Xbox One Doesn't Turn On - Completely Dead With No Power Diagnosis And Repair

[@fixnthings9998]

#1

[@TheCod3r]

Noice 😄

[@PhilipBryden]

I do like these short videos where you spend a little time explaining what's happening. Thank you.

[@buckhobbit]

I do as i can watch them while at work on the 2nd monitor lol. The live streams are a bit late for me :)

[@WesMcGee68]

You’re just about the only one I view these days. Really want to try and get started in repairing electronics. I repair everything else.

[@TheCod3r]

Cheers mate, glad you're enjoying the vids. I say go for it, it's always good to see other people getting into repairing electronics

[@neoanderz]

Man people like you are so rare! the knowledge you have is amazing! I have a board like this, no obvious damage, Power supply is good too but wont turn on. I am trying to follow your steps to test it out.

[@aidenoleary7406]

Mate I love this channel. Only came here a couple of weeks ago but the content is fantastic👍

[@TheCod3r]

Thanks mate, some pretty interesting and fun stuff coming fairly soon too 😁

[@arnoolve]

The x clamp remover tool is sold on ebay and aliexpress. Good video, I learn a lot from techs like you on youtube thanks!!!

[@TheCod3r]

Cheers bud, yeah I did get another message about them being on Aliexpress too, so I think I'll pop a link into all my descriptions soon :)

[@StezStixFix]

Awesome job dude, and fantastic explanation of the problem. 👍

[@TheCod3r]

Cheers buddy, much appreciated

[@JoeyDoesTech]

Fantastic video Phil and very well explained 👍👍

[@TheCod3r]

Cheers bud :)

[@2626RM]

I really like this short videos cuz most of the time I don't have an hour to watch a video Even though you're so informative thank you so much I really enjoy your content .

[@TheCod3r]

Thanks mate, much appreciated

[@shanewilliams8768]

Awesome video man! Finally a video that will help with my problems found in a sea of power brick repair videos. Lol

[@TheCod3r]

Thanks mate, glad to hear this might help 😄

[@TravisStamper]

Nice one Phil. Thanks for taking the time.

[@TheCod3r]

You're welcome mate

[@artist_with_dharma137]

Thank you! 😊 I saw a Xbox one for sale at £15 because it's parts spares or repairs.... I thought surely that's an easy fix, and let's get on KZbin.. BOOM and I find you .. Respect for your time showing this fix ❤️💯💪

[@poppyfields3136]

Brilliant vid. I always repair mechanical problems, ie. changed my washing machine bearings twice,, had the front end of my car off to remove the manifolds to fix an issue, but electronics have always seemed mystical to me, like black magic! I might give this a go, thanks.

[@archangelshiro]

EXTREMELY useful video, you seem to be really good at this- im teaching myself minor board repair stuff and ill be checking your other videos. Thanks so much for posting!

[@rubenisbeter]

Great vid ! Question: my Xbox doesn't turn on, but also the USB-ports don't work. My power brick has an orange light, doesn't change when I plug it in the console.. took it apart now according your video and need to test the mosfets now. What could it be??

[@stoptheplanetiwantoff6906]

I have an original PS3 60 gig fat console and that is never let me down at still goes to this day.

[@MrReeceyburger123]

I always check the PSU bricks on these for bad caps and clean the dust out of the fan too.

[@soulmourne2698]

They send you a ton of og xbox ones with no power that have a bad mosfet, very good video :)

[@TheCod3r]

Haha yeah these are easy money 😁

[@gundam654]

What is the name of the chip that you replaced and where to get it at? Thanks

[@chrisdutch3013]

It's not a chip, it's a MOSFET. Part number is TPN8R903NL per the audio at 10:36. (Had to listen to it like 10 times to get it - he says it really fast) Hope it helps!

[@Noliandertbryan]

That was super helpful! Thanks so much!

[@delilah022809]

can you explain how you tested for the short using the red and black probes? Not sure how to test for that

[@markboulton2917]

same here, I am getting totally different values in Ohms not volts???

