailed video.

[@kurtmichaels4151]

That's an awesome work, you're a real pro :) I wish I could do stuff like that, it's so awesome to see the entire game library on the dashboard with the artwork for each game.

[@FreightmareFTW]

This world is rapidly passing away and I hope that you repent and take time to change before all out disaster occurs. Belief in messiah alone is not enough to grant you salvation - Matthew 7:21-23, John 3:3, John 3:36 (ESV is the best translation for John 3:36) if you believed in Messiah you would be following His commands as best as you could. If you are not a follower of Messiah I would highly recommend becoming one. Call on the name of Jesus and pray for Him to intervene in your life - Revelation 3:20. Contemplate how the Roman Empire fulfilled the role of the beast from the sea in Revelation 13. Revelation 17 confirms that it is in fact Rome. From this we can conclude that A) Jesus is the Son of God and can predict the future or make it happen, B) The world leaders/nations/governments etc have been conspiring together for the last 3000+ years going back to Babylon and before, C) History as we know it is fake. You don't really need to speculate once you start a relationship with God. Can't get a response from God? Fasting can help increase your perception and prayer can help initiate events. God will ignore you if your prayer does not align with His purpose (James 4:3) or if you are approaching Him when "unclean" (Isaiah 1:15, Isaiah 59:2, Micah 3:4). Stop eating food sacrificed to idols (McDonald's, Wendy's etc) stop glorifying yourself on social media or making other images of yourself (Second Commandment), stop gossiping about other people, stop watching obscene content etc

[@kurtmichaels4151]

@@FreightmareFTW ok

[@EpureAF]

im so glad soft modding is coming back, getting popular again, people are getting interested. the outdated threads can only help so much, you will not find info on all the new stuff. been trying to softmod my first xbox since age 7- finally got around to getting it done and have been wanting to expand on it ever since. thank you for this video

[@justdev8965]

Why 😸 You could be spending all that time ACTUALLY PLAYING games 😸

[@EpureAF]

@@justdev8965 didn't fully understand it @ age 7, plus i never really gave it a full research but now that it's got all the support ima get my time back lmaooo

[@lopwidth7343]

Beautiful work my man. Looks like a lot of care, and should make this xbox last for a long time

[@JoeRetroWorld]

This is by far the best mod video, you explain everything perfectly. Thank you for your hard work.

[@hamsterwolf]

I like the approach you had to modding this Xbox. Very clean and professional and you're one of the few guys that show how to clean the dvd drive.

[@BorderlineOCD]

Glad you enjoyed it! Indeed I think refurbishing the drive is a must on a system this old.

[@omgcool7206]

I love seeing how much care you give to cleaning up such an old "worthless" machine that would otherwise be considered at the end of its useful life. I knew as soon as you opened the functional optical drive that you weren't gonna half-ass anything. You've definitely earned your channel name. Keep up the good work!

[@trailervert]

Love the sound of an xbox case top coming off. Great video

[@NoTySir]

Extremely cathartic and well done video…really tasteful production and easy to follow instructions. Easy sub and like.

[@whollymindless]

All of that work was beautiful. Just amazing work. Electronic Sushi. Art, beauty and functional. Needs to be on a loop in every repair shop to remind people that repairs can be beautiful.

[@BorderlineOCD]

Ha that's high praise, thank you.

[@HeyImGaminOverHere]

That pink gummy stuff is called PCM (Phase Change Material). It is sometimes pretty hard at room temperature but when it gets hot it flows more like standard thermal paste. Acetone is awesome at getting PCM off luckily.

[@BorderlineOCD]

A few folks suggested heating it up will definitely do that for the next system.

[@mrbisshie]

I remember using different stuff to try and get the thermal paste, I spent like 10 mins getting it off slowly. Then I used WD40, and it wiped off like nothing. I was quite astonished.

[@HeyImGaminOverHere]

@@mrbisshie pro tip right there!

[@Vnix]

Excellent build, Im impressed.

[@gonzalo1972]

What a great video! Congrats for you work!

[@Smeerpoets]

Man this takes me back. I think I used a Team Xecuter chip back in the day, messed it up, had it fixed by someone who actually knew how to do it :D It makes me happy that this scene is alive and kicking

[@juanboxplon]

Where are you man? We miss you!

[@Kevin-ke2lk]

excellent video, great explanations, thorough walk thru. Cheers.

