[XBOX360 ] HOW TO FIX WIRED CONTROLLER CABLE

HOW TO FIX WIRED XBOX360 CONTROLLER CABLE EASILY
You can support the channel on : www.paypal.me/WeekTechniques
The tools used :
1. Scissors
2. Side Cutting universal
3. Soldering iron
4. Desolder pump
5. Solder wire
6. Screwdriver
Do not forget to like and subscribe to my channel ⁦☺️
--------------------------------------------------------------------------------------------------------
Music Song : Ikson - Skyline
• Ikson - Skyline (Vlog ...
Music Song : New Land - ALBIS
• New Land - ALBIS (No C...
---------- ----------------------------------------------------------------------------------------------
Other Videos :
PS2 GAMES ON USB STICK | FIXED BLAC K SCREEN
• [PS2] GAMES ON USB STI...
PES 2018 FULL GAME DOWNLOAD | PS3 | XBOX360 | PS4 | PC
• Video
FIFA18 FULL GAME DOWNLOAD | PS3 | XBOX360 | PC
• Video
---------- ----------------------------------------------------------------------------------------------
Tags : #xbox360 #controllerrepair #xbox
---------------------------------------------------------------------------------------------------------
➤ Facebook page : / weektechniques
---------------------------------------------------------------------------------------------------------
~-~~-~~~-~~-~
Please watch: "[PS2] HOW TO ADD COVER ART TO OPL"
• [PS2] HOW TO ADD COVER...
~-~~-~~~-~~-~

[@kebutugaming9872]

because of this video I had the courage to buy a soldering iron and fixed 3 controllers. kudos to you brother. thanks

[@WeekTechniques]

Very well done

[@eastongordon9046]

i know it is kinda randomly asking but does anybody know of a good website to stream newly released movies online ?

[@armanijamal9712]

@Easton Gordon Flixportal :)

[@eastongordon9046]

@Armani Jamal Thanks, I signed up and it seems like they got a lot of movies there :) I appreciate it !!

[@armanijamal9712]

@Easton Gordon Happy to help xD

[@LuisMendez-up5te]

This is a common problem. To save money, manufacturers use the bare minimum in wire. Cheap, thin wires means you either buy a wireless controller or keep buying wired controllers every 6 months or so.

[@mushroomcrepes4780]

yeah my controllers wires are so short now because over the years i've cut them 6-10 times

[@LuisMendez-up5te]

@@mushroomcrepes4780 I think you can use any old USB cable.

[@LuisMendez-up5te]

@@Fazer_600 ohhh, I didn't know that. Thanks!

[@gilangpratama1806]

@@Fazer_600 like can you use 2.0 usb connector cuz mine is broken not the cable just the connector?

[@L.NEVER.LOSES.]

nope wireless controllers analogs r bad

[@lisandru2628]

Thank you so much for the video. It was my first time trying to solder anything, and it took me way longer thant I want to admit, but my controller is now fixed and working.

[@Tigroo]

I have to repair mine too. Thanks to this video I think I'm gonna do it 😉

[@jewblin5305]

I’ve had mine for like 8 years or so. The controller is perfectly fine just the cord broke. I was about to buy a new gamepad but thanks to you I’m repairing the old one. I forgot I have a soldering iron.

[@blackbobjo]

Thanks. I never would have attempted to do this. Thanks to this video the controller works again 😂

[@904nighthawk]

very nice, i had thought of this solution while i was laying down, but this confirmed it and made me very happy, thank you for the detailed and straight forward video.

[@DontFuckWitDreDay]

Thanks helpful video!! Also awesome 👌 you included the name or the music on the description.

[@lurkerrekrul]

[Not shown] Soldering the new wires into the holes. [Also not shown] Re-soldering the rumble motor wires after they break off due to all the flopping around.

[@HerecomestheCalavera]

They really should have made the cord to plug in to a connector on the board. I've got several controllers that have no apparent damage to the cord but constantly disconnect and reconnect. If you tape the cord to the back of the controller in just the right way it will stay on but it is a very annoying problem. I'll probably just cut the old one off and wire in a regular usb cable from an old printer. 360 is the only controller I've ever had this problem with.