[@paulm8754]

May I ask what microscope you use

[@baistosh]

bro..im new to basic soldering..what is that white stuff you use to solder the mofset chip..is that flux? what kind?..nice to see your list of materials you have..love your channel

[@TheCod3r]

Yes it's flux mate. Depending on the job I'm doing I use different flux. For basic tasks like ports, surface mount components and through hole I use kingbo rma-218 which is cheap and cheerful but won't corrode the board. For BGA I use MG Chemicals no clean :)

[@baistosh]

@@TheCod3r thank you..will order that as well

[@mattywatson7075]

awesome video coder keep it up

[@rorykelly8275]

Hi Phil. My motherboard is different to the one you are working on. Mine is the 1540. Can you do a no power video on that revision please? Many thanks in advance. Rory.

[@leepowell24]

Can you advise on heat gun, i need to sort mine, cheers

[@leepowell24]

Thank you for you videos btw

[@felixr6307]

Nice work! I am going to try and resurrect my Xbox one. I think the fan died and it cooked itself or the power rail. This will be my first repair.

[@braveanxiety2107]

Where can i find a new power supply port mines is broken?

[@distort89]

Is that the same mosfet that's used on the xbox one s also?

[@TheCod3r]

It is bud, the TPN8R903NL is used on the original and S :)

[@distort89]

@@TheCod3r thanks so much. I love the videos keep em coming mate. You do some great work.

[@SheGo3seven]

Soo I’m having a issue with my Xbox where it pings like it wants to turn on but very faintly the brick light is orange and stays solid orange even when plugged into the Xbox and trying to turn it on Xbox doesn’t light up and orange light doesn’t blink or change white just solid orange

[@larrycaruso3246]

What ended up being the issue

[@joshuahuss1892]

Nice video. I checked the mosfets on mine and that is not the issue. What could I check next? Power supply confirmed good.

[@themicrowaveman3337]

This happened to me yesterday but i have no way of fixing it but one difference is my power supply just stays orange

[@ezzmonster84]

I’ve got an Xbox one S I bought for the case and hard drive, however wheni bought it used off eBay for parts and it beeps but doesn’t turn on, do you want the parts? As it has no case and no hard drive not much else I’ll use, it has a disc drive but not sure if that works.

[@TheCod3r]

Sure, if you have no use for it I may be able to make a video on it :) Feel free to drop me an email, [e-mail] :)

[@roblayton6313]

Hey Phil, love your videos, this one on particular. I have board that has no power what so ever , plug in the charger the power just stays orange. Tried power brick into a different Xbox and it works fine. Tested the MOSFETs and there doesn't seem to any shorted. What else should I be looking at?

[@TheCod3r]

Thanks Rob. It's hard to say really but you could start by checking your standby voltages. Around the board you'll see stuff marked 1.1v, 1.8v, 3.3v, 5v etc which will be your rest points. The ones you need before the console is powered on are ones marked with "SB" for standby. If you checl out my discord server there's a lot of smart people who could walk you through the process discord.gg/Rr2MTveqJk

[@NikyRipy]

Hi I have a similar problem: The xbox one 1504 don't turn on, but if I press the power button it emit a beep sound. The orange light of power supply still orange and never turning off (So I suppose don't think there are any short circuits on the board). But I don't know how to solve it. Can you help me, please? Thank you

[@BrianTheTrader]

All 5 MOSFET are 0.6. I used a known good power brick. What else causes no power?

[@luiskaba3246]

Can you make a video about voltage injection (how to inject..which points to use) pleaseeeee

[@Laevatein9521]

What should the gate driver read if it’s good? Also, do you know what the black chip is next to the mosfet(left side)?

[@relaxationmoment3023]

What is the name of that liquid and what does it do

[@markleodeleon3916]

Hello. I've got 0 experience in repairing consoles but what happened is that my xbox issue is definitely like yours. The power supply turned on but I plugged it on the xbox it turn off. Can I do it myself? what are the of the parts / mosfets you mentioned to be replaced?

[@chrismagallanes8858]

So I have a Xbox one that doesn’t turn on cause of short I do not see any damage to the resistants will reflowing the motherboard with a heat gun work?

[@sidvtec]

Would this method work for an xbox one that turns on then off after 5 seconds? Ive renewed the power cable & the hard drive with cables and still the same issue?

