XIAOMI M365 PRO 2/3 BRAKE ADJUSTMENT - Time For Check Up

Xiaomi M365 Pro 2/3 brake adjustment is what I go through in this video. The rear brake on on the Xiaomi can cause problems such as disk rubbing noise and insufficient braking. I show you 3 points to adjust on the M365 Pro in detail and walk you through in detail.
⚡️ WATCH NEXT
🛴 Xiaomi videos you must watch: • Important Videos To Wa...
-------------------
🔹 My tools, riding gear + upgrades movelectrics.com/gear-list/
🔷 My scooter support FB group: bit.ly/2NMeXIY
-------------------
Sound effects/Music Licence: www.epidemicsound.com/?BuCBWf...
Get Epidemicsounds here: bit.ly/2WglTia
This video is original, made by myself and I go through a detailed process of shooting and producing original content. All opinions I share are my own.
DISCLAIMER: As an Amazon Associate I earn from qualifying purchases.
DISCLAIMER: This video and description might contain affiliate links, which means that if you click on one of the product links, I'll receive a small commission at no additional cost to you.
DISCLAIMER: Always consult your doctor before using any products that are reviewed or mentioned on this channel.
DISCLAIMER: The creator of this channel will not be held responsible for any damages that could arise from acting upon the information that this video contains. The video is for information purposes only.
***My website: movelectrics.com
***Business email: [e-mail]

[@Movelectrics]

⚪️ WATCH NEXT 🛴 Xiaomi videos you must watch bit.ly/35hyUfm 🛴 Xiaomi M365 Pro upgrade videos bit.ly/37mWNoI 🛴 Xiaomi maintenance videos bit.ly/31nxsH9 ⚪️ Product links in description if you want to upgrade your scoot!

[@dodgydavy]

All of these videos are such a great help. Bought a lot of accessories recommended and saving the videos for future reference. Thank you

[@Movelectrics]

Thats great Dave! Thanks for the comment! Much appreciated! Yeah I think if you buy 1 upgrade, you will buy many more!! Safe scooting 🛴

[@michaelross7153]

Thank you so much! My rear inner pad was rubbing hard and was really showing me down. You got me back on track in 30 mins. New subscriber. Cheers Man, one love Brother X

[@Movelectrics]

No worries Michael! ⚡️

[@k-l.l6281]

Thank you! Best video I've found on this. This video was simple, explanatory and easy to follow! Been nervous driving my Xiaomi cause the brakes have been too loose and the first video I've tried to follow just made things worse. Following this vid made me able to understand what different parts of the caliper does and so when I was to adjust my brake I knew how to go back and readjust to get it all perfect. Now I can screech with my back tire 😉 10/10 WOULD RECOMEND!

[@Movelectrics]

Thanks Luddy for the support! Brakes are vital alright!! 🛴

[@kaoulkae]

I went from never stopping (only slowing down with stock brakes) to wheel burn (I now have to put my weight on the back to brake because it is so strong). Thank you very much for this very informative video. I learn many things and my stock brakes are working much much better.

[@Movelectrics]

No worries at all! Scoot safe 🛴

[@burakhansivri4174]

Another useful video. Thanks!

[@Movelectrics]

No worries and stay safe! 🛴

[@eduardossantana729]

Thanks for the helpful hints

[@Movelectrics]

No problem at all

[@edwinroelants7289]

Thank you for the tutorial! Really solved the problem

[@Movelectrics]

No worries Edwin 🤛🏻

[@samcraddock-camp7413]

Brilliant video mate. It's perfect timing as I'm currently having a bit of an issue with the motor over running and the brakes not being as responsive. If I could give a bit of feedback, the editing in the middle part was quite snappy and it felt a little fast in places. Can't fault your advice in the slightest though and hope you keep creating excellent content.

[@Movelectrics]

I definitely jumped ahead for sure!! But i am glad it has helped you out! I appreciate the comment👌🏻 the Xtech upgrade I’ll be doing soon also. Safe scooting Sam 🛴

[@samcraddock-camp7413]

@@Movelectrics Hope you didn't mind mate, I'm grateful the scooting community have someone like yourself doing videos like this!