[@kanalkanal2672]

What's called the xbox 360 controller cable

[@nevertrustCHEEZ]

Great video. Helped me out a lot.

[@slendydie1267]

Since you can do that multiple times if its just the cable(probably wont have to more than twice in the lifespan of the controller). But maybe you have someone or something that ruins your cables and you do it often. If you dont want it to become too short you can remove less insulation and solder wire to wire if you feel comfortable. If you do that you should buy heat shrink.

[@wyLdchyLd5p6d]

thanks a lot for this Video, i opened my Controller but I didn’t know they were soldered. Will have it fixed by today

[@RomualdFlibustier]

Exactly what I was looking for. Xbox 360 may be cheap today, spending 20€ where a simple solder here and there could do the trick is a pure waste of money. Thanks for your guide 👌

[@jeoffer]

Hi thanks for the video, you saved me $40.

[@7Prayoga]

thanks dude, it really help me

[@melihdurcak8450]

thx a lot this video really helped me

[@Felipemelazzi]

4:10 Do you see that thing that he put back on the cable? Yeah, don't put it the wrong way as I did 😅 Thank you for the video!

[@Pixelon_]

hi what is the gell like stuff you covered the wires in at the end

[@CostcoDunkin]

Mine has a white clip holding the four wires in. Looks like this one has been repaired before. Was is already removed? Do you break it off after you use the solder remover/plunger? (I use solder wick at work.) Or does it come right off?

[@felipebrasil5]

great ! i have a nacon padron so there is the yellow cable but i guess it's no use... so can i just skip it? the usb - C has it but the original cable doens'nt...

[@sLudwig]

saved me 60 bucks. thanks!

[@SoyJuanManuelChannel]

I try to do the very same but i think i burn the card, my experience on soldering is null.

[@davidmalcolm7143]

Good video, but what was the liquid added to the soldered connections at the end?

[@DannyGaytan04]

Looks like hot glue.

[@HitBoxMaster]

Did he melt the solder on the new wiring after he added that drop at the start?

[@carloola4398]

Did you remove or adjust the choke/ferrite?

[@igano111]

Nice, clean video. My controller was disconnecting every few seconds but there was no visible damage on the cable. I freshened up the solder joints of the cable connector on the board and whadaya know? It worked :)

[@SkylordGuthix]

I'm going to have to try this one I think, have the same thing. I've taken the controller apart and no visible damage.

[@aliuzashi2786]

nice and satisfying

[@monster_hunter190]

Nice job

[@YeetoTheYeetafic]

how long does the soldering wire have to be

[@AnarickTheDevil]

Mine is broken inside the shell or something as it freeks out when I wiggle the rubber bit that is messed up in this video.

[@stereotypes3755]

Something metallic wires came out from the hole of the wire is this the problem?

[@guyh3403]

Only for it to break again since Micro$oft decided to use cheap cables to begin with. I'll give it a go.

[@vercr0w]

Couldn't have said it better myself.

[@johndoe-gw6tj]

You don't have the 5th wire ... the metal shielding wired ; is that not needed?

[@battle4feildgaming963]

I found a wire replacment how do i replace it

[@serpico1616]

Controller just stopped working while I was playing a game last night. I thought it was the cord simply because of how long I've had it. Cut out the section I thought was bad, soldered the wires back in and plugged back in... still didn't work. Tried it on my laptop, it then worked.... So I restarted the first computer and surprise, it worked. SO after all that, all I ended up doing was wasting several hours plus unnecessarily shorten my cable by a few inches lol Stupid computer. Thanks for the video nonetheless!

[@Drwaleed320]

Does the arrangement of wires necessary or not??

[@Jono793]

Yes it does! Pro tip, take a picture before removing the connector from the board.

[@BTWTechGaming]

i need help. i did the same but my controller wont turn on. it was working when i cut the original cable and added a replacement without de soldering it. please help

[@WeekTechniques]

Use the original printer usb cable. like this : www.rework.network/products/original-dell-printer-usb-cable-usb-2-0-a-b-male-1-5m-black-with-magnet-ring-ship-from-china

[@mdmosiarrahaman6323]

pls tell me how do i prevent this, it is new at the moment

[@carlislehignett2510]

best video ever

[@IND4GR0V3]

fake controller tho

[@l1mewaxer]

Hey, you don't seem to have a plastic thing around the wire right next to the controller. Is it safe to cut it off completely?