[@metalb0087]

its awesome watching this, i learned to install modchips from the written tutorials off xbox-scene and i was aweful with written, seeing it moving always worked best for me

[@y0LAs_]

It's so well executed and explained, that I wanna do it for myself ^^ And I never modded anything yet ^^

[@FreightmareFTW]

This world is rapidly passing away and I hope that you repent and take time to change before all out disaster occurs. Belief in messiah alone is not enough to grant you salvation - Matthew 7:21-23, John 3:3, John 3:36 (ESV is the best translation for John 3:36) if you believed in Messiah you would be following His commands as best as you could. If you are not a follower of Messiah I would highly recommend becoming one. Call on the name of Jesus and pray for Him to intervene in your life - Revelation 3:20. Contemplate how the Roman Empire fulfilled the role of the beast from the sea in Revelation 13. Revelation 17 confirms that it is in fact Rome. From this we can conclude that A) Jesus is the Son of God and can predict the future or make it happen, B) The world leaders/nations/governments etc have been conspiring together for the last 3000+ years going back to Babylon and before, C) History as we know it is fake. You don't really need to speculate once you start a relationship with God. Can't get a response from God? Fasting can help increase your perception and prayer can help initiate events. God will ignore you if your prayer does not align with His purpose (James 4:3) or if you are approaching Him when "unclean" (Isaiah 1:15, Isaiah 59:2, Micah 3:4). Stop eating food sacrificed to idols (McDonald's, Wendy's etc) stop glorifying yourself on social media or making other images of yourself (Second Commandment), stop gossiping about other people, stop watching obscene content etc

[@brorow6821]

I'm watching this video even though I never did anything like this in my life but for some reason I'm fascinated with how you upgrade the gaming system.

[@BorderlineOCD]

That's how it starts. A little curiously. A bit of tinkering. And before you know it you have a backlog shelf full of dozens of consoles in various stages of disrepair. Good luck on your journey ;)

[@unorthdoxcleric6953]

I love how u work. Taking the care not to break stuff and methodical.

[@fairrodthecapacitor]

Love this mod vid, cool stuff! I did not know that new mods were released for it until today. They way the mod came about looked awesome. The maintenance work on this was also great, just look how much dust was in the system. Nice F1 shirt btw 31:00 Voicecrack! Haha

[@BorderlineOCD]

Glad you enjoyed it my man. Now as for voice cracks and echos and background noise... I cared enough to buy a Blue Yeti with a proper boom arm for you guys. I do not care enough to do any audio post-processing so this is the best audio you're gonna get from me. The projects are a blast for me to work on, but the editing is like pulling teeth out and I do not enjoy it. Now more importantly, Verstappen or Leclerc?

[@fairrodthecapacitor]

@@BorderlineOCD Max Max Max Super Max Max Super Super Max Max Max Super Max Max

[@MR82ad]

That load up splash screen and sound effects really takes me back

[@Goazbox]

Just watched the entire vid. Exceptionally professional work. My compliments

[@endingiphone]

Using some heat on the gpu heatsink makes it much easier and safer to remove.

[@lookitskazzy]

Wholly recommend not trying to remove the heatsinks without applying heat first. Either run the console for 15-30m or use a heat gun. Very easy to damage the chips trying to pry them off at room temp.

[@micksterminator3]

For real. That removal clip had my face like 😱

[@BorderlineOCD]

I've yet to damage a GPU, but I'm sure warming up the chip is a good idea so I'll give it a shot.

[@GoTeamScotch]

Yup. Disconnect the fans and power it up for a few mins til the heatsink is warm to the touch (not hot enough to burn you, but pretty warm). Then twist the heatsink off (don't pull straight up).

[@greengohm]

Absolutely amazing soldering job! It's refreshing to see such a skill on YT! BTW I might be totally wrong but it seems like your soldering iron tip might be oxidized a bit. I usually dip it hot in citric acid crystals mixed with pieces of solder wire.

[@BorderlineOCD]

The tip itself shouldn't be oxidized, I clean it after each use and tin it with tip tinner. Are you referring to the shaft above the tip itself? That will definitely discolor.

[@greengohm]

@@BorderlineOCD I think my opinion was skewed by moments like in 18:18. Which is not fair as seconds later the tip was back to being nice and shiny. Ignore my comment then. Well just the part about oxidization - I still stand behind everything else :) Looking forward to you next videos!

[@cb52959]

Such a clean install, nice!

[@saintsrown]

Your professionalism is amazing! Congratulations

[@onedeadsaint]

I don't even have a full TB on my Xbox series x

[@Dumby]

Damn you can’t play mw3 then

[@tomsvideohole8894]

if you close your eyes, the vid turns into Jordan Peterson modding an xbox

[@BorderlineOCD]

Ha, nice one. Now go clean your room! ;)

[@toughnumber]

This is great work man I love it!