[@teosto1384]

Fantastic info. For the gap between the pad and the disc it would have been good to hear a mention like: "a regular drawing paper sheet should be able to move between them freely but if you have three sheets then that's too big of a gap." I'll be sure to test mine the soonest I can. From getting my first 500km on my scooter I've definitely noticed some loosening on the brake department already.

[@Movelectrics]

Great tip! 🛴

[@MarkSmeeds]

Thanks for the info mate. I have been trying to adjust the brakes of my daughters XIAOMI alike step many times but could not work it out. With your info it was super easy 😀😀

[@Movelectrics]

No problem Mark ⚡️

[@bigwhill13]

this video is very helpful thanks Lad. more video tutorial. thumbs up

[@Movelectrics]

Thanks Rowel for the support 🤛🏻

[@justinhancock595]

IQ of a 1000.. thanks mate

[@Movelectrics]

Hi Justin! Thanks for watching!! Scoot safe! 🛴

[@Gotiz85]

Thanks for the guide

[@Movelectrics]

No problem at all!! ⚡️

[@CarlSenah]

thanks sir

[@Movelectrics]

No worries at all ⚡️

[@manayard82]

Its like watching myself fixing my brakes which I changed last month with the pad completely worn out in 5 months

[@Movelectrics]

5 months? Short time! Well stay safe Leonard! Thanks for the support 🛴

[@fredisyoga873]

Are you still making the xtech brake adjustments video? Just installed them and can’t find a clear video on how to adjust these brakes. Thanks man your videos are the best!

[@Movelectrics]

Hi Fred. I still have the stock, i plan on wearing them down first. Join my FB group and we can help further, post a picture or video if possible 🛴 I appreciate the support ⚡️FB group bit.ly/2NMeXIY

[@virtualdave]

I had to do this one week after owning the scooter after I mashed it up going over a dodgy speed hump and dropping the scooter on its side when I jumped off it, the brake started making a grinding sound on the disc, was going to take ages to get it sorted so I managed to fix it myself, brakes been working fine since no grinding.happened about four months ago and I use the scooter almost everyday

[@Movelectrics]

Thank god you are all good!! Scoot safe Dave 🛴

[@Abdullah-zr7mw]

Doesbthe fron well grind as well

[@virtualdave]

@@Abdullah-zr7mw My front wheel does not grind at all.

[@Abdullah-zr7mw]

@@virtualdave my front wheel has fully jammed do you think it could be wiring

[@virtualdave]

@@Abdullah-zr7mw I don’t know anything about the workings of the motor. Sorry.

[@christopherbate6248]

What level of regen/e brake setting do you find best ? Mine came out the factory set on number 2/10

[@Movelectrics]

From what I remember it was set to weak.

[@KamiKazeK]

Hey man, really enjoying your xiaomi videos! Will you make a video bout changing the tires to 10" on pro 2. I am a heavy guy 6,4 tall and 108kg, want my pro 2 to do best with my weight and all. Thank you

[@Movelectrics]

Hi! There are videos already on YT about changing to 10s. I’m on the stock ones with no issues. Maintain the pressure to around 45psi. 10s are more comfortable and easier to change. You could do what I done and put the front suspension on and just keep the stock tyres? Makes a massive difference!

[@KamiKazeK]

@@Movelectrics thanks man, ill see what i will do. Appreciate your videos, they helped alot.

[@Movelectrics]

No problem and thanks for the support!!

[@ashyslashy5722]

Greetings! Could you please do a guide on how to adjust the brakes on the new 4 pro model? The mechanism is similar but also quite different. There are 2 moveable brakes instead of 1, and pulling the brake cable doesn’t seem to do anything. I tried adjusting everything myself, but no luck, and scooters are not popular where I live, so I can’t take it to a repair shop, because nobody can or wants to do it. Please 🙏 this is urgent. I want to safely ride my scooter.