[@hamburguesa33]

I´m in the same situation. Did you figure it out?

[@l1mewaxer]

@@hamburguesa33 Hey Putin, I still have no clue about the plastic bit. But while trying to fix the wires, I completely fucked everything up beyond repair and ordered a new controller.

[@hamburguesa33]

@@l1mewaxerohh hahaha okey, thanks for replying either way. Enjoy the new controller i guess

[@finn3494]

It should be ok to remove as I believe it's only a passthrough but be sure to get the order correct when putting new wires on.

[@paultomlin8278]

Awesome thanks. Video could have been a tad better but overall good job. I've been looking for something to fox for my otg cable when it gets here. I made an otg cable but it keeps shorting out probably because I'm not the best with solder. Honestly I got an otg cable to initially turn my phone into a sort of half assed laptop or desktop. May piss some call of duty players off but it's all in fun and seeing what I can make technology do that most don't realize. I mean hell have you ever hooked a floppy drive to a phone. It's fairly useless but fun

[@MikeleKonstantyFiedorowiczIV]

do you know they use copper or aliminium in to wires?

[@MikeleKonstantyFiedorowiczIV]

its aluminium if somebody care, i tested it

[@naaznkv8958]

Bro It is AV cable in my gamepad... How to convert it into usb cable... .

[@NLT31]

Have you ever tried taking a broken wired controller which felt good in your hands and taken some of the components out of a wireless and converted it over to the wired? In other words have you ever tried to take a wired controller and tried to convert it to wireless? Thank you.

[@WeekTechniques]

no

[@Skoden.Stoddis]

I need to fix mine. However, I do not have the materials to do it

[@artorias550]

Why zip tie at 6:55? Is this necessary?

[@gilangpratama1806]

Hey i need help.can you using another cable or usb connector for xbox 360 controller cuz mine is broken fast respond please

[@gilangpratama1806]

Like can you use any 2.0 usb connector

[@BenLCarter96]

I tried this and now it keeps blinking/flashing and won’t work on my Xbox. Have I messed up the board?

[@116Patrick]

4:42 can someone please tell me what he is doing and which both tools he uses?

[@jugg9140]

wired xbox 360 controller pc keeps connecting and disconnecting by itself, after power spike, does this mean the cable is damaged?

[@WeekTechniques]

wired controller or wireless ?

[@jugg9140]

@@WeekTechniques wired lol, also the thing is i don't think it is broken/short wire issue because we hardly use it or move it around, i don't unplugged it from computer while power spike occur

[@harry1995ification]

Mine did the same so I used a cable wire tie thing (those twisty ones you always find on new cables, or just bread package) Tied it up at the top in way similar to this video: kzbin.info/www/bejne/fpm9kHmtmd2CqcU In short you have to find a way to keep that place always bent. Doesn't disconnect anymore, it worked. It eventually led to the breakage of the cable due of the constant bending (I mean that's why I'm here now) but that's another story. Let's just call it a temporary fix. See if it helps. PS: I just didn't attempt to fix my old controller and just went straight buying a new Xbox One controller instead, it can work both wired and wireless, so the wire is removable and can be replaced easily, any micro-USB cable such as the phone charger one would work. But it isn't cheap.

[@skanderseyhi8745]

I have the same problem but the USB Wear u put it in Xbox it got cut off and thé USB still in thé Xbox

[@joyislam410]

My Controller Port is damaged not cable, How can i fix it ?

[@chilledoutbob]

At 6mins what type of glue / resin is being used to blob over the newly soldered in wires? Cheers to anyone that can asnwer that.

[@ryokea]

More than likely just your standard hot glue. It's only there for a bit of support and typical hot glue isn't conductive.

[@t0t0]

omg i have the exact same screwdriver.

[@crazycraigy01]

right where mines freyed..twisting it all the time...

[@marcsugi]

I don't solder it, just twisting the cables and put electrical tape on it. done

[@HerecomestheCalavera]

Same here. There really is no need to solder it, the electrical tape is going to stay in place basically forever.