[@robertmason8229]

Idk if I can explain this to u but I'm thinking mine has same problem not the gate side but I believe you called it the dump side. I have continuity on the first three chips but the last one is .092 on dump side but the gate was good same as others. The bigger chip to the left where it should have continuity it has .092. so it has shorted somewhere between the c and d on the board I believe it's the same chip u replaced here but in the d part of board. But my question I guess is how can I follow the flow of electricity from part to part? Like how can I figure out where it goes from from one point to another to another? Please help

[@spikeshibles2640]

I like your vids very imformational. i do have a problem with my xbox one and am hoping you can help me. I do a little electronics on the side and have been learning a lot. so where the NCP4204 is on the bottom left toward the letter C is some capacitors microscopic it looks on mine as where someone put the wrong screw in so it hit the board and took out these capacitors i woulld send you a screen shot if i could. But i would like to know what size capacitors go in there so i can replace them. thanks in advance for your help.

[@jacklemke3325]

You said you put red probe on ground then tested with black, where exactly were you grounding to when testing the mofset’s?

[@rubenisbeter]

I'd like to know this as well

[@wesss9353]

top of the power cord socket

[@nicholasprashad4147]

@@wesss9353 does the power have to be plugged in while testing?

[@ngonohtc5724]

​@@nicholasprashad4147no

[@sirstitchesmc5738]

where do you find ground

[@TheCod3r]

There are ground points all over the board. The easiest place would be the metal shroud around the ports

[@Mr.Eldric]

A Chinese take out meal? What the hell Phill? Get yourself a large Donna Kebab, pot garlic, pot chilli 🤤🤤🤤. Lovely. Infact i will have one tonight and dedicate it to you😂

[@TheCod3r]

Ah damnit I'm bloody starving at the minute too, thanks for that 😂 been on the road since 8am, got back at 6 and not eaten a damn thing yet haha

[@mattjones3202]

I've tested all the parts mentioned in the video and I'm getting .65 .64 basically on every one....any other places should I check?

[@oOignignoktOo1]

I had this issue before on a friends xbox it turned out the issue was with the power supply. It had a shorted transistor that feed power to the 12V rail. Once I replaced the transistor the console started working good again.

[@EavannFernandez]

The fixing process is easy, but finding the parts is the hard part😅 had my Xbox one 1540 broken for a while, same problem which is a short circuit on the mosfets, same component as the video that is producing a short, but the hard part is that i cant find them anywhere and the harder part is we live in a very far away country. I must do something i cant just let my xbox one rot away, it had fh5,gta5,gta5,wd2,rdr2,rdr1,fc5,fc4,fifa24

[@pakoakwa7032]

Love Your jobs :)

[@wadesmith5475]

Im completely new to fixing physical components im more of a software developer but i just would like to ask if you dont have access to a hot air gun what are some safe ideas one can use to get the chip removed and reseated with a new one , sorry for being a bit of a noob but best ask then make a mistake

[@Coryh22a]

I have a first gen Xbox one and it just started this today, it will beep and try to come on but will not power on, what could I do about this? I’ve tried all the resets

[@TheCod3r]

It sounds like an issue with the board mate. You'd need to go through checking for liquid damage as well as check power rails etc to figure out what component has failed on it

[@menedzmajbiz6950]

Can you help me. My Xbox One Original went to Sleep Mode running in background. I've turned up Xbox and fan is not working. It just tries to start spinning but it looks like it doesnt have enough power in it. To me it looks like he is still in sleep mode but it isnt. I've tried to reset xbox thru "menu", not troublesboot, by reseting keeping apps and games. It doesnt help. Can you help me please, I know fan is working 100% and I've cleaned whole xbox, not touching motherboard. Thank you!

[@s3anuk]

thanks for the video. mine had the exact same issue, but each time i fitted a new mosfet it blew it again. pinouts seemed to measure all fine before switching it on so im stuck :(

[@chrismagallanes8858]

How did i check which one is bad

[@user-bs1ht3qq2e]

My PS4 as a the cable for the power supply was in the motherboard burnt and no power and could someone help me

[@stevenmalden7677]

Good stuff thank you sir

[@alextimes8108]

Hi, i'm form Malaysia - Kuala Lumpur City , my Xbox One console no power can you fix it?

