XR10PRO ESC Programming Features Explained

Share this
XR10 PRO ESC programming features Explained by Ron Schuur
HOBBYWING Software download:
www.hobbywingdirect.com/pages/...
XR10 PRO ESC
www.hobbywingdirect.com/collec...
Programming devices:
WiFi Express Module
www.hobbywingdirect.com/produc...
LCD program box
www.hobbywingdirect.com/produc...
www.HobbywingDirect.com

[@treverlund1948]

thank you so much for this. vid. I'm pulling my hair out trying to understand all that stuff (new to hobbywing) this really helps.

[@matthewbentley1537]

Can we have a video going over the timing settings please. Be nice to have low grip to high grip settings explained . Thanks nice video but needs more

[@billderas3420]

Thanks Ron.

[@YYCRCFabricationz]

Very cool & excellent explanation

[@henryv8]

Is the OCRC background pit noise part of the UI?

[@drakunusrcmaniac8708]

Hi...is it possible to do programm this device without LCD Box or WiFi Module? At least set a certain preset Mode ( practice etc.)?

[@Kerk10W]

Will this firmware works on the V3.1? Also along with the wifi Express? Cheers!

[@floridalife7877]

How do you get it in blinky mode?

[@nothingbasic]

Interesting how what he says in relation to drive frequency and heat contradicts the software

[@ganleongdriftrc_rwd8408]

what is the best setting for Drifting ?

[@troyclayton4171]

Can't get my xr10 out of race mode any help?

[@CarminesRCTipsandTricks]

I haven't been a Pro, since 1994!! I've also been out of the Hobby for almost 18 years..... I still hope that someone can help me. I just got a WP10BL60 Sensorless ESC, and a TenShock Sensorless 1750kv, 6 Pole 9 Slot Motor. It's going in a fairly Low Geared Axial Wraith..... Is the 60 Amp ESC going to be adequate for my Wraith, used as a Trail Rig with some Crawling, only momentary bursts of speed - with the 1750kv Motor?? I'm a Disabled Veteran, with very little money, this is the best I can do. However, that 6 Pole TenShock Sensorless Brushless Motor is shockingly smooth! NO noticeable Cogging, SLOW starts!! She's not quite "finished" yet. I'm just crawling around the Apartment with a Battery taped to the Roof!! 😱😜 I'll add, because I am old school, just getting back into the Hobby after an 18 year Hiatus - I STILL run NiMhs!! 😱 7.2 or 8.4 volts only..... That's as much info as I can think of. Will 60A be good? Thanks! Carmine 🚂

[@chicagowebsiteservice8482]

How do you program blinky mode on this ESC?

[@yantopilot]

My esc canot connecting to program card what happen my esc?

[@Tuffenough4u]

Why aren't you guys pointing this toward the 2S SCT market? All I see these on are touring cars... I know plenty of people that are running the 3.1's on their SCT's. Now we have an ESC with a lot more power capability that out-specs the SCT-pro like it isn't there. So what gives?

[@i.p.outdoors3825]

Your explanation for the PWM Drive Frequency at 5:31 does not match the literature on the right. Quite the opposite

[@Everything-ness]

❤ I'm like number 420

[@HOBBYWING-NA]

Share this... www.hobbywingdirect.com/products/xr10-pro-esc

[@superjoint57]

I watched for 10 minutes to have him go through Timing in depth like he did with General, Brake, etc. Well he flew through that & didn’t explain anything!!! 😏

[@Skiddins]

Agreed, the most important parts (if new to these ESC's) and only a couple of the settings skimmed over.

[@Skiddins]

kzbin.info/www/bejne/mZOqo6WLq6iSbqc

[@stephenkamin1345]

"Like we had before......" Thanks for nothing sir.

[@kenmtb]

@@stephenkamin1345 yeah what the heck?

[@stephenkamin1345]

WORST EXPLANATION OF FEATURES EVER. Every feature I had questions about you said "Same as always" or "this is the same" and totally skipped it. Well thanks for the 25% info. Maybe let a user explain the control instead of the programmer.