[@hypnotoad28]

@sillycliff512 It is if you're broke and have no soldering gun

[@xxaskcodmodzxxmodz3739]

Can u do camo snakebyte PS3 controller fix for PS3 please

[@sleepwalker29]

I fixed mine in about 10 seconds without taking it apart. It also had a broken red power cord I tested with a meter.

[@lilz7963]

I need help

[@ankm2622]

why would you cut some parts of the video out???

[@lilz7963]

I need help to fix mine can somebody show me how to do this pls 😢😢

[@aikqnextgeneration]

If my board are burn it cannot use anymore right?

[@WeekTechniques]

yes

[@aikqnextgeneration]

@@WeekTechniques I just destroy my controller my bad lol

[@sgt.scrooge4998]

Decent tutorial. Missed some key details, and the background music is considerably distracting. People who are watching a man fix a controller don't expect or necessarily want to hear royalty free electronic music that's better suited to an ad on youtube or a gaming channel.

[@samwelimugisha289]

i know ho to fix it but i do not have the tools to fix it so pleas give the tools to fix controller or you can mack a easy way how to fix it but it maybe

[@JohnnyOrgan]

Read Marchel Sugi's comment. Cut as in video. Rather than solder, leave the wires on controller board. Feed wire through the clamp part, then trim and expose copper wire attach and twist wires together (red with red etc). Wrap in electrical tape. Finish job. Have a cuppa and play some games.

[@deadchannel9720]

Mine is ok, but the windows keep saying the usb is not known by pc , installed all drivers again and again... Hellppp pls all my saved money goes to this controller

[@RideTheGamer]

What's up broo.

[@mrsillywalk]

When you cut back on the cable ALWAYS prove the connection to the plug. There can be more than one fault on a cable.

[@EvilCassus]

Looks like his is not original gamepad. Or very old 360 pad model. Be aware

[@peloncito707]

Well good if you know how to solder if you don't then you have no clue lol good job though 👏

[@Skankhunt-ep1re]

this is what happens after you play fifa XD

[@asuriontech854]

Nice that you didn't include the type of screwdriver bit needed. Be more specific about needed tools

[@finn3494]

Philips

[@asuriontech854]

@@finn3494 no it's not. Not on an official xbox 360 controller

[@RedScare90]

@@asuriontech854 yes its just a small phillips.

[@asuriontech854]

@@RedScare90 officially licensed 1st party xbox 360 controllers have security bit screws in them not Phillips .

[@biscoitom]

@@asuriontech854 Wired ones (those with the breakaway cable) actually have Phillips head screws.

[@haloharry97]

somehow i broke 2 of my controllers fully ;(

[@BlazenWinchester]

Get yourself a wet sponge for proper solder tip cleaning and do without the cheesy music, otherwise nice vid.

[@user-ps7ut2bc5m]

I'm crying cause my wired xbox one controler is broken I can see the wire inside

[@ValExp543]

The xbox wired controller is a huge scam, I have a gamecube controller that has zero problems since released on the market

[@LukeMM95]

Microsoft has always had naff build quality.

[@noahcaudillo4756]

Okay this didn't work now time to go do the 101 video I can find how to fix this

[@IND4GR0V3]

fake controller in video

[@IND4GR0V3]

everyone looking for a proper cable fix video this is not the video to watch this is a fake controller

[@gabrielegenota1480]

Make a vid and make a face reveal i sub

[@DjGeorge124]

why are you wearing gloves ?

[@WeekTechniques]

What's strange about that ? To protect my hand only.

[@lmulligan6969]

Why in the fuck does everyone where gloves when its so completely unnecessary.

[@user-kq4wf7pm1u]

Fake controller

[@FabianvonFebsiTV]

The music is so anoying

[@IND4GR0V3]

this is a fake controller

[@andromedasriddle9587]

Hatem music on videos especially when it's fking awful

[@fisnikg5506]

Fake

[@finn3494]

Lmao what's fake about this

[@IND4GR0V3]

@@finn3494 the controller is fake

[@SoyJuanManuelChannel]

I try to do the very same but i think i burn the card, my experience on soldering is null.

[@LuisMendez-up5te]

I was the same when I first started soldering. It takes practice.

[@aikqnextgeneration]

Me too It doesn't easy as they do.