XIAXIU H650 RAPTOR with openTX Transmitter Jumper T-Pro
Пікірлер: 13
@theoztreecrasher264711 ай бұрын
Works a treat, Pete! 😉 Now all we need is to see if Bob's servo expander idea will give us the correct motor reversing capability. 🤔 The servo linkages ARE pretty sloppy even with the stock set-up. Tightening them up should help. 😊
@Retep1211 ай бұрын
Yes, I have to shrink the holes in the servo horns with hot glue and bend the linkage a bit. I think the servos won't last long, so I'll install higher quality ones. I also saw the bearing play in the video. Still flies well.😉
@RCBobOng11 ай бұрын
@@Retep12 You can use slightly thicker rods as well. The stock ones are 0.9mm. I'm using 1.0mm rods with the stock servo horns, they reduce the sloppiness by a lot. 😁
@RCBobOng11 ай бұрын
Wow, very nice flying! I need to get some videos of it driving around the car park. 🤣 Interesting that the rudder has so much corrective movement. I assume that's from the gyro?
@Retep1211 ай бұрын
Yes, the rudder corrections come from the gyro. That was Acrobat mode, which I misunderstood.
@adareone4 ай бұрын
I just recovered mine today from the trees, the back motor mount wing broke of a the bottom of the fuselage. However two bambo skew stick from the bottom up and the last remaining glue that came with the plan its back into position. however my servo for the two flight plains on both sides of the tail is not working. Questions 1. where do I get more glue? and 2. where do I get another servo?
@Retep124 ай бұрын
The glue "Uhu Por" is very suitable. Servos are 3.7g. You can get them from specialist retailers or from Aliexpress. Make sure they are waterproof. Other spare parts are also available from Aliexpress.
@mike_t_007Ай бұрын
So how did the repair go?
@adareoneАй бұрын
@@mike_t_007 the parts never arrived from Banggood to try out. Ordered a new plane
@mike_t_007Ай бұрын
@adareone 😯 sorry to hear about that. Did you order the same plane or a different one