Rainy weather has Wesley working in the shop. Exhaust swap, Temp gauge, fixed a little lighting issue, and swapped the sprocket. #xrsonly #upgrades #hondaxr650l
Пікірлер: 45
@faissal89972 жыл бұрын
I like the older style XRs only exhaust, it hangs a bit higher than this cone type.
@ungabunga86232 жыл бұрын
Yeah, I got the same "cone polishing" excuse after 4 weeks waiting for mine. Ended up at 6 weeks before it was shipped. Yours went on much easier than mine did. I had to expand the connector a bit to fit the new exhaust gasket before installation.
@TermiteOffroad2 жыл бұрын
How do you like the sound? It’s got a good deep thump to it.
@jamespolucha87909 ай бұрын
Man it sounds so much better and looks great too
@MrTrustme62 жыл бұрын
Got friends doing the pig the woods. I was going to do it on my XR this year for the first time but have other travel plans with the family. Hope you get some footage if you make it. I will for sure be there next year. Good Luck!
@TermiteOffroad2 жыл бұрын
Yeah we’re planning on recording it as much as possible. Looking forward to it!
@SaddleTrampTV2 жыл бұрын
Can certainly hear a difference! Now for some apehangers!
@TermiteOffroad2 жыл бұрын
😂 😂😂
@derelict_wanderer2 жыл бұрын
Wes- "we're not working on Termite today." Audience collectively- "Awwwwwwwww...." :( Wes- "We've been working on the washing machine." Audience- "Home how tos! Yay!" The new setup sounds great! Nice, lower rumble. All ready to ride, but held captive by the weather. It inevitably leads to "While I'm in here...." And yeah, work has me at 110%. Like you said, parts and upgrades are paid for that way.... Day off tomorrow just to get some more remodeling done that has been on standby.
@TermiteOffroad2 жыл бұрын
Haha yep it’s just been work and weather lately. But the sun will shine again soon……hopefully 😂 washing machine is still broke btw waiting on parts 😅
@davids111311134 ай бұрын
Kapplan America dyno tested the XR’s only pipe before and after actually loses you power unless you’re at like 8,000 rpm and you gain 2
@trevpelzer98182 жыл бұрын
Thanks for doing the video. I still have the stock exhaust and have been looking at the XR’s only pipe. I’d like an fmf q4 but can’t find one anywhere. I can’t tell if you have done the battery relocate under the seat but it’s been the best thing I’ve done to mine. Noticeable difference in weight on the backend and can tell a big difference in handling.
@TermiteOffroad2 жыл бұрын
I haven’t done the battery relocation yet but I plan on doing it soon. I’ve heard a lot of positive feedback on it. I was looking for fmf as well but couldn’t find anything either. But it worked out because I’m very happy with this muffler.
@trevpelzer98182 жыл бұрын
Where did you get your windscreen? That looks great.
@yafois9882 жыл бұрын
I watched another video they put a new pipe (engine to Muffler piece) on it, the dyno" results was a 10% torque LOSS low-mid range which is where we ride 99% of the time. They said it was a $300 waste of time Plus it has NO leg guard you need to add it on..
@TermiteOffroad2 жыл бұрын
Yeah that’s the header pipe, I saw that to. I can def tell a difference with the muffler. Runs waaay better, but I’ll be keeping the stock header!
@yafois9882 жыл бұрын
@@TermiteOffroad thx for the piece of info on this, so ill just do muffler only .
@goletajim Жыл бұрын
Don't leave out the weight difference when comparing!
@pilotwings21072 жыл бұрын
Nice video/bike!, been looking and comparing muffler options for my 2017 650L. That is a beautiful sound but it doesnt look like the fitment is anywhere close?
@TermiteOffroad2 жыл бұрын
It’s not bad, could be a little better but nothing worth doing much about. It’s been doing great and has made a huge difference!
@pilotwings21072 жыл бұрын
@@TermiteOffroad Enjoy it man! What tires are you runnin’ on that Pig? those look perfect for what I do with mine.
@jacobivy2854 Жыл бұрын
I recognize that MS tag. Where are y’all at roughly? I’m down in the pinebelt
@TermiteOffroad Жыл бұрын
Collins, about 20min north of Hattiesburg.
@jacobivy2854 Жыл бұрын
@@TermiteOffroad I know the area well. I’m just a couple of minutes south of Ellisville…I find myself frequently spending ridiculous amounts of money at Covington Co. Supply there on 49.
@TermiteOffroad Жыл бұрын
@@jacobivy2854 hahaha yeah I’m about a mile from there. Good friends of ours and I spend quite a bit there to!
@W.M_MotorSport5 ай бұрын
Is that with the stock jetting?
@TermiteOffroad5 ай бұрын
No it’s had Dave’s mod done. I can’t remember the jetting at the moment it’s been a couple years.
@colorado4x4adventures622 жыл бұрын
Hi there Ondrej here just can you hit me up with a link for that exhaust? Thanks!! Sounds great compare to stocks one 👍 hit me up if you ever in Colorado for some trails
@TermiteOffroad2 жыл бұрын
I’m definitely planning to get to Colorado before long!
@@TermiteOffroad awesome! Thanks for the link 👌 let ask you thing about your skid plate , I have the same one and it is so loud buzzing metal to metal that i am about to take it off after just a month or so . Any problems on yours? I got to come up with some rubber bushings between the frame and the skid
@TermiteOffroad2 жыл бұрын
No I’ve never had that problem. A thin rubber washer might help, or you could have something stuck between the plate and the motor maybe.
@colorado4x4adventures622 жыл бұрын
@@TermiteOffroad no it does it from the day one when I put it on . Will figure out something for sure. Can you tell me what it is when ordering that exhaust it is offering me some jetting or something like that? For like extra 18$ do I want it ? What it is?
@JKXTRAILMAN Жыл бұрын
😉👌💪
@tahirusman5929 Жыл бұрын
That snipped front mudguard looks ugly.
@krzysztofs4477 Жыл бұрын
A very weak replacement that does not take into account the construction of the motorcycle.....
@Solo_adv2 жыл бұрын
They've done dyno test on the XR's only pipe versus stock pipe you lose five horsepower except for the very top end which nobody goes to you have to be at 7500 RPMs and no one pushes 7500 RPMs on this bike. It looks good and it's got a good sound.
@TermiteOffroad2 жыл бұрын
I’ve seen the dyno with the header losing hp but not the slip on. Bike runs way better than it did before as far a torque goes.
@spyder328 Жыл бұрын
That was only when the head pipe was added. The slip on was fine.