XK Edge A430 - Upgrade Motor Mount High Resolution Photos

[@GroundControlRC]

Here is a link to a video I posted on great spare LIPOs for these planes: kzbin.info/www/bejne/oqmoe6h3m9hkb6s

[@NganTran-nt9jj]

so touching for an excellent video

[@GroundControlRC]

Thank you much! See you in the Air!

[@MegaKienzle]

Thanks a lot my friend for such good pictures and explanations

[@GroundControlRC]

You are most welcome and Happy Flying!

[@thijss1272]

cool upgrade!

[@GroundControlRC]

Thank you much and Happy Flying!

[@HowToDIYRc]

ya that's a nice fit and super easy to make thanks for the photo's and effort you put in cheers mate :D

[@GroundControlRC]

Thank you for the kind words and Happy Flying!

[@TheFlyinTek]

Really like this mod. Want to try it on the A600 as I had mentioned to you previously. Looks like a solid mount. Question, do you use the same lipo that came with it or are you using something stronger?

[@GroundControlRC]

I purchased spare batteries from Hobby King, they are the Nanotech 2S 300mah 35C LIPOs. I already had these batteries as I use them in our Glue & Fly Series Micro Planes. So right now I have (4) planes I use these batteries in. I also use the stock LIPOs from the DHC-2 Beaver and the Edge A430. The Motor, even with a 5x3 prop is pulling approx. 4.5 amps at full throttle while flying. The Eachine TX03 at 50mw I estimate will use approx. .75 amps. I don't think the micro servos plus the receiver will use more than 1 amp. So the total amp draw at the low end would be 6.25 amps and maybe at the high end around 7 amps. The stock LIPO - Fullymax 2S 300mah 25C should be able to provide 7.5 amps. So they should be good to go on this setup. The Nanotechs are almost identical in size and weight to the Fullymax, however, they are rated at 35C, so I can get 10.5 amps from those LIPOs. Thanks for the comment and Happy Flying!

[@GroundControlRC]

Oh, here is a link to a video I posted on great spare LIPOs for these planes: kzbin.info/www/bejne/oqmoe6h3m9hkb6s