XK Helicopter Comparison & X6 Transmitter Help - K100, K110, K120, K123 & K124 - Motion RC

[@MotionRC]

Sorry so long guys. Should have maybe split it, but I hope the timecode table of contents in the description gets you to the info you need

[@edwardcody3736]

Hi, i was wondering why my x6 transmitter backlight doesnt work, is there some sort of settings to disable or emable it?

[@heavenscanwait]

Love XK helis (after trying MCPX, MCPX BL etc). Initially had XK100 and liked it so much that I bought XK110, then another XK110, then XK123 & XK124. All excellent. Much better than blade micros and all have good gyros, very durable and have proper servos

[@MotionRC]

Thanks for sharing. Glad to hear it. I want to try the newer k130 soon

[@musicbox4340]

I have watched lots of videos about transmiter setups, but this one was the best without doubt!!! Congrats fellow!!!

[@yobrojoost9497]

Excellent video, you really cleared up some issues I wasn't sure about, especially the transmitter. I know this video is 4 years old, I've just got the K110S, with the XK6 transmitter. It's very good, I've just flown it outside for the first time, with stabilisation on, and didn't crash it once, after I had tamed it quite a bit. Straight out of the box it was too wild for my liking. I'm not ready for 3D yet, just flying scale. Thanks for this great video, it's helped me a lot!

[@flyingbuddy3918]

35:20-“for something so small, it is very, very impressive”-that’s what she said ;)

[@vansonmafeet734]

Great video. I purchased a K100 and a K130, both RTF. Then it donned on me that they use the same radio. Well hell, then I decided to get the K120 w/o the radio and bind it to the one for the K100. Life is great. Going to try and fly 3D with the K100 first before the other two. Just in case.

[@ShadowOppsRC]

Good job James! It is not real clear the differences until you compare the helis side by side.

[@oldmandoingstuff8997]

6 years later Sept 2024, Jus gettin a xk x110s, . Versatile Transmitter. Wow that 120 2 cell was cool , I believe that is discontinued. Tks Motion for Transmitter Tutorial

[@jmc3367]

Dood, this video saved my will to keep flying......transitioning to 6ch and needed controls help, calmed down all curves and doing well.....thanks man.

[@rcas350pilot8]

Just purchased the k124 and AS350 450 size from Motion RC. Having a blast with the k124 and still setting up the AS350, beautiful helicopter. Am planning on buying a second to customize. It was a pleasure dealing with motion RC and I will be buying from them again.

[@thercenthusiast]

Thanks for the information my xk100 and xk x6 Thanks for taking the time

[@Flight6677]

James - Excellent video. Thank you for taking the time to explain the transmitter functions and showing the differences in the models.

[@shownuff891]

I definitely appreciate a video like this. Like you said early in the video that the product page can be a little skimpy with info on these helicopters but your video should definitely answer many questions. I would buy one of those but I’m still waiting for you Admiral Helicopters to come out! But great video 😀

[@malcyjb]

HI, I want to use this radio with the Eachine 180, I have managed to set up most things an your video was very helpful, but how do you set the 3D 6G switch and settings, it does seem impossible on this radio, how do you set any switch....? Thanks Malc UK

[@bradleycrandall30]

Great video. Really nailed the radio programming.

[@mohanadrahiem]

thanks for the video,i have couple of questions 1-on d/r setting what do the numbers represent ? percentage ? 2-in idle up mode isnt the rpm supposed to be constant and only the pitch is changing ? if so why did you put variable number in idle number mode ? thanks

[@kunad2294]

thanks you very much , now i'll just get the xk k130 .

[@tommycruz100]

Great video !!! You guys are great !! Great little helis,, tons of fun

[@Thejasond1979]

thank you for your video, gave me a good feel for transmitter

[@TechNoPhobiaGirl]

Just found your channel and I'm *VERY* impressed! Your video quality and lighting are OUTSTANDING! Which camera are you using? Thx for the great content!

