Omg, after you remove bolts, just smack the axle from the oposite side with a rubber hammer it pops in seconds
@alinloghin36773 жыл бұрын
Thank mate, ive been one hour trying to remove it till i see ur video,thanks for the video ,cheers
@clintontheclinton3 жыл бұрын
thank you man i couldnt get that cover off for anything until i used two flatheads instead of one
@1Saltyone2 жыл бұрын
I THINK TAPPING THE TIRE EDGE ON THE FLOOR WAS THE BETTER IDEA AND WORKED FOR ME 2 SECONDS AFTER SEEING YOU DO IT AND I USED CHINESE TOOLS
@mubafaw3 жыл бұрын
Life saver! :)
@ashmeetghotra177611 ай бұрын
Thank You,
@arofiq70023 жыл бұрын
After you take off all screw, twist the plate counter clockwise.. afterward, you can use your screwdriver to take off the plate.. I did that
@spacefightertzz3 жыл бұрын
Just wondering if the xiaomi motor will work with the gotrax gxl v2. the gotrax motor has been out of stock for more than a couple months now. I looked at the wiring on my gotrax and it looked like the same wire colors in the xiaomi motor photos. I forget the colors but something like orange, white, blue. It wont be too hard to just snip the wires then solder the xiaomi wires to the gotrax adapter. But the Xiaomi photos also showed an extra part of wiring adapter that I have no idea what it is. There are the 3 wires and then some extra adapter.
@DaBinChe3 жыл бұрын
If they have same voltage spec I don't see why it wouldn't work.
@NAKEDTRUTHMe Жыл бұрын
What are you doing bang the wheel down on axle and it will just pop out
@oldskoolcodgamer96683 жыл бұрын
I have a Swagtron 5 everything is good besides the motor it won’t move at all when I use the throttle and it makes a noise when in the wheel when I use the throttle idk if the motor is done on it or a lose wire
@DaBinChe3 жыл бұрын
check all the connections, use a multimeter to check for voltage make sure the battery is charged and holding as well as at all the components so they are getting volts in/out. If you know it is the motor then take the cap off like I showed in this video (should be the same design). And you'll see if something is burnt in the motor. Also check for shorts, usually something will be burnt.
@cristif923 жыл бұрын
why do you still continued to make a tutorial when you didn't know... ? :D
@timzeebroek5782 жыл бұрын
I have the cover of with the motor instead and the disk wont come of the motot i wanted to chance the bearish becaus it was al loose and scratchy ...
@mihailucian4092 жыл бұрын
dc my friend...BLDC motor
@vitaliynicolaevich72511 ай бұрын
Что он творит !? 😂
@dinfar43672 жыл бұрын
Mate Can you make a video and teach how to change the motor and put a new on it on a Xiaomi 1s then u Will be the bestttt✌️
@DaBinChe2 жыл бұрын
If that time comes, which won't be anytime soon
@dinfar43672 жыл бұрын
@@DaBinChe wdym?
@bigmanfredgames66133 жыл бұрын
Can you upgrade the motor on this
@DaBinChe3 жыл бұрын
probably but if you gonna spend more $$ just get the next higher model and be done...actually get one with 10" wheels instead of 8.5". The larger is so much more stable and comfortable. I like my GoTrax G4 much more than the M365Pro and they are about the same price.
@s10indacut104 жыл бұрын
Wat equipment do I need
@DaBinChe4 жыл бұрын
a set of metric allen keys/wrenches, set of torx keys/wrenches, couple flat head screwdrivers, 18mm flare nut wrench
@paulelvins90663 жыл бұрын
To many advertisers it's a joke
@nevilleparis10123 жыл бұрын
Thats a 42V DC 250W to 500W instantaneous Power, motor mate, surely not an AC 3 phase motor. But thumbs up for the dismantling of the wheel. Helped alot!!!!!!!!!!!!!!!!!!
@Mikael-jt1hk2 жыл бұрын
This is like watching a blind guy drive a car.. what in the fuck are you doing mate?
@JohnnyP--RES--17-ERS2 жыл бұрын
What are you doing geez🙈
@machintartempion58243 жыл бұрын
Travail de dégueulasse... Il suffit de taper sur l'axe avec un maillet, et tout sort en 10 secondes... Quand on ne sait pas, on ne fait pas!
@DaBinChe3 жыл бұрын
I'll try that next time.
@robertjames47852 жыл бұрын
WRONG! This could damage your scooter. There’s videos of how to do it properly.
It would be much better if you actually practiced this yourself before making the video. As you didn't do this the video has long minutes of inconsequential chatter and nervous repetition which is annoying. Short informative videos are better.
@VinnySeixas Жыл бұрын
For anyone trying this, there is an easier way shown here: kzbin.info/www/bejne/a2Gwo3qpqq1rhdU
@carter8985 Жыл бұрын
I think u should know how to remove the motor before making a video on it!