[@REMEDY-REPAIRS]

Bro I wish I was living closer to you 😭 have a lot of PS4 with BLD

[@TheCod3r]

You could mail them in to me if you need them fixing :)

[@dkaytan]

Like when you actually tell what Component does what etc.

[@neddy1287]

I got an Xbox one 500gb same one in the video it chirps but the power button led flash once power brick goes from orange to white then back to orange. What is the causes?

[@TheCod3r]

It's hard to say when it makes a beep, it could be lots of different things and likely needs diagnosing properly

[@neddy1287]

@@TheCod3r This one is abit weird as when the xbox one is completely cold it flashes power light for a split second with a beep. But when I warm up the xbox one on the radiator it will turn on for 5 second then shut off. There's power going through the board. As for USB it charges my phone as soon I try powering on the xbox one the usb power dropped out. It abit of head scratching here

[@sanjinhovat2697]

Hi please help, I changed on xbox one x hdmi port, esd Booster ic chip and ic reitemir chip but it doesn't work 4k why is it possible to fix it thanks

[@wesleymons698]

Can i ask my xbox has no power but on the powerbrick it shows only a orange light what do you think its wrong?

[@TheCod3r]

It's hard to say, it would possibly need looking at and diagnosing if you don't have the equiment to do it yourself. I'd say try a new power brick first though

[@wesleymons698]

@@TheCod3r thnx for the answer :)

[@martinberlanga4914]

All mine checks out any other ideas?

[@TheCod3r]

It could be a few things to be honest. The next steps would be to check your test points which are marked on the left side of the board to see if any power rails are missing

[@martinberlanga4914]

@@TheCod3r I'm new to this so where exactly would that be on the board? Everything seems to be there I have the exact same board that you have in the video

[@princetyv]

What that oild name bro

[@jessicafreeland2991]

My brick still is orange but my xbox won’t turn on at all it doesn’t make any noise or anything it just doesn’t turn on but the brick stays orange

[@steelsandport3613]

When can you fix an Xbox one brand new, don't know what is wrong with it.

[@GamerPro20118]

I can't 😢😢

[@ForgeOfEmpiresPolska]

And, if MOSFETs are good, but there's a Beep on-off, what would be the next step? :)

[@dakotahadley1219]

What if the power supply stays on but the Xbox isn't responsive

[@grif3278]

Mine just stays at orange

[@modlauryofficial6603]

I have this same problem on my Xbox one S

[@kutestonur]

my xbox power bank doesn’t turn off, but my xbox one doesn’t turn on when it’s plugged in.

[@ititaniuivixx1127]

I guess you would need a hot air gun for this job. Can I just use a soldering iron?

[@TheCod3r]

It would take an awful lot of work to remove the damaged components with just an iron. It's possible but I wouldn't recommend it since it stands a good chance of damaging layers on the board

[@ititaniuivixx1127]

Your right I think I damaged the board of a controller I bought with lots of issues trying to fix it. I just couldn’t find the issue. It was the old controller without a audio jack.

[@kaiah5845]

My xbox one mayb is the same problem .....

[@freevideos051]

Lol don't buy from E bay you get ripped of. I agree

[@preddy2940]

N1 M8

[@KeithPotts]

Nice video sent you what's app message

[@TheCod3r]

Cheers bud I'll take a look later on, phone is dead lol

[@TuCu1999]

boss

[@m1rock]

Mine just died but the power supply shows its working just fine but for whatever reason the console just wont power on at all. My xbox 360 Died at the same time too! Boots up and hangs at the gray screen with white circle. Talk about a bad day.

[@kutestonur]

did you ever figure it out? my power bank isn’t turning off when it’s plugged in (steady orange light) but my xbox one isn’t turning on

[@tuck6464]

I have an Xbox 1 with similar symptoms, but my moffsets Q9DI, Q9D3, Q9D5, AND Q9E3 , where you were getting 0.39, I'm getting .466 on all of them. ?