[@plasticapple704]

Will Motion RC be selling the new K130? If so, when and how much? Thanks

[@taurushipointenthusiast1306]

As I was taught many moons ago Rotary wing aircraft, so it is like clip/magazine is it a wing,propeller or blade... One of those things the world may truly never know hahahahah

[@michael_hahnell]

In this video you mentioned that it is possible to "disable" the throttel for a plane. How is this done ? I just got the X6 transmitter and want to use it with my XK A600 .... Thanks

[@heavenscanwait]

I don't know about xk x6 transmitter but I have done that on older spektrum dx6i, and basically you set plane as a heli

[@robertkelly5515]

I got the XK 110 on order, hope it turns out to be a reliable little flyer, unlike the Xk130. The reviews of the XK 110 are good so it should be OK. Q; I wonder if a control board of an XK110 would work in my broken XK130? could be an idea for a cheap fix.

[@MotionRC]

Sorry to hear that as the K130 is the newest of the bunch

[@fklotaloi]

Thanks for uploading.. It helped me as well as will others too. 😊

[@jeffrivera6]

can i fit the canopy of the k120 to the k110s? i just want my(otw) k110s look a little bigger 😅

[@MrPeeteboy]

Hey naybe I missed it somehow but when setting D/R and Expo you didnt show us how we need to set both sides of each stick! when you dialed in a expo you need to move your sticks to all positions and you will see everything is wonky now...

[@yottiguerra9189]

Nice video you can help me because my k124 is no stable ...

[@FreedomForce94]

i saw there's a ppm port. Can I connect the transmitter to a simulator?

[@mike_romeo_lima]

30:36 is thy gyro just the tail motor or the whole stability of the helicopter (lower gyro=more acrobatic?)?

[@heavenscanwait]

I think it is the whole stability of the heli, and if you dial down the gyro gain, it becomes very twitchy (I know some people call it aerobatic🤣🤣🤣)

[@SilkStringsMusic]

Thank you baby😊

[@mdgulzar1940]

Hey motion RC pls tell me how to set normal mode in xk k123,,,,,, because my remote was wrong working then I had to refractory setting don Since then it has not been taking off

[@heavenscanwait]

I think the best way is to set it as he explains it and then come back with any questions. If your heli does not lift off, then look at throttle and pitch curves

[@dsgsdgasrdgarg]

One question guys... has the X6 transmitter mode4? Or mode 1 and mode 2 only?

[@lynxAzur]

Very informative ! Thanx !

[@richiebricker]

My x6 transmitter wont bind to my new xk k110s. Anybody know whats going on?

[@robertof86k]

Excellent video, please, comment the new helicopter XK K-130, and if it is compatible with X6 radio??

[@MotionRC]

Should be. It's the same protocol

[@tylerjackson4168]

I bound mine with my old x6 and it worked fine.

[@thliaw]

Hi Motion RC, what do you think about this X6 transmitter? Is this a good transmitter?

[@MotionRC]

Works fine for these smaller products. It's exceeded my expectations for the price range

[@mike_romeo_lima]

For what is the dual rate switch exactly? I didn‘t understand it

[@hopsta5628]

35 minute mark, explains it.

[@koobinsun359]

is battery of k124 get suitable for place in k123 ??

[@black_baron_net]

☠BLACK BARON☠ My tail suddenly no longer holds and freaks out during flight on my K124. I already changed the tail motor. No result. Tail is totally unstable. What can I do? 22:40 D/R ( = 80, 80, 80) and Gyro ( = 75) settings are factory default ... no better results no matter what entries I use. Any iDeas?

[@BICIeCOMPUTERconGabriele]

Very informative. Thanks

[@itch4travel]

How to reset x6 to factory setting?

[@nutleighgrove3658]

Hey - great video! I recently bought a K100 BNF from eBay with the promise that it would bind with any 2.4 GHz 6CH transmitter. However, when trying to bind with my CopterX transmitter, no joy so is the seller is trying it on? Thanks 🌈🚁🌈🚁

[@stephencowburn3241]

Aston.villa newso com.

[@heavenscanwait]

It will only bind with FHSS Futaba protocol (not all Futaba are FHSS)

[@franksinclair2137]

Hi what model # is the as350

[@lochcarroncandles3936]

I've just bought a K100 and it has a mind of its own. In 6G mode it sometimes will start to lift off OK, then for no reason it will start spinning as if the tail motor isn't working. Check tail motor, sometimes it works, other times it doesn't. So far I'm not impressed with this heli. It could be that a setting is wrong somewhere, but I think I have a dodgy tail motor. Do you have any suggestions? I didn't buy the heli from you

[@mrbrown3546]

Check the tail rotor connector, it's tiny, it may have come loose. I had this issue a few times getting started, I'd land hard/crash etc and a connector would start coming loose. If it's not that best to contact the place you bought it.