[@Movelectrics]

I don’t have the Pro 4 model. Can you post a quick video on my FB group? bit.ly/2NMeXIY

[@capalot6995]

You should open a scooter shop and people would come to you for you to fix there scooter so useful

[@Movelectrics]

Personally I love making the videos. I have a few plans for next year, a few ideas I want to try!

[@alanweir3567]

The spring is broken in my mi pro 2 brake.Any videos or even know where to get the right replacement spring.I can buy the whole assembly but I like to repair stuff.I have it all stripped off and it's only the spring that's sheared.

[@Movelectrics]

Any bicycle shop should have them or AliExpress.

[@alanweir3567]

​@@MovelectricsThanks mate.Been looking and ones I've seen are too big in diameter.Need around 14 or 15 mm.

[@Movelectrics]

@alanweir3567 AliExpress

[@leves555]

Hi, I have a brand new Pro 2 and a “rubbing”, “scratching” noise is coming from the rear wheel every time it rotates around ( it is not constant). The more wieght is on the scooter the louder the noise is. The wheel rotates freely when in the air. Do you think it is a brake or bearing issue?

[@Movelectrics]

Hi Levente! Sounds like brake disc rubbing, common so don’t worry! Did you try and adjust them following the methods in this video?

[@leves555]

@@Movelectrics not yet, but I will give it a try. Thanks for the quick reply.

[@Movelectrics]

Takes literally a minute to fix 🛴

[@fahrbloosky]

can you advise the ultimate replacement pads for xaiomi mi m365 pro please? thanks

[@Movelectrics]

AliExpress. Just type Xiaomi M366 Pro pads.

[@fahrbloosky]

@@Movelectricsthanks though i want brand name not source or what is best type? btw like your vdos

[@Movelectrics]

@@fahrbloosky hard to get ‘branded’ named pads. Most are generic. Thanks for the support 👊🏼

[@fahrbloosky]

super, thanks

[@fortu0292]

In my Xiaomi M365 Pro I have to apply too much pressure on the brake lever to brake. What should I do? Thanks

[@Movelectrics]

Follow this video and adjust ⚡️

[@adaniel69]

Hi. Do you have an idea why is my brakelight not flashing when i press brake(any of the 2 handle) on my Xiaomi Pro 2(when i turn on light, is turning on, but not flashing on brake)? Can be related to firmware?(Germany) Thanks

[@Movelectrics]

Hi! Yes, firmware could have possibly caused this. Did you change it recently?

[@adaniel69]

@@Movelectrics i've buyd yesterday from somebody. I don't know if was flashed before... I didn't flashed

[@Movelectrics]

Ask the person you bought it from ⚡️

[@adaniel69]

@@Movelectrics @RayS Tech-Know-logy i've tryed an app called German Maneuver. This change region to Europe(up to 25km/h) until i shut down the scooter(power button). When i start it again is comming back to german version. So in Europe mode, brake light is working and it blinks. So i guess that this is how it should be in Germany....

[@MojangstaMarc]

I gave this a shot, followed step by step, but I still can't figure out how to make the left pad move any closer, and despite tightening everything and pulling the cable, my brake handle still goes down all the way (and now has a kind of creaking sound to it). Any suggestions?

[@Movelectrics]

Hi Marc Start over. Loosen the whole caliper (2 small bolts on top) Squeeze the handle until the caliper is squeezed against the disc AND tighten while the lever is still pulled. This will align it. Next step, adjust the back caliper like I did in the video and get it close to the disc. Next step, adjust the cable to push in the front pad close to the disc. Remember to loosen where the cable is first to give it slack before pulling it to push the pad in. Tighten everything back then. Is this a new scooter or have you had it a while?