[@vietnamesesandwhiches]

I like how this guy has nail polish in his tool-chest at all times. Allways be prepared!

[@Shorkshire]

I feel like I'm too old to begin learning how....well, any of this works. It blows my mind and makes no sense to me how circuit boards work or soldering or anything. Idk. This is so mind-blowingly impressive

[@BorderlineOCD]

I've always enjoyed tinkering but I only started going deep on this stuff about 2 years ago. If you look at my earliest videos you'll see my inexperience and a major quality difference overall. All that's to say if it's something you enjoy, you just gotta spend more time on it and practice. It's not glorious at first but once you have a couple of successful projects under your belt its a major confidence boost. We live in a great time my friend. Everything you could possibly ever want to learn is just a KZbin video or Google search away.

[@jikkme]

I’m 57 and I’m modding Xboxes. Never too old to learn to do something you are interested in.

[@scullc]

Superb instructional video. That system is now amazing. I will look into doing something similar with mine. Great job!! Keep up the good work

[@BorderlineOCD]

Glad you enjoyed it and good luck tinkering with your build. Cheers.

[@johnkosanke923]

Wow. Nice start to finish. *Clicked subscribe*

[@JasonFowler]

Man you brought back so many memories! Great video!

[@javin87]

Gran trabajo, super limpia la instalación y las instrucciones tan detalladas, sobre todo el mantenimiento a la bandeja dvd. Es un excelente video educativo. Gracias!

[@TheSoapyJew]

This is the most detailed mod video with the most concise information I've ever seen. Well done bud.

[@cidadaoPPT]

I’m so glad YT recommended your video. Absolutely amazing content! Subscribed and keep making awesome content!

[@gamebriz4163]

Clean soldering work 👌👍

[@jamesatkinson5991]

very impressed with how careful you serviced this unit,keep up the good work sir!

[@russelldotson1752]

Wouldn't mind seeing a video showing all the tools an organizing bins and chemical storage you use. Love the content but really love how clean your space is.

[@gopherbobz]

Great walkthrough.

[@theozzytubemelendez7282]

i love it!!!!!! great job with everything you did!!

[@datriaxsondor590]

Nice and tidy work as usual, bud. You're right in being proud of that mod work, it turned out quite nice and neat. I actually have a v1.0 system myself, with a 4TB HDD which I have had multiple partitions on for a couple years now. I will definitely be looking into Cerbios in order to clean things up in a similar manner. I don't have modchip though, so, will likely be flashing TSOP, but, should work out fine, I'm sure. Thanks for the video, as I haven't kept up with OG XBox much lately, and I would not have discovered Cerbios without your video here.

[@powderedwater67]

Your setup is as clean as your work, I love it. Disappointed I haven't seen your channel until today. Subbed.

[@thenanook]

Excellent and clean job

[@Dreamerpunk]

amazing job... congrats!

[@Codyflowers3]

That was incredible. I only wish I was capable or even could get one of these! Great work!

[@BorderlineOCD]

Glad you liked it.

[@skjamog]

This was an amazing video. Modding an Xbox with a larger hard drive back in the day was quite a doozy (softmodding w/ ide drive hot swapping) but it was the very best mod experience I've ever had. Thrilling to see that new boot screen and run every old-school emulator/mame ROM I could get my hands on. Thanks so much for this!

[@BorderlineOCD]

I kinda missed out on the modding scene back which is why I almost always want to chip a system even though there are easier ways to do it nowadays.

[@R2_D3]

Yeah that was a nerve wrecking thing!! I remember it well!! Hot swapping the IDE HDD to a PC to extract the HDD KEY, that was only possible if the drive was unlocked by the XBOX when it's turned on. (If you did it wrong, you could brick your original HDD, and an HDD from another XBOX doesn't work due to the KEY linked to the other XBOX...) You also had to copy 2 DIR's from the drive, with a special file manager on your pc.

[@RunnratKeyman]

Very happy. Thanks for the share!

[@BorderlineOCD]

Glad you enjoyed it.

[@stevesmusic1862]

Nice video! You explain what you are doing quite nicely! Subbed

[@DimitriLuinetti]

Thanks. Very nice video. I like your build. Used to have an old XBOX (Crystal) many years ago-

[@abnerrodriguez7954]

Great Job! Love the video you got skills my brother....

[@madkvideo]

Great job! This was one of the cleanest mods I've ever seen!

[@BorderlineOCD]

Glad you like it!

[@deliverencerise6351]

I have been thinking off updating my moded xbox. Thank you for the ideas.

[@nonyabiz9340]

Excellent work

[@los3627]

👏👏👏Great vid my friend. 😎 Thanx!