[@aeromodellismodinamicoaere3829]

È un buon video in sostanza ma è troppo lungo come tempistiche....... si sarebbe dovuto studiare un po di più la costruzione delle sequenze video - mi complimento per i prodotti che distribuite, bravi 😊👍👏👏👏

[@BoostaholicRacing]

Great video

[@asifheliRC]

Good compression.

[@omaramreki1288]

Hi please tell price

[@anmwolfrc159]

You showed the T-curve numbers what are the P-curve numbers

[@MotionRC]

Throttle curve and Pitch Curve. I never changed them from the stock settings

[@anmwolfrc159]

Thanks bro have a bless one

[@DutchRC]

You don't kid around or what James? (40 minutes :P) Informative for sure though :) have you tried binding these up to a Futaba radio by the way? I couldn't get it to work with a T14SG (which does all Futaba protocols)

[@MotionRC]

I have not yet, but I'm sure someone at my field will have a futaba, maybe I'll try it when I take them for some flying

[@aerialcombat]

How do you bind it to another model?

[@mrbrown3546]

At 36:00 he shows how... It jumps the video so could be confusing. Change model number, press and hold the little bind button (he shows where it is on the XK120) hold the button until it binds/turns the led blue. Hope it helps you

[@nightfury3664]

I'll just clarify can they all run with the same transmitter? Which is more better K123 or K124?

[@mrbrown3546]

Yes they can all run from the same transmitter. You're only limited by how many you want setup on the controller all at once. I think he said it was 12 models total. Which is better? That's very subjective and also depends on what you want/like/need/can afford etc etc. Do you like scale or just really like flying heli's. You'll probably get the longer flight time and more 'punch' out of the 2s battery, which is strangely only on the XK120. Would've been nice to see that battery used on the 123 & 124 also

[@danialtun5431]

TQ.MR.can you send to me how to fly aerobatic transmitter video please I have4 heli i can not flying yet please help to me.TQ

[@JohnTaylor-ne2kz]

Maybe I missed it but can someone tell me which of these helis is easier to fly? Does the 123 fly the same as the 124? I like the 124 but I've seen to many videos describing how difficult it is to put the 124's canopy back on its frame. Since they all have the 6G gyro I would think that they basically all have the same flight characteristics as far as ease of flight.I would like to buy the easiest one to fly. If anybody with knowledge and/or experience with these could suggest one for me, I'd really appreciate it.

[@MotionRC]

They are all pretty similar in flight if flying scale. The more expensive ones have beefier parts and could make crashes less damaging.

[@JohnTaylor-ne2kz]

@@MotionRC Ok, and the others starting at the k100? Is there one from that group that's easier to fly? Thanks for helping with this. I'm going to buy one from MRC but I don't want to get the wrong one for me right from the start. Thanks again!

[@MotionRC]

@@JohnTaylor-ne2kz If this will be your first heli to try and learn orientation, go with whichever doesn't hurt your pocket the least and you like the looks of. Personally, I prefer the scale looking heli's to the 3d style ones, but they all fly well and are great to learn on and have fun with in the yard

[@kunad2294]

hello, can this x6 transmitter controlled the xk k130 helicopter, thanks

[@vansonmafeet734]

It does. I have a K130 and a K100. I bound both helicopters to one radio and they both work fine.

[@saminagolandaz5165]

yes

[@caioheitor3181]

Thank you very much , it helped me a lot.

[@officialfanofrichiebricker8324]

I dont believe the Transmitter for the xk k100 is compatible with the others. I bought a k100 that had a bad transmitter and I also bought a 110 that arrived later. The xk k110 transmitter that youve been showing does not work for the k100. They wouldnt give me a refund or replace the transmitter(after 30 days) so I was screwed, at least I thought because I have since canabolized the 100 for parts for the 110. So the main flight board is different and I believe the esc is s well as it uses a brushed motor

[@aerialcombat]

My k110 pitches to the right and forward no matter how much I adjust the trim, can you help?