[@MojangstaMarc]

@@Movelectrics Thanks for the response. I did as suggested, but it still takes almost the whole squeeze to get a stop, and the part of the assembly that rotates forward is almost touching now, despite the cable being pulled as tight as I can get it. I wonder if maybe I've just worn down the pad? I've had the scooter two years now, and most of that time it's been cranked up a little, a friend has it go up to 28km/hr, but I do a lot of city riding that can end up with a bunch of stops and starts. Is it time to look into replacing the pad, if I can't get it any closer with the given instructions? Thanks!

[@Movelectrics]

Ah right, more than likely it is the pads then. They are quite easy to change by the look of things. There are tutorials on YT about it. I’ll do one at some stage also 🛴

[@virtualdave]

Hi I got a problem, on the brake unit (back wheel) the rubber cover has warped and was Hanging off the mechanism, and it had now snapped and come off, any idea where you can get a replacement? For that matter also would like to know how to get a replacement spring inside the brake unit. Without having to pay for a new brake system for a piece of rubber and spring. Thanks

[@Movelectrics]

Hi Dave I’m not sure about the replacement spring, if it was me, I would just replace it. They are cheap. Try this place, they have most essential parts bit.ly/3eT0GBN

[@virtualdave]

@@Movelectrics cheers, I just emailed them, I currently glued the rubber and have taped it with some water proof tape. I can’t do another day on London Bus The thing that warped it was the cold snow ⛄️ must have frozen the rubber.

[@virtualdave]

@@Movelectrics I bought from mybestscooter.co.uk before I use their Amazon site, so I bought the brake unit from them. 👍

[@virtualdave]

I got the unit, it’s third party and the design of the “arm” is different, straight instead of curved. I have put on and readjusted, the brake seems good so far. Did you try the X tech brake? Is it worth getting?

[@Movelectrics]

I have the Xtech kit, I’m gonna replace it as soon as the pads wear down on the original. I was on a Xiaomi that had the kit installed and you could definitely feel the difference. Smoother stopping. Well done for fitting the new part 🛴

[@kubakotynia3573]

What are the Best brake pads for xiaomi pro 2 ?

[@Movelectrics]

Hi Kuba. If you have stock brakes, get the original pads. Aliexpress should have them 🛴

[@Habdabi]

Assuming no cruse control - for the 1st half of the brake lever, does it engage Kers/regenerative braking? Or does it just stop throttle if you have applied it? 1st half electric brake, 2nd half engage disc brake? Or, do both activate at 2nd half? Basically, what does the first half of the brake lever do - Re-gen/Kers/Electronic Brake OR just prevents throttle (is this what you mean by it cuts the motor??)? Sorry for the detailed question haha, its really bugging me!

[@Movelectrics]

Hi Habs. Great question! If you have no cruise control activated and you are driving the scooter, as soon as you let go of the accelerator, the front regen brake kicks in. The first half of the brake does nothing unless you have your brakes adjusted to engage as soon as you pull the leaver. The problem with doing that is the front regen brake won’t engage at the same time resulting in the front motor possible getting burnt out by continuing to move until the sensor in the leaver arm engages it to stop (which also turns on the back brake light) The sweet spot is the half way point, brake leaver is used and at the same time, the front regen brake is used resulting in better braking plus less chance of burning out anything. When the back light flashed, the pads should be hitting the disk and the front motor stopping. I would also recommend to make sure you have your regen braking set to weak to avoid issues like a burnt controller/motor via the app. Remember to never go down a hill fast either on a full charge as that can burn the controller inside.

[@Habdabi]

@@Movelectrics thanks for the great reply. Loved your channel on the maintenance and mod installs, really helpful!

[@Habdabi]

@@Movelectrics planning on removing the freewheel regen with CFW at somepoint. Will report back here what the front half of brake does when free wheeling and if it ends up slowing down. I feel like there must be some small amount electronic braking in the first half of lever as you can hear a whine, but wont know till disabling coasting regen. Perhaps it is just a motor cut out. Wont be for a while though while I get use to the handling! I wonder how many lives you might save helping people maintain their Scoots. Would love to find out about tightening the screw/bolt next to the clamp (eitherside) In a future video! Keep it up!