[@tylerjackson4168]

Make sure your board is level and is vibration dampened. If the board isn't level it will think the heli isn't. Hope this helps!

[@aerialcombat]

@@tylerjackson4168 thank you, I'll check it

[@jeroen-surf]

Nice informative video, thanks!

[@samuelplaygames6493]

Cara não entendo seu idioma. Mas Dividimos mesma paixao.

[@matk4731]

I would love to buy one of theses helicopters off you guys. But you won’t them ship to Australia 🇦🇺 because of the batteries 👎🏻

[@mrbrown3546]

Not good for this company but you can buy them elsewhere that will post to us... I won't link any from respect but Google the model number.

[@vansonmafeet734]

Where's the first video comparison?

[@MotionRC]

First video was an overview kzbin.info/www/bejne/eJW9Z56Ijsljfpo

[@arowsablon4842]

can xk k130 use a xk 110 transmitter?

[@hopsta5628]

Yes

[@PurpleKnightmare]

Those are coreless motors, not brushed motors.

[@ATVHOLICS]

Got a little way in but too many ads for me sorry

[@robertkelly5515]

My XK 130 died very quickly, very dissapointed in it.I may give XK one more chance and Buy an BNF XK 110 as it's got good reviews, should do me.What I really need is a nice blade or similar of ebay.I consider buying KDS innova 450, could get kit or ARTF. I want a good reliable heli, not junk that breaks after a week. Rob

[@heavenscanwait]

All helis can break. I bought the 2nd XK110 just in case I break the first one and both are going strong. I would highly recomend XK110. I have bought some 500mAh batteries (can’t put the canopy on with that) and get over 12 minutes of hovering with each battery

[@robertkelly5515]

@@heavenscanwait I suppose so, but I expect them to last longer.I have a Bugs 3 still going strong after 2 years, so a few weeks longevity is rubbish.I consider model durability the mark of a quality product.Plus we put a lot of money into these things so £115 I paid for XK130 is no small change.Hopefully Xk110 will prove better and restore faith in the brand.I got some 1 cell Lipo's here, should work with the Xk110. I would modify your canopy to fit on with your 500mah lipo's.

[@MotionRC]

Did the electronics die or did you crash it?

[@robertkelly5515]

@@MotionRC I did have a few crashes, but I just kept putting it all back together again (it's not very strong heli, and needs metal gear servo's as well) then after I fitted new servos I disconnected the motor so I could check servo travel.I reconnected it and nothing, wouldn't spool up.So the electronics had died. Could be fixed, but I have just ordered an XK110 instead.I am wondering if an XK110 motherboard would work in this heli?

[@vernoncunanan105]

Where can i buy that...

[@MotionRC]

motionrc.com or motionrc.eu

[@daveday5507]

2:24 before you tell us who makes them and what they are.

[@MotionRC]

XK Helicopter Comparison? There is a full table of contents in the description to take you any portion of the video you need information on.

[@duyanhpham6431]

2020 ??XK K130😱😱

[@silbernersurfer8264]

Is it possible to flash the firmware again? My stick values go only from 4 to 100 when neg expo is used insted of 0 to 100. This doesnt apear when pos expo is used. You can watch it here kzbin.info/www/bejne/hmnLhZWer6mLbbs Tx calibration doesnt help!

[@mdgulzar1940]

Helicopter has problem or transmitter

[@MotionRC]

If you bought it from us, please contact customer service. Much easier to help that way then through KZbin comments

[@mdgulzar1940]

@@MotionRC if you know that pls make a restore video xk k6 Cha transmitter default settings after refractory setting ,,,my helicopter ok but it's not take off

[@danialtun5431]

Xk k123 is on the IC board binding switch have V931 is on the IC board binding switch don't have how to binding V931 rc helicopter

[@jakewinger3409]

Just got my k123 today! And no batteries...😒😒 lol bunk ass

[@thubandra963]

You can't name the model? You have to remember what # is What? I guess if you had a handful you could stick a piece of tape on the side on the radio with what # is what.

[@mrbrown3546]

Or underneath number the heli's 😉

[@heavenscanwait]

I have XK110, 123 & 124. There have numbers 2, 3 & 4 respectively (according to the number of main blades). both XK110s are bound to the same model number (I think🤔)

[@あさとおかだ]

asbutterfl5