[@Movelectrics]

No problem! I try my best to help out when I can!! Scoot safe 🛴

[@Movelectrics]

Be careful disabling the front regen brake, it’s good to have more stopping power. I done videos already about the folding mechanism and adjusting correctly plus the installation of the X-lock.

[@user-dk3xo9oe6y]

I have an aovo pro m365 and the mechanical brake works but the front wheel brake doesn’t work anymore like when I used to brake the front wheel would stop too but now it doesn’t

[@Movelectrics]

Front brake is electronic (from the motor) I never had this scooter but check the app. You can sometimes adjust the intensity of the regen braking.

[@user-dk3xo9oe6y]

@@Movelectrics I found the issue it seems to be a problem with the controller that’s inside the scooter. Something has gone wrong there needs a whole replacement.

[@Movelectrics]

You have warranty?

[@user-dk3xo9oe6y]

@@Movelectrics no it finished this year in September but I did contact aovo and they agreed to fix all the problems with my scooter for free at a repair centre in China if I pay postage to China.

[@raphael5067]

Mouch butter 👍

[@Movelectrics]

Good to hear ⚡️

[@thomasphillips885]

No need to adjust the outside pad independent of the caliper?

[@Movelectrics]

Outside cannot be adjusted like the rear pad. It’s operated by the cable. Easy to do.

[@thomasphillips885]

It looks like the Mi Scooter 4 (scooter I have) moved the adjustable pad to be the one on the outside, making it easy more accessible. That's why I wondered if you had to adjust both haha

[@Movelectrics]

@@thomasphillips885 this the original Xiaomi M365 Pro that came out first. My very first scooter.

[@thomasphillips885]

I used this video as a reference and adjusted the brakes on my Mi Scooter 4 today, and it's so much better now. They swapped the adjustable pad to be the outside one (no more putting the Allen key through the back wheel), but everything else is exactly the same. Thanks!

[@jimroadhers]

How many miles b4 pad replacement?

[@Movelectrics]

Hi James! It really depends how harsh you brake. I gradually pull the leaver coming to a stop. As the pads wear down, you can adjust them like I did in this video and get the most out of them. I heard many people going well over 1000kms and the pads are still fine. They are very cheap to buy too which is great 🛴

[@wouterdegroot3803]

You don't even need the rear brakes. I Just snipped the whole cable off. Just use the most agressieve engine brake in cfw.

[@Movelectrics]

You cannot rely on the regenerative braking. 1 brake is not enough and cutting the cable is definitely not something anyone should do 🛴

[@gowithbazza]

How hard / easy is it to renew the brake cable on an e-scooter 😁

[@Movelectrics]

Hi Barry. Never had to do it. I’d imagine after long time use, they would need to be changed. Just keep them adjusted, and try not to pull hard on the leaver 🛴

[@TJJ85]

You have to undo the plastic bottom plate and also the controller because the cable is routed behind it. Also there is some kind of waterproof foam in the frame tube so it's propably best to put some sealant after you replace the brake cable. It's not that difficult to do but time consuming. The foam is weird stuff reminds me of polyurethane but it's spongy and elastic.

[@Ahmedmohamed-cb8wj]

will this tutorial work on the pro 2 ??

[@Movelectrics]

Hi Ahmed. Yes they are the exact same.

[@Ahmedmohamed-cb8wj]

@@Movelectrics Pew 😅thx for the response bro you are a lifesaver 😀

[@Movelectrics]

@@Ahmedmohamed-cb8wj no worries!! Scoot safe 🛴

[@LadyPanko]

my wheel is automaticly braking i was changing the tire and then this happend

[@Movelectrics]

Adjust like in the video ⚡️

[@LadyPanko]

@@Movelectricsstill not working i have more space on the left side i cant adjust the round screw bc if i do this then is very loose and it can fell of

[@Movelectrics]

@LadyPanko your definitely doing something wrong. Adjust brake cable side first then adjust inner pad. Start over.